Engineering Order.pdf

1. ENGINEERING ORDER NO.

SYMBOL

SYMBOL

SYMBOL

SYMBOL

SYMBOL

SYMBOL

SYMBOL

PHONE

DATE: PAGE OF

(S)

PAGES

4. DWG NO.

14. CORROSION CONT. MON.

15. NDI

16.

17. DWG CHANGED BY

18. CHANGE CHECKED BY

19. EO/DWG RELEASED BY

DWG SIZE DWG SHEET LATEST DWG REV LTR

2. DWG TITLE

20. DESCRIPTION OF CHANGES/REMARKS

AF IMT 3925, 20030819, V1

12. EO PREPARED/REQUESTED BY

13. ENGINEERING APPROVAL

11. DOCUMENTS AFFECTED (TO/TCTO/SPEC/Other)

OTHER COMMENTS

5. NEXT ASSY

ENGINEERING ORDER

8. TYPE OF ENGINEERING ORDER 9. REASONS FOR CHANGE

ADVANCE CHANGE ERROR CORRECTION

DEVIATION AUTHORIZED DESIGN CHANGE

CHANGE NOTICE DRAWING CLARIFICATION

INFORMATION UPDATED DRAWING

6. USED ON

10. DISPOSITION OF SPARES

REWORK

MODIFY

SCRAP

REPLACE

3. DWG CAGE CODE

7. OPR CAGE CODE

DATE

SYMBOL

PHONE

DATE

DATE

DATE

DATE

DATE

DATE

DATE

REPLACES AF FORM 2600, 19940701, WHICH IS OBSOLETE

20120206 1 1

PALLET ASSEMBLY, CARGO - HCU-6/E 98752 7031843

E 1 M

Casey Jones GRVEB 20120206

472-1365

Casey Jones

GRVEB 20120206

472-1365

Laurie Beebe GRVEB

NOTE 20: Change to read, "Gaps in corners between rails shall be fillet sealed with MIL-PRF-81733 Type II or HB Fuller UR 1100."

LIST OF MATERIALS TABLE: Change "AMS-QQ-250/11" to "ASTM B209" to reflect the latter superseding the former.

LIST OF MATERIALS TABLE: Remove flag note 7 on row 6. This note no longer exists.

SECTION D-D: Change thickness tolerances from ".063 +/- .004" and ".080 +/- .004" to ".063 +/- .007" and ".080 +/- .007."

NOTE 10: Change core thickness from "2.070 +.000/-.010" to "2.080 +/- .020."

NOTES 12 and 16: Replace "MIL-PRF-26915" with "SAE AMS-P-38336." No vendors are listed on the associated QPL for MIL-PRF-26915.

ADD NOTE 23 to DETAIL A: "For maintenence and overhaul (M&O) pallets only, rivets may be located between 0.62" and 3.62" from the corner of the pallet skin.The center of the rivet hole shall not be closer to the edge of the skin than 0.25 in., nor farther than 0.75 in when a straight line is drawn perpindicular to a Distance from center of one rivet hole to another shall be a minimum of 0.5 in."