G - Structural Steel 7.14.25.pdf
PDF 94 KB Posted
- Solicitation number
- RFP-STAR-250000002762-1
- Issued by
- Wayne County, Michigan
About this file
This document is a Scope Sheet - Bid Form for a Structural Steel trade package for the Universal Academy Cafeteria Addition project located at 4833 Ogden St, Detroit, Michigan 48210. The bid is issued by Cunningham-Limp and dated 7/14/2025, with the project scope covering the supply and installation of structural steel components including columns, joists, beams, metal decking, equipment supports, screens, brick frames, lintels, and opening framing. The bid requires shop drawings signed by a structural engineer registered in Michigan, and encompasses all necessary tools, equipment, scaffolding, lifts, and cranes to complete the steel work.
The bid form requires comprehensive documentation, including compliance with referenced drawings (FA Studio Rev1 Set dated 6/25/2025 and MLP Civil Set dated 7/9/2025), adherence to general requirements, and provision of a standard warranty of one year from substantial project completion. The document is structured for potential bidders to complete with specific line-item responses, including base bid pricing, alternates, bid breakdown, and unit costs. Key requirements include shop priming of all steel, touch-up of welds and connections, coordination with mechanical contractors for openings, and installation of temporary fall protection as needed.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SCOPE SHEET - BID FORM
Trade Package
G Structural Steel
7/14/2025
Universal Acadmey Cafertiria Addition 4833 Ogden St, Detroit, Michigan 48210
* THIS FORM TO BE COMPETED WITH YES / NO ON EACH LINE ITEM AND ACCOMPANIED WITH YOUR STANDARD FORM OF PROPOSAL. Also provide a written proposal covering this scope and any other items necessary to further qualify your bid including voluntary alternates *
Company:
Estimator:
Office phone:
Cell phone:
Email:
Base Bid $
1. PLANS & SPECS: FA Studio Rev1 Set Dated 6/25/2025 & MLP Civil Set Dated 7/9/2025
2. ANTICIPATED SCHEDULE: Per Cunningham-Limp Instruction to Bidders & General Requirements dated 7/14/2025
3. GENERAL REQUIREMENTS: Per Cunningham-Limp Instruction to Bidders & General Requirements dated 7/14/2025
4. SALES TAX - REQUIRED
5. HOISTING - REQUIRED
6. CONTRACTOR STANDARD WARRANTY - ONE YEAR FROM SUBSTANTINAL COMPLETION OF PROJECT
7. EXTENDED WARRANTIES - PER INDIVIDUAL SPEIFICATION SECTION
8. GENERAL REQUIREMENTS PER DIVISION 1 OF PROJECT MANUAL / SPECIFICATON BOOK
9.
TRADE SCOPE:
Structural Steel
The scope of work is presented to clarify certain portions of the work to be performed under the specified bid category and shall be supplied and installed unless noted otherwise. The scope of work is not to be construed as a complete itemization of work included in the bid category, nor does it relieve the subcontractor of its responsibility to deliver a complete job in accordance with plans and specifications.
Include (furnish and install uno):
1. All work performed in accordance with referenced drawings above and all applicable notes, details, & specifications related to this scope of work.
2.
3. Supply and erect all structural steel columns, joist, beams, metal decking, equipment supports, screens, brick frames, lintels, screed angles and opening framing as necessary.
4. Supply all loose masonry lintels, leveling plates, anchor bolts as indicated.
5. Mechanical openings at roof and floor levels shall be coordinated with mechanical contractors.
6. Rooftop screening framing with maximum of 7' vertical span.
7. Contractor to supply all roof sump pans where applicable.
8. Shop drawings signed by a structural engineer registered in the State of Michigan will be required.
9. Contractor shall provide primed lintels unless otherwise noted.
10. Install angle iron frames for roof top equipment. Cut decking as required. Place temporary fall protection in openings.
11. Comply with all plans and specifications.
12. All steel to be shop primed. Touch up welds an connections as required.
13. Provide all tools, equipment, scaffold, lifts, cranes, etc. to facilitate steel work 14.
15.
Exclude / By Others:
1.
2.
3.
TOTAL BID $ -
Alternates: (Inclusive of labor, materials, and OH&P) $ 1.
2.
3.
BID BREAKDOWN: $
1 Structural Steel
Total Bid $ -
UNIT COST(S): (Inclusive of labor, materials, and OH&P) $
HOURLY RATE(S): (inclusive of OH&P) $
GENERAL / TYPICAL SCOPE OF WORK TO INCLUDE:
File details come from the government source that posted it. Updated .