N62742-22-R-1319 AMD0001.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

2. AMENDMENT/MODIFICATION NUMBER

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

RFP N62742-22-R-13 9, 1602243, FY22 P-2005 WORKING DOG TREATMENT

FACILITY REPLACEMENT, JOINT BASE PEARL HARBOR-HICKAM, HAWAII

Amendment no. 000 is continued on page 2

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

NAVFAC PACIFIC

Construction Contracts Branch ( 33) 258 Makalapa Dr Ste 100

JBPHH HI 96860-3134

9A. AMENDMENT OF SOLICITATION NUMBER

N62742-22-R-13 9

1 5

9B. DATED (SEE ITEM 11)

7-Dec-202

14 Jan 2

RFP No. N6274222R1319 Amendment No. 0001

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

1.1 STANDARD FORM 1442, SOLICITATION, OFFER, AND AWARD

• The SF 1442, Price Schedule is replaced with Attachment (1)

1.2 DOCUMENT 00100, INSTRUCTIONS TO PROPOSERS, 1.2 INSTRUCTIONS FOR SUBMITTING

QUESTIONS REGARDING SOLICITATION

• Remove “Ross Yamato, ross.w.yamato.civ@us.navy.mil” and,

• Replace with “Keary Haubner, keary.haubner@navy.mil”

1.3 DOCUMENT 00202, EVALUATION FACTORS FOR AWARD

• Document 00202, EVALUATION FACTORS FOR AWARD is replaced, see Attachment (2).

1.4 DOCUMENT 00800, SPECIAL CONTRACT REQUIREMENTS, PARA 1.4 NOTICE CONCERNING

LABOR RATES

• Remove “State of Hawaii General Wage Decision No. HI20200001, Modification No. 16, Publication Date 11/12/2021” and,

• Replace with “State of Hawaii General Wage Decision No. HI20220001, Publication Date 01/07/2022”, see Attachment (3).

1.5 CONTRACT DRAWINGS

DOCUMENT 00 01 15 – LIST OF DRAWINGS

• PARA 1.2 CONTRACT DRAWINGS: The following drawings, bearing revision date of 8-31-2021, supersede previously issued drawings bearing the same number and title. The revised drawings accompany this Amendment. See Attachment (4).

NAVFAC

DWG NO.

SHEET

NO.

REVISION

NO. TITLE

19089509 M-002 1 MECHANICAL NOTES

19089517 M-402 1 PARTIAL FIRST FLOOR MECHANICAL PLAN – BLOCK 1B

19089518 M-403 1 PARTIAL FIRST FLOOR MECHANICAL PLAN – BLOCK 1C

19089519 M-404 1 PARTIAL FIRST FLOOR MECHANICAL PLAN – BLOCK 1D

19089522 M-407 1 PARTIAL FIRST FLOOR MECHANICAL REFLECTED CEILING

PLAN – BLOCK 1A

19089523 M-408 1 PARTIAL FIRST FLOOR MECHANICAL REFLECTED CEILING

PLAN – BLOCK 1B

19089524 M-409 1 PARTIAL FIRST FLOOR MECHANICAL REFLECTED CEILING

PLAN – BLOCK 1C

19089525 M-410 1 PARTIAL FIRST FLOOR MECHANICAL REFLECTED CEILING

PLAN – BLOCK 1D

19089535 M-420 1 PARTIAL FIRST FLOOR REHEAT PIPING PLAN – BLOCK 1D

19089541 M-603 1 REHEAT WATER SYSTEM FLOW DIAGRAM

19089542 M-604 1 REHEAT WATER SYSTEM SCHEMATIC DIAGRAM

19089545 M-607 1 SURGERY AHU SCHEMATIC AIR CONDITIONING SYSTEM

19089546 M-608 1 SEQUENCE OF OPERATION

19089553 M-615 1 DDC SYSTEM POINTS LIST

19089554 M-616 1 EQUIPMENT SCHEDULES

19089555 M-617 1 EQUIPMENT SCHEDULES

19089556 M-618 1 EQUIPMENT SCHEDULES

19089557 M-619 1 EQUIPMENT SCHEDULES

19089561 M-904 1 REHEAT WATER PIPING DIAGRAM

19089562 M-905 1 REHEAT WATER PIPING DIAGRAM

• PARA 1.2 CONTRACT DRAWINGS: Changes as directed below shall be made to the respective drawings.

Drawings incorporating the directed changes are not issued with this Amendment.

NAVFAC

DWG NO.

CHANGE

NO. SHEET NO./TITLE/DIRECTED CHANGES

19089287 H-002 PESTICIDE-CONTAMINATED SOIL LOCATIONS/RELOCATION

PLAN

(1) At SOIL CONTAMINATION NOTE #4, Line 1: change “SLIT” to “SILT”.

19089245 LP101 LANDSCAPE PLAN -1

(1) At Detail Reference Symbol D3/L-501 for aluminum edging, curved: change

“L-501” to “LP501”

(2) At Detail Reference Symbol D5/L-501 for gravel strip: change “L-501” to

“LP501”

(3) At Detail Reference Symbol C4/L-502 for synthetic turf: change “L-501” to

“LP501”

(4) At Detail Reference Symbol B4+C3/L-502: change “L-501” to “LP501”

(5) At Detail Reference Symbol C1/L-501: change “L-501” to “LP501”

(6) At Detail Reference Symbol D5/L-501 for gravel maintenance strip: change

“L-501” to “LP501”

(7) At Detail Reference Symbol D4/L-501 for aluminum edging, straight: change

“L-501” to “LP501”

(8) At Detail Reference Symbol B4/L-501 for root barrier: change “L-501” to

“LP501”

(9) At Detail Reference Symbol D4/L-501 for bike rack: change “D4/L-501” to

“B1/LP501”

(10) At NOTE #1, Line 1: change “LANDSCAPE SCHEDULE” to “PLANT

SCHEDULE”

19089363 S-005 TYPICAL DETAILS

(1) At Detail C1 TYPICAL SLAB ON GRADE callout for “10 Mil Thick Vapor

Barrier at Interior SOG Edge Only”, delete “Edge Only”.

19089383 A-102 FLOOR PLAN – BLOCK 1A

(1) At the partition separating Vestibule Room 1AC4 from Food Inspection Room

1A11, insert Wall Type indicator for Wall Type 1.

19089392 A-121 COMPOSITE ROOF PLAN

(1) At the two instances where Detail Reference Symbol C1/A-521 is shown at the edge of the roof (plan north and plan east): change “C1/A-521” to “C4/A-522”

19089429 A-532 INTERIOR WALL TYPES

(1) At Wall Type 9A, change description from “Except Soke Wall” to “Except

Smoke Wall”

19089440 A-601 DOOR SCHEDULE

(1) At Door 1A01, Change Jamb Detail from “C1/A-502” to “B1/A-502”

(2) At Door 1B13, Change STC from “35” to “40”

1.6 SPECIFICATIONS

SECTION 01 33 29 – SUSTAINABILITY REPORTING

• PARA. 1.4.4 Third Party Certification (TPC) Documentation, LINE 2: After “sustainability rating of”, delete

“LEED BDC Ref Guide”, leaving “LEED v4 BD+C Certified”.

SECTION 08 71 00 – DOOR HARDWARE

• PARA. 1.2 SUBMITTALS:

At SD-02 Shop Drawings:

(1) Hardware Schedule: add “G” to indicate that the Government is the Approval Authority for this submittal.

(2) Keying System: add “G” to indicate that the Government is the Approval Authority for this submittal.

At SD-03 Product Data:

(1) Hardware Items, add “G” to indicate that the Government is the Approval Authority for this submittal.

• PARA. 2.3.2.5 Hotel Locks, LINES 1-2: Delete “Hotel locks are Logistical Category “B” (Government Furnished and Contractor Installed”.

• PARA. 2.3.6 Keying System, LINE 2: After the last sentence, add “Provide schematic diagram of the keying system.”

SECTION 08 81 00 – GLAZING

• Wind Load Chart: At the end of this Section, remove the Wind Load Chart.

SECTION 12 31 00 – MANUFACTURERED METAL CASEWORK

• PARA. 1.1 REFERENCES: After the references for U.S. General Services Administration (GSA), add the following reference:

"U.S. Department of Defense (DOD) MIL-STD-1691 (1994; Ref F) Construction and Material Schedule for Military Medical and Dental Facilities"

• PARA. 1.2 SUBMITTALS: After “Detail Drawings; G”, include the following requirements:

“Drawings showing layout of casework at 1:20 scale. Indicate details of construction and rough-in requirements.

Indicate cabinet and countertop materials. Verify job condition affecting the work and obtain accurate field measurements for incorporation into drawings. Locate structural members, required utilities and services provided by other sections of this specification, including plumbing, electrical, and telecommunications. Submit details and information necessary for fabrication and installation.”

• PARA. 2.1.1 Design Requirements, LINE 3: After “detail drawings” and before “Construct casework”, insert the following: “Casework items are indicated on the drawings with numbers preceded by the letter “C”. These numbers are Joint Schedule Numbers in MIL-STD-1691.”

NAVFAC

DWG NO.

CHANGE

NO. SHEET NO./TITLE/DIRECTED CHANGES (Continued)

19089465 ID-605 SIGNAGE SCHEDULES

(1) At Sign No. 1A01A, Change Sign Copy from “XXXXXX” to “XXXXXX

Building No. to be Assigned During Construction”

19089490 P-407 PARTIAL FIRST FLOOR MED GAS PLAN – BLOCK 1D

(1) At Office 1A08, Change Room Label from “1A08” to “1B08”.

SECTION 28 10 05 – ELECTRONIC SECURITY SYSTEMS (ESS)

• PARA. 2.4.6.2 Access Control Cards, LINE 4: Delete “Government provided”.

-- End of Summary of Changes --