Attachment 2 - Specification Response Matrix.pdf
PDF 704 KB Posted
- Attached to
- 60' Dive Support Boat Federal contract opportunity
- Solicitation number
- N6426725Q5016
About this file
This file is a Specification Response Matrix (Attachment 2) for RFQ N6426725Q5016 for a 60-foot Dive Support Boat, which requires offerors to provide specific technical parameters of their proposed vessel design. The matrix includes detailed requirements for physical specifications such as length overall (LOA), beam measurements, height dimensions, deadrise angles, fuel capacity, load specifications, center of gravity measurements, draft specifications, and performance requirements including sprint speed and range capabilities.
The document requires offerors to verify that their proposed inboard diesel engines can achieve the required speed specifications and that the generator size is adequate for all requirements. Offerors must respond to each specification section identified in the matrix and indicate compliance with all specification requirements by entering "Comply" at the bottom. The government states that incomplete responses will be evaluated as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach). Supporting data must be included in Volume I of the proposal as directed.
View the file
Other files for this federal contract opportunity
Show all 27
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
RFQ N6426725Q5016
Specification Item Specification Parameter Offeror Response
(See Note 1)
070-1 Enter Length Overall (LOA): XX.XX (ft) including swim platform
070-1 Enter Length (excluding swim platform): XX.XX ft 070-1 Enter Hull Length (Lhull): XX.XX ft 070-1 Enter Beam Overall (BOA) with fendering: XX.X ft 070-1 Enter Hull (hard) Beam: XX.X ft 070-1 Enter Height, Keel to Fixed Structure: XX.X ft 070-1 Enter Height, Keel to Moveable Structure: XX.X ft 070-1 Deadrise (if any): XX deg at transom; XX deg at Frame 10;
variable 070-1 Enter Total Installed Fuel Capacity: XXX gallons 070-1 Enter Full Load: XX lbs including X% construction or design margin(s) or both 070-1 Enter Full Load Longitudinal Center of Gravity (LCG):
XX.X ft forward of transom and keel intersect 070-1 Enter Full Load Vertical Center of Gravity (VCG):
XX.X ft above baseline 070-1 Enter Full Load Draft to lowest extremity: X.X ft 070-1 Enter Sprint Speed: XX knots (kts) in Full Load 070-1 Range @ 10 knots: XX nautical miles (nm) 233-1 Inboard Diesel Engines - Verify speed required in Spec can be achieved on proposed boat using specified engines.
310-1 Generators - Verify the generator size is adequate to meet the requirements in the specification.
All Dive Support (DS) Boat Specification - Enter "Comply" to agree to comply with all specification requirements.
Offeror's Notes :
ATTACHMENT 2
60 Foot Dive Support Boat
SPECIFICATION RESPONSE MATRIX
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements;
2. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
File details come from the government source that posted it. Updated .