N0017821R4401 QA-5th Round.pdf
PDF 54 KB Posted
- Solicitation number
- N00178-21-R-4401
About this file
This document contains questions and answers regarding labeling requirements for cables procured under solicitation N00178-21-R-4401 for RF & Circuit Design Assembly & Fabrication Support from the Department of the Navy Naval Sea Systems Command. Specifically, the question asks if laser marking could be replaced with labeling cables every six inches for parts 21916101001 through 21916101006, to which the answer provides that cable labeling should minimally be at each connector and the middle of the cable, and if the cable is over one meter then labeling should occur every meter.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Question: In lieu of the requirement for laser marking on Parts 21916101‐001, 21916101‐002, 21916101‐003, 21916101‐004, 21916101‐005, and 21916101‐006, would it be acceptable to label the cable every 6 inches?
Answer: Yes. Labeling should be, at a minimum, at each connector and at the middle of the cable. If cable is longer than 1 meter, cable should be labeled at every meter.
File details come from the government source that posted it. Updated .