4_Labor Categories_SbASTl.xls
XLS spreadsheet 114 KB Posted
- Attached to
- Small Business Acquisition & Sustainment Tool (SbAST) Federal contract opportunity
- Solicitation number
- fa8530-09-R-22309
About this file
Labor Categories
View the file
Other files for this federal contract opportunity
Show all 37
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SbAST_Labor_Categories_Descript
| # | Labor Area | # | FAST Labor Category | Level | Description |
| 1 | Technicians | LC-1 | Electronic Technician | 1 | Two (2) years of total experience with the testing of electronic equipment. A high school diploma or General Education Diploma (GED) and a technical school degree (electronic/electrical preferred) are required. |
| 2 | Technicians | LC-1 | Electronic Technician | 2 | Six (6) years of total experience with the testing of electronic equipment, of which three (3) years shall be experience in the testing and troubleshooting of electronic subsystems in military systems such as fixed and rotary wing aircraft. A high school diploma or GED and a technical school degree (electronic/electrical preferred) are required. |
| 3 | Technicians | LC-1 | Electronic Technician | 3 | Eight (8) years of experience in a scientific, engineering, or technical field of which five (5) years shall be in direct support of engineering activities/functions. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 4 | Technicians | LC-2 | Electrical Assembler | N/A | Three (3) years of experience in assembling/integrating electronic/electrical components and equipment. Must be certified to perform soldering in accordance with DOD-STD-2000A or equivalent. Must have a high school diploma or GED. |
| 5 | Technicians | LC-3 | Mechanical Technician | 1 | Two (2) years of experience in machine and sheet metal shop practices. A high school diploma or GED and a technical school degree (mechanical preferred) are required. Must have a current Federal Aviation Administration (FAA) airframe license. |
| 6 | Technicians | LC-3 | Mechanical Technician | 2 | Six (6) years of total experience in machine and sheet metal shop practices of which three (3) years shall be related to the fabrication and installation of parts in military systems such as fixed and rotary wing aircraft. A high school diploma or GED and a technical school degree (mechanical preferred) are required. Must have a current FAA airframe license. |
| 7 | Technicians | LC-3 | Mechanical Technician | 3 | Eight (8) years of experience in machine and sheet metal shop practices of which five (5) years shall be related to the fabrication and installation of parts in military systems such as fixed and rotary wing aircraft. A high school diploma or GED and a technical school degree (mechanical preferred) are required. Must have a current FAA airframe license. |
| 8 | Technicians | LC-4 | Engineering Technician | 1 | Two (2) years of experience in a scientific, engineering, or technical field. A high school diploma or GED and a technical school degree in a scientific, engineering, or technical field are required. |
| 9 | Technicians | LC-4 | Engineering Technician | 2 | Six (6) years of experience in a scientific, engineering, or technical field of which three (3) years shall be in direct support of engineering activities/functions. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 10 | Technicians | LC-4 | Engineering Technician | 3 | Eight (8) years of experience in a scientific, engineering, or technical field of which five (5) years shall be in direct support of engineering activities/functions. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 11 | Technicians | LC-5 | Aircraft Avionics Technician | 1 | Must have two (2) years of experience in aircraft electronics installation, troubleshooting and repair. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 12 | Technicians | LC-5 | Aircraft Avionics Technician | 2 | Must have six (6) years of experience in aircraft electronics installation, troubleshooting and repair. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 13 | Technicians | LC-5 | Aircraft Avionics Technician | 3 | Must have eight (8) years of experience in aircraft electronics installation, troubleshooting and repair. A high school diploma or GED and technical school degree in a scientific, engineering, or technical field are required. |
| 14 | Technical Data / Technical Documentation | LC-6 | Supply Technician | N/A | Must have four (4) years of experience in the development of new/improved procedures and instructions for the control and use of engineering data. Must be able to validate need to release data to various manufacturers, R&D companies, etc., with consideration regarding Government rights. Must be able to develop and implement procedures for improved maintenance and protection of classified and proprietary engineering data. Must be able to manage classified data, to include proper marking, downgrading, destruction, and annual review. Must be able to certify reproduction equipment for use in reproducing classified data and assure data is properly protected during reproduction. |
| 15 | Technical Data / Technical Documentation | LC-7 | Computer Resources Manager Specialist | N/A | Must have four (4) years of experience in determining requirements for computer software, equipment, networks, operations, facilities, etc. Must have experience in assisting/guiding program managers, engineers, and technicians with computer resources necessary for storage/retrieval of technical data. |
| 16 | Technical Data / Technical Documentation | LC-8 | Engineering Data Specialist | N/A | Must have four (4) years of experience in establishment and maintenance of records and files of reproduction rights and legal opinions rendered by the Judge Advocate. Must be capable of determining if the Government has obtained reproduction rights to engineering drawings and related data procured by the Government. If Government ownership of reproduction rights are uncertain, duties include determining if circumstances warrant a calculated risk in release of the data. Must have experience in controlling release of engineering data for purposes of competitive bid. |
| 17 | Technical Data / Technical Documentation | LC-9 | Engineering Data Management Specialist | N/A | Must have four (4) years of experience in acquiring and managing Air Force engineering data in accordance with Air Force Instruction 21-403, Acquiring Engineering Data. Must be able to evaluate engineering data for completeness and adequacy of manufacturing specifications and processes. Must be able to develop engineering data management plans, prepare schedule/milestones for data reviews, research technical manuals, identify deficiencies, and provide assistance/guidance to supply specialists and technicians on matters involving engineering data. |
| 18 | Technical Data / Technical Documentation | LC-10 | Configuration Control Technician | N/A | Must have four (4) years of experience involved with the installation and modification of avionics equipment in aircraft. Must have two (2) years of drafting experience. Must be able to prepare blueprints, schematics and drawings of electrical circuits, machined parts, wiring diagrams and schematics from interpreting draft layouts, sketches or other sources. |
| 19 | Technical Data / Technical Documentation | LC-11 | Draftsman / CAD Operator | N/A | A high school diploma or GED and technical school degree are required. Must have at least two (2) years of experience in mechanical and electrical drafting. Must have two (2) years of CAD drafting experience and be capable of preparing drawings of electrical circuits, machined parts, wiring diagrams and schematics from interpreting draft layouts, sketches or other sources. |
| 20 | Technical Data / Technical Documentation | LC-12 | Drafting Technician | N/A | A high school diploma or GED and a technical school degree in engineering drafting are required. A minimum of three (3) years of drafting experience in electrical or mechanical engineering is required. Must be able to prepare/execute drawings of electrical circuits, machined parts, wiring diagrams, schematics, etc., from layouts, sketches or other sources. Knowledge of Military Standards of printed circuits is required. |
| 21 | Technical Data / Technical Documentation | LC-13 | Data Entry Clerk | N/A | Must possess a high school diploma or GED. Must have two (2) years of experience with word-processing and other computerized data entry systems. Filing or archiving experience, preferably in a technical area, is required. |
| 22 | Technical Data / Technical Documentation | LC-14 | Documentation / Technical Writer | N/A | A high school diploma or GED and technical school degree are required. Four (4) years of total experience as a technical writer is required, of which two (2) years shall have been in the preparation of modification work orders and technical manuals (new and/or updates) for military systems. |
| 23 | Technical Data / Technical Documentation | LC-15 | Librarian | N/A | A high school diploma or GED is required. Must have at least two (2) years of experience working in a technical library facility, including experience in storage and retrieval of technical data for military systems. |
| 24 | Mechanical Shops and Aircraft Maintenance | LC-16 | Sheet Metal Mechanic | N/A | Four (4) years of total experience in airframe repair. Ability to fabricate, assemble, and install prototype equipment on a large variety of aircraft, ranging from single-engine airplanes to complex, multi-engine turbojets, and helicopters. Must be familiar with military technical manuals, technical orders, modification work orders and blue prints. Must have ability to install prototype equipment on aircraft and make modifications to the existing airframes. Coordinates with project engineer personnel throughout the project, and provide technical assistance to project engineers, contractors and factory representatives. Must perform sheet metal repairs to a variety of aircraft, possess an in-depth knowledge of sheet metal materials and repair techniques. Must use tools and equipment associated with a sheet metal shop, such as protractors, calipers, pitch gauges, crimping tools/machines, forming machines, gas and heli-arc welding machines, lathes, milling machines, saws and drilling presses. Must be able to read and interpret blueprints, schematics and rudimentary drawings. |
| 25 | Mechanical Shops and Aircraft Maintenance | LC-17 | Aircraft Mechanic | N/A | Four (4) years of direct experience in aircraft maintenance, civilian or military technical school degree, and Airframe & Power Plant (A&P) License. Must be able to perform the full range of airframe and engine maintenance, repair, modifications, inspections and servicing of aircraft in accordance with approved methods, techniques and practices and certify accomplished work. This entails the ability to: troubleshoot engines and systems; use the federal supply system; read and understand technical manuals and schematics; read and interpret all instruments; use special test equipment and tools; research the technical library; perform full system checkouts on all aircraft systems; perform mechanic test flight duties; and perform complete servicing of aircraft. The mechanic may be required to accompany aircraft on project flights away from the work site and perform aircraft maintenance at various locations. |
| 26 | Mechanical Shops and Aircraft Maintenance | LC-18 | Master Machinist | N/A | Must have completed a four (4) year apprenticeship program and have two (2) years as a Journeyman Model/Instrument or a minimum of eight (8) years experience working as a Journeyman Model/Instrument Maker. Must be able to fabricate and construct mechanisms, models and instruments that fulfill engineering requirements for prototype equipment involving mechanical, electro-mechanical, hydraulic, optical and pneumatic principles. Determine necessity for special tools, dies and fixtures required to accomplish intricate machining and assembly operations and set-up and operate Computer Numerical Control (CNC) machines (Machining Center, Lathe and Milling Machine). Knowledge of Computer Aided Machine (CAM) programming is required. |
| 27 | Mechanical Shops and Aircraft Maintenance | LC-19 | Machinist | N/A | Must have completed a four (4) year apprenticeship as a Machinist or a minimum of four (4) years experience working as a Journeyman Machinist. Must be able to set-up and operate the full range of machine tools found in a well-equipped prototype development shop. Must be able to work from engineering design drawings and technical specifications. Must be able to maintain dimensional accuracy, to plus or minus (±) 0.0001 inches, during machining processes, through the use of measuring instruments (e.g. vernier calipers, inside/outside and depth micrometers, gage blocks, surface and height gages, and dial indicators). |
| 28 | Mechanical Shops and Aircraft Maintenance | LC-20 | Sheet Metal Mechanic | N/A | Must have completed a four (4) year apprenticeship program and have two (2) years of experience as a Journeyman sheet metal mechanic or a minimum of eight (8) years experience working as a Journeyman sheet metal mechanic. Must be able to set-up and operate the full range of sheet metal tools found in a well-equipped prototype development shop. Must be able to work from engineering design drawings and technical specifications. Must perform mathematical calculations involving use of plain and solid geometry and principles of measurement. Must work with various thicknesses of aluminum, steel alloys, stainless steel, copper brass and other ferrous and non-ferrous metals. Must form air conditioning and exhaust duct into desired shapes with single and double hem seams, dovetail and lock seams, set-in bottom seams and rolled edges and flanges. Must have ability to makeup transition fittings (round to square, round to round). |
| 29 | Mechanical Shops and Aircraft Maintenance | LC-21 | Flight Line Attendant | N/A | Four (4) years of total experience in maintenance and operation of ground support for flight line equipment. Services aircraft; directs incoming and outgoing aircraft; secures aircraft in parking position with blocks and replenishes fuel; checks for fuel contamination by draining sumps and fuel drains; operates ground support equipment such as electrical power supply and engine starting units; examines tires for specified air pressure and condition; positions and removes boarding platforms to unload or load aircraft passengers; unloads and loads luggage and cargo; cleans exterior and interior of aircraft; de-ice aircraft aerodynamic surfaces; assist aircraft mechanics in repair and maintenance of aircraft; performs maintenance and cleaning of hangar; operates sweeper and scrubber; removes trash and oily rags; grounds aircraft, places drip pans under aircraft and installs aircraft covers on the aircraft. |
| 30 | Mechanical Shops and Aircraft Maintenance | LC-22 | Painter | N/A | Must have two (2) years of experience as a Journeyman Industrial Painter. Must prepare surfaces by sandblasting, sanding, and applying chemical degreasing and etching solutions, metal conditioners and wash primers. Must paint a variety of wood and metal items, primarily by spraying with lacquers and acrylics. Must independently plan details of work, selecting method, equipment and process best suited for a particular requirement. |
| 31 | Mechanical Shops and Aircraft Maintenance | LC-23 | Depainter, Aircraft & Components | N/A | Must have two (2) years of experience in industrial de-painting operations. Must de-paint a variety of aircraft components and metal items using various de-paint techniques, including robotic de-paint technologies, such as plastic media blasting, pressurized water blasting (with and without added media), chemical stripping, and mechanical agitation/removal. De-painting includes removal of various paint / coating systems, sealant, and adhesives. Must independently plan details of work, selecting method, equipment and process best suited for a particular requirement. |
| 32 | Mechanical Shops and Aircraft Maintenance | LC-24 | Tool & Parts Attendant | N/A | Must have two (2) years of experience as a Tool and Parts Attendant or two (2) years of experience in the machine, sheet metal or woodworking trade. Must operate a tool crib that services maintenance personnel by ordering, receiving, storing, issuing and inventorying tools, parts, and stock. Must select, issue tools and equipment, requested by shop personnel, and must accept return of same. Must maintain appropriate records on a "user friendly," menu-driven computer system. Must maintain reorder levels by submitting replenishment requests. |
| 33 | Computer Systems | LC-25 | Computer System Analyst | 1 | Must have experience in the analysis and design of business applications on complex, large-scale systems, including experience in data base management concepts. Knowledge of state-of-the-art storage and retrieval methods is required, as well as the ability to formulate specifications for computer programmers to use in coding, testing, and debugging of computer software. Must be able to develop plans for Automated Data Processing (ADP) systems from project inception to conclusion. Must be able to define the problem and develop system requirements and program specifications, which programmers use to prepare systems documentation programs and tests. Works under immediate supervision. Typically reports to a supervisor or manager. |
| 34 | Computer Systems | LC-25 | Computer System Analyst | 2 | Must have significant experience in the analysis and design of business applications on complex, large-scale systems, including experience in database management concepts. Knowledge of state-of-the-art storage and retrieval methods is required as well as the ability to formulate specifications for computer programmers to use in coding, testing, and debugging of computer programs. Coordinates with the Project Manager to ensure problem solution and user satisfaction. Must be able to make recommendations, as needed, for approval of major systems installations. Works under immediate supervision. Typically reports to a supervisor or manager. |
| 35 | Computer Systems | LC-26 | Computer Scientist | 1 | Must have experience in requirement analysis, design, and coding methodologies; database design approaches; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements. Performs software engineering and programming for large computers, minicomputer and microprocessor based applications. Develops detailed flow charts and associated documentation from general program statements. Codes segments of a program using Machine Operating Language (MOL) or High Order Language (HOL), employing flow charts and associated prose. Analyzes computer programs and identifies refinements to reduce operating time or otherwise improve performance. Works under immediate supervision. Typically reports to a supervisor or manager. |
| 36 | Computer Systems | LC-26 | Computer Scientist | 2 | Performs software engineering and programming for large computers and minicomputer and microprocessor based applications. Performs analyses of system requirements and develops operational software subsystems. Must have significant experience in requirements analysis, design, and coding methodologies; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements. Must have significant experience in real-time operating systems, distributed systems, timing and sizing analysis, performance analysis, database design and management, and resource utilization assessment is essential. Background in machine and assembly languages, MOLs and HOLs, is required. Background in more than one software development environment is preferred. May lead and direct the work of others. Typically reports to a manager or head of a unit/department. |
| 37 | Computer Systems | LC-26 | Computer Scientist | 3 | Performs software engineering and programming for large computers and minicomputer and microprocessor based applications. Performs analyses of system requirements and develops operational software subsystems. Works with minimal supervision. Provides technical direction and guidance to lower level technical personnel as necessary. Must have extensive experience in requirements analysis, design, and coding methodologies; documentation standards; configuration management; DOD software policy; and DOD test and evaluation requirements. Must have extensive experience in real-time operating systems, distributed systems, timing and sizing analysis, performance analysis, data base design and management, and resource utilization assessment is essential. Background in machine and assembly languages, MOLs and HOLs is required, as is background in more than one software development environment. May lead and direct the work of others. Typically reports to a manager or head of a unit/department. |
| 38 | Computer Systems | LC-27 | Database Architect / Manager | N/A | Must have significant experience in database design and management may be substituted for the degree requirement. Experience includes Database Management Systems (DBMS) design and system analysis, current operating systems, software internals and data manipulation techniques and languages. Directs the design of databases to store, secure, select, and retrieve information in a logical, orderly manner. Ensures that designed systems provide sufficient controlled avenues for access to and update of the database. Ensures the currency, accuracy, and integrity of the data. Oversees the design and maintenance of the data dictionary and retrieves transactions to ensure correct implementation and usage of the database. May lead and direct the work of others. Typically reports to a manager or head of a unit/department. |
| 39 | Computer Systems | LC-28 | Database Specialist | N/A | Must have significant experience in design and utilization of database systems may be substituted for the degree requirement Experience includes using current DBMS technologies, application design utilizing various DBMS and experience with DBMS internals. Acts as a project leader in the design and installation of database applications. Ensures appropriate linkages to existing databases and to data processing systems (i.e. business applications). Ensures that adequate recovery procedures are included in all database designs. Directs the training of user groups in the protocols involved in updating and accessing the database. Monitors database transactions to ensure correct usage of the database. Provides technical expertise on the database system to user and data processing personnel. Works under immediate supervision. Typically reports to a supervisor or manager. |
| 40 | Computer Systems | LC-29 | Computer Programmer | N/A | Must have significant experience with MOLs, HOLs, tools, techniques and methodologies used in the development and test of computer programs are required. Works under immediate supervision. Typically reports to a supervisor or manager. |
| 41 | Engineering | LC-30 | Engineer, Quality Assurance | 1 (Entry) | Bachelor of Science in Engineering, Mathematics or Physical Sciences with engineering experience is required. Must have engineering experience, including engineering knowledge of probability, reliability, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. Must have required experience level in the areas of government development and operational testing; other contractor testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports. Must have detailed, working knowledge of MIL-STD-781, and be familiar with requirements of MIL-STD-810, MIL-STD-781 and MIL-STD-785. |
| 42 | Engineering | LC-30 | Engineer, Quality Assurance | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 43 | Engineering | LC-30 | Engineer, Quality Assurance | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 44 | Engineering | LC-31 | Engineer, Reliability and Maintainability | 1 (Entry) | Bachelor of Science in Engineering, Mathematics or Physical Sciences with engineering experience, to include the engineering knowledge of probability, reliability prediction, maintainability analysis, statistical analysis methods, sampling and test and evaluation techniques, data collection and familiarity with applicable regulations and standards. At least two (2) years of experience must have been in the areas of government development and operational testing; other contractor testing to include first article, environmental and performance testing at both component and system levels; preparation, review and analysis of failure reports, verification of corrective actions; requirements validation and their translation and traceability to technical requirements and test specifications; preparation and review of detailed test plans/procedures/reports. |
| 45 | Engineering | LC-31 | Engineer, Reliability and Maintainability | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 46 | Engineering | LC-31 | Engineer, Reliability and Maintainability | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 47 | Engineering | LC-32 | Engineer, Aerospace | 1 (Entry) | A Bachelor of Science in Aerospace or Mechanical Engineering is required. Progressive experience in design and development of engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) perform finite element analysis and modeling; e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel. |
| 48 | Engineering | LC-32 | Engineer, Aerospace | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 49 | Engineering | LC-32 | Engineer, Aerospace | 3 (Senior / Lead Engineer) | A Bachelor of Science in Aerospace or Mechanical Engineering is required. Progressive experience in design and development of engineering projects required. Must have experience and skills necessary to perform the following tasks: a) provide highly technical expertise and guidance in solving complex engineering problems; b) perform in all phases of hardware development, integration / implementation and analysis; c) participate in hardware evaluations; d) perform finite element analysis and modeling; e) develop standards and guidelines for tasks being performed; and, f) interface with government personnel. |
| 50 | Engineering | LC-33 | Engineer, Computer | 1 (Entry) | A Bachelor of Science degree in engineering or computer science is required. Must be thoroughly familiar with UNIX and Windows-based operating systems and be capable of performing system administration and network administration functions to include management of software and hardware maintenance; utilizing contractor services as applicable; backup procedures; problem troubleshooting; user support; system security and other normal administration requirements. Background in CAD and graphics applications is desired and familiarity with networked workstations, servers, storage, printing and plotting devices, and modems communicating with remote sites via telephone line is required. |
| 51 | Engineering | LC-33 | Engineer, Computer | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 52 | Engineering | LC-33 | Engineer, Computer | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 53 | Engineering | LC-34 | Engineer, Computer Systems | 1 (Entry) | A Bachelor of Science degree in engineering or computer science is required. This position requires experience in computer systems or related engineering field. Individual must possess in-depth knowledge of engineering principles, computer hardware and computer software. Must be knowledgeable about all levels of computer integration and use. Must maintain a continuing computer engineering knowledge of state-of-the-art development in hardware and software, their individual characteristics, capabilities, operations, and limitations. Individual must be able to apply engineering principles to acquire, implement, design, develop architectures and maintain integrated computer systems. Must possess the skills necessary to provide engineering support for development of detailed hardware, software, and firmware designs for integrated computer systems. Must be able to establish and direct test and evaluation of existing integrated computer facilities to assess their capability, quality, and effectiveness. Must be able to review the need for new integrated computer equipment and make recommendations for additional equipment to support new, increased or future requirements. |
| Individual must also be able to analyze data for evaluation of operational systems to establish requirements for modification or replacement. | |||||
| 54 | Engineering | LC-34 | Engineer, Computer Systems | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 55 | Engineering | LC-34 | Engineer, Computer Systems | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 56 | Engineering | LC-35 | Engineer, Electrical | 1 (Entry) | Bachelor of Science in Electrical/Electronic Engineering required. Must have progressive experience in complex military electronics microprocessor-based systems, real-time networks, computer graphics, and analog and digital electronics; experience shall include design, development, and integration of complex military electronics; plus experience in supervising design and development of hardware projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware development, integration/implementation, and analysis; 3) participate in hardware evaluations; 4) develop standards and guidelines for tasks being performed; and, 5) interface with government personnel. |
| 57 | Engineering | LC-35 | Engineer, Electrical | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years direct experience in a relevant engineering activity is required. |
| 58 | Engineering | LC-35 | Engineer, Electrical | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years direct experience in a relevant engineering activity is required. |
| 59 | Engineering | LC-36 | Engineer, Electronics | 1 (Entry) | Must have a Bachelor of Science in computer engineering, electronics engineering, electrical engineering or physics. Must have experience in electronic design, integration, and testing of electronics subsystems of military systems such as fixed/rotary wing aircraft. Additionally, experience in one or more of the following disciplines is required: Electronic Warfare; Navigation; Command, Control, and Communications; Avionics; Data and Information Processing, or Design Engineering. Experience must include technical involvement as applicable in one (1) or more of the following areas: exploratory research, design, development, production, testing, engineering studies, analysis of system design, performance enhancement of applicable systems/subsystems. Develops concepts, techniques, and applications that advance the state-of-the-art and contribute to the development of effective system/subsystem designs. Develops technical requirements, based on operational scenarios, across all phases of system development (including concept exploration, design, integration, test, and fielding) for highly complex systems/subsystems. |
| 60 | Engineering | LC-36 | Engineer, Electronics | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 61 | Engineering | LC-36 | Engineer, Electronics | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 62 | Engineering | LC-37 | Engineer, Environmental | 1 (Entry) | A Bachelors in environmental sciences, chemistry, or related field is required. Must have progressive experience in development and management of environmental compliance programs, environmental monitoring and remediation, pollution prevention programs, environmental restoration, and hazardous and non-hazardous materials. Knowledge of and experience with federal, state, and local environmental regulations, including the Resource Conservation and Recovery Act (RCRA), the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA), and the National Environment Protection Act (NEPA) regulations are required. Must have experience in personal protection and safety; government/commercial practices for handling, storage, disposal, and recycling of hazardous materials. |
| 63 | Engineering | LC-37 | Engineer, Environmental | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 64 | Engineering | LC-37 | Engineer, Environmental | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 65 | Engineering | LC-38 | Engineer, Industrial | 1 (Entry) | Bachelor of Science in Industrial Engineering degree required. Must have progressive experience in development, improvement, and integration of industrial processes; two (2) years of supervising development of engineering and information management projects. Must have experience and skills necessary to perform the following: 1) provide technical expertise and guidance in solving complex engineering and information management problems through software assisted process modeling; 2) perform in all phases of process development, integration, implementation, modeling, and analysis; 3) evaluate software/hardware/information systems integration; 4) develop standards and guidelines for tasks being performed; and 5) interface with Government personnel. |
| 66 | Engineering | LC-38 | Engineer, Industrial | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 67 | Engineering | LC-38 | Engineer, Industrial | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 68 | Engineering | LC-39 | Engineer, General | 1 (Entry) | Bachelor of Science in an engineering discipline is required. Must have progressive experience in engineering management of military systems/sub-systems. Proven expertise is required in technology transfer, technology insertion, information systems, system upgrade/replacement, and application of emerging technologies. Must have extensive knowledge of military specifications and standards pertaining to military systems and sub-systems. Must have the capability to manage and integrate complicated sub-systems into higher level systems. Specialized experience is required to demonstrate understanding of engineering project development from inception to deployment and sustainment. Responsible for technical aspects of each project or program. Serves as technical point of contact with client on program activities. Ensures required resources including manpower, production standards, computer time and facilities are available for program implementation. |
| 69 | Engineering | LC-39 | Engineer, General | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 70 | Engineering | LC-39 | Engineer, General | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 71 | Engineering | LC-40 | Engineer, Materials | 1 (Entry) | Bachelor of Science in Materials Science/Mechanical Engineering is required. Must have progressive experience in the design of composites and polymer materials (graphite-graphite, kevlar, tungsten-boron, fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with government personnel. |
| 72 | Engineering | LC-40 | Engineer, Materials | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 73 | Engineering | LC-40 | Engineer, Materials | 3 (Senior / Lead Engineer) | Bachelor of Science in Materials Science/Mechanical Engineering is required. Must have progressive experience in the design of composites and polymer materials (graphite-graphite, kevlar, tungsten-boron, fiberglass, aluminum honeycomb, plastics, elastomers, resins, etc.) with the skills necessary to perform the following tasks: 1) provide technical expertise and guidance in solving complex engineering problems; 2) plan, organize, and conduct tests to determine material composition, reaction of materials to different chemicals, and performance of materials under various operational conditions, including corrosion control and prevention, as required; 3) develop nondestructive inspections (NDI) from the classic methods to innovative new methods/technologies; 4) perform in all phases of material development, integration/implementation, and analysis; 5) develop standards and guidelines for tasks being performed; and, 6) interface with Government personnel. |
| 74 | Engineering | LC-41 | Engineer, Mechanical | 1 (Entry) | Bachelor of Science in Mechanical Engineering required. Must have progressive experience in the design, development, and integration of aircraft hydraulic/pneumatic/mechanical systems, with two years of supervising design and development of engineering projects. Must have experience and skills necessary to perform the following tasks: 1) provide highly technical expertise and guidance in solving complex engineering problems; 2) perform in all phases of hardware design, development, integration/implementation, and analysis; 3) plan and conduct engineering feasibility studies for the design improvement modifications and implementation of advanced technologies; 4) develop standards and guidelines for tasks being performed; and, 5) interface with Government personnel. |
| 75 | Engineering | LC-41 | Engineer, Mechanical | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 76 | Engineering | LC-41 | Engineer, Mechanical | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years or direct experience in a relevant engineering activity is required. |
| 77 | Engineering | LC-42 | Engineer, Mechanical, Ground Vehicle | 1 (Entry) | Bachelor of Science in Mechanical Engineering required. Must have progressive engineering experience in the engineering disciplines listed below. Must be able to apply systems engineering principles to the integration of equipment/sub-systems into various ground vehicles. Must have the ability to perform analytical structural analysis (finite element modeling) and analyze results of loading, stresses, temperature, shock and vibration tests in the design of various mechanical components and systems, and incorporating into the design. Must be able to establish EMSEC and EMI/EMC evaluation criteria, conduct testing, and recommend corrective actions. |
| 78 | Engineering | LC-42 | Engineer, Mechanical, Ground Vehicle | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 79 | Engineering | LC-42 | Engineer, Mechanical, Ground Vehicle | 3 (Senior / Lead Engineer) | Bachelor of Science in Mechanical Engineering required. Must have progressive engineering experience in the engineering disciplines listed below. Must be able to apply systems engineering principles to the integration of equipment/sub-systems into various ground vehicles. Must have the ability to perform analytical structural analysis (finite element modeling) and analyze results of loading, stresses, temperature, shock and vibration tests in the design of various mechanical components and systems, and incorporating into the design. Must be able to establish EMSEC and EMI/EMC evaluation criteria, conduct testing, and recommend corrective actions. |
| 80 | Engineering | LC-43 | Engineer, Manufacturing | 1 (Entry) | Bachelor of Science in Mechanical, Industrial, and/or Electrical Engineering required. Must have progressive experience in an industrial/manufacturing environment. Experience should include the full range of manufacturing tasks including planning, understanding of military specifications and certifications, raw material selection and evaluation, engineering change process, design modification, use of CAD, CAM and MRP systems, tooling, manufacturing process development, and lifecycle support considerations. In addition, should have at least two years supervisory experience in a manufacturing and design environment. Must have the skills to; 1) work closely with program management and design engineers in a concurrent engineering environment; 2) contribute manufacturing considerations to design, raw material selection and lead times in advance of entering the manufacturing phase; 3) sign off on completed drawings; 4) evaluate Engineering Change Proposals (ECP) with manufacturing efficiencies in mind; 5) participate in major reviews; and 6) interface with government personnel. |
| 81 | Engineering | LC-43 | Engineer, Manufacturing | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 82 | Engineering | LC-43 | Engineer, Manufacturing | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
| 83 | Engineering | LC-44 | Engineer, Logistics | 1 (Entry) | A Bachelor of Computer Science, Information Systems, Engineering, Business, Logistics or related scientific or technical discipline is required. Must have progressive work experience in designing, developing, testing and managing configuration and logistic management systems designed to provide clients with logistics technology to ensure effective and economical support for manufacturing and servicing of products, systems or equipment. Plans and develops logistics program activities from conceptual stage through life cycle of product. Develops and implements program activities, coordinates efforts of government and contractor personnel, and solves problems in area of logistics to meet mission requirement(s). Compiles data on standardization and interchangeability of parts to expedite logistic activities. Determines logistic support options and requirements arising from location/deployment of weapons systems. |
| 84 | Engineering | LC-44 | Engineer, Logistics | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 85 | Engineering | LC-44 | Engineer, Logistics | 3 (Senior / Lead Engineer) | A Bachelor of Computer Science, Information Systems, Engineering, Business, Logistics or related scientific or technical discipline is required. Must have progressive work experience in designing, developing, testing and managing configuration and logistic management systems designed to provide clients with logistics technology to ensure effective and economical support for manufacturing and servicing of products, systems or equipment. Plans and develops logistics program activities from conceptual stage through life cycle of product. Develops and implements program activities, coordinates efforts of government and contractor personnel, and solves problems in area of logistics to meet mission requirement(s). Compiles data on standardization and interchangeability of parts to expedite logistic activities. Determines logistic support options and requirements arising from location/deployment of weapons systems. |
| 86 | Engineering | LC-45 | Engineer, Software | 1 (Entry) | A Bachelor of Science in Electrical/Electronic Engineering or Computer Science is required. Must have progressive experience in computer simulation, client-server architectures, advanced networking techniques and protocols, data bases (flat-file, relational, and object-oriented), high-order programming languages, and operating systems (e.g., UNIX/ULTRIX, HP-UX, SUN-OS, VAX/VMS, Harris VOS). In addition, must: 1) have experience in design and implementation of advanced networking techniques and protocols, data base management systems, and programming in high order languages (e.g., C, C++, ADA, FORTRAN); 2) have at least two (2) years of supervising software design and development projects; 3) provide highly technical expertise and guidance in solving complex software engineering problems; 4) perform in all phases of software development, integration/implementation, and analysis; 5) participate in hardware/software evaluations; 6) develop standards and guidelines for tasks being performed; 7) interface with government personnel. |
| 87 | Engineering | LC-45 | Engineer, Software | 2 (Journeyman) | Bachelor of Science (Master of Science preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Seven (7) years of direct experience in a relevant engineering activity is required. |
| 88 | Engineering | LC-45 | Engineer, Software | 3 (Senior / Lead Engineer) | Bachelor of Science (Master of Science or Doctorate {Ph.D.} preferred) degree in engineering OR mathematics/physical science degree with an EIT Certificate. Ten (10) years of direct experience in a relevant engineering activity is required. |
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .