Attachment_04f_2015_IHS_of_83500_HAZMAT_Branch.pdf
PDF 649 KB Posted
- Attached to
- Depot Level Maintenance
- Solicitation number
- M00146-16-T-9008
- Issued by
-
United States Marine Corps
About this file
Attachment 04f
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
2015 PERIODIC INDUSTRIAL HYGIENE SURVEY
OF
83500 ENVIRONMENTAL OPERATIONS BRANCH
INDUSTRIAL HYGIENE DEPARTMENT
NAVAL HEALTH CLINIC
CHERRY POINT, NC 28533-0023
Enclosure (21)
TABLE OF CONTENTS
Executive Summary 3
Evaluation Summary 5
Personal Protective Equipment (PPE) Recommendations Summary 8
Individual Hazard Assessments
83500 Environmental Operations Branch 11
Recommended Medical Surveillance 20
Exposure Monitoring/Compliance Exposure Monitoring Plans 21
Ventilation Surveys 23
Exposure Monitoring - Air Sample Summary Tables 1 and 2
Exposure Monitoring - Noise Dosimetry Tables 3 and 4
Glossary Appendix A
Customer Evaluation Form Appendix B
EXECUTIVE SUMMARY
The periodic industrial hygiene survey of the Industrial Environmental Program Division Environmental Operations
Branch was conducted by Sam Henson, Industrial Hygienist, beginning in August 2015. The purpose of the survey was to evaluate any changes to work processes or work practices that have occurred since our previous survey in
2014.
1. Medical Surveillance: DODINST 6055.5 requires a registry of personnel occupationally exposed to hazardous chemicals and physical or biological agents to be developed for each workplace surveyed. This registry is used to ensure that each employee potentially exposed to a health hazard is enrolled in the appropriate medical surveillance program and is examined by an occupational health physician, physician assistant, audiologist, or other health care provider to detect any insidious or acute ill effects. This information is provided within this survey report. The FRC
East Division/Branch Secretary will compile the registries and schedule the required medical surveillance physicals with the Naval Health Clinic Occupational Medicine Department.
2. Hazard Communication/Materials Program: Personnel receive initial training to inform them of job-related potential hazards and necessary protective measures. Hazard specific training is conducted on a weekly basis from the FRC East Internal Television network (ITN). All hazardous materials are drawn from storage and distribution areas throughout the FRC East. The Hazardous Material Distribution Support Center (HDSC) maintains Authorized
Use Lists (AULs) for hazardous materials used by the shops.
Managers should ensure that personnel receive hazard specific training about the chemicals to which they are exposed. Under the HAZCOM standard, 29 CFR 1910.1200, “chemical” means any element, chemical compound or mixture of elements and/or compounds. Therefore, metal alloys (mixtures of elements) are considered to be chemicals. Personnel should be aware of the hazardous waste metals present. Additional training should be provided whenever process changes, employee transfers, new hazards, etc. occur.
3. Hearing Conservation and Noise Abatement: Interim Navy Medicine Hearing Conservation Program
Guidance (dated 13 Dec 2012) identifies 85 decibels (dBA) as the interim Bureau of Medicine and Surgery
(BUMED) OEL. Noise hazardous equipment and operations are identified in this survey including applicable
Hearing Protection Device (HPD) requirements. Hearing protective devices are required to be worn by all personnel whenever they work or enter an area or utilize tools/equipment where Sound Pressure Levels (SPLs), regardless of duration, are greater than 85 dBA. Operations with SPLs exceeding 96 dBA, regardless of duration, require double hearing protection. Most personnel were observed wearing appropriate hearing protection during the survey.
Hearing tests are required on employees working in areas where the 8-hour time weighted average is above 85 dBA
(OEL).
4. Emergency Eyewash /Shower Stations: The 83500 Environmental Operations Branch is currently equipped with plumbed emergency eyewash stations. Spot checks indicate inspection and testing logs have been maintained for emergency eyewash and shower units. Continue to maintain Logs for all units and conduct weekly inspections to comply with ANSI Z358.1.
5. Respiratory Protection: All aspects of the respiratory protection program were in compliance as set forth by 29
CFR 1910.134. Some of the stored respirators were not in compliance in that the cartridges were stored in same bag as respirator. Ensure there is a local guideline set to ensure the filters/ cartridges are reviewed and inspected periodically to ensure this does not happen.
6. Design Review: Industrial hygienists are required to actively participate in all facility planning, design, construction, and acceptance projects including both special and military construction projects to ensure appropriate hazard control techniques are applied. Please ensure all special projects, engineering designs, and purchasing contracts involving potential health hazards such as toxic materials, radiation, noise, or other health hazards are sent to the Industrial Hygiene Department for review.
7. Changes in Workplace Processes: This report reflects conditions and operations at this activity during the survey period. Please notify the Industrial Hygiene when significant changes occur in work center operations, chemical use, work processes, SOP revisions, or construction that may adversely affect worker health so review of documentation and evaluation may be conducted. Significant changes are defined as workplace modifications that require a change in recommended medical surveillance enrollment, personal protective equipment, or exposure control measures (e.g. ventilation, etc.). Supervisory personnel should be encouraged to notify the FRC-East Safety
Office when significant changes occur.
8. IH Customer Evaluation Form: A customer evaluation form is found in Appendix B of this report. The first half of the form is a general evaluation questionnaire and allows for suggestions of improving the services this department provides. The second half of the form provides an avenue for a specific complaint to be filed. Please complete this form as deemed necessary and return to the Naval Health Clinic Industrial Hygiene Department Head.
EVALUATION SUMMARY
PERIODIC INDUSTRIAL HYGIENE SURVEY
83500 BRANCH
New or Significantly Modified Work Center Operations/Processes?
No significant changes in operations/processes were identified.
The following changes were identified: (see comments)
Comments:
Program Findings and Recommendations
1. Medical Surveillance Program Status: Medical surveillance requirements are included in each shop section report to ensure Medical Surveillance Program enrollment(s) for applicable shop personnel. The FRC East Division representative will compile registries and schedule the required medical surveillance physicals with the Naval Health
Clinic Occupational Medicine Department.
No Medical Surveillance is Recommended.
Medical Surveillance is Recommended.
No Change in Medical Surveillance Recommendations.
Medical Surveillance Recommendations have changed as follows: Added: Blood and Bodily Fluids #178 &
Wastewater/Sewage Worker #702. Medical surveillance list will only be exposure based with the exception of
Respiratory Protection Program 716. All specialty exams are the responsibility of the management and employee.
2. Hazardous Material Control and Management (HMC&M) Program:
AUL Y N N/A Accurate Y N
MSDS & Hazardous Waste Profile Y N N/A Accurate Y N
HAZMAT Training Required? Y N (Note: IH does not track training completion).
Other (lead, asbestos, etc.): Y N
Comments: Shop personnel potentially exposed to harmful physical, biological, chemical agents and noted reproductive hazards and carcinogens are required to receive hazard training in accordance with OPNAVINST
5100.23series. Hazards and corresponding work tasks are identified in each shop assessment.
3. Management of Reproductive Hazards:
Reproductive Hazards Present? Y N
Any changes from previous survey? Y N
Comments: Reproductive hazards identified by the Navy and Marine Corps Public Health Center (NMCPHC) have been identified in these shops. It is recommended that wherever possible the work center reduce, minimize, and/or eliminate the reproductive hazards and personnel exposure.
4. Noise and Hearing Conservation Program (HCP):
Hearing Conservation Program (HCP) DoDI 6055.12, December 3, 2010 has been implemented since the last survey. Occupational Exposure limit is 85 dBA with a 3 db exchange rate.
Are personnel recommended for the HCP? Y N
Are personnel receiving audiograms? Y N N/A (Note: IH does not track training.
Is hearing protection (HP) readily available? Y N N/A
Is hearing protection used? Y N N/A Not Available for Observation
Comments: All personnel in 83500 are in the Hearing Conversation and Noise Medical Surveillance Programs.
Employees have various types of hearing protection which provide Noise Reduction Ratings (NRR) of 25-30 dBA.
There were two STS reported in this shop, according to the supervisor.
5. Respiratory Protection:
Are respirators used to control workplace exposures? Y N
Are they effective? Y N N/A
Is the Respiratory Protection Program satisfactory? Y N N/A
Comments: Respiratory protection is required for several operations, primarily filter maintenance operations. An
FRCE safety representative manages the Respiratory Protection Program including training, fit testing, and respirator selection requirements. China McCabe in the safety office is the RPPM.
6. Ventilation:
Are ventilation systems used to control workplace exposures? Y N
Are the systems effective and operating properly? Y N N/A
Comments: Employees stated that the cross-draft ventilation in the mixing room does not always operative correctly. Contact Facilities to schedule repairs to the supply side of this ventilation. At the time of this survey the ventilation was operating correctly. To improve the ventilation during the mixing process it is recommended to extend the ventilation top over the mixing drums to improve the capture of the organic vapors given off. See vent tables at the end of the workplace assessments.
7. Ergonomics:
Ergonomic risk factors were identified pertaining to shop work office/computer work
Available equipment/furniture incorporates good ergonomic design? Y N N/A
Ergonomic training conducted/recommended? Y N (Note: IH does not track training completion)
Comments and/or Recommendations: Employees in the mixing room are sometimes experiencing shoulder and wrist pain while mixing highly viscous resins using a pneumatic drill and extracting plungers from syringes.
Contact the FRCE ergonomics program manager for assistance and provide additional training. No complaints for office ergonomics.
8. Other Applicable Programs:
Lead Control
Asbestos Control
Carcinogens
Other
Comments: Stressors identified as known or suspected carcinogens by the Occupational Safety and Health
Administration (OSHA), the National Toxicology Program (NTP), the International Agency for Research on Cancer
(IARC), and the American Conference of Governmental Industrial Hygienists (ACGIH) are noted throughout this report.
American Conference of Governmental Industrial Hygienist (ACGIH) Carcinogen Categories:
A1= Confirmed Human Carcinogen
A2= Suspected Human Carcinogen
A3= Confirmed Animal Carcinogen with Unknown Relevance to Humans A4= Not Classified as a Human Carcinogen
Consultative or Special Surveys/Findings Since the Previous Survey: (check if none)
Changes to Specific Workplace Evaluations and Monitoring Plan
1. Workplace Assessments:
No significant change to workplace assessment information was identified.
The following significant workplace assessment changes were identified:
Comments:
2. Exposure Assessment:
New exposure data were obtained since the prior evaluation and are summarized below.
No change in any exposure assessment was identified as part of the survey or from sampling data.
The following changes in exposure assessments were identified:
Comments: Personnel exceed applicable limits for hexavalent chromium and cadmium during filter maintenance operations. Potential Lead exposures were found at build 4032 during filter change due to dry-film lube residual.
3. Findings and Recommendations:
There were no significant findings identified during this survey that require corrective action.
The following significant findings were identified:
Comments: Extensive cleaning shall be conducted at the recycle center inside and around Building 4785.
Employees need to be added to the Blood and bodily fluids medical surveillance program.
4. Exposure Monitoring Plan. Required Exposure Monitoring requests are located in the report.
Exposure monitoring needs were identified.
No Exposure monitoring needs were identified.
There are no changes to the previous Exposure Monitoring Plan.
Comments: Please contact the Naval Health Clinic Industrial Hygiene office 466-3251/4564/4551 to schedule requested exposure monitoring identified in this report.
PERSONAL PROTECTIVE EQUIPMENT (PPE) RECOMMENDATIONS SUMMARY
PPE use shall be implemented as outlined in JHA and 29 CFR 1910.120 App. B
WORK
PROCESS
HEARING
PROTECTION
FACE
AND/OR EYE
PROTECTION
CLOTHING
PROTECTION
HAND
PROTECTION
RESPIRATORY
PROTECTION
HW Field
Process
Management
Single Safety glasses Coveralls Nitrile or Green rubber gloves
N/R
Aluminum
Powder
Processing
(this process is going away)
Single Safety glasses Coveralls Nitrile gloves N/R
Oily Rag Hopper Single Safety glasses Coveralls Nitrile gloves N/R
Depressurize Gas
Cylinders
Single Safety glasses with face shield
Coveralls Nitrile gloves N/R
Puncturing
Aerosol Cans
Single Safety glasses with face shield
Coveralls with chemical resistant apron and sleeve protectors
Nitrile gloves N/R
Stencil-Paint
Drums
Single Safety glasses Coveralls with chemical resistant apron
Nitrile gloves N/R
Crushing Drums
& Cleaning
Drums
Single Safety glasses Coveralls Nitrile gloves N/R
Crush Oil Filters Single Safety glasses Coveralls Nitrile gloves N/R
Crushing Paint &
Blast Filters
Single N/A Tyvek coveralls Nitrile gloves Full-face P100
Decontaminating equipment for disposal at Used
Oil Berm
Single Safety glasses Coveralls Nitrile gloves N/R
Used Oil
Program
Processes
Single Safety glasses Coveralls Nitrile gloves N/R
Hearing Protection: When flight line operations of jet aircraft or helicopters’ are in taking off or landing or flyby, double hearing protection (i.e. earplugs and muffs) are required.
WORK PROCESS HEARING
PROTECTION
FACE
AND/OR EYE
PROTECTION
CLOTHING
PROTECTION
HAND
PROTECTION
RESPIRATORY
PROTECTION
Pumping non-Acid
Plating & Clean Dip
Tanks and Parts
Washers
Single Safety goggles or glasses w/ face shield
Coveralls with chemical resistant apron
Nitrile or Green rubber gloves
N/R
Pumping Plating
Acid Tanks
Single Safety goggles or glasses w/ face shield (if respirator not required)
Chemical splash suit
Black rubber gloves
**As required by incident and tank contents
Small-Scale
Asbestos Removal
Single N/A Tyvek coveralls Nitrile gloves Full-face P100
Plating Shop
Basement operations
(non-spills)
Single Safety glasses Coveralls Nitrile gloves N/R
Flightline JP-5 Fuel
Spills
Double as required by flight-Ops
N/A Tyvek coveralls Green rubber gloves
Full-face OV as required by incident
Emergency
Response
As required by incident
As required by incident
As required by incident
As required by incident
**As required by incident
Complete shop cleanups involving lead, cadmium, chromate, & other dust hazards
Single N/A Tyvek coveralls Nitrile gloves Full-face P100
Changing Paint &
Blast Filters
Single N/A Tyvek coveralls Nitrile gloves Full-face P100
HEPA Vacuum
Laser De-paint collection basin
Single Safety glasses Coveralls Nitrile gloves N/R
CR-2 Scrubber Filter
Removal
Single Safety glasses Tyvek coveralls Green rubber gloves
N/R by Gas-Free
WORK PROCESS HEARING
PROTECTION
FACE
AND/OR EYE
PROTECTION
CLOTHING
PROTECTION
HAND
PROTECTION
RESPIRATORY
PROTECTION
CR-2 Scrubber Filter
Decon
Single NA Green Chemical
Splash Suit
Black Rubber
Gloves
Full-face with acid cartridges
Six Other Scrubbers
Repair Work
Single Safety goggles
(if respirator not required)
Green Chemical
Splash Suit
Green Rubber
Gloves
**As
Required by
Gas-Free
All Solid Waste
Recycling Processes
Single Safety glasses Coveralls
Recommended
Leather gloves N/R
HM Mixing
(excluding liquid nitrogen work)
Single
(when operating mixing drill)
Safety glasses N/R Nitrile gloves N/R
HM Mixing – liquid nitrogen
N/R Safety glasses with face shield
Tempshield cryo-apron
Leather gloves N/R
HM Dispensing Single (when entering noise hazardous shops during delivery)
Safety goggles or glasses w/face shield
Chemical splash resistant apron
Nitrile gloves or
Green rubber gloves
N/R
Safety protective footwear is required at all times.
N/R – None Required
N/A – Not applicable due to full-face respirator use
**Respirator filter/cartridges used when required:
P100 filters
OV cartridge
AM/CD/CL/FM/HC/HF/HS/MA/OV/SD/P100 (color may vary)
Note: PPE requirements are located in the shop job hazard assessment (JHA).
PPE table may not be all inclusive of HAZMAT operations or PPE name synonyms.
WORKPLACE INFORMATION AND EXPOSURE ASSESSMENT
Base Location: MCAS Cherry Point Organization/ UIC Code: FRCE (65923)
Shop: Environmental Operations/ Management
(ADM and CTF)
Location: bldg. 423, 4785, 137, 133, 4247, 1694, 4035, 4225, Throughout all FRCE buildings.
Supervisor: Michael Donahue Phone: 464-9297
# of Personnel: 13 Mil: 0 Civilian: 13 Male: 12 M; 1F
Industrial Hygienist: Sam Henson Shop Periodicity/Date: Annual/ July to Oct 2015
Description of Operations: Hazardous Waste Disposers at the central transfer facility are trained in hazardous waste operations and in hazardous materials emergency response. These personnel are also “on-call” employees. Solid Waste
Recyclers are cross-trained to perform these duties excluding emergency response operations.
OPERATIONS & ASSOCIATED
HAZARDS/ WORKERS
Reproductive/Carcinogens
DURATION/
FREQUENCY
OF EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
EXPOSURE
ASSESSMENT
Hazardous waste management/2:
Noise, Organic vapors and solvents, alodine, nickel, cadmium, barium, chromium, particulate aerosols contaminated with heavy metals
Ergonomics
Carcinogens and suspected carcinogens: yes
Reproductive hazards: yes
HEPA VAC FILTER CHANGE
BE, Cd, Cr, CrVI
> 6 hrs./daily (E) Earplugs and/or muffs, safety glasses with side shields, safety goggles, safety shoes, respirators w/ organic vapor and
100),gloves, hip boots, coveralls, Tyvek coveralls, chemical splash suits, sleeve protectors, face shields, chemical resistant aprons .
Noise: UNACCEPTABLE:
Heavy metals:
OV: ACCEPTABLE based on existing controls.
Aromatic hydrocarbon vapors: ACCEPTABLE:
based on existing controls.
Particulate aerosols:
UNACCEPTABLE based on recent EM. See results table.
Operations/ Hazards/ Recommendations: Operations Admin is one supervisor a relief supervisor and administrative asst.
Office Ergonomics: Employees work administratively at computer workstations and various other tasks as necessary to fulfill the Command’s mission. Tasks or jobs that require long periods of static posture may require several, short rest breaks
(micro breaks or rest pauses). During these breaks users should be encouraged to stand, stretch, and move around. This provides rest and allows the muscles enough time to recover.
Noise: Exposure monitoring continues to indicate personal exposures are expected to exceed the OEL. Enrollment in the
Hearing Conservation Program is required. Noise is a developmental reproductive hazard. Additional noise dosimetry will be collected to confirm this assessment.
Chemical: Exposures to organic vapor chemicals are not expected to exceed the OEL since potential exposures indicate so and are incidental for management. CrVI exceeded OEL during HEPA vacuum work.
Aluminum Powder Processing: This process is going away.
Potential explosion hazard in air and water. Particulate aerosols that may contain lead, cadmium and chromates/10
Carcinogens and suspected carcinogens: yes
Reproductive hazards: yes
8 hrs./daily for approx. 4 to 8 weeks/year
(E) Containers grounded, Single hearing protection, safety glasses, coveralls, nitrile gloves, full-face respirators
ACCEPTABLE based on grounding. However, because this dust may be contaminated with lead, cadmium and/or chromates, exposure monitoring is required.
Depressurizing: Calibration Gas
Cylinders: Hexane, isobutylene, methane, helium, nitrogen and argon/10
Carcinogens and suspected carcinogens: None
Reproductive hazards: None
2 hrs/monthly (E) carbon filter, natural ventilation, Single hearing protection, safety glasses w/face shield, coveralls, nitrile gloves
ACCEPTABLE based on limited exposures and existing controls methods.
OPERATIONS & ASSOCIATED
HAZARDS/NUMBER OF WORKERS
DURATION/
FREQUENCY OF
EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
EXPOSURE
ASSESSMENT
Puncturing Aerosol Cans: Methyl Ethyl
Ketone, chromates, xylene, toluene and benzene/10 carcinogens: yes
Reproductive hazards: yes
4 hrs/weekly (E) Aerosol filtration, natural ventilation, coveralls, chemical aprons and sleeve protectors, safety glasses w/face shield, single hearing protection and nitrile gloves
ACCEPTABLE: based on exposure monitoring results and existing work control methods and outdoor work. Chromates and Benzene are known human carcinogens.
Use proper filtering devices.
See exposure results in table at the end of the report
Stencil Painting Drums: Volatile organic chemicals/10
30 min/daily-Ave (E) Natural ventilation single hearing protection, safety glasses, coveralls or work gear, nitrile gloves, aprons and sleeve protectors
ACCEPTABLE: based on existing controls.
Crushing Oil and Fuel Filters:
Petroleum oils, lubricants, solvents and
VOCs/10
2 hrs/weekly (E) Natural ventilation, single hearing protection, safety glasses, coveralls or work gear, nitrile gloves
ACCEPTABLE: based on
Limited exposures and existing controls.
Crushing and Cleaning Drums:
Petroleum oils, lubricants and solvents/10
30 min/weekly (E) Natural ventilation, single hearing protection, safety glasses, coveralls or work gear, nitrile gloves
ACCEPTABLE: based on limited exposures existing controls.
Decon Equipment for Disposal at the berm:
Hydraulic oils/10
Varies/biweekly (E) Natural ventilation, single hearing protection, safety glasses, coveralls or work gear, nitrile gloves
ACCEPTABLE: based on low toxicity and existing controls.
Processing Used Oil: Petroleum oils, lubricants and solvents/10
1 hr/daily (E) Single hearing protection, safety glasses, coveralls or work gear, nitrile gloves
ACCEPTABLE: based on limited exposures and existing controls.
Draining and Cleaning Parts Washers, non-Acid Plating and Dip Tanks-
Various BLDGS: VOCs, cyanide sludge, sodium hydroxide, alkaline de-scaler solution /10 carcinogens: No
Reproductive hazards: No
Varies/weekly (E) Local exhaust ventilation, SCBAs, Single hearing protection, safety glasses or goggles w/face shield, aprons, nitrile or rubber gloves, full face respirators
ACCEPTABLE: based on limited exposures and existing controls.
SCBA’s are only used in emergency
FREQUENCY
OF
EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
Draining and Cleaning Acid Plating and
Dip Tanks: Chromic, sulfuric and nitric acids, heavy metal sludge’s and solutions/10
Carcinogens and suspected carcinogens:
yes
Reproductive hazards: yes
Varies/weekly (E) Local exhaust ventilation, SCBAs, Single hearing protection, safety glasses or goggles w/face shield, chemical aprons/suits, nitrile or rubber gloves, full face respirators
ACCEPTABLE: based on
PPE and existing controls.
Chromic acid is a known human carcinogen.
Small-Scale Asbestos Removal: Asbestos fibers/1
Carcinogens and suspected carcinogens:
yes
Reproductive hazards: none
Varies/yearly (E) Wet methods, single hearing protection, safety glasses or goggles Tyvek suits, nitrile gloves, full-face
P100 respirators
UNACCEPTABLE: based on SOP.
Operations/ Hazards/ Recommendations:
Small-Scale Asbestos Removal: One employee has been trained and certified to perform small-scale asbestos removal operations if needed. Personnel conduct wet method gasket work up to one glove bag. PPE requirements are full-face respirators with P100 filters, Tyvek coveralls, nitrile gloves, safety shoes, and single hearing protection.
Collecting Samples of Sump Solutions:
acidic and alkaline/1-2 min/weekly
(E) Single hearing protection, safety glasses, coveralls or work gear, nitrile gloves.
ACCEPTABLE: due to duration and SOP.
Fuel Spill Cleanup: Noise, JP-5/1-12 Varies/6 times yearly
(E&R) Single or double hearing protection, safety glasses or goggles Tyvek suits, green rubber gloves, full-face respirators
ACCEPTABLE: based on SOP.
Glove box, Paint and Blast Booth Cleanup:
Lead, cadmium, and chromate contaminated dusts/10
Carcinogens and suspected carcinogens:
yes
Reproductive hazards: yes
Varies/2-3 times yearly
(E) HEPA vacuums, single hearing protection, safety glasses or goggles Tyvek suits, nitrile gloves, full-face P100 respirators
UNCERTAIN: based on
SOP. Lead and lead compounds are reasonably anticipated to be human carcinogens. Cadmium and Chromates are confirmed human carcinogens.
Replacing Paint and Blast Filters: Lead, cadmium, and chromate contaminated dust aerosols/10
Carcinogens and suspected carcinogens:
yes
Reproductive hazards: yes
Varies/weekly
Small-30 min
Large->24hrs
(E) Single hearing protection, safety glasses or goggles Tyvek suits, nitrile gloves, full-face P100 respirators
UNACCEPTABLE:
Personal exposures are expected to exceed the
PEL.
Glove box, Paint and Blast Booth Cleanup/ Replacing Paint and Blast Filters/ Dumping Containment Drums:
Lead, Cadmium, Chromates: Lead compounds are reasonably anticipated to be human carcinogens. Cadmium and
Chromates are confirmed human carcinogens. Compliance exposure monitoring (CEM) is required for these exposure potentials due to past exposures exceeding the applicable regulated standards. Due to lack of CEM since 2009, shop 83500 is out of compliance as required per annual. Exposures during Glove box and Blast Booth cleanup are unknown, but are expected to exceed the applicable standards based on similar overexposures of shop blasting personnel during cleanup operations. Please continue to contact IH when filter change out operations are being conducted to schedule EM/CEM.
FREQUENCY
OF
EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
Vacuum Laser Residue Collection
Basin/10: Lead, cadmium, and chromate contaminated dust
Carcinogens and suspected carcinogens:
yes
Reproductive hazards: yes
Varies/weekly
Seldom
(E) HEPA vacuums, single hearing protection, safety glasses, coveralls or work gear, nitrile gloves
ACCEPTABLE: based controls and SOP.
CR-2 Scrubber Demister Pad Removal/5:
heavy metals
8 hrs/yearly (E) Single hearing protection, safety glasses or goggles Tyvek suits, green rubber gloves, level B
ACCEPTABLE: based on work practices in SOP and past/recent EM results.
CR-2 Scrubber Filter Decon/5:
Hydrochloric acid and heavy metals
40 hrs/yearly
8hrs/day;5days/ wk-as required
(E) Single hearing protection, splash suits, black rubber gloves, full-face respirators
ACCEPTABLE: based on work practices in SOP.
CR-1, A-OH-1, A-OH-2, OH-1, A-OH-3 &
A-OH-4 Repairs/5, heavy metals
1 to 3 days/yearly
(E) Single-hearing protection, splash suits, green rubber gloves, full-face respirators
ACCEPTABLE: based on work practices and
SOP.
Response to Biological Spill/10: blood borne pathogens and waste water.
Human waste; bloodborne pathogens and other Potentially Infectious Material (OPIM), and mold.
5-10/Yr (E) Safety Eyewear, Impermeable gloves
(nitrile, neoprene)
Unacceptable: Potential for exposure to blood and/or body fluids.
Response to mercury spill (i.e. light bulbs)/10
1-5/yr (R) Chemical vapor goggles, Mercury Vapor respirator, gown and hood.
(R) Mercury vacuum cleaners and water-soluble mercury decontaminant.
(R) Provide local
Exhaust Ventilation
Uncertain/
Unacceptable: Call IH to assess next spill.
Bloodborne pathogens (BBP) and Bodily Fluids OPIM are pathogenic microorganisms present in human blood that can cause disease in humans. These pathogens include, but are not limited to, Hepatitis B (HBV), Hepatitis C (HCV), and Human
Immunodeficiency Virus (HIV). Hepatitis B can survive in dried blood specimens for several days. HAZMAT personnel are potentially exposed to bloodborne pathogens and OPIM when taking care of human spills. Personnel should continue to control personal exposures with universal (standard) precautions and PPE such as impermeable coveralls, nitrile gloves, and eye-shields when contact with blood, mucous membranes, or non-intact skin is anticipated, or when handling contaminated items or surfaces. Tetanus, diphtheria and pertussis (Tdap) vaccine should be updated according to current recommendations.
Personnel will be placed on medical surveillance for blood and bodily fluids BBP-178 and WWWSW-702.
Mercury Spill Response: Employee exposure to mercury from accidental spills that can occur during repair of broken bulbs, thermometers, sphygmomanometers, or during sterilization and centrifugation of thermometers in maintenance areas.
When mercury is exposed to the air, as in the case of a spill, it slowly vaporizes. Acute inhalation of mercury vapor may result in toxicity including chills, nausea, and general malaise, tightness in the chest, chest pains, dyspnea, cough, stomatitis, gingivitis, salivation, and diarrhea.
1. USE THE FOLLOWING EXPOSURE CODES:
ACCEPTABLE – ONE WHERE THE IH WILL NOT EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED
OEL.
UNCERTAIN – ADDITIONAL DATA NEED TO BE COLLECTED TO CLARIFY THE EXPOSURE ASSESSMENT.
THE IH SHOULD MAKE AN INTERIM EXPOSURE ASSESSMENT BASED ON OBSERVATION OF THE PROCESS
AND/OR PROFESSIONAL JUDGMENT.
UNACCEPTABLE – ONE WHERE THE IH WILL EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED
OEL.
SKIN – THE MATERIAL POSES A SKIN ABSORPTION HAZARD
REPRODUCTIVE HAZARD – THE MATERIAL IS A NAVY-RECOGNIZED REPRODUCTIVE HAZARD
CARCINOGEN – THE MATERIAL CONTAINS > 0.1% OF AN OSHA, ACGIH, IARC, OR NTP-RECOGNIZED
CARCINOGEN
American Conference of Governmental Industrial Hygienist (ACGIH) Carcinogen Categories:
A1= Confirmed Human Carcinogen A2= Suspected Human Carcinogen
A3= Confirmed Animal Carcinogen with Unknown Relevance to Humans
Base Location: MCAS Cherry Point Organization/ UIC Code: FRCE (65923)
Shop: Environmental Operations/ Management
Mixing Room/ Dispensing Room
Location: Bldg. 137/ 4247
Supervisor: Michael Donahue Phone: 464-9297
# of Personnel: 4 Mil: 0 Civilian: 4 Male: 4
Industrial Hygienist: Sam Henson Shop Periodicity/Date: Annual/ July to Oct 2015
Description of Operations: Hazardous Waste Disposers at the central transfer facility are trained in hazardous waste operations and in hazardous materials emergency response. These personnel are also “on-call” employees. Solid Waste
Recyclers are cross-trained to perform these duties excluding emergency response operations.
OPERATIONS & ASSOCIATED
HAZARDS/NUMBER OF WORKERS
Reproductive/Carcinogens
DURATION/
FREQUENCY
OF
EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
EXPOSURE
ASSESSMENT
HAZMAT Dispensing/2: P-D-680, Isopropanol, Acetone, Epon Resin 828, Alcohol, Engine Oil (23699), Alodine, etc.
Carcinogens and suspected carcinogens: yes
Reproductive hazards: None
8 hrs/daily (E) Single hearing protection, safety glasses or goggles with face shield, splash aprons, neoprene/nitrile/ rubber gloves, full-face respirators, Ventilation
ACCEPTABLE: based on existing controls.
Hexavalent chromium
(CrVI) is a reproductive hazard and a known human carcinogen. Epon Resin
828 is a skin sensitizer.
Mixing Liquid Nitrogen: Skin contact can cause cryogenic burns/4
Heat Stress
Varies/daily (E) Safety glasses with face-shield, cryogenic aprons, leather gloves
ACCEPTABLE: based on existing controls.
HAZMAT Mixing: Noise, Ergonomics, Epichlorohydrin (A3), Organic Vapors:
Toluene, Xylene, MEK etc/4;
Epichlorohydrin may penetrate the skin
Carcinogens and suspected carcinogens: yes
Reproductive hazards: yes
Varies/daily (E) Safety glasses, butyl rubber or viton gloves, full-face respirators, earplugs
UNCERTAIN: See below and results in table 1
Please call IH for EM scheduling.
HAZMAT Mixing/ Dispensing/4:
Noise: Initial sound level readings taken in the mixing room indicates potential personnel may exceed the OEL for hazardous noise. The mixing drill sound levels were measured at 98.7 dBA and the pneumatic sealant tube gun retainer levels were measured at 88.5 dBA. Personnel were not wearing hearing protection during operations. Ensure personnel wear single hearing protection while operating this equipment. Additional noise dosimetry will be conducted to further evaluate this assessment.
Chemical Exposures: Various chemicals are used in the mixing room. Exposures exceeding the OEL is not expected due to chemicals limited duration, concentrations of mixtures and ventilation, but exposures are unknown therefore initial exposure monitoring will be conducted to further evaluate exposures. All current exposures to various organic vapors taken thus far have not exceeded the occupational exposure levels. Epichlorohydrin, Toluene, Xylene are all reproductive hazards.
Epichlorohydrin is an animal carcinogen with no known relevance to humans.
Ventilation: Complaints of defective/ air conditioning ventilation system during summer months are recurring. Employee complaints of the temperatures being elevated within the room and then becomes uncomfortable. Elevated temperatures become Indoor Air Quality (IAQ) issues and may also elevate potential organic vapor chemical exposures. Employees have obtained two portable A/C units for supplemental cooling. Please ensure they are maintained properly.
Ergonomics/Work place Musculoskeletal Disorders: Personnel are at risk for shoulder, back and upper extremity injuries when using a pistol grip pneumatic drill with an attachment to mix high viscosity 2-part potting compounds. To perform this task, an employee sits in a chair, leans forward, and holds a five gallon bucket securely with both feet. Forceful exertions of the hands are necessary due to the high torque requirements of this task. Extensive forward bending of the torso at the waist fatigues the muscles of the back and neck. The muscles of the arms and shoulders are also overburdened by working in this awkward posture. To reduce ergonomic stresses, the employee first dispenses the chemicals from the 55-gallon drums into 1-gallon buckets and then further dispenses into smaller containers.
1. USE THE FOLLOWING EXPOSURE CODES:
ACCEPTABLE – ONE WHERE THE IH WILL NOT EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED
OEL.
UNCERTAIN – ADDITIONAL DATA NEED TO BE COLLECTED TO CLARIFY THE EXPOSURE ASSESSMENT.
THE IH SHOULD MAKE AN INTERIM EXPOSURE ASSESSMENT BASED ON OBSERVATION OF THE PROCESS
AND/OR PROFESSIONAL JUDGMENT.
UNACCEPTABLE – ONE WHERE THE IH WILL EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED OEL.
SKIN – THE MATERIAL POSES A SKIN ABSORPTION HAZARD
REPRODUCTIVE HAZARD – THE MATERIAL IS A NAVY-RECOGNIZED REPRODUCTIVE HAZARD
CARCINOGEN – THE MATERIAL CONTAINS > 0.1% OF AN OSHA, ACGIH, IARC, OR NTP-RECOGNIZED
CARCINOGEN
American Conference of Governmental Industrial Hygienist (ACGIH) Carcinogen Categories:
A1= Confirmed Human Carcinogen A2= Suspected Human Carcinogen
Base Location: MCAS Cherry Point Organization/ UIC Code: FRCE (65923)
Shop: Environmental Operations/ Management
Recycling Center
Location: Bldg. 4785 and all satellite waste sites throughout
FRCE
Supervisor: Michael Donahue Phone: 464-9297
# of Personnel: 4 Mil: 0 Civilian: 3 Male: 3
Industrial Hygienist: Sam Henson Shop Periodicity/Date: Annual/ July to Oct 2015
Description of Operations: Hazardous Waste Disposers at the central transfer facility are trained in hazardous waste operations and in hazardous materials emergency response. These personnel are also “on-call” employees. Solid Waste
Recyclers are cross-trained to perform these duties excluding emergency response operations. All recyclers do the recycling work.
OPERATIONS & ASSOCIATED
HAZARDS/NUMBER OF WORKERS
Reproductive/Carcinogens
DURATION/
FREQUENCY
OF
EXPOSURE
CONTROLS
Recommended (R)
Existing (E)
EXPOSURE
ASSESSMENT
Solid Waste Recycling: Ergonomics, Back
Injury, Lacerations, heat stress, Noise etc./
8 hrs/day (E) Single hearing protection, safety glasses, leather gloves, lifting aids, team lifting
Ergo: Acceptable: based on existing controls excluding PPE.
Noise: Uncertain
Solid Waste Recycling: Metals Exposure, Cadmium, Chromium, Lead etc.
8 hrs/ day (E) PPE, Hygiene practices, limited
Acceptable: based on current air sampling results.
Solid Waste Recycling: Exhaust Gases/
Fumes
8 hrs/ day (E) Limited duration along with work practices
Acceptable.
Recommendations:
Hazardous Noise Areas: Personnel enter noise hazardous areas on a regular basis when collecting recycling materials.
Personnel can be expected to exceed the 85 dBA when working a full day in collecting recycled materials. . It is important to protect the workers hearing when entering these work places. Ensure personnel wear the level of hearing protection required in each work center visited. Noise dosimetry conducted by Industrial hygiene indicated overexposures to hazardous noise.
Ensure employees remain on the noise medical surveillance program. Noise is a developmental reproductive hazard.
Ergonomics/Back Injury: Personnel are at risk for shoulder, back and upper extremity injuries when moving equipment and parts. Forceful exertions of the hands are necessary due to the requirements of this task. Extensive forward bending and twisting of the torso at the waist fatigues the muscles of the back and neck. The muscles of the arms and shoulders are also overburdened by working in awkward postures. If heavy items must be lifted manually, use two employees whenever possible.
The use of two employees when using proper lifting techniques will generally reduce the hazard of any lift.
Metals Exposure: As expected, past air sampling results taken during metals recycling operations indicated that there were no exposures exceeding the occupational exposure limits Due to limited potential exposures during operations. Metals wipe samples taken on person and throughout the recycling center and equipment indicate that better hygiene practices must be met.
Residual metals samples revealed metals on surfaces throughout area. This information is provided in a separate IH request report sent through the safety office. It is recommended that all equipment and administrative (e.g. desks, break room, water fountain refrigerator etc.) areas be wiped down daily to reduce potential ingestion of toxic metal dusts.
Exhaust Gas/Fume Exposure: When operating powered industrial trucks the potential concentration of fumes is a major hazard. Unconsciousness and death may result from carbon monoxide overexposure as the concentration in the bloodstream rises. Do not operate a combustion engine within a warehouse, plant or onboard ship without adequate ventilation. Shut the engine off when staying inside a small confined area like a trailer. Be careful in cold weather. Doors and windows which are normally open may be closed and exhaust and other gases may concentrate. Be careful in small rooms or blocked off areas where gases may accumulate. Drive sensibly. Avoid racing the engine or idling for long periods of time.
1. USE THE FOLLOWING EXPOSURE CODES:
ACCEPTABLE – ONE WHERE THE IH WILL NOT EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED
OEL.
UNCERTAIN – ADDITIONAL DATA NEED TO BE COLLECTED TO CLARIFY THE EXPOSURE ASSESSMENT.
THE IH SHOULD MAKE AN INTERIM EXPOSURE ASSESSMENT BASED ON OBSERVATION OF THE PROCESS
AND/OR PROFESSIONAL JUDGMENT.
UNACCEPTABLE – ONE WHERE THE IH WILL EXPECT THE SEG TO BE EXPOSED ABOVE THE SELECTED OEL.
SKIN – THE MATERIAL POSES A SKIN ABSORPTION HAZARD
REPRODUCTIVE HAZARD – THE MATERIAL IS A NAVY-RECOGNIZED REPRODUCTIVE HAZARD
CARCINOGEN – THE MATERIAL CONTAINS > 0.1% OF AN OSHA, ACGIH, IARC, OR NTP-RECOGNIZED
CARCINOGEN
American Conference of Governmental Industrial Hygienist (ACGIH) Carcinogen Categories:
A1= Confirmed Human Carcinogen
A2= Suspected Human Carcinogen
Navy and Marine Corps Public Health Center Technical Manual NMCPHC-TM OM 6260; August 2015 https://nmcpeh-simweb.med.navy.mil/Content/medMatrix/MedicalMatrix.pdf
Are employees potentially exposed to toxic chemicals or hazardous physical agents?
Yes X No __
If no, provide rationale.
RECOMMENDED MEDICAL SURVEILLANCE PROGRAMS
RECORDED BY: SAM HENSON
COMMAND: FRCE/6.5.3
INDUSTRIAL ENVIRONMENTAL PROGRAM DIVISION –
83500 ENVIRONMENTAL OPERATIONS BRANCH
BUILDING NUMBER: MULTIPLE:423,4785,137,133,4247,
1694, 4035, 4225 ETC
POC: MICHAEL DONAHUE
PHONE: 464-9297
TOTAL PERSONNEL: 15`
Recommended Program Work Operation # Emp. Rationale
#711 – Hazardous Waste
Workers & Emergency
Responders-
Annual
Hazardous Waste Work (HW
Handlers & Solid Waste
Recyclers; E&I
Emergency Response (HW
Disposers only)
Required program
#716 – Respirator User
Age 15-34 every five yrs
34-44 three yrs
> 45 Annual
HW Handlers & Solid Waste
Recyclers/Disposers
10 Required program
#712 - Motor Vehicle Operator
(HAZMAT Transport)
HW Handlers & Solid Waste
Recyclers
10 Required program
#133 - Chromic Acid/
- Chromium VI-Annual
#124 – Cadmium-Annual
#161 – Lead-Annual
Blast & Paint Filter
Maintenance
(HW Handlers & Solid Waste
Recyclers)
10 Required program
#710 - Forklift Operator
> 59yrs old 5yrs
HW Handlers & Solid Waste
Recyclers
10 Required program
#706 – DOT Vehicle Operator
2yrs
HW Handlers & Solid Waste
Recyclers
10 Required program
#503 – Noise-Annual HW Handlers & Solid Waste
Recyclers
All Work areas adjacent to flightline & engine test area; Expected to exceed the OEL for noise >30 days/year
#113 – Asbestos, Current Worker
Annual
Asbestos Abatement 1
Performing small scale asbestos abatement jobs
#178- BBP and OPIM
1time/exposure
Response to human bodily fluid spills
11 Blood and other potentially infectious materials.
#702 Wastewater/Sewage
Worker-5yrs
Response to wastewater spills and backup cleanup.
11 Tetanus, diphtheria and pertussis
(Tdap) vaccine should be updated according to current recommendations.
#502 Heat- Annual HW Handlers & Solid Waste
Recyclers https://nmcpeh-simweb.med.navy.mil/Content/medMatrix/MedicalMatrix.pdf
FY15/16 EXPOSURE MONITORING
IHT: please see IH prior to scheduling EM: See EM in tables at the end of report to see what EM was already complete for FY15.
Operation/ Bldg. Potential
Hazard
#No.
Samples
Sample location Method Sample
Freq
Man
Hr /yr
All Powder Processing &
Collection
Bldgs 137 & 423
CrVI, Pb &
Cd
2 BZ F 2 16
Mixing 1826B-2 & 8802
Sealing Compounds
B-137 during summer months
Toluene, MEK &
Various
VOCs
6 BZ AT 2 48
Mixing/ Filling, recycling
B-137/ throughout.
Noise 2 ea HZ PD 2 32
CTF/Solid Waste Noise 2 HZ PD 3 48
Metal Spray Filter Change out Metal scan
/CrVI
4 BZ F 2 32
Blasting Drum Clean Dump
B-4034/3766/ 1798/133
Metal Scan/
CrVI
3 BZ F 1 24
Chemical Dispensing B-4380 Acetone/
Alcohol
2 ea BZ AT 2 16
Chemical Dispensing
Mixing Rm Bldg. 4380/ 137
Ventilation
Various OV
Alcohol, Acetone
1/ACH
Each
SZ DR 1 1
HEPA filter Clean/Service Various
Metals/
CrVI etc
2 BZ F 2 32
I=Intermittent DR=Direct Reading BZ=Breathing Zone HZ=Hearing Zone
C=Continuous BI=Bubbler/impinger PD=Personal Dos. AT=Adsorption Tube Y=Yes/N=No IT=Indicator Tube GA=General Area SZ=Source Zone F=Filter
O=Other
FY15/16 COMPLIANCE EXPOSURE MONITORING PLAN
IHT: please see IH prior to scheduling EM
Operation Potential Hazard #No.
Samples
Sample location
Method Sample
Freq
Man
Hr/yr
Blast Filter Maintenance
Bldgs. 4034, 3766, 137, 133, & 1798
Lead-(1798 only)
Cadmium
CrVI
2 BZ BZ F 2 16
Paint Filter Maintenance
Bldg. 245 New Side & Old
Side; All booths in Bldgs.
137 & 133; 1798 & 4032
Lead-(1798/ 4032 only)
Cadmium
CrVI
2 BZ BZ F 2 16
I=intermittent
DR=Direct Reading
BZ=Breathing Zone
HZ=Hearing Zone
C=continuous BI=Bubbler/impinger PD=Personal Dos. AT=Adsorption Tube
Y=Yes/N=No IT=indicator Tube GA=General Area SZ=Source Zone F=Filter O=Other
NAVAL HEALTH CLINIC, CHERRY POINT, NC 28533-0023
VENTILATION HOOD/SYSTEMS EVALUATION
Activity: FRCE Supv./Phone: Mike Donahue/9297 Log #: 16V-0012/0013
SECTION I – HOOD/SYSTEM LOCATION
Shop: 83500 Environmental Operations Branch Bldg: 137, 423
SECTION II – INSTRUMENTATION
Make:
TSI Model: 9565-P
S/N:
9565P1439009
Calibration
Date:
Sep 2014
SECTION III – HOOD SYSTEM/EVALUATION (MIXING ROOM)
Contaminant(s) Controlled: Various Organic Vapors: Acetone
SYSTEM DIAGRAM
(Not to scale)
MEASUREMENTS
BLDG/HOOD # DIMENSIONS
(Ft)
FACE AREA
(Ft
CAPTURE
VELOCITY
(FPM)
RECOMMENDED
CAPTURE
VELOCITY
*(FPM)
SMOKE
TUBES
137-Mixing Booth 4x4
16 179 50-100 Rapid
137-Mixing Room
ACH
6720 Ft
N/A 40.5 RACH 6 ACH Moderate
SECTION IV – COMMENTS: *Recommended capture velocity of 50-100 FPM for the control of vapors released with practically no velocity into quiet air, per ACGIH Ventilation Manual, 25th Ed. (pg. 3-6/Table 3-1) and
Recommended ACH per 29 CFR 1910.106. Flammable and Combustible liquids. Ventilation system provides adequate capture velocity and Room Air Changes per Hour.
Surveyed by: Sam Henson Date: July 2015
NAVAL HEALTH CLINIC, CHERRY POINT, NC 28533-0023
VENTILATION HOOD/SYSTEMS EVALUATION
Activity: FRC EAST SupervisorPhone: Mike Donahue/9297 Log #:16V-0011
SECTION I- HOOD/SYSTEM LOCATION
Shop: 83500 Environmental Operations Branch Bldg: 4380
SECTION II- INSTRUMENTATION
Make: TSI Model: 9565P1439009 Calibration Date: Sep 2014
SECTION III – HOOD SYSTEM/EVALUATION (Dispensary)
Contaminate controlled: Various Organic Vapors
SYSTEM DIAGRAM
(Not to scale)
MEASUREMENTS
BLDG/ID# EXHAUST/HOOD
SYSTEM
Actual (ACH) Required (ACH)
* Meets (ACH)
(Y/N)
Dispensary
Y *Recommended ACH per 29 CFR 1910.106, Flammable and Combustible liquids
(ft) indicates feet (ft) indicates cubic feet
(ft2 ) indicates square feet (cfm) indicates cubic feet per minute
(ACH) indicates air changes per hour (min) indicates minute
Room Dimensions: 12.16 ft (l) x 10.25 ft (w) x 12 ft (h)=1495 ft
Vent Dimensions: 0.44ft (w) x 1.10 ft (l)= .48 ft
Total Exhaust: 3759 cfm
ACH = (3759 cfm)(60 min) = 150 ACH
Surveyed by: Sam Henson/Aquiles Faustino Date: July 2015
277 234
270 268
Left side of room = 243 cfm
Right side of room = 429 cfm
Table 1
Air Sample Summary - Exposure Monitoring Fleet Readiness Center East; HAZMAT Shop 83500
2015 EM Results
Field Sample IDs Sample Date Hazard TWA Value UCL OEL OEL Value
15-0115, 15-0116 2014/11/22 CADMIUM
0.00022240 mg/m3
0.00063088 mg/m3
OSHA 8 hr TWA
(CADMIUM AND
COMPOUNDS AS CD
TOTAL)
0.0050 mg/m3
15-0115, 15-0116 2014/11/22 LEAD
0.0013479 mg/m3
0.0038237 mg/m3
OSHA 8 hr TWA
(LEAD AND
INORGANIC
COMPOUNDS AS PB)
0.05 mg/m3
15-0107, 15-0108 2014/11/22 CHROMIUM(VI)
0.0019970 mg/m3
0.0022140 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0118, 15-0119 2014/11/22 LEAD
0.0013479 mg/m3
0.0038237 mg/m3
OSHA 8 hr TWA
(LEAD AND
INORGANIC
COMPOUNDS AS PB)
0.05 mg/m3
15-0118, 15-0119 2014/11/22 CADMIUM
0.00024240 mg/m3
0.00071218 mg/m3
OSHA 8 hr TWA
(CADMIUM AND
COMPOUNDS AS CD
TOTAL)
0.0050 mg/m3
15-0110, 15-0111 2014/11/22 CHROMIUM(VI)
0.0056052 mg/m3
0.0057081 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0121 2014/11/22 LEAD
0.00089862 mg/m3
0.083149 mg/m3
OSHA 8 hr TWA
(LEAD AND
INORGANIC
COMPOUNDS AS PB)
0.05 mg/m3
15-0121 2014/11/22 CADMIUM
0.000035945 mg/m3
0.0082609 mg/m3
OSHA 8 hr TWA
(CADMIUM AND
COMPOUNDS AS CD
0.0050 mg/m3
TOTAL)
15-0113 2014/11/22 CHROMIUM(VI)
0.00078792 mg/m3
0.0012732 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0233, 15-0234, 15-0235, 15-0236, 15-0237
2015/02/26
METHYL
ETHYL
KETONE
22.196 mg/m3 371.05 mg/m3
Navy 8 hr TWA
(METHYL ETHYL
KETONE)
590.0 mg/m3
15-0239, 15-0240, 15-0241, 15-0242, 15-0243, 15-0244, 15-0245, 15-0246
2015/02/26 ISOPROPANOL
0.58513 mg/m3
11.718 mg/m3
ACGIH 8 hr TWA
(ISOPROPANOL)
492.0 mg/m3
15-0260, 15-0261, 15-0262, 15-0263, 15-0264, 15-0265, 15-0266, 15-0267, 15-0268, 15-0269
2015/03/04 ISOPROPANOL 1.6780 mg/m3 11.635 mg/m3 ACGIH 8 hr TWA
(ISOPROPANOL)
492.0 mg/m3
15-0253, 15-0254, 15-0255, 15-0256, 15-0257, 15-0258
2015/03/04
METHYL
ETHYL
KETONE
14.590 mg/m3 2352.3 mg/m3
Navy 8 hr TWA
(METHYL ETHYL
KETONE)
590.0 mg/m3
15-0449, 15-0450, 15-0451
2015/06/13 CHROMIUM(VI)
0.012329 mg/m3
0.012534 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0445, 15-0446, 15-0447
2015/06/13 CHROMIUM(VI)
0.0015212 mg/m3
0.0015489 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0441, 15-0442, 15-0443
2015/06/13 CADMIUM
0.00028617 mg/m3
0.00072509 mg/m3
OSHA 8 hr TWA
(CADMIUM AND
COMPOUNDS AS CD
TOTAL)
0.0050 mg/m3
15-0441, 15-0442, 15-0443 2015/06/13
CHROMIUM
METAL
(PRODUCTION)
0.0081888 mg/m3
0.020562 mg/m3
OSHA 8 hr TWA
(CHROMIUM(II)
COMPOUNDS, AS CR)
0.5 mg/m3
15-0441, 15-0442, 15-0443
2015/06/13 LEAD
0.0021449 mg/m3
0.0045655 mg/m3
OSHA 8 hr TWA
(LEAD AND
0.05 mg/m3
INORGANIC
COMPOUNDS AS PB)
15-0437, 15-0438, 15-0439 2015/06/13
VITREOUS
FIBERS
(FIBERS)
1.8315 mg/m3 1.9264 mg/m3
Navy 8 hr TWA
(SYNTHETIC FIBER
GLASS DUST (AS
TOTAL DUST)) Total
10.0 mg/m3
15-0585 2015/09/18 CHROMIUM(VI)
0.0037604 mg/m3
0.0038427 mg/m3
OSHA 8 hr TWA
(CHROMIUM(VI)
COMPOUNDS, AS CR)
0.0050 mg/m3
15-0583 2015/09/18 CADMIUM
0.000035355 mg/m3
0.0082604 mg/m3
Navy 8 hr TWA
(CADMIUM AND
COMPOUNDS AS CD
TOTAL)
0.0050 mg/m3
15-0583 2015/09/18 LEAD
0.00073657 mg/m3
0.082987 mg/m3
Navy 8 hr TWA (LEAD
AND INORGANIC
COMPOUNDS AS PB)
0.05 mg/m3
15-0583 2015/09/18
CHROMIUM
METAL
(PRODUCTION)
0.00073657 mg/m3
0.82324 mg/m3
Navy 8 hr TWA
(CHROMIUM (II)
AND/OR (III)
SOLUBLE SALTS (AS
CR))
0.5 mg/m3
Table 2
Air Sample Summary - Exposure Monitoring
Past EM Results
Date Work
Center
Process / Task Stressor Sample #’s Concentration Results mg/m
TWA
mg/m
OEL
1/15/14 83500 Metal Spray Ventilation Filter Change out Arsenic 14-
0246/0247
<.003/ <.003 .00144 0.01
1/15/14 83500 Metal Spray Ventilation Cadmium 14-
0246/0247
<.00016/ <.000015 .00007 .005
1/15/14 83500 Metal Spray Ventilation Chromium 14-
0246/0247
.008/ <.003 .0033 1.00
1/15/14 83500 Metal Spray Ventilation Cobalt 14-
0246/0247
.0168/ <.003 .0062 .05
1/15/14 83500 Metal Spray Ventilation Copper 14-
0246/0247
.004/ <.003 .0020 1.00
1/15/14 83500 Metal Spray Ventilation Iron 14-
0246/0247
<.0162/ <.0148 .0074 1.00
1/15/14 83500 Metal Spray Ventilation Lead 14-
0246/0247
<.003/ <.003 .0014 .050
1/15/14 83500 Metal Spray Ventilation Manganese 14-
0246/0247
<.003/ <.003 .0014 .100
1/15/14 83500 Metal Spray Ventilation Molybdenum 14-
0246/0247
.0357/ <.003 .0123 5.00
1/15/14 83500 Metal Spray Ventilation Nickel 14-
0246/0247
.484/ .0144 .1614 1.00
1/15/14 83500 Metal Spray Ventilation Strontium 14-
0246/0247
.0003/ <.0001 .0001 N/A
1/15/14 83500 Metal Spray Ventilation Vanadium 14-
0246/0247
<.003/ <.003 .0014 N/A
1/15/14 83500 Metal Spray Ventilation Zinc 14-
0246/0247
.0116/ <.003 .0045 N/A
1/15/14 83500 Metal Spray Ventilation Filter Change out Hexavalent
Chromium
(CrVI)
14-
0240/0241
<.00024/<.00022 .0001 0.05
Center
Process / Task Stressor Sample #’s…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .