WC135 Chiller and Pump-1.png

This is a technical specification document containing detailed equipment schedules for HVAC and related building systems. The document, revised September 3, 2009, outlines four primary mechanical systems with specific performance parameters and installation requirements.

The Air Handling Unit Schedule specifies one unit (AHU-1) with a capacity of 13,600 CFM, serving 850 square feet with cooling and heating capabilities. The unit includes external static pressure management, chilled water cooling, and hot water heating based on 14°F delta T conditions at 20°F ambient. The Energy Recovery Unit Schedule details a single unit (ERU-C-1) in summer design/winter standby operation with 8,000 CFM capacity, 1,100 CFM minimum supply, cross-flow heat exchanger, and provisions for variable frequency drive on the wheel. The Boiler Schedule lists two units (B-1 and B-2) each with 600 MBH output, 125 psig steam pressure, and 85-percent efficiency. The Air-Cooled Chiller Schedule specifies one unit (CH-C-1) with 115-ton capacity operating at 10.2 EER with maximum 45°F leaving chilled water temperature. The Air Distribution Schedule includes five distribution locations (S-5 through S-9) with varying CFM capacities ranging from 1,212 to 2,624, all utilizing surface or exhaust returns with VAV or fixed damper control. All equipment specifications include electrical requirements, piping configurations, and installation notes referencing North Carolina energy conservation code compliance and architectural coordination requirements.