The file's text, extracted by GovTribe without its formatting.
THE ITEMS SHOWN IN THIS ATTACHMENT A – SPECIFICATIONS:
1.1 1.2
1.3 1.4
1.5
IDENTIFIES MOST COMMONLY USED SERVICE AWARDS.
DIMENSIONS PROVIDED ARE TO GIVE A ROUGH ESTIMATE OF THE TYPE AND SIZE OF SERVICE AWARDS.
PHOTOS ARE TO GIVE AN EXAMPLE OF THE TYPE OF SERVICE AWARDS.
TYPE AND QUANTITY OF SERVICE AWARDS WILL BE DETERMINED ON A PER-JOB BASIS.
QUANTITIES AND FREQUENCY OF ITEMS TO BE PURCHASED CANNOT REASONABLY BE IDENTIFIED AND WILL BE DETERMINED AND FINALIZED AT THE TIME OF ORDER.
ATTACHMENT A
SERVICE AWARDS SPECIFICATIONS
FOR INFORMATIONAL PURPOSES ONLY
TABLE OF CONTENTS
| SECTION 1 SERVICE LABEL PINS | 3 | |
| 1.1 | Service Lapel Pins - ½ inch Soft Enamel Service Lapel Pins | 4 |
| 1.2 | Service Lapel Pins - 5/8 Inch Soft Enamel Service Lapel Pins for 5 Years of Service | 5 |
| 1.3 | Service Lapel Pins - 5/8” inch Soft enamel Service Lapel Pins for 10 Years of Service | 6 |
| 1.4 | Service Lapel Pins - ¾ inch Cloisonné Lapel Pins for 15 through 40 Years of Service | 6 |
| 1.5 | Service Lapel Pins - ¾ inch Cloisonné Filled for Retirement | 8 |
| SECTION 2– AUSTIN POLICE DEPARTMENT SERVICE MEDALS AND RIBBONS | 9 | |
| 2.1 | Distinguished Command Medal & Ribbon Specifications | 10 |
| 2.2 | Honorable Conduct Medal & Ribbon | 11 |
| 2.3 | Life Saving Medal & Ribbon | 12 |
| 2.4 | Medal of Valor & Ribbon | 13 |
| 2.5 | Purple Heart Medal & Ribbon | 14 |
| 2.6 | Superior Service Medal & Ribbon | 15 |
| 2.7 | Meritorious Unit Citation Medal & Ribbon | 16 |
| 2.8 | Meritorious Service Medal & Ribbon | 17 |
| 2.9 | Unit of the Year Medal & Ribbon | 18 |
| 2.10 | Presentation Set and Packaging | 19 |
| 2.11 | Pin Backing Specification | 20 |
| SECTION 3 - PARKS AND RECREATION DEPARTMENT | 21 | |
| 3.1 | Centralized Programs Awards- Flag Football | 22 |
| 3.2 | Centralized Programs Awards- Plaques | 23 |
| 3.3 | Community Recreation Center Awards- Medals | 24 |
| 3.4 | Community Recreation Center Awards- Ribbons | 25 |
| SECTION 4 - AUSTIN FIRE DEPARTMENT | 27 | |
| 4.1 | Cadet Training | 28 |
| 4.2 | Firefighter of the Year/Civilian of the Year/Staff Member of the Year Trophy | 29 |
| 4.3 | Watch – Men's | 30 |
| 4.4 | AFD Service Pins | 31 |
| 4.5 | AFD Pin | 32 |
| 4.6 | Watch, Women’s Style5 | 33 |
| 4.7 | Fire Officer of the Year Award | 34 |
SECTION 1 SERVICE LABEL PINS
Service Lapel Pins - ½ inch Soft Enamel Service Lapel Pins
½” Soft enamel SERVICE LAPEL PINS
SPECIFICATIONS
| CSLP-1.1.1 |
| Brass materials with electrostatic soft enamel color filled. |
| CSLP-1.1.2 |
| Military squeeze clutch with a nail and spur back. |
| CSLP-1.1.3 |
| Lettering and borders are dye struck. |
| CSLP-1.1.4 |
| Soft enamel Service Lapel Pins are ½” in size. |
| CSLP-1.1.5 |
| The ½” Service Lapel Pins are to be boxed in a 1¼” x 1¼” inch plastic display box with a see-through top and foam insert. |
| CSLP-1.1.6 |
| This standard establishes the minimum design and performance criteria and test methods for Service Lapel Pins. |
| CSLP-1.1.7 |
| This specification, until revised or rescinded, shall apply to each future purchase and contract for the ½” Service Lapel Pins. Retain for future reference. |
Service Lapel Pins - 5/8 Inch Soft Enamel Service Lapel Pins for 5 Years of Service
5/8 INCH Soft enamel SERVICE LAPEL PINS
5 YEARS OF SERVICE SPECIFICATIONS
| CSLP-1.2.1 |
| Brass material with soft enamel color filled. |
| CSLP-1.2.2 |
| A military squeeze cloth with a nail and spur back. |
| CSLP-1.2.3 |
| Lettering and borders are dye struck |
| CSLP-1.2.4 |
| Soft enamel Service Lapel Pins are 5/8” in size |
| CSLP-1.2.5 |
| The 5/8” Service Lapel Pins are to be boxed in a 1¼” x 1¼” plastic display box with see through top and foam insert. |
| CSLP-1.2.6 |
| This standard establishes the minimum design and performance criteria and test methods for Service lapel pins. |
| CSLP-1.2.7 |
| This specification, until revised or rescinded, shall apply to each future purchase and contract for the 5/8” Service Lapel Pins. Retain for future reference |
Service Lapel Pins - 5/8” inch Soft enamel Service Lapel Pins for 10 Years of Service
5/8” Soft enamel SERVICE LAPEL PINS
10 YEARS SPECIFICATIONS
| CSLP-1.3.1 |
| Brass material with soft enamel color filled. |
| CSLP-1.3.2 |
| A military squeeze cloth with a nail and spur back. |
| CSLP-1.3.3 |
| Lettering and borders are dye struck. |
| CSLP-1.3.4 |
| Service Lapel Pins are 5/8” in size. |
| CSLP-1.3.5 |
| The 5/8” Service Lapel Pins are to be boxed in a 1¼” x 1¼” plastic display box with |
see through top and foam insert.
| CSLP-1.3.6 |
| This standard establishes the minimum design and performance criteria and test methods for |
Service lapel pins.
| CSLP-1.3.7 |
| This specification, until revised or rescinded, shall apply to each future purchase and contract |
for the 5/8” Service Lapel Pins. Retain for future reference.
Service Lapel Pins - ¾ inch Cloisonné Lapel Pins for 15 through 40 Years of Service
¾ INCH Cloisonné SERVICE LAPEL PINS 15 THROUGH 40 YEARS OF SERVICE
| GFSLP-1.4.1 |
| C color filling. |
| GFSLP-1.4.2 |
| A deluxe ball type tie tack with a nail and spur back. |
| GFSLP-1.4.3 |
| Lettering and borders are dye struck. |
| GFSLP-1.4.4 |
| Service Lapel Pins are 3/4” in size. |
| GFSLP-1.4.5 |
| The 3/4” Service Lapel Pins are to be boxed in a 1¼” x 1¼” plastic display box with see |
through top and foam insert
| GFSLP-1.4.6 |
| This standard establishes the minimum design and performance criteria and test methods |
for Service Lapel Pins.
| GFSLP-1.4.8 |
| This specification, until revised or rescinded, shall apply to each future purchase and |
contract for the 3/4” Service Lapel Pins. Retain for future reference.
Service Lapel Pins - ¾ inch Cloisonné Filled for Retirement
3/4 INCH GOLD FILLED RETIREMENT
| RET-1.5.1 |
| Cloisonné color filling. |
| RET-1.5.2 |
| A deluxe ball type tie tack with nail and spur black back. |
| RET-1.5.3 |
| Lettering and borders are dye struck. |
| RET-1.5.4 |
| Retirement Service Lapel pins are ¾” in size. |
| RET-1.5.5 |
| The ¾” Service Lapel Pins are to be boxed in a 1¼” x 1¼” display box with |
a see through top and foam insert.
| RET-1.5.6 |
| This standard establishes the minimum design and performance criteria and test methods for |
Retirement Service Lapel Pins.
| RET-1.5.7 |
| This specification, until revised or rescinded, shall apply to each future purchase and contract for |
the ¾” cloisonné Retirement Service Lapel Pins. Retain for future reference.
SECTION 2– AUSTIN POLICE DEPARTMENT SERVICE MEDALS AND RIBBONS
Distinguished Command Medal & Ribbon Specifications
DISTINGUISHED COMMAND MEDAL & RIBBON
Specifications
| APD-2.1.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD -2.1.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD -2.1.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD -2.1.4 |
| Ribbon Colors: Centered will be a gold stripe measuring approximately ½’’ wide. There will be a light blue stripe measuring approximately 7/16’’ on either side. |
Ribbon Drape
a. Color: Light blue and gold. Centered will be a gold stripe measuring approximately ½’’ wide. There will be a light blue stripe measuring approximately 7/16’’ on either side.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A gold ring will be attached to the tapered bottom. Suspended from the gold ring will be a gold metal medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Gold metal
b. Design: The medallion shall be round with olive branches encircling a white circle measuring approximately 1’’ wide and 1’’ long. Suspended above the gold ring shall be an eagle with wings spread perched above three arrows pointed to the left.
c. In the white circle shall be the words “AUSTIN POLICE” in gold lettering on a black banner on top of the circle and the words “DISTINGUISHED COMMAND” in gold lettering on a black banner on bottom of the circle. A gold five pointed raised star shall be placed in the center of the white circle.
Honorable Conduct Medal & Ribbon
HONORABLE CONDUCT MEDAL & RIBBON
| APD -2.2.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD -2.2.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD -2.2.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD -2.2.4 |
| Ribbon Colors: Approximately 1/8’’ Forrest Green, 1/4’’ Red, 1/4’’ Forrest Green, 1/8’’ Red, 1/4’’ Forrest Green, 1/4’’ Red, and 1/8’’ Forrest Green. |
Ribbon Drape
a. Color: Forrest Green and Red. Approximately 1/8’’ Forrest Green, 1/4’’ Red, 1/4’’ Forrest Green, 1/8’’ Red, 1/4’’ Forrest Green, 1/4’’ Red, and 1/8’’ Forrest Green. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A bronze ring will be attached to the tapered bottom. Suspended from the bronze ring will be a bronze metal medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Bronze metal
b. Design: The medallion shall be round with the words “AUSTIN POLICE” at the top and “HONORABLE CONDUCT” at the bottom. Within a 1’’ wide and 1’’ high circle olive branches shall encompass a replica of the Austin Police Department badge at the bottom.
Life Saving Medal & Ribbon
LIFE SAVING MEDAL & RIBBON
| APD-2.3.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.3.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.3.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.3.4 |
| Ribbon Colors: Centered will be a white stripe measuring approximately 7/16’’ wide. There will be a red stripe measuring approximately 7/16’’ on either side. |
Ribbon Drape
a. Color: Red and White. Centered will be a white stripe measuring approximately 7/16’’ wide. There will be a red stripe measuring approximately 7/16’’ on either side.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A gold ring will be attached to the tapered bottom.
Suspended from the gold ring will be a gold metal medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Gold metal
b. Design: The medallion shall be round with the words “AUSTIN POLICE” in black lettering on top and the words “FOR A LIFE SAVED” in black lettering on bottom encircling a white circle measuring approximately 1’’ wide and 1’’ long.
c. In the white circle shall be a red cross measuring approximately ¾’’ wide by ¾’’ long and outlined in gold.
Medal of Valor & Ribbon
MEDAL OF VALOR & RIBBON
| APD-2.4.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.4.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.4.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.4.4 |
| Ribbon Colors: approximately ¼’’ navy blue, ¼’’ white, 9/16’’ navy blue, ¼’’ white and |
¼’’ navy blue.
| APD-2.4.5 |
| Medal Ribbon Drape: |
a. Color: Navy blue and white. Approximately ¼’’ navy blue, ¼’’ white, 9/16’’ navy blue, ¼’’ white and ¼’’ navy blue.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A gold ring will be attached to the tapered bottom. Suspended from the gold ring will be a gold plated metal medallion pentagon- shaped plate measuring approximately 1 3/8’’ in diameter.
a. Color: Gold plated metal
b. Design: The medallion shall be a pentagon-shaped plate. Within the plate will be a five pointed raised star with points extending beyond the edges of the plate. Centered within the five point star will be a circle with the words “MEDAL OF VALOR” on top. Within the first circle will be a second, smaller raised star and within the circle will have the words “AUSTIN” on a gold banner on top and “POLICE” on a gold banner on the bottom.
Purple Heart Medal & Ribbon
PURPLE HEART MEDAL & RIBBON
| APD-2.5.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.5.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.5.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.5.4 |
| Ribbon Colors: approximately ¼’’ purple, ¼’’ white, 9/16’’ purple, ¼’’ white and ¼’’ purple. |
| APD-2.5.5 |
| Medal Ribbon Drape |
a. Color: Purple and white. Approximately ¼’’ purple, ¼’’ white, 9/16’’ purple, ¼’’ white and ¼’’ purple.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A gold ring will be attached to the tapered bottom. Suspended from the gold ring will be a gold plated heart-shaped medallion measuring approximately 1 3/8’’ in diameter.
| APD-2.5.6 |
| a. Design: The medallion shall be heart-shaped with a dark purple heart measuring approximately 1’’ wide and 1’’ long. Suspended above the gold ring shall be a five pointed raised star perched on a shield shaped figure. |
b. In the dark Purple Heart shall be a replica of the Austin Police Department badge in gold.
Superior Service Medal & Ribbon
SUPERIOR SERVICE MEDAL & RIBBON
| APD-2.6.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.6.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.6.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.6.4 |
| Ribbon Colors: Approximately ¼’’ red, ¼’’ navy blue, 9/16’’ red, ¼’’ navy blue and ¼’’ red. |
Ribbon Drape
a. Color: Red and navy blue. Approximately ¼’’ red, ¼’’ navy blue, 9/16’’ red, ¼’’ navy blue and ¼’’ red.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A bronze ring will be attached to the tapered bottom. Suspended from the bronze ring will be a gold metal medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Bronze metal
b. Design: The medallion shall be round with the words “AUSTIN POLICE” at the top and “SUPERIOR SERVICE” at the bottom. Within a 1’’ wide and 1’’ high circle interlocking olive branches shall encompass a replica of the Austin Police Department badge at the bottom.
Meritorious Unit Citation Medal & Ribbon
MERITORIOUS UNIT CITATION MEDAL & RIBBON
| APD-2.7.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.7.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.7.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.7.4 |
| Ribbon Colors: Approximately 1/8’’ Yellow, 1/4’’ Light Blue, 3/8’’ White, 1/4’’ Light Blue, and 1/8’’ Yellow. |
Ribbon Drape
a. Color: Yellow, Light Blue and White. Approximately 1/8’’ Yellow, 1/4’’ Light Blue, 3/8’’ White, 1/4’’ Light Blue, and 1/8’’ Yellow.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A silver ring will be attached to the tapered bottom. Suspended from the silver ring will be a silver metal medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Silver metal
b. Design: The medallion shall be round with the words “MERITORIOUS UNIT CITATION” around the top and “AUSTIN POLICE” stacked at the bottom. Within a 1’’ wide and 1’’ high circle interlocking olive branches shall encompass a replica of the Austin Police Department badge at the bottom.
Meritorious Service Medal & Ribbon
MERITORIOUS SERVICE MEDAL & RIBBON
| APD -2.8.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD -2.8.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD -2.8.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD -2.8.4 |
| Ribbon Colors: Approximately 3/16’’ blue, 1/8’’ red, 5/16’’ White, 1/8’’ red, and 3/16’’ blue. |
Ribbon Drape
a. Color: Blue, Red and White. Approximately 3/16’’ blue, 1/8’’ red, 5/16’’ White, 1/8’’ red, and 3/16’’ blue.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A silver ring will be attached to the tapered bottom. Suspended from the silver ring will be a silver metal star-shaped medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Silver star-shaped metal
b. Design: The medallion will be a five-pointed star with a circle in the middle measuring ½’’ in diameter with the words “AUSTIN POLICE” around the top and “FOR MERIT” at the bottom. A replica of the Austin Police Department badge will be in the middle of the circle.
Unit of the Year Medal & Ribbon
UNIT OF THE YEAR MEDAL & RIBBON
| APD-2.9.1 |
| Ribbon Measurement: Approximately 1 3/8’’ wide by 3/8’’ long |
| APD-2.9.2 |
| Ribbon Material: Nylon and Dacron composition “campaign” ribbon material |
| APD-2.9.3 |
| Ribbon Clasp: Affixed to the center of the ribbon shall be a pin with a closing hasp the same width as the ribbon. |
The pin and closing hasp shall be attached to the ribbon in such a way as to not be visible from the front.
| APD-2.9.4 |
| Ribbon Colors: Approximately 3/16’’ light blue, 3/8’’ yellow, 1/8’’ red, 1/8’’ yellow, 1/8’’ light blue, 1/8’’ yellow, 1/8’’ red, 3/8’’ yellow, and 3/16’’ light blue. |
Ribbon Drape
a. Color: Light blue, yellow, and red. Approximately 3/16’’ light blue, 3/8’’ yellow, 1/8’’ red, 1/8’’ yellow, 1/8’’ light blue, 1/8’’ yellow, 1/8’’ red, 3/8’’ yellow, and 3/16’’ light blue.
b. Design: Ribbon measuring approximately 1 3/8’’ long by 1 3/8’’ wide will be folded and tapered at the bottom. A gold ring will be attached to the tapered bottom. Suspended from the gold ring will be a gold metal octagon-shaped medallion measuring approximately 1 3/8’’ in diameter.
a. Color: Gold metal
b. Design: The medallion shall be octagon-shaped with black background surrounding a light blue circle measuring approximately 1’’ wide and 1’’ long.
c. In the black background shall be the words “AUSTIN POLICE DEPARTMENT” in gold lettering on the top of the octagon and the words “UNIT OF THE YEAR” in gold lettering on the bottom of the octagon. A gold five pointed raised star shall be placed in the center of the white circle.
d. Within the 1’’ wide and 1’’ high light blue circle will be interlocking olive branches encompassing a replica of the Austin Police Department badge at the bottom.
Presentation Set and Packaging
Presentation Set and Packaging
| APD-2.10.1 |
| Each medal and ribbon shall be delivered in a display box complete with 2 piece insert when the ribbon and corresponding medal shall be mounted. |
| APD-2.10.2 |
| Packaging shall be conducted in a way as to minimize damage to the ribbon and medal while in transit. |
| APD-2.10.3 |
| Presentation set shall be individually packaged in a cardboard box similar to the one shown in the corresponding image. |
| APD-2.10.4 |
| Presentation box shall measure approximately 7’’ long by 4’’ wide. |
| APD-2.10.5 |
| Presentation box shall include the words “AUSTIN POLICE DEPARTMENT” in gold lettering on the top of the box. |
Pin Backing Specification
Pin Backing Specification
| APD-2.11.1 |
| The pin backing for all ribbons shall have the ability to be fully removed. This shall allow the ribbon to slide onto a display bar as shown in the below images. |
SECTION 3 - PARKS AND RECREATION DEPARTMENT
1.0 2.0 3.0
Centralized Programs Awards- Flag Football
FLAG FOOTBALL TROPHY SPECIFICATIONS
| PARD-3.1.1 |
| FFT-4.8.1 Trophy 10 in. Resin Football trophy with 2.81”W X 4.05”H engraving plate; Engravement details: |
Line1: Austin Parks & Recreation Department or PARD LOGO Line 2: Season/League Name #YEAR# Line 3: Champion
| PARD-3.1.2 |
| All specifications finalized at time of order. |
Centralized Programs Awards- Plaques
CENTRALIZED PROGRAMS- PLAQUE SPECIFICATIONS
| PARD-3.2.1 |
| PLAQUES (8”X10”), Softball |
| PARD-3.2.2 |
| PLAQUES (8”X10”), Basketball |
| PARD-3.2.3 |
| PLAQUES (8”X10”), Volleyball |
| PARD-4.5.4 |
| All specifications are finalized at time of order. |
Community Recreation Center Awards- Medals
COMMUNITY RECREATION CENTER AWARDS- MEDALS SPECIFICATIONS
| PARD-3.3.1 |
| Assorted Metal Medals, various imprints, 1.75 in, double-sided, with ribbon chain |
| PARD-3.3.2 |
| Assorted Metal Medals, various imprints, 2.0 in, double-sided, with ribbon chain |
| PARD-3.3.3 |
| 2" Glow in the Dark Medal |
w/Sports Cheer Ribbon (Black Background White and Pink) – not shown
| PARD-3.3.4 |
| Customized printed ribbons |
| PARD-3.3.5 |
| Coin may include engraving |
| PARD-3.3.6 |
| All specifications finalized at time of order. |
Community Recreation Center Awards- Ribbons
COMMUNITY RECREATION CENTER AWARDS- RIBBONS SPECIFICATIONS
| PARD-3.4.1 |
| Single strand ribbon, varying colors, printed |
| PARD-3.4.2 |
| Double strand ribbon, center rosette, varying colors, printed |
| PARD-3.4.3 |
| Triple strand ribbon, center rosette, varying colors, printed |
| PARD-3.4.4 |
| Award Sash with rosette and ribbons |
| PARD-3.4.5 |
| All specifications finalized at time of order |
2.1 Community Recreation Center Awards- Trophies
COMMUNITY RECREATION CENTER AWARDS- TROPHIES SPECIFICATIONS
| PARD-3.5.1 |
| Trophy, single cup on marble base, varying height of figurine and base, plaque with engraving |
| PARD-3.5.2 |
| Trophy, single cup, elevated metallic column, marble base, varying height, plaque with engraving |
| PARD-3.5.3 |
| Trophy, single cup on colored column with varying placement figurine on marble base, plaque with engraving |
| PARD-3.5.4 |
| Trophy, single cup, two-tiered, three colored columns with two eagles and one-star figurine on marble base with center platform, plaque with engraving |
| PARD-3.5.5 |
| All specifications finalized at time of order. |
SECTION 4 - AUSTIN FIRE DEPARTMENT
4.0 Cadet Training
CADET TRAINING
| AFD-4.1.1 |
| Wood Plaques Wood Finish 7x9 Plaque black plate, gold mat under (black plate has notched corners) Fire Department Logo 9 lines laser engraving |
| AFD-4.1.2 |
| All specifications finalized at time of order. |
Firefighter of the Year/Civilian of the Year/Staff Member of the Year Trophy FIREFIGHTER OF THE YEAR/CIVILIAN OF THE YEAR/ STAFF MEMBER OF THE YEAR AWARD SPECIFICATIONS
| AFD-4.2.1 |
| Firefighter of the Year |
Civilian of the Year Staff Member of the Year Fire Department Logo – acrylic 5” x 8” With wood base 2 lines laser engraved
| AFD-4.2.2 |
| All specifications finalized at time of order. |
Watch – Men's
WATCH SPECIFICATIONS
Men’s Dress Watch, 44MM Smoke Stainless Steel Case with Smoke SS Band, Gray Dial and Quartz, 3 Hand Movement with full color AFD logo
FS5459 THE MIMALIST, SMOKE STAINLESS STEEL, FOSSIL
| AFD-4.3.2 |
| All specifications finalized at time of order. |
AFD Service Pins
AFD SERVICE PINS SPECIFICATIONS
| AFD-4.4.1 |
| .865” Custom Cloisonné Lapel Pins with (1) 8mm Post and Military Clutch packaged in Individual Poly Bags |
AFD logo and years of service Polished silver or gold metal Sandblasted silver or gold White, Black, 430 gray, 186 red, 280 blue Silk screen: White and black
| AFD-4.4.2 |
| Silver Outline – 5 years |
| AFD-4.4.3 |
| Silver Outline – 10 years |
| AFD-4.4.4 |
| Silver Outline – 15 years |
| AFD-4.4.5 |
| Silver Outline – 20 years |
| AFD-4.4.6 |
| Silver Outline – 25 years |
| AFD-4.4.7 |
| Silver Outline – 30 years |
| AFD-4.4.8 |
| Silver Outline – 35 years |
| AFD-4.4.9 |
| Silver Outline – Retired |
| AFD-4.4.10 |
| Gold Outline – 5 years |
| AFD-4.4.11 |
| Gold Outline – 10 years |
| AFD-4.4.12 |
| Gold Outline – 15 years |
| AFD-4.4.13 |
| Gold Outline – 20 years |
| AFD-4.4.14 |
| Gold Outline – 25 years |
| AFD-4.4.15 |
| Gold Outline – 30 years |
| AFD-4.4.16 |
| Gold Outline – 35 years |
| AFD-4.4.17 |
| Gold Outline – Retired |
| AFD-4.4.18 |
| All specifications finalized at time of order. |
AFD Pin
AFD PIN SPECIFICATIONS
.865” Custom Cloisonné Lapel Pins with (1) 8mm Post and Military Clutch packaged in Individual Poly Bags.
AFD logo only
Polished silver or gold metal Sandblasted silver or gold White, Black, 430 gray, 186 red, 280 blue.
| AFD-4.5.2 |
| All specifications finalized at time of order. |
Watch, Women’s Style5
WOMEN’S STYLE WATCH SPECIFICATIONS
Women’s Fossil 32mm Scarlette Mini features a sunray dial with Roman numerals at the 12 and six-hour marker, three-hand movement, date movement and a stainless-steel bracelet with full color AFD logo ES4317 Scarlette Three-Hand Date Stainless Steel Watch Fossil
| AFD-4.6.2 |
| All specifications finalized at time of order. |
Fire Officer of the Year Award
FIRE OFFICER OF THE YEAR SPECIFICATIONS
| AFD-4.7.1 |
| Fire Officer of the Year |
2 lines laser engraved
| AFD-4.7.2 |
| All specifications finalized at time of order. |
image1.jpeg image2.png image3.jpeg image4.png image5.jpeg image6.jpeg image7.jpeg image8.jpeg image9.jpeg image10.jpeg image11.jpeg image12.jpeg image13.jpeg image14.jpeg image15.jpeg image16.jpeg image17.jpeg image140.jpeg image18.jpeg image160.jpeg image19.jpeg image20.jpeg image21.png image22.jpeg image23.jpeg image24.png image25.jpeg image24.jpeg image26.jpeg image260.jpeg image27.jpeg image28.jpeg image29.jpeg image30.jpeg image31.jpeg image32.jpeg image33.jpeg image34.jpeg image35.jpeg image280.jpeg image36.png image37.png image38.jpeg image39.jpeg image40.jpeg image340.jpeg image41.png image42.png