19-0119 - Part 3 02282020.pdf

Renovation to Buildings AS710 & AS4000 Project #19-0119

MCAS New River, Jacksonville, NC

Part 3 Statement of Work / Project Program

Table of Contents

CHAPTERS

1. PROJECT DESCRIPTION

2. PROJECT OBJECTIVES

3. SITE ANALYSIS

4. BUILDING REQUIREMENTS

5. ROOM REQUIREMENTS

6. ENGINEERING SYSTEMS REQUIREMENTS

B10 SUPERSTRUCTURE

B20 EXTERIOR ENCLOSURE

B30 ROOFING

C10 INTERIOR CONSTRUCTION

C30 INTERIOR FINISHES

D20 PLUMBING

D30 HVAC

D40 FIRE PROTECTION

D50 ELECTRICAL POWER AND LIGHTING

E10 EQUIPMENT

E20 FURNISHINGS

G10 SITE PREPARATION

G20 SITE IMPROVEMENTS

G30 SITE CIVIL/MECHANICAL UTILITES

G40 SITE ELECTRICAL UTILITIES

F20 SELECTIVE BUILDING DEMOLITION

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 2

1 PROJECT DESCRIPTION A. GENERAL DESIGN INTENT

1. This Design-Build full building renovation effort is to repair damage to critical infrastructure as a result of Hurricane Florence, and to modernize all building systems, including but not limited to:

architectural, civil, landscape, structural, plumbing mechanical, electrical, fire protection, and etc. while adhering to current applicable codes and regulations. For more specific information and complementary information refer to items below and other documents contained in this RFP.

2. AS710 is a 20,624SF dining facility built in 1954. AS710 will be vacated at the time of the renovation. The building condition is inadequate and suffered minor interior and significant roof damage as a result of hurricane Florence. The renovation includes the roof replacement, the expansion and the total upgrading of the kitchen and supporting functions, new office suite, and heads layouts, all the necessary changes to the interior ramps, exterior stairs, exterior patios, sidewalks, vehicular traffic, and associated landscape, to meet accessibility requirements per UFC 1-200-0, comply with ADA guidelines, finishes upgrade, demolition of the existing entry canopy and replacement with a new wider structure with more contemporary aesthetic design.

Provide quantity and type of plumbing fixtures required for the occupancy, use, and functions described for the facilities per the International Building Code (IBC).

3. AS4000 is a 23,988 SF fitness gym constructed in 1993. AS4000 will be vacated at the time of the renovation. The building condition is inadequate and suffered minor interior and significant roof damage as a result of hurricane Florence. The renovation includes the roof replacement, improvement of entry sidewalk and related site conditions to avoid its flooding, new entry office layout, replacement of basketball court wood floor and the racquetball courts walls, minor renovations in selected areas general cleaning and finishes upgrades.

4. Floor plans and as-built for buildings AS710 and AS4000 containing conceptual design are included in Part 6 of this RFP. The Design-Build team must meet with the tenants to confirm the appropriateness of the intended design, evaluate the necessity and propriety of the scope of work indicated, and incorporate all revisions identified as a result of these meetings. Refer to drawings for Design Option(s) criteria.

5. Tenants of AS710 and AS4000 will require the storage of existing equipment and various items in conditioned spaces off-Base. The Contractor shall move the tenant’s equipment and items off Base and back to its original building. The Contractor must coordinate with the user the final location of each item. For bidding purposes estimate the following square footage needs for each building:

a) AS710: 1,000 SF

b) AS4000: 1,000 SF

6. The tenants in both buildings will vacate the buildings during renovation see Workflow Process in Chapter 2.

7. General Statements for the design of Buildings AS710 and AS4000:

a) Fully review all parts of the RFP package.

b) Abate and dispose of all lead and asbestos containing material (ACM) identified during the sampling to be performed in Project 19-0065. For planning purposes, assume the presence of ACM and lead in all associated project buildings.

8. A complete As-Built Drawing Package, to include AutoCAD files, must be included in the final submittal package.

9. Replace the existing fire alarm system with a modern code-compliant Fire Alarm / Mass Notification system.

• For MNS and Fire Alarm control panel- Refer to Part 6, Attachment C4, MCBCL Basewide MNS- FACP Construction Requirement

10. Renovations shall include the following items from UFC 4-010-01 DoD Min Antiterrorism Standards for Buildings:

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 3

a) 3-3.3 Electrical and Mechanical

b) 3-3.6 Walls and Screens

c) 3-11 Exterior glazing

d) 3-12 Building Entrance Layout

e) 3-13 Exterior doors

f) 3-15 Roof Access

g) 3-16 Overhead Mounted Architectural Features

h) 3-19 Emergency Air Distribution shutoff.

i) 3-20 Equipment Bracing

2 PROJECT OBJECTIVES

A. MISSION

The mission of this project is to fully renovate buildings AS710 and AS4000 to maximize the space utilization for improved quality of life, upgrade utilities, and modernize mission critical facilities aboard Marine Corps Air Station New River following damage caused by Hurricane Florence.

B. DESIGN RESPONSIBILITY

It must be the priority for the Design-Build team to acknowledge and exercise its duty to complete field investigations, validate the tenant’s requirements and develop a definitive design to meet the tenants needs while adhering to the project’s site and criteria parameters.

Refer to drawings for design option(s). Provide lay out option(s) that have been field verified against the existing conditions. All the design option(s) must be done by Registered professionals, including but not limited to: Architects, Landscape Architects, Kitchen Consultant, Structural, Civil, Plumbing, Mechanical, electrical, Fire Protection Engineers, etc. The user will at the CDW-meeting(s) evaluate the design option(s) and provide feedback that will lead to the selection of a scheme for construction.

Attention is directed to Specifications section 01 31 19.05 20 in which the Design-Build Contractor is required to undertake a Concept Design Workshop (CDW). The combined Post Award Kickoff (PAK) and CDW meeting must be undertaken in immediate proximity of Marine Corps Base Camp Lejeune; and the Design-Build Contractor must bear all travel, lodging, subsistence and related costs of its personnel, associated A&E personnel, and any others that may require participation.

C. SUSTAINABLE DESIGN

Specific sustainability requirements are found in this document. Meet sustainability to the best extent possible, third party sustainability certification is not required.

D. WORKFLOW PROCESS

1. Buildings AS710 and AS4000 are not dependent on one another. Renovations may occur concurrently.

2. The government requires a minimum of 30 days notification prior to the start of work to remove any supplies or equipment from the facility.

3. All required off-Base storage must be staged and accepted by the Government before the tenants of Building AS710 and AS400 can relocate to other facilities. For building

AS710 only:

a) Tenants of AS710 will re-locate to other buildings.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 4

b) Provide Mobile Kitchen located adjacent to building No. AS901. See site plan.

c) The Mobile Kitchen must be installed and all utilities must be connected and accepted by the Government before the tenants of building AS710 relocate. See chapter three.

d) The Mobile Kitchen must have the following minimum requirements:

• Capacity to prepare about 1,500 meals a day

• Continuous hot water heater supply

• Stainless steel counters

• Aluminum diamond plate floors coved and welded

• Wall materials for easy cleaning

• Code compliant egress doors

• Electrical power connections

• Propane connection

• 8' x 12' walk-in fridge and freezer combo

• Restaurant hood with fire suppression system

• Ice machine capacity: 500 lb/day

• Double-stack convection oven

• 36" griddle

• 6 burner hotplate

• Tilting kettle

• Vegetable prep sink with drain board

• 3-compartment sink with drain boards

• Hand wash sink

• Commercial dishwasher with spray faucet, pre-rinse sink

• All sinks must have garbage disposal

e) The Government requires 10 days for the relocation of kitchen items from Building AS710 to the Mobile Kitchen.

3 SITE ANALYSIS

A. EXISTING CONDITIONS

Buildings AS710 and AS4000 are located on Marine Corps Air Station New River, Jacksonville, NC.

Existing Utilities include water lines, sanitary sewer main, storm water, overhead and underground electric and underground telephone. Existing conditions will be provided post award for reference only. It is the responsibility of the contractor to locate and identify all existing utilities. Provide site surveys done by a Registered Survey Company.

B. SITE WORK

1. Refer to drawings in part 6 attachment A1 and other documents for the scope of site work.

4 BUILDING REQUIREMENTS

A. General notes for AS710 and AS4000:

1. Refer to drawings and other documents for the scope of work (SOW). Provide design option(s) as shown in the drawings. Reference drawings in Part 6 Attachment A1.

2. Fully review this RFP in its entirety, including all attachments and UFC 1-200-01 prior to design start.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 5

3. Review all ESR Sections included in Part 6 of this RFP.

4. Field verify all conditions. Conduct whole building inspection to include structural system, exterior and interior. Any deficiencies noted and not directed for renovation in this RFP must be brought to the attention of the Government for decision.

5. Demolish and replace interior components of the building per demo notes in Part 6 attachment A1.

6. Demolish all interior plumbing, electrical and mechanical components.

7. Plumbing:

a) Review ESR Section D20 and Part 6 Attachments for building specific requirements.

8. HVAC:

a) Review ESR Section D30 and Part 6 Attachments for building specific requirements.

9. Electrical Power and Lighting:

a) Review ESR Section D50 and Part 6 Attachments for building specific requirements.

10. Site Electrical Utilities:

a) Review ESR Section G40 and Part 6 Attachments for building specific requirements.

11. Demolish and Replace all roofs with Modified Bituminous Membrane. Reference Part 5 - Section 07 52 00.

12. Provide new finishes as shown in other documents.

13. Conduct full code analysis to ensure compliance with current codes and standards

14. Power wash all exterior building walls to remove mold, vegetation growth, painted surfaces, etc.

Remove any efflorescence with specifically formulated product for each substrate such as Brick, CMU, Concrete, painted surfaces, etc. Refer to specific notes for finishes required for each building.

15. Replace all exterior windows and doors & hardware. Replace with new as specified in this RFP Provide new rain guards.

16. Provide new striping for parking spaces, crosswalks, non-parking areas, etc. Provide new related parking and traffic signage.

17. Provide site survey in order to provide an accurate topography of the area and assist in correcting drainage issues of the sites. Provide positive drainage of the site to alleviate standing water issues. Refer to specific notes for specific requirements for each building.

18. Repair for cracked and spalling concrete on all exterior concrete structures. Limited application Area-Bid quantities:

a) AS710: 1500 S.F.

b) AS4000: 400 S.F.

19. Mortar and Joint repair includes cracked or deteriorated mortar joints, hairline cracks, loose mortar, incomplete mortar filling, etc. Limited application Area-Bid quantities: a) AS710: 200 S.F.

b) AS4000: N/A

20. Exterior finish:

a) AS710: Paint as described in the drawings.

b) AS4000: Water repellant product that permit evaporation, for example products containing Siloxanes and Silanes.

21. Upgrade sidewalks to meet ADA requirements. Limited application Area-Bid quantities:

a) AS710: 500 S.F.

b) AS4000: N/A

22. Drainage improvements will include underground stormwater piping and/or open drainage swales. Limited application Area-Bid quantities: a) AS710: N/A

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 6

b) AS4000: Connect two (2) down spouts at the front side of building to newly installed buried drainage lines providing positive drainage towards nearby ditches/stormwater system. This RFP includes the install of the buried drainage lines from the down spouts. Grade the site as necessary to provide positive drainage improvements. 300 L.F for bidding.

B. Full building Renovation to Building AS710

1. Demolish all interior plumbing, electrical and mechanical components.

2. Refer to drawings and other documents for the scope of work (SOW). Reference drawings in Part 6 Attachment A1.

3. Field verify all load bearing walls in the kitchen and related support spaces, demolish as many load bearing walls as possible without compromising structural integrity and replace with new structural supports as necessary to facilitate new kitchen and support floor plan layout.

4. Kitchen and Kitchen Support Areas:

a) Shall comply with UFC 1-200-01.

b) Coordinate with the user on kitchen utilization operation and needs to determine the appropriate equipment. The proposed new equipment will be purchased by the owner and installed by the contractor.

c) For planning purposes include in the proposal Walk-in freezer with enough capacity for four (4) 6-foot 3 shelf units and one (1) 4-foot 3 shelf units and a Walk-in refrigerator with four (4) 6-foot 3 shelf units.

d) Dry storage space(s) capacity: coordinate with the user.

5. All under slab piping, sewer and water must be removed and replaced up to 5 feet to the exterior of the building.

6. Provide and install exterior awning fabricated out of metal to be permanently attached to the structure. Pool side, above two exterior windows. Size approximately 16’ depth x 26’-28’ in length.

C. Full Building Renovation to Building AS4000

1. AS4000 the existing walls, floors and plumbing fixtures shall remain in the locker rooms/shower rooms/heads. Demolish and replace all mechanical, and electrical components in these areas and throughout building.

2. Refer to drawings and other documents for the scope of work (SOW). Reference drawings in Part 6 Attachment A1.

3. Demolish and Replace the monument sign at the façade of AS4000. Provide design for the sign to be approved by the user.

5 ROOM REQUIREMENTS

1. Conduct complete building code analysis.

2. Occupant Load Factor per NFPA 101 Life Safety unless shown otherwise in Part 3, Chapter 4 - Building Requirements above.

3. Provide lighting, switches and convenience and data outlets per code, regulation and requirements. Coordinate with user.

4. Special requirements: Refer to Part 3, Chapter 4-Building Requirements for other items not listed in spaces below.

5. All rooms in each building require interior signage, C103004 & E2010.

6. Any variation to existing finishes during the renovation must be confirmed with the Government for accuracy.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 7

Space Name: ENTRY CORRIDOR/LOBBY SPACE

Space Characteristics

Function/Adjacencies: Entrance half Corridor or Lobby space for AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A

Security System Info: N/A

Uniformat Section

Description Qty Size Specific Requirements

C102001 Interior/exterior Doors 1

Interior: Provide wood frame and door (French Style with 15lites to match existing) with side lites of matching design.

Paint.

Exterior: Provide Store Front aluminum insulated doors and Frames Doors and frames factory finished. French style with 15-insultated glass lites.

C102007 Interior/exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C301001 Interior Painting SF Painted finishes to GWB and Wainscot surfaces

C301003 Wall Finish A/R Impact Resistant GWB and Wainscot

C3020 Floor Finish SF Carpet

C3020 Wall Base Finish LF Wainscot match existing height and profile. Paint

C3030 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles and GWB bulkheads (Paint)

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 8

D503090 Other Alarms Mass Notification

D509002 Emergency Lighting and Power A/R Provide means of egress emergency lighting

Space Name: OFFICE SUITE

Function/Adjacencies: Administrative office space for AS710.

Minimum Ceiling Height: First Floor: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A

Description Qty Size Specific Requirements

C102001 Interior Doors A/R Interior: Provide wood frame and doors, French style-Paint.

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C301001 Interior Painting SF Painted finishes to GWB

C301003 Wall Finish A/R Impact Resistant GWB. Paint

C3020 Floor Finish SF Carpet

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 9

D509002

Space Name: HEAD (SINGLE)

Function/Adjacencies: The space is for men’s or women’s restroom areas for building occupants. Provide alcove off main corridor for entry door into toilet facilities. Applies to AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor

Acoustics: Wall STC 45 / Door & Frame STC 42

Access: All building occupants. Do not allow direct views into this area.

Number of Occupants/Workstations:

NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety is to be calculated as part of Business use 1/100 GSF.

Other/Special Req: See part 6, architectural concept for building specific requirement.

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Section Description Qty Size Specific Requirements

C1010 Partitions SF GWB to underside of deck as indicated in floor plans.

C101001 Fixed Partitions SF Moisture resistant GWB on metal studs to underside of deck

C102001 Interior Doors A/R Provide solid core wood doors with stain finish and steel frames factory-primed, field painted.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103001 Toilet Partitions A/R HDPE- floor to ceiling mounted

C103002 Toilet and Bath Accessories

A/R

Include individual mirrors over the lavatories (Minimum 36" high);

STAINLESS STEEL: 1- double toilet paper dispensers per toilet; 1-Coat hook on back of door; Grab bars as required in accessible WC; 1- Soap dispensers per lav; 4- Electric hand dryers ; semi recessed wall mounted trash receptacle.

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C301001 Interior Painting SF Painted finishes to GWB surfaces

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 10

C301003 Wall Finish A/R Impact Resistant GWB. Ceramic Tile Wainscot (from Finish Floor to 7’-0” A.F.F.). Epoxy Paint GWB

C3020 Tile Floor Finish SF 12”x12” Nonslip Ceramic tile; epoxy grout

C3020 Wall Base SF Ceramic tile; epoxy grout

C303001 Ceiling Finish SF 24”x24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems A/R Suspended exposed grid

D201001 Plumbing Fixtures A/R Water Closets - floor mounted – 1.6 gpf electrically operated

D201002 Plumbing Fixtures A/R Urinals - flush valve with automatic flush control

D201004 Plumbing fixtures A/R Wall mounted porcelain sinks

D3040 HVAC A/R Provide supply and exhaust

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR. Provide GFI convenience receptacles above counters- one for every two lavatories.

D502002 Lighting Equipment A/R General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016.

D509090 Electrical Devices Hand/Hair Dryers

Space Name: HEADS (MULTIPLE)

Function/Adjacencies: The space is for men’s or women’s restroom areas for building occupants. Provide alcove off main corridor for entry door into toilet facilities. Applies to AS710.

NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety is to be calculated as part of Business use 1/100 GSF.

Other/Special Req: See part 6, architectural concept for building specific requirement.

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Section Description Qty Size Specific Requirements

C1010 Partitions SF GWB to underside of deck as indicated in floor plans.

C101001 Fixed Partitions SF Cement board to 8-feet AFF and moisture resistant GWB above on metal studs to underside of deck both sides

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 11

C102001 Interior Doors A/R Provide wood frame and doors, French style-Paint.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103001 Toilet Partitions A/R HDPE- floor to ceiling mounted

C103002 Toilet and Bath Accessories

A/R

Include mirror the full length of the counter over the lavatories (Minimum 36" high);

STAINLESS STEEL: 1- double toilet paper dispensers per toilet stall; 1-Coat hook on back of door; Grab bars as required in accessible WC; 1- Soap dispensers per lav; 4- Electric hand dryers ; semi recessed wall mounted trash receptacle.

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C103008 Counters Solid Surfaces with stainless steel under mounted sink.

C3010 Ceramic Tile Wall System Finishes SF 8”x8” Thin- set, Unglazed Ceramic Tile; epoxy grout

C3020 Tile Floor Finish SF 12”x12” Nonslip Ceramic tile; epoxy grout

C3020 Wall Base SF Ceramic tile; epoxy grout

C301001 Interior Painting SF Painted finishes to GWB surfaces

C303001 Ceiling Finish SF Moisture Resistant Gypsum Wallboard with veneer plaster (level

5) finish and epoxy paint.

D201001 Plumbing Fixtures A/R Water Closets - floor mounted – dual function flush valve

D201002 Plumbing Fixtures A/R Urinals - flush valve with automatic flush control

D201003 Plumbing fixtures A/R Stainless Steel under counter mounted.

D3040 HVAC A/R Provide supply and exhaust

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR. Provide GFI convenience receptacles above counters- one for every two lavatories.

D502002 Lighting Equipment A/R General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016.

D509090 Electrical Devices Hand/Hair Dryers

Space Name: BREAK ROOM

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 12

Function/Adjacencies: Break room for AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A

Description Qty Size Specific Requirements

C102001 Interior Doors A/R Interior: Provide wood frame and doors, French style-Paint.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C103008 Counters Solid Surfaces

C103008 Cabinets Plywood

C301001 Interior Painting SF Painted finishes to GWB

C301003 Wall Finish A/R Impact Resistant GWB

C3020 Floor Finish SF LVT

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 13

Space Name: MECHANICAL SPACES

Function/Adjacencies: The space is used for Mechanical, Electrical, Sprinklers, Communications Spaces for both AS710 and

AS4000

Minimum Ceiling Height: No Ceiling- Exposed Acoustics: Wall STC 45 / Door & Frame STC 42 Access: Staff

Number of Occupants/Workstations:

Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Description Qty

Section Size Specific Requirements

C1010 Partitions SF CMU to underside of deck as shown in floor plans.

C101001 Fixed Partitions (Furred Out) SF

Impact resistant GWB on metal studs to underside of deck as shown in floor plans.

C102001 Interior Doors A/R Provide insulated HM doors and Frames Doors Hot-deep galvanized and frames factory-primed, field painted.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C3010 Wall Finish SF Impact Resistant GWB and CMU. Paint

C301001 Interior Painting SF Painted finishes to GWB and Epoxy.

C302010 Floor Finish SF Hardened and Sealed concrete

C3020 Wall Base Finish NA None, see wall finish

C3030 Ceiling Finish Existing Structure: Un-Painted

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016

D503001 Telecommunications A/R compliance with Specification 27 10 00

Space Name: JANITOR’S SPACES

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 14

Function/Adjacencies: Closet for housekeeping supplies.

Special Dimensions:

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics:

Access: Access from corridor FPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety is to be calculated as part of Business use 1/100 GSF.

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Section Description Qty Size Specific Requirements

C101001 Fixed Partitions SF GWB on metal studs to underside of deck.

C102001 Interior Doors 1 Provide wood frame and doors, French style-Paint.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C103006 Utility Shelving A/R 48”wide X 12” deep Utility shelf with mop & broom holder

C3010 Wall Finish SF 8”x8”

Impact Resistant GWB. Ceramic Tile Wainscot (from Finish Floor to 7’-0” A.F.F.) on two walls at Mop sink. Epoxy paint above wainscot and walls not covered with ceramic tile.

C3020 Ceramic mosaic floor SF 2”x2” On two walls at mop sink from finished floor to 7’ -0” Above Finished Floor (A.F.F.)

C3020 Floor Finish SF 8”X8” Ceramic tile

C3020 Wall Finish SF 8”X8” Ceramic tile

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D201004 Sinks 1 30”X30” min Mop Sink and faucet

D203003 Floor Drains 1 min Trap primer. Slope to drain.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. Suspended Fixtures

D5030 Telecommunications A/R compliance with Specification 27 10 00

Space Name: DINING & VIP SPACES

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 15

Function/Adjacencies: These spaces are used as dining rooms and for AS710 including McCutcheon’s Room, Eagles Nest, New River Room, and two VIP Rooms.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42 (UON) Access: Staff

Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: Motorized Ceiling-Recessed Projector Mount, Motorized Projector Screen. 1- 42" monitor wall mount. Provide projector controls, dedicated computer outlet, and HDMI port to projector in close proximity. Coordinate with user at CDW for location of A/V support equipment.

Security System Info: N/A Other: N/A

Uniformat Section

Description Qty Size Specific Requirements

B202001 Exterior Windows Provide windows for natural light emission.

B202004 Exterior Glazing Insulated – Low ‘E’ Glazing or Spectral glazing.

C102001 Interior/Exterior Doors A/R

Interior: Provide wood frame and door (French Style with 15lites to match existing) with side lites of matching design.

Paint. Frosted glass.

Exterior: Provide Store Front aluminum insulated doors and Frames Doors and frames factory finished. French style.

C102007 Interior/Exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C3010 Wall Finish SF Impact Resistant GWB and Chair Rail, match existing height and profile. Paint

C301001 Interior Painting SF Painted finishes to GWB, Base, and Chair Rail.

C302010 Floor Finish SY Carpet

C3020 Wall Base Finish LF 6” Wood Base. Paint

C3030 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles and GWB bulkheads (Paint)

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R Dimmable Lighting: Provide in compliance with UFC 3-53001.

Provide in compliance with ASHRAE 90.1 2016.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 16

E201002 Window Treatment A/R Provide horizontal mini-blinds at all exterior windows with blackout shades.

Space Name: KITCHEN AND SUPPORT AREAS

Function/Adjacencies: This space is used for food preparation for AS710.

Acoustics: Wall STC 45 / Door & Frame STC 42 Access: Staff

Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A Other: N/A

Uniformat Section

Description Qty Size Specific Requirements

B202004 Exterior Glazing Insulated – Low ‘E’ Glazing or Spectral glazing.

C102001 Interior/Exterior Doors A/R Provide aluminum insulated doors and Frames Doors and frames factory finished.

C102007 Interior/Exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R

Provide signage and warehouse markings - Coordinate room signage and markings with the user, UFC 4-44—01, and 29 CFR Part 1910, Occupational Safety and Health Standards.

C103008 Counters Stainless Steel

C3010 Wall Finish SF Ceramic Tile

C301001 Interior Painting SF Painted finishes to GWB and Epoxy.

C3020 Floor Finish SF Epoxy

C3020 Wall Base Finish SF Epoxy

C3030 Ceiling Finish SF Moisture Resistant Gypsum Wallboard with veneer plaster (level 5) finish and epoxy paint.

D201001 Plumbing Fixtures A/R Stainless Steel Sink

D3040 HVAC A/R Natural gas piping

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 17

D50202 Lighting Equipment A/R General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016.

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002

Space Name: CORRIDORS

Function/Adjacencies: Half of Corridor or Lobby space leading to the Kitchen for AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A

Description Qty Size Specific Requirements

C102001 Interior Door 1 Provide wood frame and door (French Style with 15-lites to match existing) with side lites of matching design. Paint

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C301001 Interior Painting SF Painted finishes to GWB and Wainscot surfaces

C301003 Wall Finish A/R Impact Resistant GWB and Wainscot

C3020 Floor Finish SF LVT

C3020 Wall Base Finish LF Wainscot match existing height and profile

C3030 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles and GWB bulkheads (Paint)

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 18

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002

Space Name: BAR ROOM

Function/Adjacencies: This space is used as bar room for AS710.

Acoustics: Wall STC 45 / Door & Frame STC 42 (UON) Access: Staff

Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: Motorized Ceiling-Recessed Projector Mount, Motorized Projector Screen. 1- 42" monitor wall mount. Provide projector controls, dedicated computer outlet, and HDMI port to projector in close proximity. Coordinate with user at CDW for location of A/V support equipment.

Security System Info: N/A Other: N/A

Uniformat Section

Description Qty Size Specific Requirements

B202001 Exterior Windows Provide windows for natural light emission.

B202004 Exterior Glazing Insulated – Low ‘E’ Glazing or Spectral glazing.

C102001 Interior/Exterior Doors A/R

Interior: Provide wood frame and door (French Style with 15lites to match existing) with side lites of matching design.

Paint.

Exterior: Provide Store Front aluminum insulated doors and Frames Doors and frames factory finished. French style with 15-insultated glass lites.

C102007 Interior/Exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C103008 Counters Solid Surfaces

C3010 Wall Finish SF Impact Resistant GWB and Chair Rail, match existing height and profile. Paint

C301001 Interior Painting SF Painted finishes to GWB wall surfaces.

C302010 Floor Finish SF LVT

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 19

C3020 Wall Base Finish LF 6” Wood Base. Paint

C3030 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles and GWB bulkheads (Paint)

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R Dimmable Lighting: Provide in compliance with UFC 3-53001.

Provide in compliance with ASHRAE 90.1 2016.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002 Emergency Lighting and Power A/R Provide means of egress emergency lighting

E201002 Window Treatment A/R Provide horizontal mini-blinds at all exterior windows with blackout shades.

Space Name: BAR SUPPORT

Function/Adjacencies: Bar Support space for AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual

Description Qty Size Specific Requirements

C102001 Interior Doors A/R Interior: Provide wood frame and doors, French style-Paint.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C103008 Counters Solid Surfaces

C103008 Cabinets Plywood

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 20

C301001 Interior Painting SF Painted finishes to GWB

C301003 Wall Finish A/R Impact Resistant GWB

C3020 Floor Finish SF LVT

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

Space Name: COMM ROOM

Function/Adjacencies: Communications room for AS710.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A

Description Qty Size Specific Requirements

C101001

Fixed Partitions (Furred Out)

SF

Impact resistant GWB on metal studs to underside of deck as shown in floor plans.

C102001 Interior Doors A/R Interior: Provide wood frame and doors, French style-Paint.

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 21

C301003 Wall Finish A/R Impact Resistant GWB

C301001 Interior Painting SF Painted finishes to GWB

C3020 Floor Finish SF LVT

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002

Space Name: OFFICE SUITE/ LAUNDRY

Function/Adjacencies: Administrative office space for AS4000.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A

Description Qty Size Specific Requirements

C102001 Interior Doors A/R Interior: Provide wood frame and doors, French Match Existing style-Paint.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 22

C301003 Wall Finish A/R Impact Resistant GWB

C301001 Interior Painting SF Painted finishes to GWB

C3020 Floor Finish SF LVT

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

Space Name: BASKETBALL COURT

Function/Adjacencies: Basketball court for AS4000.

Minimum Ceiling Height: No Ceiling- Exposed Acoustics: Wall STC 45 / Door & Frame STC 42 Access:

Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A Security

Other: N/A

Section Description Qty Size Specific Requirements

B202004 Exterior Glazing Insulated – Low ‘E’ Glazing or Spectral glazing.

C102001 Interior/Exterior Doors A/R

Interior: Provide solid core wood door in hollow metal frame.

Solid core wood doors with stain finish and steel frames factory-primed, field painted.

Exterior: Provide insulated HM doors and Frames Doors and frames factory-primed, field painted.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 23

C102007 Interior/Exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C3010 Wall Finish A/R Tongue & Groove Panels with .05” Thick Laminate

C301001 Interior Painting SF Painted finishes to wall surfaces

C3020 Floor Finish SF 25/32” Thick solid Maple on top of plywood sub-floor with resilient rubber pads.

C3020 Wall Base Finish NA 4” Resilient Base

C3030 Ceiling Finish SF Existing Structure: Painted

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002 Emergency Lighting and Power A/R Provide means of egress emergency lighting

Space Name: RACQUETBALL COURTS

Space Characteristics

Function/Adjacencies: Racquetball courts for AS4000.

Minimum Ceiling Height:

Acoustics: Wall STC 45 / Door & Frame STC 42 Access:

Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A Other: N/A

Uniformat Section Description Qty Size Specific Requirements

C102001 Interior Doors A/R Provide Store Front aluminum insulated doors and Frames Doors and frames factory finished.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 24

C301001 Interior Painting SF Painted finishes to wall surfaces

C3010 Wall Finish A/R Tongue & Groove Panels with .05” Thick Laminate

C3020 Floor Finish SF Re-Finish Existing

C3020 Wall Base Finish NA 4” Resilient Base

C3030 Ceiling Finish A/R Impact Resistant GWB

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

Space Name: SAUNA

Function/Adjacencies: Sauna space for men’s or women’s restroom areas for AS4000.

Access:

NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety is to be calculated as part of Business use 1/100 GSF.

Other/Special Req:

Sauna Wood Refurbishment Requirement

1. Pressure wash wood on walls, floors, and ceiling, and benches.

3. After the wood is completely dry, lightly sand all items with fine grit sand paper.

4. Ensure that there is no metal protruding from the wood after sanding. All nails or screws must be countersunk.

5. Do not apply any kind of stain finishes.

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Section Description Qty Size Specific Requirements

C102001 Interior Doors A/R Provide clear glass cedar wood frame sauna door

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 25

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C301003 Wall Finish A/R Refurbish existing Wood per instructions above.

C3020 Floor Finish SF Refurbish existing Wood per instructions above.

C3020 Wall Base SF Refurbish existing Wood per instructions above.

C303001 Ceiling Finish SF Refurbish existing Wood per instructions above.

E201003 Fixed Seating Refurbish existing Wood per instructions above.

Space Name: EXERCISE/ WEIGHT ROOM

Function/Adjacencies: Exercise and weight room for AS4000.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A Audio/Visual System Info: 4 - 42" monitor wall mount

Description Qty Size Specific Requirements

C102001 Interior/Exterior Doors A/R Match Existing

C301003 Wall Finish A/R CMU Paint.

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 26

C301001 Interior Painting SF Painted finishes to CMU wall surfaces

C3020 Floor Finish SF Rubber

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C303005 Suspension Systems Suspended exposed grid compatible with ACT system.

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002

Space Name: LOBBY/CORRIDOR SPACE

Function/Adjacencies: Lobby or Corridor space for AS4000.

Minimum Ceiling Height: 7’-6” minimum above finish floor Acoustics: Wall STC 45 / Door & Frame STC 42

Access: Staff Number of Occupants/Workstations: A/R Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety

FF&E Info: N/A

Description Qty Size Specific Requirements

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 27

C102001 Interior Doors 1 3’-0” x 7’-0”

Interior: Provide solid core wood door in hollow metal frame.

Solid core wood doors with stain finish and steel frames factory-primed, field painted.

Exterior: Provide Store Front aluminum insulated doors and Frames Doors and frames factory finished.

C102007 Interior/exterior Door Hardware A/R

Lever type handle for ADA compliance. Provide rain guards in all exterior doors

C103004 Identifying Devices A/R Provide signage - Coordinate room signage with the user.

C301003 Wall Finish A/R Impact Resistant GWB and CMU

C301001 Interior Painting SF Painted finishes to GWB and CMU wall surfaces

C3020 Floor Finish SF LVT

C3020 Wall Base Finish NA 4” Resilient Base

C303001 Ceiling Finish SF Gypsum Wallboard with veneer plaster (level 5) finish and epoxy paint.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R

General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016. See PART 3

ESR D50.

D503001 Telecommunications A/R compliance with Specification 27 10 00

D503002 Public Address System A/R

D503090 Other Alarms Mass Notification

D509002

Space Name: STORAGE SPACES

Function/Adjacencies: The space is for Storage Spaces for both AS710 and AS4000

Acoustics: Wall STC 45 / Door & Frame STC 42 Access:

Accessed from corridor or as shown in plans.

Number of Occupants/Workstations:

Occupant Load Factor per NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety Other/Special Req:

CFF&E Info: N/A Audio/Visual System Info: N/A Security

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 28

Section Description Qty Size Specific Requirements

C102001 Interior Doors A/R 3’-0” x 7’-0”

Provide solid core wood door in hollow metal frame. Solid core wood doors with stain finish and steel frames factory-primed, field painted.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103004 Identifying Devices A/R Provide signage- Coordinate room signage with the user.

C3010 Wall Finish SF Impact Resistant GWB- Paint

C301001 Interior Painting SF Painted finishes to GWB and CMU wall surfaces

C3020 Floor Finish SF Resilient LVT

C30200 Wall Base Finish LF 4” Resilient Base

C3030 Ceiling Finish SF 24”X24” Suspended Acoustical Ceiling Tiles

C3030 Suspension Systems SF Suspended exposed grid compatible with ACT system

D3040 HVAC Provide ducted supply and return.

D502001 Branch Wiring A/R Branch Circuits & Outlets per ESR

D50202 Lighting Equipment A/R General Lighting: Provide in compliance with UFC 3-530-01.

Provide in compliance with ASHRAE 90.1 2016

D503001 Telecommunications A/R compliance with Specification 27 10 00

Space Name: HEAD & SHOWER AREAS

Renovation to Buildings AS710 & AS4000 Project #19-0119

Part 3 - Page | 29

Function/Adjacencies: The space is for men’s or women’s restroom and shower areas for building AS4000 occupants. Head and shower area for AS4000 will not be demolished or renovated.

NFPA 101 Life Safety Code: Occupant Load per NFPA 101 Life Safety is to be calculated as part of Business use 1/100 GSF.

Other/Special Req: See part 6, architectural concept for building specific requirement.

FF&E Info: N/A Audio/Visual System Info: N/A Security System Info: N/A

Uniformat Section Description Qty Size Specific Requirements

C1010 Partitions SF Existing to Remain

C101001 Fixed Partitions SF Existing to Remain

C102001 Interior Doors A/R

Provide solid core wood door in hollow metal frame. Solid core wood doors with stain finish and steel frames factory-primed, field painted.

C102007 Interior Door Hardware A/R Lever type handle for ADA compliance

C103001 Toilet Partitions A/R…