Att_2_FPM_Specification_Response_Matrix.xlsx
XLSX spreadsheet 20 KB Posted
- Attached to
- U. S. Navy Force Protection Medium (FPM) Boats
- Solicitation number
- N00024-19-R-2222
About this file
This document contains an attachment to a response matrix for a Navy Force Protection Medium Boat specification. The Navy intends to issue a request for proposal for approximately 113 Force Protection Medium Boats over the next five years through an indefinite delivery/indefinite quantity contract vehicle. The boats will provide security patrol, escort, and force protection services for Navy ships and personnel from waterborne threats both inside and outside of ports worldwide. Offerors must submit the attachment with their response, filling in technical details for their proposed boat design and noting any exceptions to the specification requirements. The matrix includes requirements for dimensions, capacities, performance specifications, systems, and equipment to be provided. It also provides instructions and notes for offerors to adequately respond to all aspects of the specification.
Attachment 2- FPM Specification Response Matrix
View the file
Other files
Show all 30
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
| ATTACHMENT 2 |
| CNIC FORCE PROTECTION MEDIUM BOAT |
| SPECIFICATION RESPONSE MATRIX |
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Length Overall including collar and appendages: {{xx.xx}} feet (ft) |
| 070-1 | Hull Length (welded structure only): {{xx.xx}} ft |
[Shall be nominally 32-33 ft per Section 042-1] 070-1 Beam Overall (BOA): {{xx.x}} ft [Shall not exceed 10 ft per Sections 042-1 and 084-1]
| 070-1 | Chine Beam: {{xx.x}} ft |
| 070-1 | Height, Keel to Fixed Structure: {{xx.x}} ft |
| 070-1 | Height, Keel to Moveable Structure: {{xx.x}} ft |
| 070-1 | Height on trailer when rigged for transport: {{xx.x}} ft |
[Shall not exceed 162 inches per Section 084-1] 070-1 Width on trailer when rigged for transport: {{xx.x}} ft [Shall not exceed 120 inches per Section 084-1]
| 070-1 | Combined boat/trailer length when rigged for transport: {{xx.x}} ft |
| 070-1 | Deadrise at midships: {{xx}} degrees |
| 070-1 | Deadrise at transom: {{xx}} degrees |
| 070-1 | Total Installed Fuel Capacity: {{xxxx}} gallons |
[Shall be minimum of 175 gallons per Section 541-1]
| 070-1 | Full Load: {{xx,xxx}} lbs incl {{x}}% construction/build margin |
| 070-1 | Longitudinal Center of Gravity (LCG): {{xx.x}} ft forward of transom/keel intersect. |
| 070-1 | Static Draft (hull): {{x.x}} ft |
| 070-1 | Static Draft (outboards): {{x.x}} ft |
[Shall not exceed 4 ft, per Section 042-1] 070-1 Cruise Speed: {{xx}} knots (kts) at Full Load in calm water [Shall be 20-25 knots per Section 042-1] 070-1 Sprint Speed: {{xx}} kts at Full Load in calm water [Shall be at least 30 knots per Section 042-1] [OBJECTIVE: Shall be at least 30 knots, not to exceed 35 knots per Section 042-1]
| 070-1CSF | Full Load: {{xx,xxx}} lbs incl {{x}}% construction/build margin |
| 070-1CSF | Longitudinal Center of Gravity (LCG): {{xx.x}} ft forward of transom/keel intersect. |
| 070-1CSF | Static Draft (hull): {{x.x}} ft |
| 070-1CSF | Static Draft (outboards): {{x.x}} ft |
[Shall not exceed 4 ft, per Section 042-1] 070-1CSF Sprint Speed: {{xx}} kts at Full Load in calm water [Shall be at least 30 knots per Section 042-1] 070-2 Enter list of submitted drawings describing the proposed boat. FP Medium
Training Variant
| 084-2 | Specific make/model of trailer |
| 100-1 | General Structural Requirements - Provide description of structural methodology, i.e. propose industry standard or first principle analyses. |
| 100 | General Requirements for Hull Structure - Provide description of welding qualification program. |
| 236-1 | Outboard Engines (Twin) - Identify specific make/model for each engine OEM. |
| 313-1 | Batteries (Outboard 12 Vdc) - Identify quantity and specific make/model of batteries in each battery bank. |
[All batteries shall be same model per Specification Section 313-1]
| 313-4 | Shore Power Battery Charger(s) - Provide specific make/model and quantity |
| 422-5 | Spotlight, Fixed Mount - Provide specific make/model of spotlights. |
| 512-2 | Manned Compartment Fresh Air Ventilation - Provide make/model of ventilation fan. |
| 513-1 | Generator Compartment Ventilation - Describe generator compartment ventilation system configuration. Provide specific make/model and quantity of ventilation fans. |
| 529-2 | Electric Bilge Pumps - Provide specific bilge pump quantity and locations. |
| 565-1 | Trim Tabs - Provide specific make/model of trim tabs. |
| All | CNIC FP Medium Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3. |
| Offeror's Notes: |
&12N00024-19-R-22XX &10
&P of &N
Example Response
| ATTACHMENT 2 |
| CNIC FORCE PROTECTION MEDIUM BOAT |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Length Overall including collar and appendages: {{xx.xx}} feet (ft) | 37 ft | |
| 070-1 | Hull Length (welded structure only): {{xx.xx}} ft | ||
| [Shall be 30-33 ft per Section 042-1] | 32.5 ft | ||
| 070-1 | Beam Overall (BOA): {{xx.x}} ft | ||
| [Shall be less than 10 ft per Sections 042-1 and 084-1] | 10.0 ft | ||
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm | |
| 070-2 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| All | CNIC Work Boat Large Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 313-3: Exception: Offeror has no local distributor for Blue Seas voltmeters. Offeror proposes a BrandX Model xxx123 voltmeter in lieu of a Blue Seas voltmeter specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has used BrandX voltmeters in 300 boats in similar applications. |
N00024-19-R-22XX
File details come from the government source that posted it. Updated .