N3319120R4019 PTS Annex 2-Part2of4 (Total 2 of 9).pdf

KOTA -4.00

KOTA + 0.00

Toplovodni kotao na lako loz ulje Viessmann Vitoplex SXA2 200 , 700 kW sanacioni prefabrikovani dimnjaci od nerdjajuceg celika Schiedel PRIMA PLUS , ∅ 35 0mm

POSTOJECI DIMNJAK

ZID OBJEKTA (PRETPOSTAVKA)

Schiedel ICS 25 Ø 350 inox dimnjački sistem. Predviđen je za rad u temperaturnom režimu ≤ 450 °C (≤ 200 °C u pozitivnom pritisku) za gas, ulje i čvrsta goriva. Režim rada pod pritiscima: Negativni pritisak (N1 ≤ 40 Pa), Pozitivni pritisak (P1 ≤ 200 Pa) sa dihtungom-za gas (silikonski) za ulje (Viton).

Dimnjački sistem je dvoplašni izolovan sa sledećim karakteristikama: izrađen od dvostrukog nerđajućeg čelika unutrašnja cev od materijala W.Nr. 1.4404 (316L), spoljašnja cev od materijala W.Nr. 1.4301 (304), izolacija debljine 25mm izrađena od materijala Superwool Plus keramička vuna gustine 96 kg/m3. Unutrašnja cev debljine 0.5mm za prečnike 80mm do 400mm, 0.6mm za prečnike 450mm do 700mm, 1mm za prečnike 750mm do 1200mm. Elementi dimnjačkog sistema su otporni na koroziju i izradjeni su laserskim varenjem u zaštitnoj atmosferi. Sistem je ispitan na koroziju prema GASTEC testu.

Dimnjački sistem mora biti otporan na pojavu kondenzata i kiselina iz dimnih gasova. Utični deo spojeva elemenata dimnjačkog sistema omogućuje kontinualnost izolacije sistema. Prihvatanje dilatacije usled toplotnog opterećenja se obezbeđuje preko dilatacionih spojeva dimnjačkih elemenata. Toplotna otpornost dimnjačkog sistema je 0,37 m2K/W mereno na 200 °C prema EN 1859. ICS dimnjački sistem je kompletan sa svim potrebnim elementima, adapterom za priključak za kotao ,priključcima za reviziju ,kolenima ,teleskopske cevi, priključka za merenje emisije dimnih gasova,osnovnih cevi, , zidnim HD držačima za ankerisanje, spojnicama za spojeve segmenata, adapterom za priključak za sanacioni sistem Prima Plus, vitonskim dihtunzima na svakom spoju. ICS sistem mora biti u potpunosti sa karakteristikama prema standardu SRPS EN 1856-1 i 2. Montažu dimnjačkog sistema izvršiti prema upustvu proizvođača. Proizvođač dimnjačkog sistema mora ispuniti sledeće uslove: potvrdu o kvalitetu upravljačkog sistema "Quality Management systems ISO 9001, minimalnu garanciju min.10 godina na dimnjački sistem i Polisu osiguranja sa limitom min. 500.000 EUR od štetnih događaja odnosno ODGOVORNOST

PROIZVOĐAČA PROISTEKLA IZ UPOTREBE PROIZVODA.

A) DIMNJAČA Br. 1: SCHIEDEL ICS25 Ø 350 mm, RAZVIJENA DUŽINA 11.2 m B) DIMNJAČA Br.2: SCHIEDEL ICS25 Ø 350 mm, RAZVIJENA DUŽINA 10.5 m

C) DIMNACI: SCHIEDEL PRIMA Plus Ø 350 mm, UKUPNA VISINA 2 x 19 m x 2

A)

B)

Формат A1

Dio tehničke dokumentacije:

Objekat: Lokacija:

Prilog: Br. priloga:

Datum revizije i M.P

Saradnik/ci:

Vrsta tehničke dokumentacije:

Br. strane:

Razmjera:

Datum izrade i M.P

Glavni inženjer:

Odgovorni inženjer:

INVESTITOR:PROJEKTANT:

TERMOTEHNIČKE INSTALACIJE

Marijan Vojinović, dipl.inž.maš.

Miroslav Rakić, dipl.inž.maš.

JU OSNOVNA ŠKOLA “BAJO JOJIĆ”

JU MJEŠOVITA SREDNJA ŠKOLA

Ministarstvo prosvjete Crne Gore BATES, Bul. Svetog Petra Cetinjskog br. 62 Podgorica

Opština Andrijevica, Crna Gora

Decembar, 2018.

GLAVNI PROJEKAT

Presjek 1-1

Detalj montaže dimnjačkog sistema

Jose.HernandezFor.SP Underline

Jose.HernandezFor.SP Text Box Schiedel ICS 25 Ø 350 stainless steel chimney system. It is designed to operate in temperature mode ≤ 450 ° C (≤ 200 ° C) at positive pressure) for gas, oil and solid fuels. Pressure mode: Negative pressure (N1 ≤ 40 Pa), Positive pressure (P1 ≤ 200 Pa) with gas seal (silicone) for oil (Viton).

The chimney system is double-layer insulated with the following characteristics: made of double stainless steel inner tube of material W.Nr. 1.4404 (316L), outer tube of material W.Nr. 1.4301 (304), thickness insulation 25mm made of Superwool Plus 96 kg / m3 ceramic wool. 0.5mm inner tube for diameters 80mm to 400mm, 0.6mm for diameters 450mm to 700mm, 1mm for diameters 750mm to 1200mm. Elements the chimney systems are corrosion resistant and are laser welded in a protective atmosphere. The system is tested for corrosion according to the GASTEC test.

The chimney system must be resistant to condensation and acid from the flue gas. Plug-in connection elements of the chimney system allow for continuous insulation of the system. Acceptance of dilation due to thermal loads are provided through the expansion joints of the chimney elements. Chimney thermal resistance system is 0.37 m2K / W measured at 200 ° C according to EN 1859. ICS chimney system is complete with all necessary elements, boiler connection adapter, revision fittings, elbows, telescopic tubes, fittings Measurement of emission of flue gases, base pipes, HD wall anchors, fittings segments, with an adapter adapter for the Prima Plus remediation system, with viton gaskets at each joint. ICS the system must be fully compliant with the specifications of SRPS EN 1856-1 and 2. Chimney installation perform the system as instructed by the manufacturer. The chimney system manufacturer must meet the following requirements: certification on the quality of the management system "Quality Management systems ISO 9001, minimum warranty of 10 years at chimney system and min. EUR 500,000 from adverse events or LIABILITY

MANUFACTURERS RESULT FROM USE OF PRODUCTS.

A) CHIMNEY NO. 1: SCHIEDEL ICS25 Ø 350 mm, length 11.2 m B) CHIMNEY NO.2: SCHIEDEL ICS25 Ø 350 mm, DEVELOPED LENGTH 10.5 m C) CHIMNEYS: SCHIEDEL PRIMA Plus Ø 350 mm, TOTAL HEIGHT 2 x 19 m x 2

ŠEMA USPONSKIH VODOVA-ŠTRANG ŠEMA

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-21-600/160

2940 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

N O

K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

3220 W

N O

N O

K-23-600/160 K-23-600/160

3220 W

864 W

N O

Orion-4-600/95

1025 W

N O

Orion-5-600/95

N O

K-15-600/160

2100 W

3220 W

N O

N O

K-23-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

N O

N O

3220 W

N O

N O

K-23-600/160 K-23-600/160

3220 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

560 W

N O

K-4-600/160

2380 W

N O

N O

K-17-600/160 K-18-600/160

2520 W

N O

K-20-600/160

2800 W

3080 W

N O

N O

K-22-600/160 K-20-600/160

2800 W

2940 W

N O

N O

K-21-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-21-600/160

2940 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

2940 W

N O

N O

K-21-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

3080 W

N O

N O

K-21-600/160 K-20-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

648 W

N O

T2-3-600/95

1296 W

N O

T2-6-600/95

N O

K-20-600/160

2800 W

3220 W

N O

N O

K-23-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-20-600/160

2800 W

2660 W

N O

N O

K-19-600/160 K-20-600/160

2800 W

2940 W

N O

N O

K-21-600/160 K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160 K-21-600/160

2940 W

171819202122232425262728293072737474.1757980811516

W ∅2

1.3 x2

.0 mm

W

∅2 6.9 x2 .65 m m

W

∅3 3.7 x3 .25 m m

3220 W

K-23-600/160 K-23-600/160

3220 W

W

∅3 3.7 x3 .25 m m

W ∅2

1.3 x2

.0 mm

W

∅2 6.9 x2 .65 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2,4 x3 ,25 m m

W

∅4 2,4 x3 ,25 m m

W

∅4 2,4 x3 ,25 m m

W

∅4 2,4 x3 ,25 m m

W

∅4 2,4 x3 ,25 m m

W

∅4 8,3 x3 ,25 m m

W

∅4 8,3 x3 ,25 m m

W

∅4 8,3 x3 ,25 m m

W

∅4 8,3 x3 ,25 m m

W

∅4 8,3 x3 ,25 m m

W

∅6 0,3 x3 ,65 m m

W

∅6 0,3 x3 ,65 m m

W

∅6 0,3 x3 ,65 m m

W ∅6

0,3 x3

,65 m m

W

∅6 0,3 x3 ,65 m m

W

∅6 0,3 x3 ,65 m m

171819202122232425262728293072737474.1757980811516

1260 W

N O

K-9-600/160

2100 W

N O

K-15-600/160

1960 W

N O

K-14-600/160

2100 W

N O

N O

K-15-600/160 K-15-600/160

2100 W

3360 W

N O

N O

K-24-600/160 K-24-600/160

3360 W

2660 W

N O

N O

K-19-600/160 K-19-600/160

2660 W

2800 W

N O

N O

K-20-600/160 K-19-600/160

2660 W

2660 W

N O

N O

K-19-600/160 K-19-600/160

2660 W

3080 W

N O

N O

K-22-600/160 K-21-600/160

2940 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160 K-21-600/160

2940 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

N O

N O

121 121

3220 W

N O

N O

K-22-600/160 K-23-600/160

3220 W

2240 W

N O

N O

K-16-600/160 K-16-600/160

2240 W

N O

K-15-600/160

2100 W

2940 W

N O

N O

K-21-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

828384870102 03040506080911 12131516

W ∅2

1.3 x2

.0 mm ka podstanici drugi sprat prvi sprat

105980 W ∅ 60,3x3,65 mm

82 16 prvi sprat

N O

K-6-600/160

840 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

K-22-600/160 K-22-600/160

3080 W 3080 W

2800 W

N O

K-20-600/160

N O

N O

N O

N O

2240 W

K-16-600/160 K-16-600/160

2240 W 2240 W

K-16-600/160 K-16-600/160

2240 W prizemlje prizemlje prizemlje

Формат A1x4

2800 W

N O

N O

K-20-600/160 K-21-600/160

2940 W

2940 W

N O

N O

K-21-600/160 K-20-600/160

2800 W

2520 W

N O

K-18-600/160

3700 W

N O

Orion-20-600/95

3330 W

N O

Orion-18-600/95

3330 W

N O

Orion-18-600/95

864 W

N O

Orion-18-600/95

648 W

N O

Orion-3-600/95

4255 W

N O

Orion-23-600/95

4255 W

N O

Orion-23-600/95

4625 W

N O

Orion-25-600/95

3220 W

N O

N O

K-23-600/160 K-23-600/160

3220 W

3220 W

N O

N O

K-23-600/160 K-23-600/160

3220 W

N O

K-25-600/160

3500 W

65 66

1080 W

N O

Orion-5-600/95

3920 W

N O

N O

K-28-600/160 K-27-600/160

3280 W

3360 W

N O

N O

K-24-600/160 K-24-600/160

3360 W

68 75

N O

K-26-600/160

3640 W

N O

K-6-600/160

840 W

2380 W

N O

N O

K-17-600/160 K-17-600/160

2380 W

2380 W

N O

N O

K-17-600/160 K-17-600/160

2380 W

N O

K-15-600/160

2100 W N O

K-15-600/160

2100 W

2100 W

N O

N O

K-15-600/160 K-15-600/160

2100 W

2100 W

N O

K-15-600/160

2100 W

N O

K-15-600/160

73 72

2100 W

N O

N O

K-15-600/160 K-15-600/160

2100 W

2100 W

N O

N O

K-15-600/160 K-15-600/160

2100 W prizemlje - sala za fizičko vaspitanje

3220 W

N O

N O

K-23-600/160 K-22-600/160

3080 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

3360 W

N O

N O

K-24-600/160 K-23-600/160

3220 W

3360 W

N O

N O

K-24-600/160 K-24-600/160

3360 W

N O

K-25-600/160

3500 W

864 W

N O

Orion-4-600/95

3885 W

N O

Orion-21-600/95

1944 W

N O

Orion-9-600/95

864 W

N O

Orion-4-600/95

2800 W

N O

N O

K-20-600/160 K-22-600/160

3080 W

2800 W

N O

N O

K-20-600/160 K-21-600/160

2940 W

3080 W

N O

N O

K-22-600/160 K-22-600/160

3080 W

N O

K-18-600/160

2520 W

2940 W

N O

N O

K-21-600/160 K-21-600/160

2940 W

169024 W ∅76.1x2.9 mm

1820 W

N O

N O

K-13-600/160 K-11-600/160

1540 W

1540 W

N O

K-18-600/160

2240 W

N O

N O

K-16-600/160 K-16-600/160

2240 W

2240 W

N O

N O

K-16-600/160 K-16-600/160

2240 W

2240 W

N O

K-16-600/160

N O

K-24-600/160

3360 W

N O

K-24-600/160

3360 W

N O

K-22-600/160

3080 W

N O

K-23-600/160

3220 W

1540 W

N O

N O

K-11-600/160 K-11-600/160

1540 W

1540 W

N O

N O

K-11-600/160 K-12-600/160

1680 W

2380 W

N O

K-17-600/160

2520 W

N O

K-18-600/160

2520 W

N O

N O

K-18-600/160 K-18-600/160

2520 W

2520 W

N O

N O

K-18-600/160 K-18-600/160

2520 W

2520 W

N O

N O

K-18-600/160 K-18-600/160

2520 W

N O

K-25-600/160

3500 W

N O

K-24-600/160

3360 W

N O

K-24-600/160

3360 W

N O

K-13-600/160

1820 W

N O

K-13-600/160

1820 W

N O

K-3-600/160

420 W

N O

K-4-600/160

864 W

N O

K-3-600/160

648 W

2100 W

N O

N O

K-15-600/160 K-14-600/160

1960 W

75292 W ∅48.3x3.25 mm

3080 W

N O

K-22-600/160

UniKal 140-2W

3080 W

N O

K-22-600/160

45 46

UniKal 140-2W

3080 W

N O

K-22-600/160

3080 W

N O

K-22-600/160

48 49

UniKal 140-2W

3080 W

N O

K-22-600/160

3080 W

N O

K-22-600/160

93376 W ∅ 60.3x3.65 mm

UniKal 140-2W

3080 W

N O

K-22-600/160

3080 W

N O

K-22-600/160

UniKal 140-2W

3080 W

N O

K-22-600/160

3080 W

N O

K-22-600/160

37 38 40 4136

UniKal 140-2W

3080 W

N O

K-22-600/160

9916 W ∅26.9x2.3 mm

W

∅2 6.9 x2 .3 mm

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W ∅4

2.4 x3

.25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅2 6.9 x2 .3 mm

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W ∅4

2.4 x3

.25 m m

W

∅4 2.4 x3 .25 m m 9916 W

∅26.9x2.3 mm 9916 W

∅26.9x2.3 mm9916 W ∅26.9x2.3 mm

9916 W ∅26.9x2.3 mm

9916 W ∅26.9x2.3 mm

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

W

∅2 6.9 x2 .65 m m

W ∅3

3.7 x3

.25 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m22260 W

∅33.7x3.25 mm

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

W ∅2

6.9 x2

.65 m m

W

∅2 6.9 x2 .65 m m

W ∅2

1.3 x2

.0 mm

W ∅2

6.9 x2

.65 m m

W ∅2

6.9 x2

.65 m m

W

∅2 6.9 x2 .65 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

2940 W

N O

N O

K-21-600/160K-21-600/160

2940 W

2940 W

N O

N O

K-21-600/160K-21-600/160

2940 W

2660 W

N O

N O

K-19-600/160K-20-600/160

2800 W

2800 W

N O

N O

K-20-600/160K-20-600/160

2800 W

2940 W

N O

N O

K-21-600/160K-22-600/160

3080 W

3080 W

N O

N O

K-22-600/160K-22-600/160

3080 W

W ∅2

1.3 x2

.0 mm

W ∅2

6.9 x2

.65 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W ∅4

2.4 x3

.25 m m

W

∅4 2.4 x3 .25 m m

W ∅2

1.3 x2

.0 mm

W ∅2

6.9 x3

.25 m m

W ∅2

6.9 x3

.25 m m

W

∅2 6.9 x3 .25 m m

W

∅3 3, 7x

3, m m

W ∅ 3

3, 7x

3, m m

W ∅4

2.4 x3

.25 m m

W ∅4

2.4 x3

.25 m m

W ∅2

6.9 x2

.65 m m

W ∅2

6.9 x2

.65 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

W ∅2

6.9 x2

.65 m m

W

∅2 6.9 x2 .65 m m

W

∅2 6.9 x2 .65 m m

W

∅3 3.7 x3 .25 m m

W

∅3 3.7 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W ∅2

1.3 x2

.0 mm

W

∅2 6.9 x2 .65 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 2.4 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m

W

∅4 8.3 x3 .25 m m 84

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

9520 W ∅26.9x2.65 mm

W

∅4 8.3 x3 .25 m m

10360 W ∅26.9x2.65 mm

W ∅6

0.3 x3

.65 m m

W

∅6 0.3 x3 .65 m m

W

∅6 0.3 x3 .65 m m

W

∅6 0.3 x3 .65 m m

97627 W ∅60.3x3.65 mm

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

106027 W ∅60.3x3.65 mm

129849 W ∅60,3x3,65 mm

W ∅2

1.3 x2

.0 mm

W

∅2 6.9 x2 .65 m m

W

∅ 3 3, 7x

3, m m

W

∅ 3 3, 7x

3, m m

W

∅7 6, 1x 2, m m

W

∅7 6, 1x 2, m m

W ∅6

0,3 x3

,65 m m

W

∅6 0,3 x3 ,65 m m

W

∅6 0,3 x3 ,65 m m

W ∅7

6, 1x 2, m m

W

∅7 6, 1x 2, m m

W

∅7 6, 1x 2, m m

W

∅ 6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅4 2,4 x3 ,25 m m

W

∅6 0, 3x

3, m m

W ∅6

0, 3x

3, m m

W

∅ 6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W ∅6

0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅ 6 0, 3x

3, m m

W

∅6 0, 3x

3, m m

W

∅ 4 8, 3x

3, m m

W

∅4 8, 3x

3, m m

W

∅4 8, 3x

3, m m

W

∅4 8, 3x

3, m m

W

∅ 4 8, 3x

3, m m

W

∅4 8, 3x

3, m m

W

∅4 2, 4x

3, m m

W

∅ 4 2, 4x

3, m m

W

∅4 2, 4x

3, m m

W ∅4

2, 4x

3, m m

W ∅2

1.3 x2

.0 mm

W ∅2

1.3 x2

.0 mm

6720 W ∅21.3x2.0 mm 8680 W

∅26.9x2.65 mm

W

∅2 6.9 x2 .65 m m

W

∅ 3 3, 7x

3, m m

W ∅2

1, 3x

2, m m

W

∅2 6.9 x2 .65 m m

16100 W ∅ 33,7x3,25 mm

CRNE CIJEVI:

DN 15 /∅21,3x2,65 mm/ DN 20 /∅26,9x2,65 mm/ DN 25 /∅33,7x3,25 mm/ DN 32 /∅42,4x3,25 mm/ DN 40 /∅48,3x3,25 mm/ DN 50 /∅60,3x3,65 mm/ DN 65 /∅76,1x2,90 mm/ DN 80 /∅88,9x3,20 mm/ DN 100 /∅108,0x3,60 mm/ DN 125 /∅133,0x4,00 mm/

RAZVOD/POVRAT TOPLE/HLADNE VODE 90/70°C

DN80

L=110 mm

DN80

L=110 mm

Dio tehničke dokumentacije:

Objekat: Lokacija:

Prilog: Br. priloga:

Datum revizije i M.P

Saradnik/ci:

Vrsta tehničke dokumentacije:

Br. strane:

Razmjera:

Datum izrade i M.P

Glavni inženjer:

Odgovorni inženjer:

INVESTITOR:PROJEKTANT:

TERMOTEHNIČKE INSTALACIJE

Marijan Vojinović, dipl.inž.maš.

Miroslav Rakić, dipl.inž.maš.

JU OSNOVNA ŠKOLA “BAJO JOJIĆ”

JU MJEŠOVITA SREDNJA ŠKOLA

Ministarstvo prosvjete Crne Gore BATES, Bul. Svetog Petra Cetinjskog br. 62 Podgorica

Opština Andrijevica, Crna Gora

Decembar, 2018.

GLAVNI PROJEKAT

20°C

001.1 001.2 15°C15°C

20°C

15°C

15°C

20°C

15°C

18°C

Rekuperator toplote 2, VAM 2000 FC

Rekuperator toplote 1, VAM 2000 FC

RFD 315

AZR-4 500x500

AZR-4 500x500

AZR-4 500x500

AZR-4 500x500

∅400

∅400

∅400

∅400

∅400

∅400

∅315

∅315

∅400

∅315

∅400 ∅400

∅315

∅250

∅250 ∅250

∅250

∅250

∅250

∅250

∅250

∅400

∅400

∅400

∅400

∅400 1

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

VDL 315

RFD 315

RFD 315

RFD 315

RFD 315

RFD 315

RFD 315

RFD 315

RFD 315

RFD 315

N

N E

E

S E

S

S W

W

N W

Формат A2

LEGENDA:

Kanali za obrađeni vazduh Kanali za izvlačenje vazduha

Kanali za otpadni vazduh

Kanali za svjež vazduh

Rekuperator toplote, tip: VAM 2000, Protok vazduha: 2000 m³/h, Struja: 16 A, Napajanje: 1ph/220-230/50Hz

Dimenzije: 726x1510x1160mm

Težina: m=145 kg

Fleksibilno crijevo za vazduh

NAPOMENA: Uređaje i opremu montirati, ojačanim čeličnim vezama, kako bi se maksimalno osigurala njihova statika, i spriječile povrede usled oštećenja opreme. Predlog je da se ispod opreme i uređaja za ventilaciju postavi zaštitna mreža, kako bi se spriječilo njihovo oštećenje, usled aktivnosti u prostoru!!!

Vrtložni difuzor VDL 315, sa zaštitnom mrežom

Vrtložni difuzor RFD 315

Predvidjeti električni priključak 230 V AC, 3-point

Dio tehničke dokumentacije:

Objekat: Lokacija:

Prilog: Br. priloga:

Datum revizije i M.P

Saradnik/ci:

Vrsta tehničke dokumentacije:

Br. strane:

Razmjera:

Datum izrade i M.P

Glavni inženjer:

Odgovorni inženjer:

INVESTITOR:PROJEKTANT:

TERMOTEHNIČKE INSTALACIJE

Marijan Vojinović, dipl.inž.maš.

Miroslav Rakić, dipl.inž.maš.

JU OSNOVNA ŠKOLA “BAJO JOJIĆ”

JU MJEŠOVITA SREDNJA ŠKOLA

Ministarstvo prosvjete Crne Gore BATES, Bul. Svetog Petra Cetinjskog br. 62 Podgorica

1:50

Opština Andrijevica, Crna Gora

Decembar, 2018.

GLAVNI PROJEKAT

OSNOVA PRIZEMLJA

Raspored opreme za ventilaciju sale

Формат A1

Dio tehničke dokumentacije:

Objekat: Lokacija:

Prilog: Br. priloga:

Datum revizije i M.P

Saradnik/ci:

Vrsta tehničke dokumentacije:

Br. strane:

Razmjera:

Datum izrade i M.P

Glavni inženjer:

Odgovorni inženjer:

INVESTITOR:PROJEKTANT:

TERMOTEHNIČKE INSTALACIJE

Marijan Vojinović, dipl.inž.maš.

Miroslav Rakić, dipl.inž.maš.

JU OSNOVNA ŠKOLA “BAJO JOJIĆ”

JU MJEŠOVITA SREDNJA ŠKOLA

Ministarstvo prosvjete Crne Gore BATES, Bul. Svetog Petra Cetinjskog br. 62 Podgorica

Opština Andrijevica, Crna Gora

Decembar, 2018.

GLAVNI PROJEKAT

OSNOVA PRIZEMLJA

Prostorni prikaz opreme za ventilaciju sale

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

INVESTOR/OBJECT

ELEMENTARY SCHOOL „BAJO JOJIĆ“

LOCATION

ANDRIJEVICA

TYPE OF TECHICAL

DOCUMENTATION

PROJECT OF ADAPTATION

December 2019

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

CONTENT

OF THE PROJECT

A1. TERMS OF REFERENCE

A2. TEXTUAL AND NUMERICAL DOCUMENTATION

o Technical description o General and Technical conditions of works execution o Bill of Quantities

A3. GRAPHIC DOCUMENTATION – SCHEMES

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

A1 . TERMS OF REFERENCE

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

TERM OF REFERENCE

for preparation of project of adaptation

INTRODUCTION:

This task defines the framework for the project of adaptation of the elementary school "Bajo Jojić

LOCATION

Elementary School „Bajo Jojić” is located in Andrijevica.

AIM AND PROJECT PROGRAM

As part of the modernization and sustainable development program, the school management has defined the programmatic task of adaptation, which included the application of a part of energy efficiency measures - replacement of exterior joinery

The aim of this project is to continuously work on the modernization and creation of better conditions for the stay of children and the teaching process.

Investor:

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

A2.TEXTUAL AND NUMERICAL DOCUMENTATION

o Technical description o General and Technical conditions of works execution o Bill of Quantities

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

A3 .1.TECHNICAL DESCRIPTION

1.TECNICAL DESCRIPTION

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

MAIN DESIGN OF ADAPTATION

INTRODUCTORY NOTES:

Project documentation was done on the basis of the terms of reference, the adopted plan of measures for the adaptation and improvement of the conditions for the residence and work of children and employees, as well as the ambient conditions and applicable building codes, standards and regulations.

EXISTING CONDITION:

The replacement of external joinery, with the reconstruction of the central heating system (the subject of another project). Existing aluminium exterior joinery is in poor condition and significantly affects the low energy performance of the building..

PLANNED STATUS:

The renovation works are aimed at solving the basic construction problems in the functioning of the building. The works retain the existing concept and functional organization with minor changes to make better use of space.

The adaptation project covers the following groups of works:

• Exterior joinery replacement and

POSITION DESCRIPTION:

Exterior (facade) joinery REPLACE:

Existing facade joinery, on the new - functional part of the school building, is completely removed and replaced with new joinery made of PVC profiles (windows) and AL profiles (entrance lot -partitions with doors).

Windows in general

Facade windows must be carried out according to the schemes of existing ones, all of PVC profiles (white profiles RAL 9010) with double glass package, with total heat transfer coefficient Uw≤ 1.5W / m²K according to EN ISO 10077

The manufacturer must prove that he has ISO 9001.

The final product which is going to be delivered to the construction site, must be certified in accordance with EN 12207, EN12208, EN12210, and made in the system as follows:

Profiles The window system should be made of multi-chamber (at least five-chamber) PVC profiles

(white profiles RAL 9010), minimum profile width 70mm, in accordance with the RAL quality standard (which means resistance to UV radiation, twist, etc.).

The maximum value of the thermal conductivity of the profile should be Uf≤1.3W / m²K

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

The profile reinforcement should be in accordance with the specification of the profile supplier (from galvanized steel profiles of appropriate thickness as stiffening and reinforcement, and reinforcement of all angles and connections for permanent preservation of the specified window geometry, all in accordance with the system recommendations of the profile system supplier).

Glass The glass package is made of double glass with hermetically sealed argon in the gap, with a total thickness of 24 (4 + 16 + 4) mm. The outer glass is coated to reduce heat gain from sunlight (the second surface seen from the outside) and the inner glass is flat (float glass). The glass package has the following minimum characteristics:

- Structure 4mm glass + coating to reduce heat gain from sunlight + 16mm intermediate (90% argon filled) + 4mm flat (float) glass -Solar factor (g) of heat gain according to EN 410: <45%;

- Visible Light Transmission (VT): ≥65%;

- Natural Light Similarity Index (Color Rendering Index):> 90%;

- Heat transfer coefficient (Ug value) according to EN 673: Ug≤ 1.1 W / m²K;

Sealing Provide a minimum of two sealing rubber strips on the extent per frames and wings. The minimum performances that the finished product must provide and which must be proven through official certificate are: EN 12207 - CLASS 4; EN 12208 - CLASS 8A; EN 12210 - CLASS C4;

Shackles Supply joinery with high quality nickel and AL alloy shackles, handles or locks and keys. It is compulsory for all window openings to have the shackle with the brake against mis-handling and sudden gust of wind.

Enable openings according to the scheme with quality certified/attested shackles. For windows higher than 2m, it is foreseen to open the “ventus” wing with a lever. Special care should be taken to ensure that the “ventus” window shackle are of high quality and durable with the appropriate number of “scissors” relative to the wing size.

Special attention should be paid to the high-mounted vent wings (upper horizontal wings over 1.9m in height) which must be fitted with high-quality shackles and provide a quality opening system in the lower opening zone. Command of these openings should be with a lever or similar, lowered at level of max. 1.50m from the floor.

Ventilation Provide natural air flow when the window is closed, through specially inserted elements in the window frame, in accordance with DIN and EU standards. The number and size of elements depends on the size of the window - give min. 2 pieces per each window. The ventilation opening must guarantee safety against high winds, in accordance with all applicable and EU standards - 9A/E750 (EN 12208). This mechanism should be either self-regulating or to provide manual opening/closing. Do not insert elements into fixed windows and skylights.

Regardless of the choice of option, the system should provide natural ventilation without compromising safety, not to allow external noise beyond the permissible limit, as well as not to allow moisture or water. At the same time it should allow moisture to be removed from the room

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

in order to reduce or eliminate moisture. This mechanism should allow for minimal ventilation of the room in order to prevent moisture condensation in the room, but at the same time make it possible to not lose big energy.

Drainage The openings and channels in the condensate drainage profiles must be fitted with covers on the outside of the drainage opening. The cover also has to be in the complete profile system and made of the same material as the profiles and at the same time protected from falling due to atmospheric influences.

If, after removal of the existing facade joinery, it is noticed that there are built-in blind frames, they should be retained and a new joinery should be installed over them. If they are not found on the spot, the new joinery should be installed without a blind frame and seal the joint between the wall and the window frame with foam or the like.

Provide permanent and firm fixing of windows and window partitions to exterior walls by steel anchors. After installation, seal the space between the frame and the wall with a suitable sealant (pur-foam or the like). Fix the windows to the walls with anchors of 50mm deep.

Installation, jambs, solbanks and window sills After installation of the windows and sealing the treatment of the "jambs" is necessary from the inside with glue and mesh, plaster or rigips boards with the necessary substructure, and with the possibility of plastering the certain places, if any major damage, depending on the situation, would occur during the removal of the existing joinery, so to cover the sealing materials and any new useless denivelation between the window and the structure of the building and thus bring the surface of the side to its proper state. So sealed surfaces, shall be smoothed and painted.

The processing of the interior jambs is not separately calculated, but this position is included in the unit price of the installed window. Processing of interior jambs is included in the unit price of the installed joinery.

Carpentry should be installed in accordance with RAL installation using vapor-permeable watertight straps. The straps can be universal (both for indoor and outdoor use) or for outdoor or indoor use only. This RAL mounting option also requires the use of pur foam. The wall and joinery joint must be filled with weather-resistant silicone and UV radiation with a minimum warranty period of 5 years. After installation, repair the damage to the grout with cement mortar and install the external decorative aluminum molding 4 * 4cm.

NOTE: All four slats in the facade opening are handled in the same way, except that there is no molding on the bottom - parapet, since the solbank is mounted. The price includes installation and dismantling of the required scaffolding, as well as all supporting work and material.

WATERPROOFING MUST BE PROVIDED at the window and jamb contact on the outside using the method described above with the addition of RAL mounting (foils, expansion strips, seals, ..) at positions where the supervisory body decides that it is necessary.

The windows should be positioned so that the outside is in the same plane in which there were previous windows. On the outside, on the lower horizontal, install a flashing of factory painted aluminum metal sheet, the so-called „sill“. They are installed over the entire width of windows and skylights with prescribed culvert (window trim) over the existing facade. The window trim must be anchored with at least two anchors in the field. Provide outer window trim with elaborated details for fixing to frames. External Al. window trim should be so fastened in order to prevent water penetration between the bottom of the window and the wall. IT IS

MANDATORY FOR EXTERNAL SILL TO BE TUCKED INTO THE FACADE CLADDING AND TO

PROJECT OF ADAPTATION ELEMENTARY SCHOOL “BAJO JOJIĆ“ ANDRIJEVICA

WATERPROOF THE JOINT. Prior manufacturing, check all measures of openings and “sills” on site, and record in the construction log.

The Contractor shall provide a warranty of 10 (ten) years (if the Maintenance Contract is planned) or 5 (five) years (without the Contract), for the complete window.

Vrata

The old front door will be replaced with a new one made of Al plastic coated profiles with thermal break, double glazed glass, one glass of which should be coated with low emissivity 4 + 16 + 4, filled with argon or other inert gas and with a factor of solar energy permeability (solar factor g) g≤65%. The color of the aluminum profiles is white.

Exterior doors are equipped with emergency door handles (anti-panic system), very tight handles on both sides of the door at an angle of about 45 ° to not interfere with the operation of the door handle, length not exceeding 60 cm, hydraulic door closers on the main wing of the manufacturer "ASSA ABLOY DC 340 "with telescopic sliding mechanism or better, with floor brackets for public buildings on both wings manufacturer" DORMA "or better and cylinder with three key lock.

Supply the wing with a total of four hinges (three in the upper and one in the lower neck belt).

The windshield will be replaced by a new one, fitted with very sturdy handrails on either side of the door at an angle of about 45 °, not more than 60cm in length, with a high quality rubber floor stop. Supply the wing with the required number of hinges for the normal functioning of the door.

Doors should be operated without sill trim, and the wings on the underside will be supplied with high quality brushes.

The opening method and accessories required for individual doors are described in the joinery schemes.

The unit price of the door should also include the finishing of the shutters (for the profiles to be "sunk" in the plaster or to be treated with aluminum strips).

For openings of windows and doors of at least one dimension exceeding 3 m, the Contractor shall be obliged to strengthen the position statically.

For door installation, a good quality mechanism should ensure that everything is opened according to the carpentry schemes, as well as the installation of a self-closing mechanism, a three-key lock cylinder and a floor stop gauge.

The certificates to be submitted by the contractor for all locksmithing are:

• window system testing, according to 14351-1 and B 5300,

• Air permeability certificate. EN 12207 - Class 4,

• Water resistance certificate EN 12208 - Class E 900 A,

• Wind resistance EN 12210 - Class C5,

• Mechanical requirements EN 12400 - Class 2,

• Certification for sound protection up to protection class 5,

• Certificate of heat transfer coefficient DIN EN 12412-2,

• Glass certificate EN 673,

• Certificate for shackles V ENV 1627-1630, resistance class 3.

In the process of evaluation of tenders, it is the responsibility of the tenderer to submit characteristic drawings of the corners of standard windows and doors, as well as other catalog and presentation material. After designing workshop documentation for specific objects, ensure the approval of the