7_Attachment 23 - NSWCCD-23-TM-2009-61 RevA Boat Example Data Package.pdf

Naval Surface Warfare Center Carderock Division Bethesda, MD 20817-5700

NSWCCD-23-TM-2009/61 Rev A. November 2011

Ship Systems Integration and Design Department

Technical Memorandum

U.S. NAVY BOAT EXAMPLE DATA PACKAGE

by

William L. Potter and Mitchell L. Hurdle

Combatant Craft Division (23)

DISTRIBUTION STATEMENT A: Approved for Public Release; distribution is unlimited.

N S

W C

C D

-2

-T M

-2

/6 R e v

A

U

.S

N a v y B o a t E x a m p le D a ta

P a c k a g e

REPORT DOCUMENTATION PAGE

Form Approved

OMB No. 0704-0188 Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202- 4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.

1. REPORT DATE (DD-MM-YYYY)

15-10-2009

2. REPORT TYPE

Final

3. DATES COVERED (From - To)

4. TITLE AND SUBTITLE

US Navy Boat Mechanical Practices

5a. CONTRACT NUMBER

5b. GRANT NUMBER

5c. PROGRAM ELEMENT NUMBER

6. AUTHOR(S)

William L. Potter and Mitchell L. Hurdle

5d. PROJECT NUMBER

5e. TASK NUMBER

5f. WORK UNIT NUMBER

7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) AND ADDRESS(ES)

NAVSEA Carderock

Surface Warfare Center Division

Combatant Craft Division

2600 Tarawa Court, Suite 303

Norfolk, Virginia 23521-3239

8. PERFORMING ORGANIZATION REPORT

NUMBER

NSWCCD-23-TM-2009/61 Rev A

9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES)

Attn: PEO SHIPS, PMS 325G

Commander

Naval Sea Systems Command 1333 Isaac Hull Avenue, SE Building 197 Washington Navy Yard, DC 20376

10. SPONSOR/MONITOR’S ACRONYM(S)

PMS325G

11. SPONSOR/MONITOR’S REPORT

NUMBER(S)

12. DISTRIBUTION / AVAILABILITY STATEMENT

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

13. SUPPLEMENTARY NOTES

14. ABSTRACT

Naval Surface Warfare Center, Carderock Division, Detachment Norfolk (NSWCCD DN) has developed a set of example drawings to ensure desirable quality and detail in drawing packages received from boat builders who sell boats to the U.S. Navy.

15. SUBJECT TERMS

16. SECURITY CLASSIFICATION OF: 17. LIMITATION

OF ABSTRACT

See 12.

18. NUMBER

OF PAGES

19a. NAME OF RESPONSIBLE PERSON

(Bob Bradford)

a. REPORT

Unclassified

b. ABSTRACT

Unclassified

c. THIS PAGE

Unclassified

19b. TELEPHONE NUMBER (include area code)

757-462-4707

NSWCCD-23-TM-2009/61

iii

Contents

Page

Figures ................................................................................................................................................. iii

Summary

Example Drawings

Appendix A

Distribution

Figures

Figure 1. General Notes & Material List…...…………………………………………………….2

Figure 2. General Notes & Material List ….………………………………….………………….3

Figure 3. Lines & Offsets………………………………………………………………...……….4

Figure 4. Outboard Profile………………………....…………………….……………………….5

Figure 5. General Arrangement..…….……..………………………………………………..…...6

Figure 6. Structural Details (Metal Boat)..…………………………………………………..…...7

Figure 7. Construction Details (Fiberglass Boat)………………………..…………………..…...8

Figure 8. Miscellaneous Details…………………………….………………………………..…...9

Figure 9. Machinery and Steering Arrangement and Details.……………………..…………

Figure 10. Electrical…………………………...………………………………………………...11

Figure 11. Wiring Diagram……………………………………………………………………...12

Figure 12. Wiring Diagram …………………………………………...………………………...13

Figure 13. Wiring Schematic…………………………….....…………………………………...14

Figure 14. Piping System Diagram and Details….....…………………………………………...15

Figure 15. Piping System Diagram and Details..……………………...………………………...16

Figure 16. Hoisting Arrangement and Details..……………….………………………………...17

Figure 17. Hoisting Arrangement and Details……...…………………………………………...18

Figure 18. Label Plates………………………………………..………………………………...19

Summary

The example drawings shown herein are provided for guidance and information to builders offering boats for U.S. Navy service on the General Services Administration (GSA)

Federal Supply Schedule (FSS). This guidance does not supersede any contract requirement.

This guidance is not contractually binding, but reflects accepted practices and Government preference unless otherwise directed in the contract. Consult the contract Technical Point of

Contact (TPOC) for clarification or resolution if any aspect of this guidance conflicts technically with a contract requirement.

The purpose of these drawings is to show the level of detail needed in the as-built drawing package deliverable. These drawings depict hull, mechanical, and electrical (H, M, and

E) discipline examples of various arrangements, views, details, and information required from boat builders when developing the technical data package deliverables for GSA delivered orders for new U.S. Navy boats. The builder is responsible for providing sufficient level of detail for acceptance, operation/training, Maintenance, repair, modification and supply support for the delivered boat.

Example Drawings

I 7 I 6 I 5 r 4 3 2 I

H

G

F

E

D c

B

A

NOTES TO BUILDERS

1. THE PURPOSE OF THIS DRA'W!NG IS TO SHD'W LEVEL OF DETAIL NEEDED IN THE AS-BUlL T DRAWING PACKAGE

DELIVERABLE. THIS DRA\o/ING DEPICTS HULL, MECHANICAL AND ELECTRICAL CH, M, & EJ DISCIPLINE EXAMPLES OF VARIOUS ARRANGEMENTS, VIE'WS, DETAILS, AND INFORMATION REQUIRED FROM BOAT BUILDERS \o/HEN DEVELOPING THE TECHNICAL DATA PACKAGE DEL!VERABLES FOR GSA DELIVERY ORDERS FOR NE\1 U.S. NAVY BOATS. THIS DRA'WING DOES NOT SUPERSEDE ANY CONTRACT REQUIREMENT. THIS DR A 'WING IS NOT ALL -INCLUSIVE AND IS MEANT TO BE USED AS GUIDANCE, THE BUILDER IS RESPONSIBLE FOR PROVIDING SUFFICIENT LEVEL OF DETAIL FOR ACCEPTANCE, CPERAT!CN/TRAINING, MAINTENANCE, REPAIR, MODIFICATION AND SUPPLY SUPPORT FOR THE

DELIVERED BOAT.

2. ANY QUESTIONS CONCERNING THE IMPLEMENTATION OF THIS DRA'W!NG SHOULD BE DIRECTED THROUGH COMBATANT

CRAFT DIVISION, ACQUISITION ENGINEERING AGENT CAEA) POINT OF CONTACT.

3. THE PARTS CALLIIUT BUBBLES AND PARTS LIST DEPICTED IN THIS DRAWING ARE FOR EXAMPLE ONLY, PART NUMBERS AND QUANTITIES SHC\o/N IN THE PARTS LIST ARE REPRESENTATIVE AND DC NOT CORRELATE \o/ITH ANY SPECIFIC VIE'W DR PART ON THIS DRA\o/ING. PART CALLIIUTS MAY NOT BE COMPLETE ON EVERY SHEET. ANY LOGIST!CALL Y SIGNIFICANT ITEMS FOR EACH SYSTEM SHALL BE CALLED OUT IN THE PARTS LIST FOR THE

ASSOCIATED SYSTEM.

4. THIS NOTE INDICATES AN ADDITIDNAL VIE'W DR DETAIL \o/DULD NORMALLY BE REQUIRED. HC\o/EVER THE VIE'W DR

DETAIL IS NOT SHO'WN ON THIS DRAWING TD REDUCE REPETITION.

5, USE OF BUILDER DRA\o/ING FORMATS, TITLE BLOCKS, PARTS LISTS, ETC. IS ACCEPTABLE. ENSURE THAT THE

LEVEL OF DETAIL IS MAINTAINED.

6. ENSURE DRA'WING GRAPHICS AND TEXT ARE SIZED ACCORDINGLY TO SHEET SIZE SO THAT IT IS LEDGIBLE IN

PRINTED HARD COPY FORM.

7. USE THE REFERENCE BLOCK TO CALL OUT OTHER VENDOR DATA OR DRAWINGS AS NECESSARY CE.G. ENGINES, GENERATORS, NON-STANDARD ELECTRONICS EQUIPMENT, ETC).

8. ITEMS SHOWN IN PARTS LIST SHALL BE CALLED OUT IN THE BODY OF THE DRAWING \liTH 1/2 INCH DIAMETER

PIECE BUBBLES.

~. REFERENCES CALLED CUT IN THIS DRA\o/ING ARE FOR EXAMPLE ONLY. REFERENCES ARE REPRESENTATIVE AND DC NOT CORRELATE \o/ITH ANY KND\o/N DRA\o/ING DR MANUAL.

10, IN THE CASE OF CONFLICT IJ!TH THIS DRA'w'ING AND BOAT PROCUREMENT CONTRACT VERBIAGE, THE CONTRACT OVERRIDES THIS DRA\o/ING.

11. THIS DRAIJING IS GENERAL. ANY SPECIAL REQUIREMENTS IJILL BE ATTACHED TO THE MARKET SURVEY REQUEST.

12. STANDARD CONSTRUCTION NOTES APPLICABLE TO THE DRAIJING SHOULD BE INCLUDED ON THE FIRST SHEET.

EXAMPLES1

'SAND SMOOTH ALL SHARP CORNERS AND ROUGH EDGES LIABLE TO CAUSE INJURY TO PERSONNEL DR DAMAGE TO EQUIPMENT TO A 1/32' RADIUS, GIVE SPECIAL ATTENTION TO HOLES AND SLOTS PROVIDED FOR CABLE ENTRY

TO PREVENT CHAFFING.'

'ALL SNIPES SHALL BE 112' x 1/2' UNLESS CTHER\o/ISE SPECIFIED.'

'ALL THREADED FASTENERS SHALL BE CORROSION RESISTANT STEEL, ASTM A276, TYPE 316, UNLESS OTHERIJISE SPECIFIED. ALL NUTS SHALL BE THE SELF-LOCKING TYPE. ONE CORROSION RESISTANT STEEL FLAT \/ASHER SHALL BE USED UNDER EACH BOLT HEAD AND UNDER EACH NUT UNLESS OTHERIJISE SPECIFIED.'

'MATERIALS SHALL BE AS FOLLD'WS, UNLESS DTHERIJISE SPECIFIED''

PLATE AND SHEET - 5086-H116, ASTM B ~~8-01

DRA\o/N TUBING - S086-H3~. ASTM B ~10 EXTRUSIONS - SOB6-Hlll, ASTM B 221

PIPE - SOB6-H3~. ASTM B ~10

CQRRQSJDN RESISTANT STEEL CCRES)

PLATE AND SHEET - TYPE 316L, ASTM A 167

TUBING - TYPE 316L, ASTM A 269

BARS & SHAPES - TYPE 316L, ASTM A 276

PIPE - TYPE 316L, ASTM A 312

13. SHD'W HARDIJARE AND FASTENERS FOR ALL LOAD-BEARING ITEMS AND EQUIPMENT.

14. THIS DRAIJING SHD\o/S BOTH METRIC AND IMPERIAL UNITS DUE TO MULTIPLE BOATS AND CRAFT USED FOR DEVELOPMENT. AS-BUILT DRAIJING PACKAGE FROM THE BUILDER SHALL USE CNL Y ONE UNIT OF MEASURE

THROUGHOUT.

IS. PROVIDE DETAILS NECESSARY TO REBUILD ITEMS NOT AVAILABLE COMMERCIALLY OFF THE SHELF, E.G. MAST, ENSIGN STAFF, TDIJ BITT, CRACSH RAIL, CUSTOM FENDERING,

16. EACH SIJBS GRIIUP SHIIULD BE INCORPORATED AS A SEPARATE DRAIJING IJITH ITS DIJN NOTES AND PARTS LIST.

17. LABEL PLATES SHO\o/N ON SHEET 18 ARE NOT ALL INCLUSIVE, BUILDER IS RESPONSIBLE FOR PROVIDING REQUIRED LABEL PLATES IN ACCORDANCE \o/ITH THE CONTRACT.

18. ANY DRA'w'ING SHEET REQUIRING A LIMITED RIGHTS MARKING SHALL BE MARKED AS SUCH. AN EXAMPLE IS SHD\IN ON SHEET 3 OF THIS DRAIJING. ANY SHEET UNMARKED IJILL BE CONSIDERED UNLIMITED RIGHTS.

1~. 'w'ELD DETAILS SHALL BE SHOWN FOR ALL LOAD-BEARING STRUCTURES AND FABRICATED ITEMS THAT COULD CAUSE

A CONCERN FOR PERSONNEL SAFETY AND MISSION EFFECTIVENESS.

I

7 I 6 I 5

PARTS LIST (QUANTITY FOR ONE BOAT)

ITEM GTY CAGE

NO. REQD CODE

1 8 SF CDML

2 15 SF COML

3 12 Lf COML

4 9 LF COML

5 I Sf COML

6 2 Lf CDML

7 I Lf CDML

8 2 LF COML

2 COML

10 12 COML

PART, NSN DR

IDENTIFYING NO.

NOMENCLATURE DR

DESCRIPTION

PLATE, 0.375' THK

PLATE, 0.1~0· THK

PIPE, 3' NPS, SCH 40

PIPE, I' NPS, SCH 40

SHEET, NYLON, 1/32' THK

ROUND BAR. 1/2' DIA

THREAD ROD,

3/4'-16 UNF -2A

FLAT BAR, t• X 1/4• THK

CAP SCRE\1, HEX HD,

1/2'-13 UNC-2A,

2' LG

MATERIAL

5086 ALUM

5086 ALUM

So86 ALUM

So86 ALUM

NYLON

5086 ALUM

316 CRES

316 CRES

316 CRES

316 CRES

UNIT 'w'T

CLBS>

~.30

2.68

2.57 o.se

0.23

!.SO

0.85

(CONTINUED ON SHEET 2)

SHEET INDEX

SHEET 1 - S'WBS 100 - GENERAL NOTES ' MATERIAL LIST

SHEET 2 - S\o/BS 100 - GENERAL NOTES & MATERIAL LIST CCDNT> SHEET 3 - S'w'BS 100 - LINES & OFFSETS SHEET 4 - S\o/BS 100 - OUTBOARD PROFILE SHEET 5 - S'w'BS 100 - GENERAL ARRGT

SHEET 6 - S'WBS 100 - STRUCTURAL DETAILS CMETAL BOAD

SHEET 7 - S\o/BS 100 - CONSTRUCTION DETAILS (FIBERGLASS BOAT>

SHEET B - S'WBS 100 - MISCELANEDUS DETAILS

SHEET 9 - S\o/BS 200 - MACHINERY & STEERING ARRGT & DETAILS SHEET 10 - S'w'BS 300 - ELECTRICAL SHEET 11 - S\o/BS 300 - \o/IRING DIAGRAM SHEET 12 - S'w'BS 300 - \ollRING DIAGRAM SHEET 13 - S'WBS 300 - \ollRING SCHEMATIC SHEET 11 - S'w'BS 500 - PIPING SYSTEMS DIAGRAMS & DETAILS

SHEET 1S - S'WBS SOC - PIPING SYSTEMS DIAGRAMS & DETAILS

SHEET 16 - S\o/BS 500 - HOISTING ARRGT & DETAILS

SHEET 17 - S'WBS 500 - HOISTING ARRGT ~ DETAILS

SHEET 18 - S\o/BS 600 - LABEL PLATES

4 3

REMARKS

FOR 1' DIA FRICTION IJASHER

REVISIONS

ZCNE E: DE:SCRIPTI[]N BY DATE APPMDVE:D

I THIS DRA'w'ING HAS BEEN GENERATED AND IS MAINTAINED I

BY A CAD SYSTEM. CHANGES SHALL ONLY BE INCORPORATED

AS DIRECTED BY THE GOVERNMENT DESIGN ACTIVITY.

CONCEPTUAL

DRA \.liNG

DISTR!BUTIDN STATEMENT A•

APPROVED FOR PUBLIC RELEASE1 DISTRIBUT!CN IS UNLIMITED.

APPROVAL SIGNATURES fOR THIS DRA'w'ING ARE DOCUMENTED IN AN ELECTRONIC DATABASE MAINTAINED BY NSIJCCD DEl NDRFDLK.

REF

NO.

DOCUMENT TITLE DOCUMENT NO,

REFERENCES

I

H

G

F

E

D c

B

16 I 15 I 14 I 13 • 12 I 11 I 10 I 9

PARTS LIST CCDNTINUED)

H ITEM QTY CAGE PART, NSN OR NOMENCLATURE OR MATERIAL UNIT IJT REMARKS H NO. REQD CODE IDENTIFYING NO. DESCRIPTION <LBSl

11 14 COML \/ASHER. FLAT. 112' DIA 316 CRES -

12 1 TU COML SEALANT, MARINE GRADE VARIOUS - 3H 5200 OR EQUAL

13 I TU CDML THREADLDCKER, VARIOUS - LDCKTITE 242 DR EQUAL - MEDIUM STRENGTH -

14 6 LF 2V507 3461T633 IJIRE ROPE, 1/16' DlA, 304 CRES - FOR USE \liTH ITEM 38 7 X 19 CLASS

15 I PG 2V507 3755TI3 COMPRESSION SLEEVE, 304 CRES - FOR USE IJITH ITEM 38

FOR l/16' DIA \oiiRE ROPE

G 16 3 LF 2V507 1375A53

PIANO HINGE, 2' IJIDE,

316 CRES 0.20

TACK IJELD ONE END OF HINGE G

0.72' THK PIN TO AVOID SEPARATION

17 2 2V507 994BOAI35 SAFETY SNAP PIN. 3/B' DIA. 19-B CRES 2-112' USABLE LG - USE IJ/ITEHS 29 ~ 30

IB I 65063 59 NAVIGATION HORN, 24VDC

19 3 601-6

TERMINAL BOARD, -

26405 6-TERM, 20A

20 1 OEDYI BLHA3025P

ALTERNATOR, 75A,

28.5V, UNGND

21 3 81541 AP-17-1-51-103 CIRCUIT BREAKER,

F 2 POLE, lOA, IJT F

22 5 81541 4AP-17-I-51-153

CIRCUIT BREAKER,

2 POLE, !SA, \IT

23 1 00943 A-1614CHNFSS ENCLOSURE, 16' X 14' X 6', CRES

NEHA 4X

24 1 00943 A-IOPBSS PANEL CRES - -

25 1 55156 702 BATTERY ISOLATOR

26 1 •MMIDI 302SSI-B RECEPTACLE, 3 POLE, 30A

E 27 1 74400 15002 HOUR METER, 1-10000 HOURS HIL-M-3971 E

28 1 50068 MODEL 39 FLOAT SIJITCH L GUARD

29 2 24956 IJIJC-24L-2653 IJINDSHIELD IJIPER ASSY

D D

CAGE CODE

- CAGE NIL MANUFACTURER CAGE NO. MANUFACTURER CAGE NO. MANUFACTURER -

2V507 MCMASTER-CARR SUPPLY CO 8154I PHILIPS TECHNOLOGY 74400 STEIJART IJARNER CORP

473 RIDGE RD AIR PAX PROTECTOR GROUP <HOBBS DIVl

DAYTON, NJ 08810 907 IJDODS RD YALE BLVD L ASH ST

(732) 329-3200 CAMBRIDGE, MD 21613 SPRINGFIELD, IL 62705

65063 FEDERAL SIGNAL CORP 00943 HOFFMAN ENGINEERING 50068 RULE INDUSTRIES INC c 2645 FEDERAL SIGNAL DR 9TH ~ TYLER ST CAPE ANN INDUSTRIAL PARK c UNIVERSITY PARK, IL 60466-3122 ANOKA, HN 55303 GLOUCESTER, HA 01930

26405 MARATHON SPECIAL PRODUCTS 55156 SURE POIJER INDUSTRIES 24956 UNITED TECHNOLOGIES CORP

13300 VAN CAMP RD 10189 SIJ AVERY ELECTRO SYS INC

BO\ILING GREEN, OH 43402 TUALATIN, DR 97062 PO BOX 2228

COLUMBUS, MS 39071

OEDYI PRESTDL!TE ELECTRIC INC •MARCO• MARINE ELECTRICAL PRODUCTS

400 'J MAIN ST ONE DIGITAL DRIVE CDML CIJ1MERCIAULY AVAILABLE ITEM

- ARCADE, NY 14009 NOVATO, CA 94949 -

NOTEo CODES DENOTED IJITH ·~ ~·

ARE NOT STANDARD CAGE NUMBERS,

BUT HAVE BEEN ARB!TRARIL Y SELECTED.

B B

A A

I NAVAL SEA SYSTEMS COMMAND ""I ''"' '"""I ""'" 1:".,.1 11\o'GJIID. I~ r--'" " CCD H 53711 GEN 801 5108788 - ~AWl! I T B. POTTER SCALE:• AS N[]TE:D SH[ET 2 (Jf" 1B

16 I 15 I 14 I 13 ' 12 I 11 I 10 I 9

H

G

E

D c

B

A

BODY SECTION 23-B

LINES AND OFFSETS

SCALEo NONE

4' RAD

CM!N>

21 20

S ATIONS 0

SHEER KNUCKLE 7 11 2

CHINE KNUCKLE 5 J 5+

FAIR BODY J 4 0

1 FT. BUTT. UNE 5 11

2 FT. BUTT. UNE 7 3 2

3 FT. BUTT LINE 7 11 2

STATIONS 0

SHEER & SHEER KNU K 3

UTER HINE KNUCKLE 0 8 6+

INNER CHINE KNUCKLE 0 6 7+

30 IN. WAlERLINE 42 IN. WAlERLINE 0 0 4 54 IN. WAlERLINE 0 4 2 66 IN. WAlERLINE 0 9 7 78 IN. WAlERLINE 1 4 1+ 90 IN. WAlERLINE 2 3 J

DIAGONAL A 0 4 1

DIAGONAL B 0 4 1

OFFSETS ARE GIVEN IN FEET. INCHES AND

19 18

TABLE OF OFFSETS

HEIGHT ABOVE BASELINE

1 2 1 2 J 4 5 6 7 9 2+ 7 7 4 7 4 1+ 7 1 2 6 10 7 6 8-7 6 7 2+

5 0 7 4 10 2+ 4 5 4+ 4 1 5 3 10 6 3 8 5 J 7 2 1 9 1 I 5 0+ 1 J 4 1 4 2 1 5 4 I 7 0 1 8 6+ 3 9 6 2-7 6 1 11-D+ 1 9 I 1 9-0+ I 9 4+ 1 10-6 5 7 3 4 4 0 2 8-0 2 2-6 2 0 7 2 0-1 2 0 5 7 I 0 5 9 4 J 9 7 2 9 4 2 5 2 2 J 4 2 2 6

5 5 4 1 5 3 3 8 1+ 6 3

HALF BREADTHS FROM CENTERLINE

1 2 1 2 3 4 5 6 3 10 4 5 + 5-2-0 5 6 I 5 7 7+ 5 8 5 7 3 I 9 J 2 6 5+ 3 7 4 4 J 5 4 8 6+ 4 11 6+ 5 1 0 I 5 5+ 2 2 4+ 3 J 5 3 11 7+ 4 5 3+ 4 9 0 4 11 0 0 4 J 0 10 7 1 9-4 2 6 J J I 6 J 7 J J 11 0+ 0 10 3 1 7 1 2 9 4 J 8 4 4 4 0 4 8 4 4 10 5 I 3 J 2 0 7 3 7 6+ 4 4 6 4 10 3 5 1 3+ 5 2 3+ I 11 4+ 2 10 1 4 0 4 4 8 5 5 I 4+ 5 4 0 5 4 4

6 3 3 5 1 4 6+ 5 5 5 5 5 1+ 5 7 + 3 5 4 4 J 2 I 2 2+ I 10 7 2 11 2 J 8 I+ 4 2 J+ 4 6-3+ 4 9 0 I 2 4 I 11 2 J 0 5 J 10 4 4 5 2 4 9 1 4 11 6+

EIGHTS TO OUTSIDE OF SKIN. PLUS t.IEANS ADD 1/16 OF AN INCH

7 B 9 10 6 6 J 6 5 7+ 6 5 7+ 6 6 J 3 6 3 3 6 0 3 6 0+ 3 6 0 1 10 5 2 0 1+ 2 1 0+ 2 0 5 2· 0 1 2 I 3+ 2-2- 0+ 2 1 5 2 1-4+ 2 2 3+ 2 3 0 2 2 6 2 2 7+ 2 3 4+ 2 J 7+ 2 3 4 5 4 5 1 5 3+ 5 I

7 8 9 10 5-6- + 5 4-2 5 -2 5 I 5 I 0 5 0 1 4 10 4+ 4 8 5

4 11 6+ 4 II 2+ 4 10 1 4 8 3

4 11 4+ 5 2 3 5 I 5 5 0 1 4 10 2+ 5 4 1+ 5 3 1 5 1 3 4 11 2 5 6 0 5 4 2

4-10 4+ 4 II 1 4 11-0 4 9-5

5 0 5 5 0 J 4 11 6+ 4 10 0+

35 7/16'

SKEG RECESS <P&.S>

~~-=~==~==~~~(~RE~F~G~>----4-------------+-------------~-----------4-------------+------------~------~~~~~~~~~~~~'-~-----4~---~~----~3~5~7/16' BUTT

STERN OUTER

~~~~~~~~==~====+=~~~:;iS==~~~i=~~--~~~~~-----------+--~~~~~~==~~~~~--t-------------~-------------+------+-----~~~::~~~~~~--~~~----Jl~l~l~3/16' BUTT l

8 1/8'

7 1/IG'

59' IlL

47 1/4'

35 1/2' t==~~L1===t~~l=~~c===~t:sc=t~~~t=t=======~====~~====~=====t==~~====~:±~~~~~~~b:::~~====::!::::::j:::::::t::::::t:~~~S::s~~~====~5~7/8' BUTT - ------ ----- i_ OF CRAFT

KEEL/STEM

PART PLAN 19-D

LINES AND OFFSETS

SCALEo NONE

SHEER KNUCKLE

3 2 112 1/2' RAD

RAJ

A

~~~~~471/4'\IL Ill 34 7/16'

JCTEMPLATE

FROM LOFT>

BASELINE OF CRAFT ----------- -----

BASELINE DF CRAFT 10 9 8 7 6 5 3 2 -1/2 STA T!ONS

92 13/16'

NOTE• LOCATE PROPELLER END OF SHAFT SUCH

THAT PROPELLER CAN BE REMOVED V!TH

OUT REMOVING THE RUDDER.

LIMITED RIGHTS

22 21 20

PROFILE 19-A

LINES AND OFFSETS

SCALE• NONE

VIE\IS TAKEN FROM

NAVSEA D\JG 5105251

H

G

F

E

D c

B

_j

G

F

E

D c

B

A

LAZARETTE

HATCH

<REF 4l

LIFTING HANDLE

FLEXIBLE DRAW LATCH

<4 PLACES><REF 5)

<4 PLACES> <REF 5)

SHAFT LOG ACCESS

<REF 4l

29 28 27

REST <URETHANE>

BOAT HOOK·<~P~~S~l~~~"~;;;;~~~~~~;;;;:;;;,.;;"~~;:;:~iji~;:;:;;;;;;;:~~;;~;;~;;;;;;~~~iiii;::;;:~;;:::;;. .. ~~~.-~~::

BOAT HO~K HOLDER

<P~Sl <4 PLACES>

HOISTING FITTING

<REF 9)

t

RECESSED STERN

(REF 1 AND 7>

HOISTING

<REF 9l

ENSIGN STAFF

<REF 4l

HOISTING FITTING

9)

PLAN 29-E

GENERAL ARRANGEMENT

SCALE• NONE

RADIO ANTENNA

<P~S><REF 7l

<P~S>

RADIO

ANTENNA

<REF 7>

CHINE

BRACKET>

HORN

HORN

(loi!TH BRACKET>

VENTILATOR

<REF 5)

eMDDRING

Flo/D HOISTING FITTING

<REF 9)

URETHANE FENDER

<REF 5)

MOORING BlTTe

BOlo/ CHOCKS

('J!TH MAST 502

SOCKET>

NAVIGATION LIGHT

RECEPTACLE

<REF 7>

j A

ANCHOR LIGHT

<REF 7l

MASTHEAD LIGHT

<REF 7>

JACK STAFF

<REF 4l

SOCKET>

FENDER

FREEING PORT

<P!.Sl <TYPl

<REF 5>

~~==f=.!:=::::::::=:§::2E ______ _L__ _____ I _____ ____l_ ______ l____ _____ I _____ ____l_ ______ l____ ____ _j ___ I _____ B~SELINE

B 7 6 5 4 3 2 1 0 -1/2 STATIONS 10

31 30

PRD~ILE 29-A

GENERAL ARRANGEMENT

SCALEo NONE

29 28 27

VIE'JS TAKEN FROM

NAVSEA D'JG 5105253

26 25

H

G

F

E

D c

B

G

F

E

D c

B

A

39 38

COCKPIT FLAT

t

1/4' DIA CRES

ENSIGN STAFF 47 1/4'

CGENL NOTE 10)

CLEAT 3' LONG

5116' DIA CRES

EROSION LINER

1/8' CRES PLATE x 9' IJIDE

FASTEN IJITH CRES FLATHEAD

MACH SCREIJS AT 4' D,C.

CMAXliN TIJD ROIJS

STBD SIDE-HEIGHT

TO SUIT EXHAUST

PORT SIDE -HE!UHT TO

TDP OF OUTBOARD GIRDER

AFT HOISTING FITTING

CREF 9)

FUEL TANK SUPPORT

(2 PLACESlCP!.Sl

RADAR ANTENNA

CSTDIJED POSITION)

<REF 5)

ENGINE COVER

CREF 5)

BDTTDM OF

INBOARD GIRDER

BATTERY LOC~ER

ACCESS PORT ONLY

LIFE JACKET STOIJAGE

ACCESS STBD ONLY

CSTBD ONLY)

PLAN 37-E

GENERAL ARRANGEMENT &. CONSTRUCTION

SCALE• NONE

RED CABIN

LIGHT CPLSl CREF 7l

FOLD DDIJN

IJINDSHIELD

<REF Sl

ELEVATION 37-A

GENERAL ARRANGEMENT L CONSTRUCTION

SCALE• NONE

ENSIGN STAFF, JACK STAFF

STDIJED ON SEAT RISER

CP&.Sl

BHD NO 1

BELDIJ MAIN DECK <CABIN

AND FOREDECK REMOVED)

ACCESS ~

43 3/8' IJATERLINE AND

BELDIJ <CABIN SEATS

AND FLATS REMOVED)

ACCESS

PLATE

FOAM

_,..,.,""""'"'-- - --lt. j OF CRAFT

A

PARTITION

6'

PIN IJ/ LANYARD

BOlo/ CHOCK IJ!TH SOCKET

<REF 3)

CPLSl

VIEIJS TAKEN FROM

NAVSEA D\JG 5105254

H

G

F

E

D c

B

G

F

E

D c

B

A

FREEING P!JRT CP~S)

<G£NL NOTE 10)

TRANSOM STIFFENER

1 1/2' x I l/2' x 3/16' ANGLE

BASELINE

TRANSOM BRACKET 3/16' PLATE 'WITH

CP~S)

TRANSOM

FRAME ~ 1/2

SCALE• NONE

ENGINE GIRDER

6' X 3 112' X 3/8'

3/16' x 2' FLAT BAR CAP CTYP) rRAME 9

LKG F\JD

SCALE• NONE

INTEGRAL FUEL TANK <P~S)

CSEE REF ~)

l TUNNEL. 1/4' PLATE

CSEE REF !)

TRANSOM BRACKET

6' x 6' 3/16' PLATE

12' DIA BDL TED ACCESS

C2 PLACES)

TRANSVERSE FRAME

4. X 2. X 3/16. ANGLE

DR mUIVALENT

ENGINE HATCH ASSEHBL Y

CSEE REF 6)

SHAPE DR \JELDMENT

\JT COLLAR

CSEE REF 6)

TRANSVERSE FRAME

... X 2' X 3/16' ANGLE

DR EQUIVALENT

SHAPE DR IIELDMENT I 1/2' x I 112' x 3/16' ANGLE

FRAME 8 FRAMES 6 2x 7

LKG F\JD

SCALE• NONE

3/16' BOTTOM PLATE

LKG F\JD

SCALEo NONE

PLAN 46-D

GENERAL ARRANGEMENT L CONSTRUCT!liN

PORT SIDE SHD\JN STBD SIDE SIMILAR

SCALE• NONE

SIDE LONGITUDINAL

I 1/2' X 1 1/2' X 3/16' ANGLE

LADDER P!JCKET

3/16' PLATE

KEEL

~T BULKHEAD 5

LKG AFT

SCALE• NONE

CHINE

BULKHEAD STIFFENER

I 1/2' x 1 1/2' x 3/16' ANGLE

TOED OUTBOARD

FRAME 4

LKG FIID

SCALE• NONE

CSEE REF 6)

TOP BO\J SECTION FLAT

FR 3 FR2A FR2

BOTTOM LDNGITUDINALS

I 1/2' X 1 1/2' X 3/16' ANGLE

DOCKING DRAIN PLUG

LOCATE TO SUIT

CGENL NOTE 10>

DECK LONGITUDINAL

I 1/2' X 1 1/2' X 3/16' ANGLE

<REF>

r-

BASELINE

t_ CRAFT

FRAMES

J A i' x 1/1' FLAT BAR COAMING

CGENL NOTE 10)

t.

CRAFT

BULKHEAD STIFFENER

1 1/2' X I 1/2' X 3/16' ANGLE

1/2' x 2' FLAT BAR

ALL AROUND BHD

t.

CR FT

1/2' x 2' FLAT BAR

ALL AROUND BHD

SHEER GUARD

CGENL NOTE 10

BASELINE --------

FRAME 3 BULKHEAD 2A 6u r~D BULKHEAD 2 FRAME

LKG FIID

SCALE• NONE

LKG AFT

SCALEo NONE

LKG AFT

SCALE• NONE

UPPER-TD-LDIIER BO\J SIDE

ATTACHMENT CGENL NOTE 10)

3/16' PLATE

_Jll_C:1:l,::=;~~;:=:~..LJ- - t_ CRAFT

42-D

PORT SIDE SHO\JN STBD SIMILAR

SCALE• NONE

MAIN DECK BO\J ATTACHMENT

ATTACHMENT CGENL NOTE 10)

FRAMES

BO\J BULKHEAD ATTACHMENT

ATTACHMENT CGENL NOTE 10)

LKG AFT

SCALEo NONE

SECTION 41-E

AFT SIDE BHD 2 TOP BO\J SECTIDN

LKG F\JD

SCALE• NONE

UPPER-Tli-LO\JER BO\J KEEL

ATTACHMENT CGENL NOTE 10)

UPPER-Tli-LD\JER KEEL

ATTACHMENT CGENL NOTE 10

1-- FRAMES---

LO\JER BO\J KEEL

ATTACHMENT CGENL NOTE 10) TRIM KEEL TO SUIT

TUNNEL ~ SKEG

I 1/2' X 1 l/2' X 3/16'

ANGLE ON CENTERLINE

1/2' X 4' FLAT BAR

LO\IER B[J\1 SECTION

CENTERLINE STIFFENER

CHINE <SEE REF 6>

LD\JER BO\J BULKHEAD

ATTACHMENT CGENL NOTE 10)

BRACKET

6' X 6' x 1/4' PLATE

48 47

ELEVATION 46-A

GENERAL ARRANGEMENT L CONSTRUCT!liN

SCALE1 NONE

l 112' X l l/2' X 3/16' ANGLE

45 44

VIE\JS TAKEN FROM

NAVSEA D\JG 5104234

ELEVATION 42-A

BD\J ATTACHMENT ARRANGEMENT

SCALE• NONE

H

G

F

E

D c

B

F

E

D c

B

A

56 55

LIST OF DOUBLERS

DECK LAYUP <REF 4) 1ST PL Y-100~~ VIDE

DECK AT 1ST PLY-125~~ VIDE STANDARD 2ND PL Y-150~1'1 IJIDE

SHEER

2ND PL Y-1751'1~ VIDE BONDING 3RD PL Y-200~~ VIDE

3RD PLY -2501'11'1 VIDE <I PLY MAT IN

4TH PLY-3001'11'1 VIDE ANGLE F AYING SURF ACE>

HULL LAYUP <REF 4) DOUBLER

HULL AT

1ST PL Y-1501'11'1 VIDE BELOW 1ST PL Y-2501'11'1 IJIDE 2ND PL Y-2001'11'1 VIDE GJRDERS.CVK

SHEER 3RD PL Y-2501'11'1 VIDE BHDS FLOORS, 2ND PLY-300~1'1 VIDE

4TH PL Y-3001'11'1 VIDE ETC.

1ST PL Y-150~"' IJIDE

7 PLIES

GIRDER l!. 2ND PL Y-200Mrl 'WlDE HOISTING 3RD PLY-2501'1~ VIDE EACH FACE

BULKHEAD CAP SEE DOUBLER NOTE 5 FITTING SEE DOUBLER NOTE 6

SPECIAL NOTES

SN 6-1, DETAILS NOTED 'FOR GUIDANCE' DO NOT REQUIRE STRICT COMPLIANCE,

PROVIDED THE NECESSARY FUNCTION IS MAINTAINED.

SN 6-2. ROUND OFF ALL SHARP DR RAGGED EDGES, L!KEL Y TO INJ URE

PERSONNEL DR DAMAGE EQUIPMENT.

SN 6-3, AS AN ALTERNATE TO GIRDERS FABRICATED IN PLACE AS SHOio'N, GIRDERS

MAY BE PREFABRICATED AND SECURED lo'ITH STANDARD BONDING ANGLES.

SN 6-4. INSTALL CANOPY FASTENERS, ITEM 617, 618. 619, 620, 621. 622 ON

1/INDSHIELD AND CANOPY. PROVIDE ELONGATED POCKET OVER CANOPY BO'>IS

TO ALLOII FOR SHRINKAGE OF CANOPY.

SN 6-5. All RADIUS 1' MIN, EXCEPT AS NOTED, SHEER ASSEMBLY NOTES

I. TRIM EDGES OF HULL AND DECK. SEAL KERFS \liTH VINL VESTER RESIN,

2. SET DECK ON HULL \liTH STRUCTURAL ADHESIVE IN FAYING SURFACE.

SECURE \liTH SELF-TAPPING SCRE\IS, AT 7-7/8' ON CENTERS <MIN>

AS SHOIJN,

3. INSTALL URETHANE FENDER <SEE URETHANE FENDER INSTALLATIDN NOTES>.

DOUBLER NOTES

1, ALL PLIES Of 'JOVEN ROVING ARE 2i DUNCES PER SQUARE YARD

C.B KILOGRAMS PER SQUARE HETERl. PLIES OF HAT ARE ONE DUNCE

PER SQUARE FOOT (,3 KILOGRAMS PER SQUARE METER).

2. FIRST PLY OF BOTTOM LAMINATE SHALL EXTEND AT LEAST 3' BEYOND THE

KEEL BOTTOM INTERSECTION ON EACH SIDE. EACH FCLLO\IING PLY SHALL

OVERLAP THE PRECEDING PLY BY AT LEAST 3/i' FOR A TOTAL OF 10, 14, DR 18

PLIES THRU KEEL SEE NOTE 7 FOR TUNNEL DOUBLER.

3. CLEAT, CHOCK, BITT, RAil BASE AND SOCKET DOUBLERS SHALL CONSIST

OF 5 PLIES. THE FIRST SHALL EXTEND AT LEAST 4' BEYOND CLEAT /CHOCK BASE

IN All DIRECTIDNS. EACH ADDITIONAL PLY OF DOUBLER SHALL EXTEND AT LEAST 3/4' BEYOND THE PREVIOUS PlY.

4. ONE PLY OF MAT SHALL BE USED IN THE FAYING SURFACE OF EACH

SECONDARILY BONDED DOUBLER.

5. GIRDER AND BULKHEAD CAPS HAY USE EQUIVALENT LAMINATE BY LAPPING

EACH PlY FROM EACH FACE OVER TOP OF GIRDER AND ONTO OPPOSITE

FACE AND ADDING ONE PLY 10' IJIDE.

6. DOUBLERS AT HOISTING fiTTINGS SHALL CONSIST OF SEVEN PLIES OF \lOVEN ROVING ON EACH FACE. THE FIRST PLY SHALL EXTEND AT LEAST 20""' PAST THE EDGE OF THE HIGH DENSITY fOAM<OR THE FITTING IN SINGLE SKIN AREAS> EACH ADDITIONAL PlY SHALL EXTEND AT LEAST 3/4' PAST THE PRECEDING PLY.

7. TUNNEL DOUBLER SHALL CONSIST OF 5 PUES,THE FIRST PLY SHALL EXTEND AT LEAST

3' PAST THE TUNNEL/BOTTOM INTERSECTIDN.EACH FCLLO\IING PLY SHALL

OVERLAP THE PRECEDING PLY BY AT LEAST 3/4', AN EQUIVALENT DIIUBLER MAY

BE OBTAINED BY LAPPING THE BASIC BOTTOM LAMINATE FROM EACH SIDE

ACROSS THE TUNNEL-FROM PORT TO STBD THEN FROM STBD TO PORT-TO

ACHIEVE A TOTAL OF 10 PLIES IJR <HINl THROUGH THE TUNNEL

B. THE CHINE AND TRANSOM DOUBLER SHALL CONSIST OF 5 PL!ES,THE FIRST PLY

FROM THE SIDE AND TRANSOM SHALL LAP ONTO THE BOTTOM BY AT LEAST 3'.

EACH ADDITIONAL PlY SHALL EXTEND AT LEAST 3/4' PAST THE PRECEDING PLY, 56 55

ITEM

HULL - BOTTOM, SIDES

AND TRANSOM INCLUDING

CHINE (FOR KEEL

SECllON, SEE DETAIL)

GIRDERS

BULKHEADS. FUEL TANK

SUPPORTS, TRANSVERSE

FRAMES

MAIN DECK, CABIN TOP

COXSWAIN'S STATION'S

FLATS (INCLUDING

HATCHES)

AFT CABIN FRONT, FWD

CABIN BACK, CABIN

SIDES. CONSOLE AND

COAMINGS

STANCHION

ALUMINUM ANGLE

2• X 2' X 3/8'

CTYP>

KEEL DOUBLER

<DOUBLER NOTE

LAYUP SCHEDULE

BLACK GEL COAT BELOW PAINTED WATERLINE

PLATINUM GRAY GEL COAT ABOVE PAINTED

WATERLINE

1 MAT - OUTER SURFACE

3 WR - OUTER LAMINATE

HULL CORE FILLER ~ATERIAL

1/2" THK - STRUCTURAL F~

(AIREX R63.80)

CORE

1 t.IAT - INNER ~INATE

3 WR - INNER LAIMINATE

2" THK - STRUCTURAL F~ CORE

2 WR - EACH FACE

1 t.IAT - BETWEEN EACH CORE FACE AND WR

1" THK - STRUCTURAL F~ CORE

2 WR - EACH FACE

1 t.IAT - BETWEEN EACH CORE FACE AND WR

WHITE GEL COAT

I MAT - OUTER SURFACE

2 WR - OUTER LAMINATE

I MAT - BETWEEN CORE FACE

I" THK - STRUCTURAL F~ CORE

1 MAT - BETWEEN CORE FACE

1 WR - INNER ~INATE

WHITE GEL COAT

I MAT - OUTER SURFACE

2 WR - OUTER LAMINATE

1 MAT - BETWEEN CORE FACE

2" THK - STRUCTURAL F~ CORE

I MAT - BETWEEN CORE FACE

1 WR - INNER LAMINATE

WHITE GEL COAT

I MAT - OUTER SURFACE

2 WR - INNER ~INATE

SECTION 52-A

MISCELLANEOUS DETAILS

3)

DECK

URETHANE FENDER

CGENL NOTE 10)

STANDARD BONDING ANGLE

<SEE LIST OF DOUBLERS)

CHINE

DOUBLER BELOIJ GIRDERS

<SEE LIST Of DOUBLERS)

TYPICAL SECTDN LKG THRU ENGINE SPACE

SCALD NONE

53 52

50 49

ROUND OFF EDGES

<TYPICAL>

1/4' FLAT HEAD BOLT,

t!NISHING \lASHER

AND LOCKNUT <CRES>

C), FLUSH LIFT

V HANDLE, LOCKING

ACCESS HATCH

FLAT BAR <ALUM>

3/16' X 3'

DETAIL 50-G

MISCELLANEOUS DETAILS

ACCESS IN COCKPIT FLAT

SCALEo NONE

MAT ALL AROUND

ON FAYING SURFACE

STRUCTURAL FDAH CORE OVERLAID

IJITH 1 PLY MAT AND 2 PLIES

lo'OVEN ROVING

~I 1/S'i

DETAIL 49-E

MISCELLANEOUS DETAILS

TYPICAL SUPPORT STIFFNER

SCALE• NONE

3 PLIES GLASS CLOTH

GRIND SCARF ON EDGES

DETAIL 49-D

MISCELLANE!IUS DETAILS

FINISHING OF EXPOSED CORE

SCALE• NONE

STANDARD BONDING ANGLE

<SEE LIST OF DOUBLERS>

FOAM CORE RISER 3' x 3'

STRUCTURAL FOAM OVERLAID IJITH

1 PlY MAT AND 3 PLIES 1/DVEN ROVING

DETAIL 49-A

MISCELLANEOUS DETAILS

STRUCTURAL FOAM

TYPICAL FOAM CORE RISER L FLAT CONNECTION

SCALE• NONE

VIEIJS TAKEN FROM

NAVSEA DVG 51D~25o

H

G

F

E

D c

B

64 63

G

F

E

D c

B

A

64 63

62 61 60

TOP Of 'WINDSHIELD

COVER

~~ ~t'MfND~T~TYPl f l_ ____L

TEMPLATE HOLES fROM 9116• x 2" PAD

DISPLAY UNIT CNEOPREND

SECTION 62-F

DISPLAY UNIT FOUNDATION

SCALE• NONE

SECTION 61-F

MAST BUMPER

SCALE• NONE

fLEXIBLE DRA'w' LATCH 604

C2 PLACES)

LATCH KEEPER

CTRIM HI SUIT)

3/16" fLANGED

(ALUMINUM)

(ALUMINUM)

PLATE <ALUMINUM>

lt_DF CRAFT

114• PLATE CALUHl 8'" x s·

1/4" GUSSET CALUHl 3" x 3• C4 PLACES)

DISPLAY

CREF 9)

62f

114• BACKING

(ALUMINUM)

1/4.

HINGED BRACKET

112• SHOULDER BOLT 'w'ITH

LOCKNUT AND 'WASHERS CCRES>

RADIUS MAST BASE

TO ALLD'w' PIVOTING

MACHINE SCREW'S CCRESl

C12 PLACES)

j F

61 1/4.

27 5/B•

19.

DETAIL 61-A

RADAR MAST ASSEMBLY

SCALE• NONE

HINGE PIN

SHOULDER BOLT 'w'ITH

SELF LOCKING CAP NUT

CCRESl

HINGE FABRICATED

FROM ALUMINUM TUBE

DETAIL 60-E

MAST /'WINDSHIELD SUPPORT

SCALE• NONE

SECTION 60-C

MAST LATCH

SCALE• NONE

t.._ c

SECTION 60-A

RADAR MAST RETAINER

SCALE• NONE

r 4.

l

59 58

1/16 THICK CUSHION CNEOPREND

BOND TO PIPE SEGMENT

120• SEGMENT

2" SCHED 40 PIPE

CALUMINUMl 2 3/4" LONG

J

3116" PLATE

<ALUMINUM>

'WINDSHIELD STIFFENER

CGENL NOTE 10l

END FITTING

CGENL NOTE 10)

SECTION 58-D

3/16" PLATE

CCRESlCTYPl

'WINDSHIELD BRACE CONNECTION

SCALE• NONE

MAST MOUNTING PLATE 5/16" DETENT PIN

CCRESlCPROVIDE \J I

CRES 'WIRE ROPE

RETAINING LANYARD)

TUBE CCRESl l 1/4 .. X 0.120"

VIEIJS TAKEN FRDH

NAVSEA DIJG 5105255

DETAIL 58-A

TYPICAL END FITTING

FOR 'WINDSHIELD BRACE

SCALE• NONE

1/B• RAD CTYPl

DRILL AND COUNTERSINK

FOR 1/4" FLAT HEAD

MACHINE SCREW'S

C2 PLACES)

3/4.

H

G

F

E

D c

B

E

D c

B

A

72 71

SPECIAL NOTES

SN 8-1. DETAILS NOTED •FoR GUIDANCE• DD NOT REQUIRE STRICT

COMPLIANCE, PROVIDED THE NECESSARY FUNCTION IS MAINTAINED.

SN 8-2. LOCATIONS OF FITTINGS AND EQUIPMENT ARE APPROXIMATE AND MAY

BE SHIFTED SLIGHTLY TD CLEAR INTERFERENCES DR OBSTRUCTIONS.

SN 8-3. TAPER FOR PROPELLER SHAFT ENDS SHALL BE

.7500 INCH <+.0019 INCH, -.DODO INCHl PER FOOT ON DIAMETER.

TAPER fOR PROPELLER HUB AND COUPLING SHALL BE ,7500 INCH (+,COCO INCH, -,0019 INCHl PER FOOT ON DIAMETER, SN 8-4, PROPELLER HUB SHALL BE 6 INCHES LONG, A SPACER MAY BE

REQUIRED TO MEET SAE STANDARDS FOR HUB LENGTH AND TAPER.

PROPELLER PULLER HOLES ARE REQUIRED.

SN B-5, RUDDER SHELF SHALL BE 3/8" PLATE <ALUMINUM) \liTH FIID AND AFT ENDS fLANGED, LOCATE RUDDER SHELf AS HIGH AS

PRACTICABLE TO PROVIDE MAXIMUM ACCESS TO RUDDER PORT,

SN 8-6. INSTALL A 3/16 INCH DIA X 5/B INCH LONG CRES ROLL PIN IN

THE PROPELLER END OF SHAFT. THE PILOT HOLE IN THE SHAFT

FOR THE ROLL PIN SHALL BE DRILLED AT ASSEMBLY. ALIGN

SUCH THAT KEY DOES NOT RIDE UP THE "CUTTER" SPOON RADII,

SN 8-7, CONTROL HEAD <ITEM NO, 209) SHALL BE PROVIDED \liTH A NEUTRAL

SAFETY S\IITCH, CHROME PLATED BRASS COVER AND HANDLE, AND

ADAPTER KITS FOR MORSE 33 SERIES CONTROL CABLES.

SN B-8, THE ACOUSTIC INSULATION <ITEM 228> SHALL BE 2 INCHES

<MINIMUM> THICK \liTH A LAMINATE OF 12 MICROMETERS <MINIMUM>

MYLAR BONDED TO FIBERGLASS SCRIM CLOTH. THE LAMINATE SHALL BE

BONDED TD BOTH FACES OF THE INSULATION.

SN 8-9. ANTI-CHAFING TAPE <ITEM NO. 225) SHALL BE INSTALLED

IN FAYING SURFACE OF SUPPORTS FOR MUFFLER AND EXHAUST.

SN 8-10. COMPANION FLANGE <ITEM 203) SHALL BE SUPPLIED \liTH

MARINE GEAR. ALL •REF• DIMENSIONS AND PILOT BORE

<NOT SHO\INl ARE CONTROLLED BY MANUFACTURER.

FLOCS COUPLING

AND HOSE FITTINGS

AFT HOISTING

<REF 9)

SHAFT LOG ASSEMBLY

<GENL NOTE lOl

~}!j~R~~BMfJIT~Net_tl~l'~:~lUPPORT <PORT ONL Yl LOCATE TD SUIT

RUDDER ASSEMBLY

<GENL NOTE LOl

EROSION LINER

<REF 4l

72 71

ELEVATION 70-A

MACHINERY ~ STEERING ARRANGEMENT

SCALEt NONE

GEAR

CONTROL

__ ---J-- __ ______.1!t\SELINE

4 STATIONS

68 67 66

BATTERY CONTROL JUNCTION

BOX & BATTERY DISCONNECT

S\IITCH <REF 7l

FUEL TANK <P&Sl <REf 8)

GIRDER EXTENSION IN \lAY Of

STEERING CYLINDER SUPPORT

<PORT ONL Yl <REF 4l fUEL \lATER SEPARATOR

<REF 8)

KNIFE EDGE STRAINER

STEERING

CYLINDER

<REF 8l

TRANSOM EXHAUST

PENETRA TIDN

<GENL NOTE 10>

<REF 8)

FLOCS CONNECTIONS

<GENL NOTE lOl

<PROVIDE ALUMINUM

MOUNTING ANGLE>

SECTION 66-F

MACHINERY ' STEERING ARRANGEMENT

SCALE• NONE

PLAN 66-A

MACHINERY ' STEERING ARRANGEMENT

SCALE• NONE

VIE\IS TAKEN FROM

NAVSEA D\IG 5105256

BILGE PUMP

ENGINE COVER

<DPENl <REF Sl

BUMPER

H

G

F

E

D c

B

~~-------80--------~~--------7-9--------~~-------78--------~~--------7-7------~.~------7~6~------~------~7=5------~~--------7~4~------~~------~7~3-------, G

E

D c

B

A

80 I

@ r---, I I

: fi:

1V1 r---, II 'I"""'B"'I,...LG=E~'"'IB"'IL'"'G"'E,-.,-AU""T"'nl' 1 1

PUMP OFF;I .0. I

ON L T PUMP MAN: V :

r---, I I

: .0. :

1¥1

I

I ON ·I:NAV RUNN!Nn ON L

PORT IJIPE~ OFF BATT PARAL

OFF L TS ANCHOR OFF

DETAIL 79~E

S\IITCH PANEL ARRANGEMENT

SCALE• NONE

r-----., I I I I I I

TACHOMETER

CMECHl

I I _, TERMINAL

I V C5TBD v I I I I I I I I

I TACHOMETER I :

(;;;\ ®:~~: ~_j \::) ,-------, IHlTDPIL~fW:J I ENG OIL PRESSURE I I ENG IJATER TEMP II ALARM -u~

08~~~~1 I GEAR OIL TEMP I I VOLTMETER I r.:: :~~~I

DETAIL 79~A

S'JITCH & GAGE PANEL

DlAGRAMA TIC ARRANGEMENT

SCALE• NONE

79 I 78

BOARD

I

I

P~OPELLE~ EROSION LINE~

USED AS GROUND PLATE

r----L-~ r------

LSSHOF-23

HOISTING/

TD'w'ING

BITT

STRUCTURE

SKEG/V

ST~UT,

SHAFT

ST~UT'

SEACOCK

~UDDE~

ENGINE

EXHAUST

SYSTEM

METAL

COMPONENT

I

STBD

FUEL

TANK

FUEL

FILL

ENGI NE

I

I

AFT

EXTERIOR

METAL

COMPONENT

FUEL

FILL

PORT

FUEL

TANK

I

RADIO

CVHFl

CONTROL

UNIT

AS

APPLICABLE

RADAR

DISPLAY

HOUSING/

FOUNDATION

AS

APPLICABLE

ELECTRICAL SYMBOL LIST

0 SEARCH LIGHT

@ GENE~AL LIGHTING

@ NAVIGATION LIGHTS

8 ~H!J~~E~fG~

® ALTERNATOR

G) ClliL

G) DC MOTOR

@ GREEN INDICATING LIGHT

@ RED INDICATING LIGHT

@ HOURMETER

§ STARTER RELAY

§ BATTERY PARALLELING RELAY

@ VOLTMETER

~ }- PINS/SOCKETS

~ ~ECEPTACLE/S\IITCH

@] RECEPTACLE

[)I PLUG

F\ID

PO~T

EXTERIOR

METAL

COMPONENT

TRANSCEIVER

HOUSING

(3)

AS

APPLICABLE

DIMMER

SIJITCH

CONNECTION BOX

'WARNING BUZZER

MANUAL DOUBLE POLE -DOUBLE THRDIJ S'w'ITCH

MANUAL DOUBLE POLE SINGLE THRD'w' SVITCH

MANUAL DOUBLE THR0\1 SII!TCH

MANUAL SINGLE THRD\1 S\IITCH

MOMENTARY S\IITCH CONTACT

MECHANICALLY ACTIVATED SIJITCH

PRESSURE S\IITCH, NORMALLY OPEN

TEMPERATURE SIJITCH, NORMALLY OPEN

FLOAT S'w'ITCH o--1.-o CIRCUIT BREAKER

= FUSE

ALL OTHER

ELECTRICAL/

ELECTRONIC

COMPONENT

I

COMMON BONDING

CONDUCTO~ LSSHOF-23

BRANCH GROUND

CABLE

LSSHOF-23

CTYPl

ELECTRICAL

CONTROL

e.

DISTRIBUTION

PANELS

RADAR

MAST L

HINGED

BRACKET

STEERING L

ENG CONTR

COMPONENT

F'JD STBD

EXTERIOR

METAL

COMPONENT

F'w'D

HOISTING

LUG

ASSEMBLY

LA~GE

BELO'J

DECK

METAL

COMPONENT AS

APPLICABLE

DETAIL 75~A

TYPICAL GROUNDING SYSTEM

SCALD NONE

I VIE\IS TAKEN FROM

NAVSEA D\IG 5105257

I

I NAVAL SEA SYSTEMS COMMAND ""I ''"" """' I ""'" I'""' ..... "· I'EV

r'""""'' ... CCD H 1537111 GEN 801 5108788 - ~DD IT B. POTTER SCALE:• AS N[]T~D SH[[l lC [Jf lB

74 I 73

H

G

F

E

D c

B

F

E

D c

B

A

CONTD SH X

ZONE XX-X

L_ 1A<POSl - ___:__ -1A<PDSl

1A<NEGl - 2 -1A<NEGl

DP-24P-A

2C/14 AIJG

DP-24P-B -

L 1B<POSl - 3 -IB<PDS

1B<NEGl ----:;- -IB<NEGl

2C/14 AIJG

c=1C<POSl - ~ -IC<PDSl

1C<NEGl - 6 -IC<NEGl

DP-24P-C

2C/14 AIJG

,-----------LD<POSl<D - 7 -ID<PDSl(!)

DP-24P-JD(l)

4C/16 AIJG

DP-24P-LD<2l

4C/16 AIJG

~ 1DCPOS><2>- 6 - 1D<POS><2> ---------,

~ 1D<POS><3>- ~ - 1D<POS><3> ---------.,1

~ lD<POSl<4l- 10 - 1D<POS)(4l ---------.,1 lD<NEGl(l) ----, 11 -1D<NEGl(l)

~ LD<NEGl<D __/- ~ 1D<POS)(5l- 12 - 1D<POS)(5l -------.J

~ lD<POSl<Gl- 13 - lD<POSl<Gl -------.J

1D<POS)(7l- 14 - lD<POSl<7l -------.J

<LCT 'WITHIN CONSOLE>

24 VOLT DC SIJITCH PANEL

0 PORT §6 .,

'WIPER ~~

9 99

LJ I ll l ll

DP-24P-2J<2l

4C/16 AIJG

DP-24P-2J(I)

4C/16 AIJG

(LCT AT CONSOLE>

2J<NEGl<D 2J<POS)(2l 2J<POSlC3l ..::!--- 2J(PDSl(4l

TERM I - PARK

TERM 2 - SLOIJ

TERM 3 - FAST

J

2J<NEGl(J) 2J<POSl(5l JL__ 2J<PCSl<6l 2J<PCSl<7l

J M

PORT

-H[][]K-UP 'WIRE

14 AIJG

24 VOLT DC DISTRIBUTION PANEL

II I I I I I I II

84 83

----2F(POS) - 1 -2nPOS

----2nNEGl - 2 -2F<NEG

2G<POS) - ~ -2G<POSl ~

----2G<NEG> - 4 -2G<NEG

----2H<POS) - 5 -2H<POS

~-------l -

----2H<NEG> - 6 -2H<NEG

----2J(P0Sl - 7 -2J<POS

----2J<NEG> - 6 -2J<NEG

----2K<POS> - 9 -2K<POS

----2K<NEG> - 10 -2K<NEG - -(+)~===t====~c=====i=====~====~====~

XX

BOAT SERVICE

24P-BS<-

IC 2AIJG

SPARE

15A

, I I

G

CJ L.J

"' ru

CABIN

LIGHTS

'WIPERS SEARCH

LIGHT

VHF AFT BILGE

RADID PUMP

LHDCK-UP IJIRE

14 AIJG

<LCT 'WITHIN CONSOLE>

~ CABIN LT

I I I I I I I

I, G ., G ., G "' G

CJ "' CJ "' CJ "' CJ "' ~ ~

Q. z Q. z

"' "' ~ ~ ~ ~ "' "' r-- TRIM CONTROL<+> ~TRIM CONTROL<+> -- 1C/I4 AIJG

STBD TRIM PORT TRIM

TAB TAB

<LCT AT CONSOLE>

NAV

HORN

RADAR

TRIM CONTROL PIJR 24P-TCP(+)

IC/14AIJG

XX

BOAT SERVICE

BATTERY SIJITCH

r--, BOAT SERVICE BTRY 24P-BSB(+) r------;::;-

2/0AIJG

2/0AIJG

f--oH r--f--o (+)

I--""" BOAu._T......,. SER1.UioVIC*:2E/~O~~T..,R~Gy__.2=4P--......,BSB>.::<--L.t-o (-)

L-~ ~

BOAT SERVICE

24VDCP~~~ATIVE BATTERY BANK

DETAIL 85-A

TYPICAL ELECTRICAL IJIRING DIAGRAM

SCALE• NONE

TRIM TAB CONTROL POIJER

<LCT AT CONSOLE>

XX

PORT STBD

TRIM TAB ~ ~ ~ ~ -2J<ST

CONTROL SIJITCHES

(LCT AT CONSOLE>

8 ~ '---r

L_2J<ST

PORT

TRIM PUMP

1/~

I

,-----+--- 2H<NEGl-)

2H<PT

2H<PT

PU

PRl

PR>

PL>

r-- 2H<POSl ~ ~ ,....2H<PTP~u r7 ..__ _r -2-HI<PTPR>

RELAY RELAY L_ _______ __J

XX

XX

82 81

R-GPSl

DP-24P-F

2C/14 AIJG

DP-24P-G

, 2G<POS)(l> ---,----('1 NAV HORN c___2G<NEGl<D ~

2C/14 AIJG

DP-24P-H

2C/14 AIJG

DP-24P-J

2C/14 AIJG

DP-24P-K

2C/14 AIJG

g:-~·~ 2K<NEG>

CABIN LT

STBD TR M CONTROL 4P- T

2C/12AIJG

STBD

TRIM PUMP

In:'..Ell •T B, POTTER

H

G

F

E

D c

B

95 I 94 I 93 .. 92 I 91 I 9o I 96

H

G

F

E

D c

B

..----1- IACDCBLK)(-) -0---- 1AC3)Cio/HT>C+) J

=>--CSW'El

AFT BILGE PUMP/FLOAT

CLCT IN ENGINE COMPARTMENT>

L1AC4)(-)

3TB I

CLCT lo/ITH!N CONSOLE> I I

I

' / --0---- lA(l)C+)

BILGE

BILGE PUMP ON/Off /AUTO SWITCH CLCT AT CoNSOLE>

ON ~

PUMP ON

lA(l)C+) __/

I

<}-J I l ACPOS) _j

G--+t--- l ACNEG) OfF

?\ AUTO r\-

1AC2)(+) _)

XX

.-1AC3)(-)

2 I 3 I VHF ANTENNA

I I

Q J: ~ ~

~/ R-RA-001

CSW'El

XX

SEARCH

LIGHT

JUNCTION BOX

CS\o/El

-rr

DP-24P-A

2C/12AW'G

ANT

PWR

VHF

RADlO

ACC

ICCPOS) _j

ICC NEG)

n

Il

DP-24P-B

2C/12AW'G

DP-24P-C

2C/12AW'G

CONTD SH X

ZONE XX-X

H

G

F

E

D c

B

A

96 95 I

94 I

DETAIL 93-A

TYPICAL ELECTRICAL W'lRlNG DIAGRAM

SCALE' NONE

93 92 I 91

A

I NAVAL SEA SYSTEMS COMMAND ""I """' """I """

·•~ n CCD H 153711 GEN I

SWJI I 11\tG tel, lfiE:V

801 5108788 I - IUt.Ell ., B, POTTER SCALE':I liS N[]T£D SHE[T 12 DF" 18

I 90 I 89

104 103 I 102 101 • 100 I 99 I 98 I 97

H H

TD CDNSDLE K-PC2 <LSMNIJ-7)

~ gg t:; ~ gJ ;:!;

w

"' 0 u u u u u u <[ u c.. - c.. c.. c.. c.. D.. c.. "' w XX - I A I B c I D E IF G H I I J

Pl

I A I B c I D E I F I I J I Jl G H

~ G ~ ~ ~ gJ ... K-PC5 <LSTNIJ-3) G ll ~ c 0 CPC101,102, 109) u u u u u u TO STARTER MDTER -- -- --

D.. D.. D.. D.. c.. w

I .

I \ :1 0 0

PC!Ol 1 PC!Ol

K-PC7 CPC104,11D

TO TSI PC114

PC102 " \ -

K -PC! <LSMN IJ -7)

"' 2 PC102 BS(+) lo I PC115 CTO CONSDLD

I LSSHDF-23A I 01 I

I I

PC103

I I

PC103 3 /Pc1o3 AUTO CBl ..

I 'I

I s

I

PC104

u

I I / K-PC6 <LSDN\"13) <PC104 ,liD c..

PC104 4 + I BS<-> u ~ TD PSI ~ D..

vG ~ _/ " " v u "' "' PC116 + ~ c..

XX

~ /Pcto5 ~ " v ~

5 § "' VI 2TB1 s ( "' "' v u u 0 ( ~ o/ - c.. c.. - 6 /Pcto6

:UTD~ /

75A

~ ru "' .. lfl "' v CE 0 ()---I--< ~ 0

HDURMETER PC104 PC107 7 PC107 IB ~

/ / PC103 ;:!;

E

CE2 ?

~ u E + ~....___., c.. BCJB-24P-DP CLSDN\1-75>

PCIOB 8 PCIOB v TD PIJR DISTR PNL

I

I

"' "' -'.. I BS(-)-24P-BCJB

I I <LSTNIJ-3><PC104,10tl09> v;

(\ "' PC116

"' "' PC109 9 PC109 K-PCB

LSSHDF-';;J

BSC-l CLSSSGU-75>

TO PS2 __. XX PC104 I I GC->

I I PC104 ,.... 10 / PC104 I G<->

BSC+l

PC107 PC Ill 11 /Pc111 BSC+l

1 4

D

D '-f-o

PC103 ~ 7

CR3

PC108 ~ BSC+> AI LSSSGU-200> \

XX

- EC!Ol 14 XI / -EClOl PC114

"' lfl I I

2,.../ JG-24P-BCJB <LsDNIJ-75)

I

REMOTE PERMIT/

I s s

I GC+l TD ALTERNATOR

LOCAL START EC102 15

u u X2 --EC102 c.. c.. PC116 --, S'w'ITCH

I I I CCSD XI ) X2 c I I ~ I A2 3 LSSSGU-200 c ~ '~·-· PCIOl

VIEVJ

CR2

~I ~AI A2

a-E-o ARALLEL BATTERY~ RELAY ISOLATOR XX

BACK CR2

- ~ PC102 DOOR FRONT VIE'W - PANEL - --- -- --

0 0

TO SUPPLY BATTERY

CONTROL BSC+l-24P-BCJB CLSSSGU-200) lTEl RELAY Tn I'"Nr.TNI'" !;:TIIRT lliiTTI'"RY lli'"(+)-P4P-Iln!;:( !;:!;:!;:r;L -Pnn)

B

(CRD

TO ENGINE START MOTOR BDS-24P-Nl(+)(L SSSGU-200) B -- -- r-- -- K -ECl CLSSHDF -3) TO EM JB Pl I

K -EC2 <LSDNIJ-3) TD PS3 K-EC3 CLSSHOI'"-3l TO ALTERNATOR BATTERY DISCONNECT S'o/ CBDSlJ

XX MTD NEAR BC.JB

DETAIL 103-A DETAIL 99-A

BATTERY CONTROL JUNCTION BOX

ENGINE MOUNTED JUNCTION HDX CEHJBJ INTERNAL 'WIRING DIAGRAM

INTERNAL 'WIRING DIAGRAM SCALE' NONE

SCALE• NONE

A A

VIE'WS TAKEN FROM ' I NAVAL SEA SYSTEMS COMMAND .,,.

"""'' NAVSEA D'WG 5105257 l80ilslos7'ss l'~v r,..,_," ccn H 53711 GEN lm.ED 1'1' 8, POTTER SCALE:1 AS NCTED S:I-4E:£T 13 DF lB

104 103 I 102 101 ' 100 I 99 I 98 I 97

112 111 110 109

G

108 107

KNIFE EDGE

STRAINER

3/B'

EMERGENCY FUEL SHUT OFF

VALVE <P!.S) <REF 6)

FUEL TANK <P!.S)

<GENL NOTE 10)

10)

FUEL FILL AND SOUNDING

<P8.S> <GENL NOTE 10)

HOSE

NOTE• SYSTEM Tll BE 3/ 4' DD X 0.060' II ALL CRES TUBE.

H

G

F

E E

LEGEND

D -<v- 2-IIAY BALL VALVE @

4- 3-\IAY BALL VALVE 0

Lqr

II (\(VII

2-\IAY BALL VALVE

II/MECHANICAL SHUTOFF -¢-

ID SCOOP STRAINER

D OVERBOARD DISCHARGE -¢-

~ FLEX HOSE AND CLAMPS ~

101 ~ SEACDCK

c

[)+<J GATE VALVE ~

- ---t?-N S\IING <DR LIFTJ CHECK VALVE

<SEE NDTE 3)

1)::-:l HOSE VALVE \1/CAP & CHAIN B r,t, FLAME PROOF VENT 0

B cr BILGE PUMP, ENGINE DRIVEN ~

Db BILGE PUMP, ELECTRIC ~

W'!TH FLOAT SII!TCH

t:i5:J

A

112 111

SEA \lATER STRAINER

KNIFE EDGE STRAINER

FIRE RESISTANT HOSE AND FITTINGS

FILTER <HYDRAULIC)

FUEL \lATER SEPARATOR

CHECK VALVE <HYDRAULIC)

CHECK VALVE <SPRING LOADED)

<HYDRAULIC)

HDSE <HYDRAULIC)

PRESSURE RELIEF VALVE

<HYDRAULIC)

MANUAL PUMP <HYDRAULIC)

PRESSURE GAUGE

MANUAL BILGE PUMP

BILGE SUCTION STRAINER

'U' VALVE

<BUNA PLUNGER>

SEACOCK \liTH

THRU HULL FTG

TAP INTO ENGINE FRESH

\lATER CODLING SYSTEM lfrc~~p~uJ~ PRIMING

<DIAGRAM 98-A)

DIAGRAM 109-A

SEA \lATER SYSTEM !. CABIN HEATER

SCALE• NONE

109 108

CABIN

HEATER

DIAGRAM 106-E

FUEL SYSTEM

SCALE• NONE

THRU HULL

CONNECTION

<BRONZE> <TYPJ

1/2' IPS BILGE PUMP PRIMING LINE

FROM ENGINE SEA \lATER SYSTEM <DIAGRAM 101-Al

DIAGRAM 106-A

BILGE SYSTEM

SCALE• NONE

VIE\IS TAKEN FROM

NAVSEA D\IG 5105258

SIIING DR LIFT

CHECK VALVE

BILGE SUCTION STRAINER

<TYPJ<GENL NOTE 10)

PUMP

D c

B

G

E

D c

B

A

119 118 117

1/2 INCH STREET ELBO\J CCRES>

<STRIPPING AND SUPPLY ONLY>

HALF COUPLING <SCHEDULE 80>

<FULL COUPLING FOR

STRIPPING AND SUPPL YJ

1/4' DOUBLER

PLATE CTYP)

116 115

HALF COUPLING (SCHEDULE 80)

<FULL COUPLING FOR

STRIPPING AND SUPPLY>

COCKPIT FLAT

l 112' IPS PIPE

NOTE• VENT MAY BE LOCATED

IN BRIDGE \JING

VENT LINE

VENT LINE Til

FUEL TANK

l 1/2' PIPE

NOTE• LllCA liONS OF FUEL SUPPLY, RETURN, VENT &. STRIPPING CONNECTIDNS AT TANK

MAY BE SHIFTED TO SUIT PIPING ARRANGEMENTS.

FUEL STRIPPING

1/2' FPT COUPLING

20 1/2'

FUEL

PIPE CCRES> VELD TO ELBO\J

(STRIPPING AND SUPPLY

CllNNECTillNS llNL Y>

DETAIL 117 -F

ALTERNATE TANK CONNECTION

SCALE1 NONE

r---------------------------60 1/4'----------------------------~

STRIKE:R P'LAT£

BOTTOM OF TANK

r------- 30 1/8' -------1

!-------------- 20' I .TYP)

PIPE CCRES) THREAD ONE END

(STRIPPING AND SUPPLY

CONNECTillNS ONLY>

DETAIL 116-F

TYPICAL TANK CONNECTION

SCALE• NONE

FUEL RETURN

1/2' FPT HALF CllUPL!NG

3'

L~~~++---+-3.

STRIPPING LINE 3/16'

ABDVE BOTTOM OF TANK

50 SNIPE

CTYP>

SUPPLY LINE 1/2'

ABOVE BOTTOM OF

STRIPPING LINE

FUEL SUPPLY

112' FPT COUPLING

S\JASH PLATE

(2 PLACES)

FUEL FILL AND SllUNDING

I 1/2' PIPE NIPPLE

STRIKER PLATE

F'w'D

FUEL TANK VENT

112' FPT HALF COUPLING

ALUMINUM

CTYPJ

DETAIL 117-A

FUEL TANK

NOTE• SEE DETAIL 106-F, 108-F AND 109-F FOR

TYPICAL TANK CONNECTIONS.

STBD TANK SHDIIN

PORT TANK OPPOSITE HAND

SCALE• NONE

117 116 115

HOSE CLAMP

C4 PLACES>

DETAIL 114-F

DECK FUEL CONNECTION

PORT ~ STBD

SCALE• NONE

HELM UNITe

CREF 6) . - ~ CHARGE TO 25-30 PSI

DETAIL 113-G

VENT LINE

SCALE• NONE

0-60 1 "'e:r -~

EMERGENCY STEERING

BYPASS VALVE

1500 PSI

TUBE cCRES> 1/2' X 0.060'

<TYPICAL>

DETAIL 114-B

HYDRAULIC STEERING DIAGRAM

HYNAUT!CS SYSTEM

SCALE• NONE

V!E\IS TAKEN FROM

NAVSEA D\JG 5105258

I I

H

G

F

E

D c

B

G

F

E

D c

B

A

FWD LEG AFT LEG

llmPL llmPL

*P.AANUFACTURER* •MANUFACTURER*

*CONlRACT NUMBER• 'CONTRACT NUh.1BER* *TESTING OmCE* 'TESTING OFFICE*

=u:~~~··=-s -=s=ER"'IAL::-:N"'u'"'wa=rn• ~J:u~~·=-s-=s=ER"'LioL,..,.N"'uw'"'a=rn•

• • INSERT APPROP~IAlE • • INSERT APPROPRIATE

INFORMATION

3/16" DIA HOLE_/

DETAIL 127-D

SLING LEG MARKING BANDS

<1 EACH REQDl

LOCATE ON APPROPRIATE LEG

SCALE• NONE

DATE PLACED IN SERVICE:

INFORMATION

f----3 1/4"-----1

RECERTIFICATION ACTMlY:

lP---

DATE TESTED:

DETAIL 127-A

SLING DATA LABEL PLATE

<I REQDl

SCALE• NONE

1/4" RAD

{TYP)

BOTTOM OF DAVIT STRONGBACK

NO PART OF THE BOAT ON A SPACE

500 \/IDE AT CENTERLINE SHALL

EXTEND ABOVE THIS REFERENCE

\liRE ROPE SOCKET

I JIB INCH

DAVIT HOISTING

l l/2 INCH f::'\ LABEL PLATE V <DETAIL 134-Fl

EQUALIZING THIMBLE

l l/8 SINGLE GROOVE

DETAIL 123-A

HOISTING ARRANGEMENT

SCALE• NONE

F\ID HOISTING

FITTING

<DETAIL 123-A)

VIE\IS TAKEN FROM

NAVSEA D\IG 5105259

122 121

H

"'CS""'9'""',.. G

o .. (~ < G'

<l'.J'

DETAIL 121-F

fORCE DIAGRAM

SCALEo NONE

F

E

D

SHACKLE

c

9'-8 5/16"

---+- - - j_.,,,._

112 0 -112 STATIONS

B

A n:'..Ell •T B, POTTER

F

D c

B

A

DECK PAD <TYP>

TOP & BOTTOM

101'11'1 PLATE

<DETAIL 127-A>

BHD NO. 3

<REF 4)

MIG MACHINE SCRE\IS

<6 PLACES)(TYP>

DETAIL 135-D

AFT HOISTING FITTING

SCALE• NONE

135 134 r-r-

EXACT ANGLE & LOCATION

OF DECK PADS TO

GIRDER EXTENSION

IN VAY OF STEERING

CYLINDER SUPPORT

BE DETERIMINED AT

INSTALLATION OF FITTING

<PORT ONL Y><REF 4 AND o)

TOP OF

OUTBOARD

LONGTUDINAL

BACKING

<REF o)

23 718'

DECK PAD

3/8' PLATE

SECTION 135-A

AFT HOISTING FITTING

SCALE• NONE

135 134

2 3/4'

STATION

e

I

TO SUIT SHACKLE BOLT

TO SUIT SHACKLE BOLT

PLATE

F'w'D f-----+- ~ 9/16'

DETAIL 132-E

AFT HOISTING FITTING

LKG AFT

SCALE• NONE

eo

DECK PAD

SCREVS

BRACKET

3/8' MACHINE SCREVS

<12 PLACES>

BHD

SLOT PLATE

SECTION 130-F

AFT HDISTING FITTING

SCALE1 NONE

6 I' PLATE

SECTION 129-G

F\ID HDISTING FITTING

SCALE• NONE

~ 4~/16" / ~~!.~.~yg,~

SOCKET BOLT

DETAIL 133-D

AFT HOISTING FITTING

SCALE• NONE

DETAIL 133-A

AFT HOISTING FITTING

DECK PAD & BRACE JOINT

SCALE• NONE

COCKPIT FLAT

BOSS 7

FILL SLOT IN CABIN TOP

\J!TH BEDDING COMPOUND

11 KINGPOST

9 GUSSET PLATE

CUT SLOT FOR

GUSSET PLATE

BULKHEAD NO. I

DETAIL 131-A

F\ID HOISTING FITTING

SCALE• NONE

F'w'D

VIE\IS TAKEN FROM

NAVSEA Dlo/G 510~2~9

STRUT

11 ~~lo4.sc

LENGTH TO SUIT

SCRE

In:LED •T B, POTTER

H

G

F

E

D c

B

F

E

D c

B

A

144 143

1------------B 11/16' ------------1

THIS BDAT PRDUDL y SUPPORTED BY I

NAVAL SURFACE IIARFARE CENTER.

COMBATANT CRAFT DIVISION,

FDR IN-SERVICE ENGINEERING ~ LOGISTICS 0 2 3/B'

SEE NSTM CHAPTER 583 FOR U.S. NAVY BOAT PROCEDURES

SUPPORT PLEASE GO TO IIIIII.BOATS.DT.NAVY.MIL _j CINSERT HULL NO,lC!NSERT APL NO,l c_____ __ _

~Nil'I.L BIL~ PUW O fMNil.E STDW~f~GE O ri..EL SWNMICi JillD Sltl'lolr'NE

ENSIGN STAFr

STD\o/AGE

3/!fi• U:TTERS

DETAIL 144-G

!SEA POC LABEL

SCALE• NONE

JACK STAF'F'

0 CHAV L1G1T MAST) 0 7/8•

L_ __ n_~_•~ ___ J_j_ liB• LEITERS

EKRGErt::Y TILLLR

ST!JW'AiiE 0

Q EJIIEI«lEJ«:T STEEI«J«l Q ii!CC£SS

JIDJiE Jllll:rpj

ACCE:SS

HOISTING GEAR

INSPECTION

BlLGE: PlMF'

ACESS

I FLDCS

O ENGINE []IL

F'LDCS

GE:AA lliL

EME.-:~CY STEDID«:i f'ICCESS OINSERT 0£11i£:HCY TD..LIR 0 llN UIEJ«iEJC::l TILLER GUmE

ENGINEER'S

LOCKER

DETAIL 143-D

ACCESS & ST!l\JAGE LABEL PLATES

SCALE• NONE

I O litii!HU~

. BILGE PUll' ol

IELL

I 0 B,.TTLE L,.NTIRN 0 I

DETAIL 143-A

MISCELLANEOUS LABEL PLATES

SCALEo NONE f--- 3' -----1 BATTERY BOX --ro 7/8'

L_ ___ A_CC_E_S_S __ ~_jL

LIFE JACKET

STD'w'AGE

~------4'------~

~Nt:HllM S:H~I:KLE: IS F!JR DAVIT !-![]!STING ONLY l

4'

VJD~N~ ~T~~H G J

HOISTING SLING SOI;J<ET TO

DAVIT ANCHOR SHACKLE

DETAIL 142-F

LABEL PLATE

C2 REGDl

SCALE• NONE

141 140

6'

1 ~3/16' ~~w~ HOISTING TEST DATA

\IDRKING L AD 9,000 K LDGRAMS

50/.~~fE~L~~~Jr·~OL~~~J£PG§fMS l AR INSTALL IN CLE V!Eiol ON CDXS\ol

STATION CONSDL

DATE AND PLACE TESTED

AIN 3 112'

E"'

DO NOT DEFACE DR REMOVE J

rcJTE• THE NAVSEA D'-'G ND. IS TO BE THAT ASSIGNED BY

CONTRACTOR FOR THE FINAL CONSTRUCTION DRA\o/ING, DETAIL 140-F

LABEL PLATE

URmDl

SCALE• NONE

~------ 4 5/16' ------11

0 BATT£RY CDNTRCL JUNCTJ[]N 0 ~. 0

L_ ______ •o_x __ c•_c_JB_l ______ ~__j_

~----------------8 1/2'----------------~

CICT -. CKT B OCT C CKT D OCT £ ;+

0 BILGE PUMP CAIIIN L T IWJI[] 11 RADlll lf RADirl lt3 0

El. 1511/lD lCA EL 5AIUJ 2111 EL 15WLD lOA EL 15!1!/UI lilA D.. 15AilD 10A

3/4'

CKT r CICT G CKT H CKT J CKT K 0 f'!NI.'IR f'!CPT /"SVrTCH N~V L T W'SHLD VIPER ~rLS/HDRN 0

E:L SAILII 2A n lCA/UJ 5A n_ 5A/ Lll 3111 n toA/LD GA EL lOAILD SA

1/B• LETTERS ltB• LETTERS

DETAIL 139-E

BATTERY CONTROL LABEL PLATES

SCALE' NONE

1------------5'-----------1

0 0

PROPULSION SYSTEM

BEFORE OPERATION•

- ct!ECtc:

- ct!ECK

- ct!ECK

- !:PEN

- CHECK

- STRIP

- CJ.IE:CK

- 1\!CTr'IT£

- CHECK

- TURN

STARTING PROCEDURE•

IN NEUTRAL.

LEVER DJT

SLIGHTLY

SW'ITCH

SE:CCNllS

SURE W'ITHIN

G

SHUTDO\JN PROCEDURE•

liB•, 3/L6r I. 114• LETTERS MATERI,a.L 1 CRES

DETAIL 138-F

STARTING L SHUTDOIIN

PROCEDURE LABEL PLATE

SCALE• NONE

I

6'

0 BDATALTS ACCOMPLISHED 0

oDD NOT DEFACE DR REMDVEo

114• LETTERS

MATERIAL 1 tRES

DETAIL 137-F

B!lATALT LABEL PLATE

SCALE• NONE

1--------------------------9 7/s·--------------------~

I

I 3 1/2.

l

11 METER LANDING CRAFT, PERSONNEL CLARGD

BOAT REGISTRY NO <TD BE ASSIGNED>

BUILT FOR THE UNITED STATES NAVY

1----------6 718' ----------1

BUILDER,CITY ,MONTH, YEAR *

NAVSEA DRA'w'ING NO

6'

CKT H

CABlN fANS

EL :5A/UJ lA

CKT N

EL :5A/L.D

1-------- 4 1/4. ---------1

PO\IER DISTRIBUTI[JN

PN£1.. <DP>

l/8• L£TTERS

DETAIL 141-D

CONTROL ~ DISTRIBUTION PANEL LABEL PLATES

SCALE• NONE

I--- 2 1/2' --I-l-l o rus~: ol 5Je• . LD 1" fUSE 15A . ------J.-

1/8• LETTEf'!S f

CABIN

HEATER

I 0 R:ING JIU[JY ol

1----3 1/2' ----1-+

O~~=~~E DFF' START 0 3/4'

ENAIILE --+

119• LETTERS

f---- 3' ------1 ENGINE Cl:llLANT P~f£ATER ~

0 ~CEPTAQ..E 0 t• US W£,). PH __l_ 11e• LETTEf'!S

1----------4'------~

I-------------1--+- ILo __ .... _ .. _L_r_NGIN£ __ '_"1JT_ •• _ ... _ __jo 1-=f I 0 ~~GEPiCY RJEL TANK SKJT OfT 0 I

I 0 ~;GEPicr ruEL T.t~NK SHJT oFT 0 I 1/Br LE::TTE:RS

DETAIL 141-A

ENGINE OPERATION LABEL PLATES

SCALEo NONE

I DISCHARGE OF OIL PROHIBITED I THE FEDERAL 'WATER POLLUTION

. CONTROL ACT PROHIBITS THE 2l314 0 DISCHARGE OF OIL DR OILY 'WASTE

INTO DR UPON THE NAVIGABLE

'WATERS DR CONTIGUOUS ZONE

OF THE UNITED STATES

DETAIL 139-D

OIL DISCHARGE LABEL PLATE

SCALE• N!lNE

6'

FILL TrW< STRIPPING P~P. HRlP EACH TM'K <~E #If II T~El llF lllll. ~ATER DIIIR. T BEFUfif:

RU~ING Ert:;N: AND IEFI:RE rn.LIN:i TANKS. 0 rL.EL STRJPPING WL.VES "'-JST IE KEPT a..OSED

AT ALL T~ES wtEN PUJT lN USE.

118~ LETTERS

V~RNING1

DO ICT USE ~ND .C..D AEJlllSOL CN!INISTER 0 DIESEL STIIIMTIICl FLUIDS Til START EICliNE

CNTIIlft PDSITIDN n£ :BYPASS VALVE 1D ~EN PDSITIDN 0

PRII:R TO USJNG nlE EI£RCI:NCY Tll.l..ER

IJARNlNG1

O USE ~L r r:sER~r:~~~~;;o:R ~~~;'"~E EM;INE. O USE t:F 1liE AIM SltJT llff \lll..L DAMAtlE THE: EJIIGINE.

DETAIL 139-A

IJARN!NG ~ INSTRUCTION LABEL PLATES

SCALEo NONE

1 1/4'

__l_

11M LCPCU-101- *

CRE'w' - 3 PERSONS

CAPACITY <INCLUDING CREW') - 20 PERSONS

DETAIL 138-D

114r LETT£R~

MATERIAL 1 CRES

BOAT INFORMATION LABEL PLATE

SCALE• NONE

r-- 2 112' ----j --I-

I 0 SEACDCK 0 I 5/B'

3/1&• LETTERS ---t

I 0 srrfr~~ING 0 I r---3' ----------1

VIEIIS TAKEN FROM

NAVSEA DIJG 5105260

FUEL 0 I

SUPPLY .

BILGE

PRIME

o BOTH o

PORT ___l__STBD

DFUEL RETURND

3/tr.• LETTE:RS

DETAIL 137-A

VALVE LABEL PLATES

SCALEo NONE

2'

_1

H

G

F

E

D c

B

Master Data Index as of dd-mmm-yyyy | Contract: N00024-12-F-22xx | Builder name | Navy Hull Registry Number(s)

As-Built Boat Drawings:

Line

No

Guidance: Revise titles below to match actual drawing titles

Drawing

Number

# of

Shts

Current

Rev

Limited

Release?

Y/N

Initial

Submission

Date

CCD

Review/

Comment

Date

Rev A

Submission

Date

CCD

Review/

Comment

Date

Rev B

Submission

Date

CCD

Review/

Comment

Date

CCD

Accept-ance

Date

Remarks

1 Drawing Index

2 Antenna Arrangement

3 Canopy Arrangement

4 Console Arrangement

5 Control System Schematic

6 Electrical System Diagram

7 Electronics Diagram

8 Foundations (incl weapon, towing and lift fittings, as applicable)

9 General Arrangements

10 Hoisting Arrangement

11 HVAC System Schematic Drawings

12 Hydrostatics

13 Inboard Plan and Profile

14 Label Plate List

15 Laminate Schedule

16 Lines and Offsets

17 Machinery Arrangement

18 MSD System.

19 Other Special Feature Requirements

20 Outboard Plan and Profiles

21 Outfit & Miscellaneous Details

22 Piping Schematic (Fuel, Water, Cooling, Hydraulic, Waste)

23 Shafting Arrangement Drawing

24 Steering Arrangement and Details

25 Structural Arrangements (incl boat scantlings & construction)

26 Weapon Arrangements Drawing

NSWCCD-23-TM-2009/61, Rev A

Appendix A

Master Data Index - Template

A-1

Master Data Index as of dd-mmm-yyyy | Contract:…