Amendment_0004_Continuation_Sheet.pdf

CONTINUATION SHEET

ATTACHMENT H - PRICE PROPOSAL FORM

CLIN 0001AF: Delete “28,720” from the No. Units and replace with “28,880”.

PROJECT TABLE OF CONTENTS

DIVISION 10 – SPECIALTIES: Add 10 51 13 METAL LOCKERS to the Project Table of Contents. This

Specification Section accompanies this Amendment.

DIVISION 00 PROCUREMENT AND CONTRACTING REQUIREMENTS

SECTION 00 01 15 LIST OF DRAWINGS

1.2 CONTRACT DRAWINGS

The following drawings are revised as of 4/29/2019:

DRAWING NO. NAVFAC DWG NO. TITLE

1C003 12780771 COMPOSITE SITE PLAN

1C120 12780803 EROSION AND SEDIMENT CONTROL PLAN ‘C’, ‘D’, & ‘E’

1C121 12780804 EROSION AND SEDIMENT CONTROL PLAN ‘F’, ‘G’, ‘H’, & ‘I’

2C003 12781093 COMPOSITE SITE PLAN

3C003 12781425 COMPOSITE SITE PLAN

These revised Drawings accompany this Amendment

DIVISION 01 GENERAL REQUIREMENTS

SECTION 01 33 00a Submittal Register

Delete the Submittal Register in its entirety and replace with the Submittal Register that accompanies this Amendment.

SECTION 01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

1.6.1.1 Site Safety and Health Office (SSHO): Add the following after the second paragraph:

“The SSHO may not have any additional duties. The SSHO may not be the project Superintendent.”

DIVISION 31 EARTHWORK

Section 31 23 00.00 20 EXCAVATION AND FILL

1.2 BASIS FOR BIDS AND PAYMENT: Delete “Section 00 22 13.00 20 SUPPLEMENTARY

INSTRUCTIONS TO OFFERORS” and replace with “Attachment H – Price Proposal Form”.

1.2.1 Unit Price: Delete “Section 00 22 13.00 20 SUPPLEMENTARY INSTRUCTIONS TO OFFERORS” and replace with “Attachment H – Price Proposal Form”.

On NAVFAC Drawing No. 12780977 (1E203):

Delete lighting fixture Type D1 in Electrical Room 213 and replace with lighting fixture Type D2.

On NAVFAC Drawing No. 12780979 (1E302):

At Breakroom 211, delete Keynote #7 (which was changed to Keynote #5 in Amendment 0002) adjacent to the counter duplex receptacles and replace in same location with Keynote #6. These counter receptacles are for microwaves.

On NAVFAC Drawing No. 12780981 (1E304):

At Column Line 7, delete the four (4) motor rated switch symbols.

On NAVFAC Drawing No. 12781234 (2A501):

Detail A3: Delete “4” PLAM BACKSPLASH / SIDESPLASH – WHERE INDICATED” and replace with “4”

SOLID SURFACE BACKSPLASH / SIDESPLASH – WHERE INDICATED”.

Detail A4: Delete “4” PLAM BACKSPLASH / SIDESPLASH – WHERE INDICATED” and replace with “4”

SOLID SURFACE BACKSPLASH / SIDESPLASH – WHERE INDICATED”.

On NAVFAC Drawing No. 12781438 (3C101):

Sheet Keynote 4: Delete “AND DETAIL A3/3C506”.

On NAVFAC Drawing No. 12781439 (3C102):

Sheet Keynote 4: Delete “AND DETAIL A3/3C506”.

On NAVFAC Drawing No. 12781450 (3C506):

Delete Detail A3 SHALLOW FOUNDATION ACTIVE VEHICLE BARRIER (CRASH RATED) in its entirety.