Attachment_20_-_Exhibits.pdf

ATTACHMENT 20

Advanced Range Threat System – Variant 2

(ARTS-V2)

Contract Data Requirements List

5 FEBRUARY 2016

Note:

For General Data Management, Submissions Information

And Explanations

SEE DODM 5010.12-M

5 Feb 2016

1. DATA DISTRIBUTION, CONTROL STATEMENTS

1.1. The following Distribution Statements identified as a requirement on the DD Form 1423 Block 9 shall be affixed to deliverable ARTS-V2 data item document:

1.1.1. DISTRIBUTION STATEMENTS: The following example statements shall be used for ARTS-V2 data delivered per

CDRLs. Contractor may utilize either “Administrative/Operational Use” or “Critical Technology” with the required distribution statement as appropriate.

1.1.1.1. Distribution Statement A: Approved for public release.

1.1.1.2. Distribution Statement B: Distribution authorized to U.S. Government agencies; Administrative/Operational

Use (30 Sep 2015). Other requests for this document shall be referred to the ARTS-V2 Program Office

AFLCMC/HBZCD, Hill AFB, UT.

1.1.1.3. Distribution Statement C: Distribution authorized to U.S. Government agencies and their contractors;

Administrative/Operational Use (30 Sep 2015). Other requests for this document shall be referred to the ARTS-

V2 Program Office AFLCMC/HBZCD, Hill AFB, UT.

1.1.1.4. Distribution Statement D: Distribution authorized to DoD and US DoD contractors only;

Administrative/Operational Use (30 Sep 2015). Other requests for this document shall be referred to the ARTS-

V2 Program Office AFLCMC/HBZCD, Hill AFB, UT.

1.1.1.5. Distribution Statement E: Distribution authorized to DoD Components only; Administrative/Operational Use

(30 Sep 2015). Other requests for this document shall be referred to the ARTS-V2 Program Office

AFLCMC/HBZCD, Hill AFB, UT.

1.1.1.6. Distribution Statement F: Further dissemination only as directed by ARTS-V2 Program Office

AFLCMC/HBZCD, Hill AFB, UT 30 Sep 2015 or higher DoD authority.

1.2. The following Data Control Statements shall be affixed to deliverable ARTS-V2 data item documents:

1.2.1. “DISCLOSURE NOTICE: This information is furnished upon the condition that it will not be released to another nation without the specific authority of the Department of the Air Force of the United States, that it will be used for military purposes only, that individual or corporate rights originating in the information, whether patented or not, will be respected, that the recipient will report promptly to the United States, any known or suspected compromise, and that the information will be provided substantially the same degree of security afforded it by the Department of

Defense of the United States. Also, regardless of any other markings on the document, it will not be downgraded or declassified without written approval of the originating United States agency DoD Directive 5230-24.”

1.2.2. All technical documents which have Distribution Statement F, and as appropriate, D and E, shall be marked

"WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act

(Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App 2401 et seq.) as amended. Violations of these exports laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

1.2.3. For unclassified documents: “DESTRUCTION NOTICE – Destroy by any method that will prevent disclosure of contents or reconstruction of the document.”

1.2.4. For classified documents: “DESTRUCTION NOTICE – Follow the procedures in DoD 5220.22-M, National Industry

Security Program Operating Manual (NISPOM), Section 5-705, or DoD5200.1-R Information Security Program, Chapter VI.”

2. PRICE GROUP

2.1. The following Individual CDRLs Shall be Priced Separately:

CZ01 TM-86-01P ARTS-V2 PRA Technical Manuals

DZ10 DI-SESS-81002F/T Developmental Design Drawings/Models and Associated Lists (DDDM)

JZ01 DI-SESS-81000E/T Product Drawings/Models and Associated Lists

HZ01 TM-86-01P ARTS-V2 Technical Manuals

AJ01 DI-SESS-81000E/T Product Drawings/Models and Associated Lists

2.2. Group I Definition. Data which is not otherwise essential to the Contractors performance of the primary contracted effort

(production, development. testing, and administration) but which is listed on the Data List. Estimated costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data to the Government.

2.3. Group II Definition. That which is essential to the performance of the primary contracted effort but the Contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, and frequency of submission, preparation, control or quality of the data item. Estimated costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

2.4. Group III Definitions. Data which the Contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submission, preparation, control, and quality of the data item. Estimated costs to be included under

Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

2.5. Group IV Definition. Data, which is developed by the Contractor as part of his normal operating procedures and his effort in supplying these data to the Government, is minimal. Estimated costs for Group IV data items should normally be shown as no cost.

3. CDRL INTERPRETATION AND PREPARATION

3.1. The following information shall be used to interpret DD Form 1423-1 CDRL instructions for preparation and delivery of data.

This information may also be used to prepare new CDRLs or revise existing CDRLs.

3.2. Block A Contract Line Item No. If the 1423 is to be used to address multiple CLINs, enter “SEE BLK 16” in Block A and add the CLIN in a CLIN/Exhibit/Data Item/Contract Reference Table in Block 16.

3.3. Block B Exhibit. If the 1423 is to be used to address multiple CLINs, enter “SEE BLK 16” in Block B and add the Exhibit in a CLIN/Exhibit/Data Item/Contract Reference Table in Block 16.

3.4. Block C Category: To be left blank.

3.5. Block D System/ Item: Enter ARTS-V2.

3.6. Block E Contract/PR No.: Blank; government will fill in.

3.7. Block F Contractor: Blank; government will fill in.

3.8. Block 1 Data Item No.: If the 1423 is to be used to address multiple CLINs, enter “SEE BLK 16” in Block 1 and add the Data

Item No in a CLIN/Exhibit/Data Item/Contract Reference Table in Block 16.

3.9. Block 2 Title: Enter title as it appears on data acquisition document cited under Authority (see below).

3.10. Block 3 Subtitle: Enter subtitle of data item for further definition of data (optional entry).

3.11. Block 4 Authority: Enter Data Item Description (DID) number, or equivalent, of Active DIDs. See ASSIST database

(http://quicksearch.dla.mil/).

3.12. Block 5 Contract Reference: Enter all reference(s) to tasking in the Contractor Statement of Work (CSOW); if the 1423 is to be used to address multiple CLINs, enter “SEE BLK 16” in Block 5 and add the Contract Reference in a CLIN/Exhibit/Data

Item/CSOW Reference Paragraph Table in Block 16.

3.13. Block 6 Requiring Office: Enter the Government technical office responsible for ensuring adequacy of the data item.

http://quicksearch.dla.mil/) http://quicksearch.dla.mil/)

3.14. Block 7 DD Form 250 Required: Enter applicable code designating the requirement for inspection and acceptance of the data item, as shown in the following list:

DD Form 250 Code Inspection Acceptance

SS (1) (2)

DD (3) (4)

SD (1) (4)

DS (3) (5)

LT (6) (7)

*NO (8) (8)

XX (9) (9)

(1) Inspection at source.

(2) Acceptance at source.

(3) No inspection performed at source. Final inspection performed at destination.

(4) Acceptance at destination.

(5) Acceptance at source. Acceptance based on written approval from the Contracting Officer.

(6) Letter of transmittal (LT) only. A letter of transmittal is not appropriate when an inspection of the data is required.

The data is sent by the contractor directly to the activities listed in block 14 of the DD Form 1423. The LT is used when the contracting agency requires a record of delivery but does not desire to have a DD Form 250 for every piece of data developed by the contractor. The only other authorized use of the LT is the special case where the contracting agency does not desire to have separate DD Forms 250 but desires to have a Government QA representative perform inspection. The Government QA representative shall be listed on the distribution in block

14 and requested to provide comments via the QA letter of instruction. Also, when the local contract administration office (CAO) is required to perform inspection of a letter of transmittal, block 16 shall so indicate.

In all cases where "LT" is used, a copy of the letter of transmittal should be provided to the CAO for information and appropriate use in administration of the contract.

(7) As specified in block 16 of the DD Form 1423.

(8) No inspection or acceptance required. No DD Form 250 or letter of transmittal required.

(9) Inspection and acceptance requirements specified elsewhere in the contract.

*Use of the symbol NO is not authorized for data comprising TDPs or TMs.

3.15. Block 8 App Code: Specify requirement for Government approval of a draft, preliminary or formal copy before preparation of the final data item. “A” designates Government approval required prior to final submission.

3.16. Block 9 Distribution Statement Required. As required in paragraph 1.1, delivered data shall be marked with appropriate distribution statements.

3.17. Block 10 Frequency: Specify number of times data item is to be delivered. This entry may be written out such as "NLT 30 days after completion of each test or test series", or by use of the following codes with additional clarification in the Remarks section:

NOTE: All days are considered calendar days unless otherwise stated.

3.17.1. ANNLY (Annually)

3.17.2. ASGEN (As generated*)

3.17.3. ASREQ (As required*)

3.17.4. BI-MO (Every 2 months)

3.17.5. BI-WE (Every 2 weeks)

3.17.6. DAILY (Daily)

3.17.7. DFDEL (Deferred delivery)

3.17.8. MTHLY (Monthly)

3.17.9. ONE/P (One preliminary)

3.17.10. ONE/R (One time with revisions)

3.17.11. QRTLY (Quarterly)

3.17.12. R/ASR (Revision as required*)

3.17.13. SEMIA (Every 6 months)

3.17.14. WEKLY (Weekly)

3.17.15. XTIME (Number of times to be submitted, I time, 2 times, 9 times etc.)

* Requires further explanation in Remarks section.

3.18. Block 11 As of Date: Specify as-of-date of data item, when applicable. This date is usually associated with a one-time submission.

3.19. Block 12 Date of First Submission: Specify when first submission is required. This entry may be written out such as 30 days after contract award or by use of the following codes with additional clarification when required in the Remarks section:

3.19.1. ASGEN (As generated*)

3.19.2. ASREQ (As required*)

3.19.3. XXDAC (Days after contract start**)

3.19.4. DFDEL (Deferred Delivery*)

3.19.5. EOC (End of contract)

3.19.6. EOM (End of month)

3.19.7. EOQ (End of quarter)

3.19.8. XDACM (Days after contract modification**)

3.19.9. XDARP (Days after reporting period**)

3.19.10. XDATC (Days after test**)

3.19.11. XDPTT (Days before test**)

3.19.12. XDARC (Days after receipt of comments**)

3.19.13. XDARP (Days after reporting period

3.19.14. XDADO (Days after delivery order)

* Requires further explanation in Remarks section. ** A number must be inserted in place of the ‘X’.

3.20. Block 13 Date of Subsequent Submission: Specify when subsequent submissions are required, when applicable.

3.21. Blocks 14 & 15 Distribution: The following Organizational Cross Reference List shall be used in conjunction with the

CDRLs to determine actual addressees for distribution of data hard copies. The ORG number will be entered in lieu of an address on the CDRL and will be a part of the CDRL package. An asterisk next to the ORG number and a revision date to the list will identify changes to the list.

ORG-1:

AFLCMC/HBZCD

Program Manager BLDG 1285

6057 Box Elder Lane

Hill AFB UT 84056-5811

ORG-2:

AFLCMC/HBZC-EPASS TO ACQ

MGR 102 West D Ave, Bldg. 11 STE

400E Eglin AFB, FL 32542-5414

ORG-3:

AFLCMC/PZZKA

6039 Wardleigh Rd, Bldg. 1206 Hill

AFB UT 84056-5838

ORG-4:

AFLCMC/LZPEM

6020 Gum Lane, Bldg. 1218 Hill

AFB, UT 84056-3438

ORG-5:

406 SCMS/GULAB

6038 Aspen Ave. Bldg. 1289 SW Hill

AFB, UT 84056-3438

406scms.provisioning@us.af.mil

ORG-6:

406 SCMS/GULAA

7973 Utility Drive, Bldg. 1135 Hill

AFB, UT 84056-5306

406SCMS.GULAA.PACK@us.af.mil

ORG-7: DCMA / TBD X

X mailto:406scms.provisioning@us.af.mil mailto:406SCMS.GULAA.PACK@us.af.mil

3.22. Block 16 Remarks: If the 1423 is to be used to address multiple CLINs, displays the Data Item No in a CLIN/Exhibit/Data

Item/Contract Reference Table; provides space to tailor the DID from Block 4 if required; provide further explanation and direction for any other block as needed; in most CDRLs, include the following:

3.22.1. Other Data Shipment Directions: Ref Blk 14: Deliver data and submittal letters to the ARTS-V2 Government PCO by posting to a government approved location. CDRL data will be considered delivered when access by the Government

PCO or PM is confirmed. General notification of delivery will be accomplished via email to the Government PCO and PM with CC list to be established by the PM. Any classified data must be delivered IAW current government guidelines for handling of classified materials.

3.23. Block 17 Price Group: Unused/blank except for the separately priced CDRLs listed in Section 2.1, above. When specifying price group, use definitions in Sections 2.2 through 2.5 of this document.

3.24. Block 18 Estimated Total Price: Unused/blank except for the separately priced CDRLs listed in Section 2.1, above.

3.25. Table 1. "Contract Data Items List (CDRL) to Contract Line Item Number (CLIN) Applications" shows the association between CLINs, contract type, exhibits and CDRLs and is provided for reference only. Table 2. "DD Form 1423 Multi

Use CDRLs to CLIN Applications" shows the relationship between individual CDRLs to other "cross over" CDRLs and is provided for reference only. In the event there are discrepancies between Table 2 and the actual DD Form 1423(s), the DD

Form 1423(s) will take precedence.

4. OTHER DELIVERABLE REQUIREMENTS

4.1. Data delivered within these exhibits shall not be in a scanned bitmap format (e.g., TIFF or jpg) in which alphanumeric content cannot be located with a search command. In addition, all printed or printable data shall be legible.

4.2. All data, technical data, computer software, and computer software documentation delivered or otherwise furnished to the

Government shall be free of computer malware (including viruses and worms).

4.3. The cover page of any document provided with Special License Rights Category A (see Section J Attachment 6 GRIDS, section 4(c)) shall include the legend contained in DFARS 252.227-7013(f)(4) and the following text immediately after the phrase “License No.”: “SLRC-A”.

Table 1. CDRL to CLIN Applications

CLIN CLIN NAME CONTRACT

TYPE

EXHIBIT CDRL No.(s)

0511 Shell Prod Prod - Option FFP AZ AZ01-AZ04

0005 Data NSP BZ / EZ

BZ01- BZ94

EZ01 – EZ38

0006 Technical Orders FFP CZ CZ01

0007 Technical Data Package (TDP) and Drawings FFP DZ DZ01-DZ12

0009 Engineering Change Proposals (ECP) FFP/TBD FZ FZ01

1003 Data – Option Period 1 – (Option) [Production] NSP GZ GZ01-GZ80

1004 Technical Orders – Option Period 1 – (Option) [Production] FFP HZ HZ01

1005 TDP and Drawings – (Option) [Production] FFP JZ JZ01

1006 Logistics Product Data – Option Period 1 – (Option) [Production] FFP KZ KZ01 1007 Engineering Data for Provisioning – Option Period 1 – (Option) [Production] FFP LZ LZ01

1009 ECP – Option Period 1 – (Option) [Production] FFP/TBD MZ MZ01 2003 Data – Option Period 2 – (Option) [Production] NSP NZ NZ01-NZ53 2005 ECP – Option Period 2 – (Option) [Production] FFP/TBD PZ PZ01 3003 Data – Option Period 3 – (Option) [Production] NSP QZ QZ01-QZ53 3005 ECP – Option Period 3 – (Option) [Production] FFP/TBD RZ RZ01 4003 Data – Option Period 4 – (Option) [Production] NSP SZ SZ01-SZ53 4005 ECP – Option Period 4 – (Option) [Production] FFP/TBD TZ TZ01 5002 Data – Option Year 1 – (Option) [ICS] NSP UZ UZ01-UZ38 5004 ECP – Option Year 1 – (Option) [ICS] FFP/TBD VZ VZ01 6002 Data – Option Year 2 – (Option) [ICS] NSP WZ WZ01-WZ38 6004 ECP – Option Year 2 – (Option) [ICS] FFP/TBD XZ XZ01 7002 Data – Option Year 3 – (Option) [ICS] NSP YZ YZ01-YZ38 7004 ECP – Option Year 3 – (Option) [ICS] FFP/TBD ZZ ZZ01 8002 Data – Option Year 4 – (Option) [ICS] NSP AA AA01-AA38 8004 ECP – Option Year 4 – (Option) [ICS] FFP/TBD AB AB01 9002 Data – Option Year 5 – (Option) [ICS] NSP AC AC01-AC38 9004 ECP – Option Year 5 – (Option) [ICS] FFP/TBD AD AD01 0502 PRA Retrofit Data – (Option) NSP AE AE01-AE41 0503 PRA Retrofit ECP - (Option) FFP/TBD AF AF01 0506 ESSS Data - (Option) NSP AG AG01-AG34 0509 Training, Depot Level Data – (Option) FFP AH AH01-AH02 0003 PRA Manufacturing Tooling FFP AJ AJ01

Table 2. DD Form 1423 Multi Use CDRLs to CLIN Applications

CLIN

CLIN

Name

Contract Type

Exhibit

CDRL

DID

Title

Cross Over

Shell Prod

Prod - Option

FFP AZ

AZ01 DI-NDTI-80566A/T Test Plan - Radar Cross Section EZ19, GZ69, NZ23, QZ23, SZ23

AZ02 DI-NDTI-80603A/T Test Procedure - Radar Cross Section EZ20, GZ70, NZ24, QZ24, SZ24

AZ03 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

EZ21, GZ71, NZ25, QZ25, SZ25

AZ04 DI-MGMT-81861A/T

Integrated Program Management Report (IPMR)

BZ06, AE05, AG05, GZ05, NZ05, QZ05,

SZ05, UZ04, WZ04, YZ04, AA04, AC04

0005 Data NSP BZ

BZ01 DI-ADMN-81373/T Presentation Material

GZ01, NZ01, QZ01, SZ01, UZ01, WZ01,

YZ01, AA01, AC01, AE01, AG01

BZ02 DI-ADMN-81250A/T Conference Minutes

GZ02, NZ02, QZ02, SZ02, UZ02, WZ02,

YZ02, AA02, AC02,AE02, AG02

BZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

GZ03, NZ03, QZ03, SZ03, UZ03, WZ03,

YZ03, AA03, AC03, AE03, AG03

BZ04 DI-MGMT-81453A/T Data Accession List (DAL) GZ04, NZ04, QZ04, SZ04, AE04, AG04

BZ05 DI-MGMT-81334D/T Contract Work Breakdown Structure

BZ06 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

AE05, AG05, AZ04, GZ05, NZ05, QZ05,

SZ05, WZ04, YZ04, AA04, AC04, UZ04

BZ07 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

GZ06, NZ06, QZ06, SZ06, UZ05, WZ05,

YZ05, AA05, AC05, AE06, AG06

BZ08 DI-MGMT-81642/T Small Business Subcontracting Report GZ07, NZ07, QZ07, SZ07, AE07, AG07

BZ09 DI-SESS-81785A/T

Systems Engineering Management Plan

(SEMP)

BZ10 RESERVED RESERVED

BZ11 DI-SESS-80858C/T

Supplier’s Configuration Management Plan

BZ12 DI-MGMT-81803/T

Item Unique Identification (IUID) Marking Plan

BZ13 DI-MGMT-81398C/T

Hazardous Materials Management Program (HMMP) Plan

BZ14 DI-MGMT-81808/T Contractor’s Risk Management Plan

BZ15 DI-SAFT-81626/T System Safety Program Plan (SSPP)

BZ16 DI-ENVR-81840/T

Programmatic Environmental Safety and Health Evaluation (PESHE) Plan

BZ17 DI-SESS-80643D/T Specification Change Notice (SCN)

BZ18 DI-MGMT-81889/T Manufacturing Plan

BZ19 DI-TMSS-81819A/T Technical Manual Validation Certificate GZ49

BZ20 DI-MGMT-81797/T Program Management Plan

GZ44, NZ44, QZ44, SZ44, UZ37, WZ37,

YZ37, AA37, AC37, AE35, AG30

BZ21 DI-MISC-80508B/T

Technical Report - Study/Services - Drawing Count

BZ22 DI-MISC-81832/T Counterfeit Prevention Plan

BZ23 DI-SDMP-81748/T Parts Management Plan-PARTS LIST

CLIN

Name

BZ24 DI-TMSS-81818/T Technical Manual Validation Plan

BZ25 DI-MGMT-81717D/T

Information Systems Security (INFOSEC) Anonymity Plan (IAP)

BZ26 DI-ADMN-81306/T

Program Protection Implementation Plan

(PPIP)

BZ27 DI-SESS-81613A/T

Reliability and Maintainability (R&M) Program Plan

BZ28 DI-QCIC-81794/T Quality Assurance Program Plan

BZ29 RESERVED RESERVED

BZ30 RESERVED RESERVED

BZ31 DI-MISC-80508B/T

Technical Report - Study/Services - PRA Site Survey Report

BZ32 DI-SAFT-81563/T Accident/Incident Report

GZ10, NZ10, QZ10, SZ10, UZ07, WZ07,

YZ07, AA07, AC07, AE10, AG10

BZ33 RESERVED RESERVED

BZ34

DI-MGMT-81809/T

Risk Management Status Report

GZ12, NZ12, QZ12, SZ12, UZ09, WZ09,

YZ09, AA09, AC09, AE12, AG12

BZ35 DI-SESS-81628/T

Reliability Development Growth Test Report

GZ14, NZ14, QZ14, SZ14, UZ11, WZ11,

YZ11, AA11, AC11

BZ36 DI-SESS-80567B/T Subsystem Design Analysis Report

BZ37 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

GZ16, NZ16, QZ16, SZ16, UZ12, WZ12,

YZ12, AA12, AC12

BZ38 DI-SAFT-80101C/T

System Safety Hazard Analysis Report

(SSHAR)

AG15, GZ17

BZ39 RESERVED RESERVED

BZ40 DI-MGMT-81804A/T

Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

GZ20, NZ20, QZ20, SZ20, UZ15, WZ15,

YZ15, AA15, AC15, AE18, AG18

BZ41 DI-SESS-81315B/T

Failure Analysis and Corrective Action Report (FACAR)

GZ22, NZ22, QZ22, SZ22, UZ16, WZ16,

YZ16, AA16, AC16, AE19, AG19

BZ42 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

GZ19, NZ19, QZ19, SZ19, UZ14, WZ14,

YZ14, AA14, AC14, AE17, AG17

BZ43 RESERVED RESERVED

BZ44 RESERVED RESERVED

BZ45 RESERVED RESERVED

BZ46 DI-MGMT-81720/T

Validation Completion Report- ORG/DEPOT Operator & Maintenance Technical Manual

GZ26

BZ47 DI-SAFT-82008/T

Radiation Hazard Control Procedures

(RHCP)

BZ48 RESERVED RESERVED

CLIN

Name

BZ49 RESERVED RESERVED

BZ50 RESERVED RESERVED

BZ51 DI-MISC-80508B/T

Training Program Materials (Operations)

GZ21

BZ52 DI-TMSS-81817/T

Technical Manual Quality Assurance (TMQA) Program Plan

BZ53 DI-MISC-80508B/T

Requirements Management Application Report

GZ53, AG09

BZ54 DI-SESS-81757A/T

Design Review Information Package

(DRIP)

GZ28, AG27

BZ55 DI-MGMT-81948/T

Diminishing Manufacturing Sources and Material Shortages (DMSMS) Management Plan

BZ56 DI-SESS-80640D/T Request for Variance (RFV)

GZ29, NZ29, QZ29, SZ29, UZ22, WZ22,

YZ22, AA22, AC22, AE20

BZ57 DI-SESS-80642D/T Notice of Revision (NOR)

GZ30, NZ30, QZ30, SZ30, UZ23, WZ23,

YZ23, AA23, AC23, AE21

BZ58 DI-SESS-81759A/T

Support Equipment Recommendation Data Standard/Modified Hand Tools List

BZ59 DI-ILSS-80134A/T Proposed Spare Parts List AG34

BZ60 DI-MISC-81863/T Contractual Shipping Documentation

GZ32, NZ32, QZ32, SZ32, UZ25, WZ25,

YZ25, AA25, AC25, AE25, AG20

BZ61 RESERVED RESERVED

BZ62 RESERVED RESERVED

BZ63 RESERVED RESERVED

BZ64 RESERVED RESERVED

BZ65

DI-MISC-81454C

Automated Computer Program Identification Number (ACPIN) Data and Control Record

AG31

BZ66 RESERVED RESERVED

BZ67 DI-MGMT-81941/T Obsolescence Alert Notice

GZ40, NZ40, QZ40, SZ40, UZ33, WZ33,

YZ33, AA33, AC33, AE33 , AG22

BZ68 DI-PSSS-81523C/T

Training Conduct Support Document (TCSD) ORG-DEPOT Operator & Maintenance

GZ41, AH01

BZ69 DI-TMSS-80067B/T

Technical Manual (TM) Contractor Furnished Aeronautical Equipment or Contractor Furnished Equipment (CFAE/CFE) Notices

GZ42, NZ42, QZ42, SZ42

BZ70 DI-HFAC-80747B/T

Human Engineering Design Approach Document-Maintainer

BZ71 DI-SESS-81497A/T

Reliability and Maintainability Predictions Report

BZ72 RESERVED RESERVED

BZ73 RESERVED RESERVED

CLIN

Name

BZ74 RESERVED RESERVED

BZ75 DI-IPSC-81427A/T

Software Development Plan (SDP) (Software/Firmware)

BZ76 DI-QCIC-81795/T Software Quality Assurance Report

BZ77 DI-IPSC-81441A/T

Software Product Specification (SPS) Software/Firmware

BZ78 DI-IPSC-81433A/T

Software Requirements Specification

(SRS)

BZ79 DI-SESS-81314A/T

System/Segment Interface Control Specification (ICS)

BZ80 DI-IPSC-81435A/T Software Design Description (SDD)

BZ81 DI-IPSC-81442A/T Software Version Description (SVD) AG32

BZ82 RESERVED RESERVED

BZ83 DI-MISC-80508B/T

Technical Report - Study/Services Contractor Baseline Changes

BZ84 DI-IPSC-81438A/T Software Test Plan (STP)

BZ85 DI-IPSC-81443A/T Software User Manual (SUM)

BZ86 DI-IPSC-81448B/T Firmware Support Manual (FSM)

BZ87 DI-IPSC-81488/T Computer Software Product AG24

BZ88 DI-EMCS-81687/T TEMPEST Control Plan (TCP)

BZ89 RESERVED RESERVED

BZ90 RESERVED RESERVED

BZ91 RESERVED RESERVED

BZ92 DI-MGMT-81845/T

Information Assurance (IA) Design Review Information Package (DRIP)

BZ93 DI-SESS-81343A/T

Information Security (INFOSEC) Boundary Configuration Management Plan (BCMP)

BZ94 DI-MISC-80508B/T Technical Report-Study/Services

0006 T.O.s FFP CZ CZ01 TM-86-01P ARTS-V2 Technical Manuals (PRA)

TDP &

DWGs

FFP DZ

DZ01 DI-IPSC-81431A/T System/Subsystem Specification (SSS)

DZ02 RESERVED RESERVED

DZ03 DI-IPSC-81432A/T

System/Subsystem Design Description (SSDD) - Hardware/Software

DZ04 DI-IPSC-81434A/T

Interface Requirements Specification (IRS)

- Hardware/Software

DZ05 DI-IPSC-81436A/T

Interface Design Description (IDD) - Hardware/Software

DZ06 DI-SESS-81121A/T Baseline Description Document GZ08

DZ07 DI-SESS-81248B/T

Interface Control Document (ICD) - Hardware

DZ08 RESERVED RESERVED

DZ09 RESERVED RESERVED

DZ10 DI-SESS-81002F/T

Developmental Design Drawings/Models and Associated Lists

DZ11 RESERVED RESERVED

CLIN

Name

DZ12 DI-SESS-81010E/T Source Control Drawing Approval Request GZ33, AG25

0005 TEST NSP EZ

EZ01 DI-NDTI-80566A/T Test Plan - EMC/EMI

EZ02

DI-NDTI-80603A/T

Test Procedure & Electromagnetic Interference Test Procedures

(EMITP) – EMC/EMI

EZ03

DI-NDTI-80809B/T

Test/Inspection Report & Electromagnetic Interference Test Report (EMITR) –

ECM/EMI

EZ04 RESERVED RESERVED

EZ05 RESERVED RESERVED

EZ06 RESERVED RESERVED

EZ07 DI-NDTI-80566A/T Test Plan - Environmental (ENV)

EZ08 DI-NDTI-80603A/T Test Procedure - Environmental (ENV)

EZ09 DI-NDTI-80809B/T Test/Inspection Report - Environmental

EZ10 DI-QCIC-80553A/T Acceptance Test Plan - Factory AE39, GZ60, NZ47, QZ47,SZ47

EZ11 DI-NDTI-80603A/T Test Procedure - Factory Acceptance Test AE40, GZ61, NZ48, QZ48, SZ48

EZ12 DI-NDTI-80809B/T

Test/Inspection Report - Factory Acceptance Test (FAT)

GZ62, NZ45, QZ45, SZ45, AE38

EZ13 DI-MGMT-81844 Information Assurance (IA) Test Plan

EZ14 DI-NDTI-80603A/T Test Procedure – Information Assurance

EZ15 DI-NDTI-80809B/T

Test/Inspection Report - Information Assurance (IA)

EZ16 DI-NDTI-80566A/T Test Plan - Mobility

EZ17 DI-NDTI-80603A/T Test Procedure - Mobility

EZ18 DI-NDTI-80809B/T Test/Inspection Report - Mobility

EZ19 DI-NDTI-80566A/T Test Plan - Radar Cross Section AZ01, GZ69, NZ23, QZ23, SZ23

EZ20 DI-NDTI-80603A/T Test Procedure - Radar Cross Section AZ02, GZ70, NZ24, QZ24, SZ24

EZ21 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

AZ03, GZ71, NZ25, QZ25, SZ25

EZ22 DI-NDTI-81585A/T Reliability Test Plan

EZ23 DI-NDTI-80603A/T Test Procedure - Reliability

EZ24 DI-NDTI-80809B/T Test/Inspection Report - Reliability

EZ25 DI-NDTI-80566A/T Test Plan - Radio Frequency

EZ26 DI-NDTI-80603A/T Test Procedure - Radio Frequency

EZ27 DI-NDTI-80809B/T Test/Inspection Report - Radio Frequency

EZ28 DI-QCIC-80553A Site Acceptance Test (SAT) Plan GZ78, NZ52, QZ52, SZ52

EZ29 DI-NDTI-80603A/T

Test Procedure – Site Acceptance Test

(SAT)

AE41, GZ79, NZ53, QZ53, SZ53

EZ30 DI-NDTI-80809B/T

Test/Inspection Report - Site Acceptance Test

GZ80, NZ21, QZ21, SZ21, AE34

EZ31 DI-IPSC-81439A/T Software Test Description (STD)

EZ32 DI-IPSC-81438A/T Software Test Plan (STP)

EZ33 DI-IPSC-81440A/T Software Test Report (STR)

EZ34 DI-EMCS-81683/T

TEMPEST Test Plan (TTP) – Emission Security

CLIN

Name

EZ35 DI-MGMT-81844/T

Information Assurance (IA) Test Plan (TP)

- Cybersecurity

EZ36 DI-MGMT-81843/T

Information Assurance (IA) Test Report - Cybersecurity

EZ37 DI-NDTI-80603A/T Test Procedure - Tempest

EZ38 DI-NDTI-80809B/T Test/Inspection Report - Tempest

0009 ECPs FFP/TBD FZ FZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

MZ01, PZ01, RZ01, TZ01, VZ01, XZ01,

ZZ01, AB01, AD01, AF01

Produc tion

Data - Option

Yr. 1

NSP GZ

GZ01 DI-ADMN-81373/T Presentation Material

BZ01, NZ01, QZ01, SZ01, UZ01, WZ01,

YZ01, AA01, AC01, AE01, AG01

GZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, NZ02, QZ02, SZ02, UZ02, WZ02,

YZ02, AA02, AC02,AE02, AG02

GZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, NZ03, QZ03, SZ03, UZ03, WZ03,

YZ03, AA03, AC03, AE03, AG03

GZ04 DI-MGMT-81453A/T Data Accession List (DAL) BZ04, NZ04, QZ04, SZ04, AE04, AG04

GZ05 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

BZ06, AE05, AG05, AZ04, NZ05, QZ05,

SZ05, UZ04, WZ04, YZ04, AA04, AC04

GZ06 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, NZ06, QZ06, SZ06, UZ05, WZ05,

YZ05, AA05, AC05, AE06, AG06

GZ07 DI-MGMT-81642/T Small Business Subcontracting Report BZ08, NZ07, QZ07, SZ07, AE07, AG07

GZ08 DI-SESS-81121A/T Baseline Description Document DZ06

GZ09 RESERVED RESERVED

GZ10 DI-SAFT-81563/T Accident/Incident Report

BZ32, NZ10, QZ10, SZ10, UZ07, WZ07,

YZ07, AA07, AC07, AE10, AG10

GZ11 RESERVED RESERVED

GZ12 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, NZ12, QZ12, SZ12, UZ09, WZ09,

YZ09, AA09, AC09, AE12, AG12

GZ13 RESERVED RESERVED

GZ14 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, NZ14, QZ14, SZ14, UZ11, WZ11,

YZ11, AA11, AC11

GZ15 RESERVED RESERVED

GZ16 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

BZ37, NZ16, QZ16, SZ16, UZ12, WZ12,

YZ12, AA12, AC12

GZ17 DI-SAFT-80101B/T

System Safety Hazard Analysis Report

(SSHAR)

BZ38, AG15

GZ18 RESERVED RESERVED

GZ19 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

BZ42, NZ19, QZ19, SZ19, UZ14, WZ14,

YZ14, AA14, AC14, AE17, AG17

GZ20

DI-MGMT-81804A/T

Activity, Validation and Verification Report

BZ40, NZ20, QZ20, SZ20, UZ15, WZ15,

YZ15, AA15, AC15, AE18, AG18

GZ21 DI-MISC-80508B/T

Technical Report - Study/Services - Training Program Materials (Operations)

BZ51

GZ22 DI-SESS-81315B/T

Failure Analysis and Corrective Action Report (FACAR)

BZ41, NZ22, QZ22, SZ22, UZ16, WZ16,

YZ16, AA16, AC16, AE19, AG19

GZ23 RESERVED RESERVED

GZ24 RESERVED RESERVED

GZ25 RESERVED RESERVED

CLIN

Name

GZ26 DI-MGMT-81720/T

Validation Completion Report- ORG/DEPOT Operator & Maintenance Technical Manual

BZ46

GZ27 RESERVED RESERVED

GZ28 DI-SESS-81757A/T

Design Review Information Package

(DRIP)

BZ54, AG27

GZ29 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, NZ29, QZ29, SZ29, UZ22, WZ22,

GZ30 DI-SESS-80642D/T Notice of Revision (NOR)

BZ57, NZ30, QZ30, SZ30, UZ23, WZ23,

GZ31 RESERVED RESERVED

GZ32 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, NZ32, QZ32, SZ32, UZ25, WZ25,

GZ33 DI-SESS-81010E/T

Source Control Drawing Approval Request

(SCDAR)

DZ12, AG25

GZ34 DI-PACK-80121C/T Special Packaging Instructions (SPIs)

GZ35 DI-PACK-80120C/T Preservation and Packing Data

GZ36 DI-PACK-80683B/T

Container Design Retrieval System (CDRS) Search Request

GZ37 DI-PACK-80684B/T

Container Design Retrieval System (CDRS) Data Input

GZ38 RESERVED RESERVED

GZ39 DI-PACK-81059A/T

Performance Orientated Packaging Test

GZ40 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, NZ40, QZ40, SZ40, UZ33, WZ33,

GZ41

DI-PSSS-81523C

(TCSD) ORG-DEPOT Operator & Maintenance

BZ68, AH01

GZ42 DI-TMSS-80067B/T

Furnished Aeronautical Equipment or Contractor Furnished Equipment (CFAE/CFE) Notices

BZ69, NZ42, QZ42, SZ42

GZ43 RESERVED RESERVED

GZ44 DI-MGMT-81797/T Program Management Plan

BZ20, NZ44, QZ44, SZ44, UZ37, WZ37,

YZ37, AA37, AC37, AE35, AG30

GZ45 RESERVED RESERVED

GZ46 RESERVED RESERVED

GZ47 RESERVED RESERVED

GZ48 RESERVED RESERVED

GZ49 DI-TMSS-81819A/T Technical Manual Validation Certificate BZ19

GZ50 DI-IPSC-81429A/T Software Transition Plan (STrP)

GZ51 RESERVED RESERVED

GZ52 RESERVED RESERVED

CLIN

Name

GZ53 DI-MISC-80508B/T

Requirements Management Application Report

BZ53, AG09

GZ54 RESERVED RESERVED

GZ55 RESERVED RESERVED

GZ56 RESERVED RESERVED

GZ57 RESERVED RESERVED

GZ58 RESERVED RESERVED

GZ59 RESERVED RESERVED

GZ60 DI-QCIC-80553A/T Acceptance Test Plan - Factory EZ10, AE39, NZ47, QZ47, SZ47

GZ61 DI-NDTI-80603A/T Test Procedure - Factory Acceptance Test EZ11, AE40, NZ48, QZ48, SZ48

GZ62 DI-NDTI-80809B/T

Test/Inspection Report - Factory Acceptance Test (FAT)

EZ12, NZ45, QZ45, SZ45, AE38

GZ63 RESERVED RESERVED

GZ64 RESERVED RESERVED

GZ65 RESERVED RESERVED

GZ66 RESERVED RESERVED

GZ67 RESERVED RESERVED

GZ68 RESERVED RESERVED

GZ69 DI-NDTI-80566A/T Test Plan - Radar Cross Section AZ01, EZ19, NZ23, QZ23, SZ23

GZ70 DI-NDTI-80603A/T Test Procedure - Radar Cross Section AZ02, EZ20, NZ24, QZ24, SZ24

GZ71 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

AZ03, EZ21, NZ25, QZ25, SZ25

GZ72 RESERVED RESERVED

GZ73 RESERVED RESERVED

GZ74 RESERVED RESERVED

GZ75 RESERVED RESERVED

GZ76 RESERVED RESERVED

GZ77 RESERVED RESERVED

GZ78 DI-QCIC-80553A Site Acceptance Test (SAT) Plan EZ28, NZ52, QZ52, SZ52

GZ79 DI-NDTI-80603A/T

Test Procedure – Site Acceptance Test

(SAT)

EZ29, AE41, NZ53, QZ53, SZ53

GZ80 DI-NDTI-80809B/T

Test/Inspection Report - Site Acceptance Test

EZ30, NZ21, QZ21, SZ21, AE34

GZ81 RESERVED RESERVED

GZ82 RESERVED RESERVED

GZ83 RESERVED RESERVED

GZ84 RESERVED RESERVED

GZ85 RESERVED RESERVED

GZ86 RESERVED RESERVED

GZ87 RESERVED RESERVED

CLIN

Name

Produc tion Tech Order

Option

Yr. 1

FFP HZ HZ01 TM-86-01P ARTS-V2 Technical Manuals (Production) tion

TDP -

Option

Yr. 1

N/A JZ JZ01 DI-SESS-81000E/T

Product Drawings/Models and Associated Lists tion Log

Data - Option

FFP KZ KZ01 DI-SESS-81758A/T Logistics Product Data (LPD) tion

Provisi oning Data - Option

FFP LZ LZ01 DI-SESS-81874/T Engineering Data for Provisioning (EDFP) tion

ECP -

Option Yr. 1

FFP/TBD MZ MZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, PZ01, RZ01, TZ01, VZ01, XZ01,

ZZ01, AB01, AD01, AF01

Produc tion

Data - Option

Yr. 2

NSP NZ

NZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, QZ01, SZ01, UZ01, WZ01,

YZ01, AA01, AC01, AE01, AG01

NZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, QZ02, SZ02, UZ02, WZ02,

YZ02, AA02, AC02, AE02, AG02

NZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, QZ03, SZ03, UZ03, WZ03,

YZ03, AA03, AC03, AE03, AG03

NZ04 DI-MGMT-81453A/T Data Accession List (DAL) BZ04, GZ04, QZ04, SZ04, AE04, AG04

NZ05 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

BZ06, AE05, AG05, AZ04, GZ05, QZ05,

SZ05, UZ04, WZ04, YZ04, AA04, AC04

NZ06 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, GZ06, QZ06, SZ06, UZ05, WZ05,

YZ05, AA05, AC05, AE06, AG06

NZ07 DI-MGMT-81642/T Small Business Subcontracting Report BZ08, GZ07, QZ07, SZ07, AE07, AG07

NZ08 RESERVED RESERVED

NZ09 RESERVED RESERVED

NZ10 DI-SAFT-81563/T Accident/Incident Report

BZ32, GZ10, QZ10, SZ10, UZ07, WZ07,

YZ07, AA07, AC07, AE10, AG10

NZ11 RESERVED RESERVED

NZ12 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, GZ12, QZ12, SZ12, UZ09, WZ09,

YZ09, AA09, AC09, AE12, AG12

NZ13 RESERVED RESERVED

NZ14 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, GZ14, QZ14, SZ14, UZ11, WZ11,

YZ11, AA11, AC11

NZ15 RESERVED RESERVED

NZ16 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

BZ37, GZ16, QZ16, SZ16, UZ12, WZ12,

YZ12, AA12, AC12

CLIN

Name

NZ17 RESERVED RESERVED

NZ18 RESERVED RESERVED

NZ19 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

BZ42, GZ19, QZ19, SZ19, UZ14, WZ14,

NZ20 DI-MGMT-81804A/T

Activity, Validation and Verification Report

BZ40, GZ20, QZ20, SZ20, UZ15, WZ15,

YZ15, AA15, AC15, AE18, AG18

NZ21 DI-NDTI-80809B/T

Test/Inspection Report - Site Acceptance Test

EZ30, GZ80, QZ21, SZ21, AE34

NZ22 DI-SESS-81315B/T

Failure Analysis and Corrective Action Report (FACAR)

BZ41, GZ22, QZ22, SZ22, UZ16, WZ16,

YZ16, AA16, AC16, AE19, AG19

NZ23 DI-NDTI-80566A/T Test Plan - Radar Cross Section AZ01, EZ19, GZ69, QZ23, SZ23

NZ24 DI-NDTI-80603A/T Test Procedure - Radar Cross Section AZ02, EZ20, GZ70, QZ24, SZ24

NZ25 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

AZ03, EZ21, GZ71, QZ25, SZ25

NZ26 RESERVED RESERVED

NZ27 RESERVED RESERVED

NZ28 RESERVED RESERVED

NZ29 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, GZ29, QZ29, SZ29, UZ22, WZ22,

NZ30 DI-SESS-80642D/T Notice of Revision (NOR)

BZ57, GZ30, QZ30, SZ30, UZ23, WZ23,

NZ31 RESERVED RESERVED

NZ32 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, GZ32, QZ32, SZ32, UZ25, WZ25,

YZ25, AA25, AC25, AE25, AG20

NZ33 RESERVED RESERVED

NZ34 RESERVED RESERVED

NZ35 RESERVED RESERVED

NZ36 RESERVED RESERVED

NZ37 RESERVED RESERVED

NZ38 RESERVED RESERVED

NZ39 RESERVED RESERVED

NZ40 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, GZ40, QZ40, SZ40, UZ33, WZ33,

NZ41 RESERVED RESERVED

NZ42

DI-TMSS-80067B/T

Furnished Aeronautical Equipment or

BZ69, GZ42, QZ42, SZ42

NZ43 RESERVED RESERVED

NZ44 DI-MGMT-81797/T Program Management Plan

BZ20, GZ44, QZ44, SZ44, UZ37, WZ37,

NZ45 DI-NDTI-80809B/T

Test/Inspection Report – Factory Acceptance Test

SZ45, AE38, EZ12, GZ62, QZ45

NZ46 RESERVED RESERVED

CLIN

Name

NZ47 DI-QCIC-80553A/T Acceptance Test Plan - Factory EZ10, AE39, GZ60, QZ47, SZ47

NZ48 DI-NDTI-80603A/T Test Procedure - Factory Acceptance Test EZ11, AE40, GZ61, QZ48, SZ48

NZ49 RESERVED RESERVED

NZ50 RESERVED RESERVED

NZ51 RESERVED RESERVED

NZ52 DI-QCIC-80553A Site Acceptance Test (SAT) Plan EZ78, GZ78, QZ52, SZ52

NZ53 DI-NDTI-80603A/T

Test Procedure – Site Acceptance Test

(SAT)

EZ29, AE41, GZ79, QZ53, SZ53

tion

ECP -

Option Yr. 2

FFP/TBD

PZ PZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, MZ01, RZ01, TZ01, VZ01, XZ01,

ZZ01, AB01, AD01, AF01

Produc tion

Data - Option

Yr. 3

NSP QZ

QZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, NZ01, SZ01, UZ01, WZ01,

YZ01, AA01, AC01, AE01, AG01

QZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, NZ02, SZ02, UZ02, WZ02,

YZ02, AA02, AC02,AE02, AG02

QZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, NZ03, SZ03, UZ03, WZ03,

YZ03, AA03, AC03, AE03, AG03

QZ04 DI-MGMT-81453A/T Data Accession List (DAL) BZ04, GZ04, NZ04, SZ04, AE04, AG04

QZ05 DI-MGMT-81861A/T

Integreated Program Management Support

(IPMR)

BZ06, AE05, AG05, AZ04, GZ05, NZ05,

SZ05, UZ04, WZ04, YZ04, AA04, AC04

QZ06 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, GZ06, NZ06, SZ06, UZ05, WZ05,

YZ05, AA05, AC05, AE06, AG06

QZ07 DI-MGMT-81642/T Small Business Subcontracting Report BZ08, GZ07, NZ07, SZ07, AE07, AG07

QZ08 RESERVED RESERVED

QZ09 RESERVED RESERVED

QZ10 DI-SAFT-81563/T Accident/Incident Report

BZ32, GZ10, NZ10, SZ10, UZ07, WZ07,

YZ07, AA07, AC07, AE10, AG10

QZ11 RESERVED RESERVED

QZ12 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, GZ12, NZ12, SZ12, UZ09, WZ09,

YZ09, AA09, AC09, AE12, AG12

QZ13 RESERVED RESERVED

QZ14 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, GZ14, NZ14, SZ14, UZ11, WZ11,

YZ11, AA11, AC11

QZ15 RESERVED RESERVED

QZ16 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

BZ37, GZ16, NZ16, SZ16, UZ12, WZ12,

YZ12, AA12, AC12

QZ17 RESERVED RESERVED

QZ18 RESERVED RESERVED

QZ19 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

BZ42, GZ19, NZ19, SZ19, UZ14, WZ14,

QZ20

Activity, Validation and Verification Report

BZ40, GZ20, NZ20, SZ20, UZ15, WZ15,

YZ15, AA15, AC15, AE18, AG18

QZ21 DI-NDTI-80809B/T

Test/Inspection Report - Site Acceptance Test

EZ30, GZ80, NZ21, SZ21, AE34

CLIN

Name

QZ22 DI-SESS-81315B/T

Report (FACAR)

BZ41, GZ22, NZ22, SZ22, UZ16, WZ16,

QZ23 DI-NDTI-80566A/T Test Plan - Radar Cross Section AZ01, EZ19, GZ69, NZ23, SZ23

QZ24 DI-NDTI-80603A/T Test Procedure - Radar Cross Section AZ02, EZ20, GZ70, NZ24, SZ24

QZ25 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

AZ03, EZ21, GZ71, NZ25, SZ25

QZ26 RESERVED RESERVED

QZ27 RESERVED RESERVED

QZ28 RESERVED RESERVED

QZ29 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, GZ29, NZ29, SZ29, UZ22, WZ22,

QZ30 DI-SESS-80642D/T Notice of Revision (NOR)

BZ57, GZ30, NZ30, SZ30, UZ23, WZ23,

QZ31 RESERVED RESERVED

QZ32 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, GZ32, NZ32, SZ32, UZ25, WZ25,

QZ33 RESERVED RESERVED

QZ34 RESERVED RESERVED

QZ35 RESERVED RESERVED

QZ36 RESERVED RESERVED

QZ37 RESERVED RESERVED

QZ38 RESERVED RESERVED

QZ39 RESERVED RESERVED

QZ40 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, GZ40, NZ40, SZ40, UZ33, WZ33,

QZ41 RESERVED RESERVED

QZ42 DI-TMSS-80067B/T

Furnished Aeronautical Equipment or Contractor Furnished Equipment (CFAE/CFE) Notices

BZ69, GZ42, NZ42, SZ42

QZ43 RESERVED RESERVED

QZ44 DI-MGMT-81797/T Program Management Plan

GZ44, NZ44, BZ20, SZ44, UZ37, WZ37,

QZ45 DI-NDTI-80809B/T

Acceptance Test

AE38, EZ12, GZ62, NZ45, SZ45

QZ46 RESERVED RESERVED

QZ47 DI-QCIC-80553A/T Acceptance Test Plan - Factory EZ10, AE39, GZ60, NZ47, SZ47

QZ48 DI-NDTI-80603A/T Test Procedure - Factory Acceptance Test EZ11, AE40, GZ61, NZ48, SZ48

QZ49 RESERVED RESERVED

QZ50 RESERVED RESERVED

CLIN

Name

QZ51 RESERVED RESERVED

QZ52 DI-QCIC-80553A Site Acceptance Test (SAT) Plan EZ28, GZ78, NZ52, SZ52

QZ53 DI-NDTI-80603A/T

Test Procedure – Site Acceptance Test

(SAT)

EZ29, AE41, GZ79, NZ53, SZ53

Produc tion

ECP -

Option Yr. 3

FFP/TBD RZ RZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, MZ01, PZ01, TZ01, VZ01, XZ01,

ZZ01, AB01, AD01, AF01

Produc tion

Data - Option

Yr. 4

NSP SZ

SZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, NZ01, QZ01, UZ01,

WZ01, YZ01, AA01, AC01, AE01, AG01

SZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, NZ02, QZ02, UZ02,

WZ02, YZ02, AA02, AC02,AE02, AG02

SZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, NZ03, QZ03, UZ03,

WZ03, YZ03, AA03, AC03, AE03, AG03

SZ04 DI-MGMT-81453A/T Data Accession List (DAL) BZ04, GZ04, NZ04, QZ04, AE04, AG04

SZ05 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

BZ06, AE05, AG05, AZ04, GZ05, NZ05,

QZ05, UZ04, WZ04, YZ04, AA04, AC04

SZ06 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, GZ06, NZ06, QZ06, UZ05,

WZ05, YZ05, AA05, AC05, AE06, AG06

SZ07 DI-MGMT-81642/T Small Business Subcontracting Report BZ08, GZ07, NZ07, QZ07, AE07, AG07

SZ08 RESERVED RESERVED

SZ09 RESERVED RESERVED

SZ10 DI-SAFT-81563/T Accident/Incident Report

BZ32, GZ10, NZ10, QZ10, UZ07,

WZ07, YZ07, AA07, AC07, AE10, AG10

SZ11 RESERVED RESERVED

SZ12 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, GZ12, NZ12, QZ12, UZ09,

WZ09, YZ09, AA09, AC09, AE12, AG12

SZ13 RESERVED RESERVED

SZ14 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, GZ14, NZ14, QZ14, UZ11,

WZ11, YZ11, AA11, AC11

SZ15 RESERVED RESERVED

SZ16 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

BZ37, GZ16, NZ16, QZ16, UZ12,

WZ12, YZ12, AA12, AC12

SZ17 RESERVED RESERVED

SZ18 RESERVED RESERVED

SZ19 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

BZ42, GZ19, NZ19, QZ19, UZ14,

WZ14, YZ14, AA14, AC14, AE17, AG17

SZ20 DI-MGMT-81804A/T

Item Unique Identification (IUID) Marking Activity, Validation and Verification Report

BZ40, GZ20, NZ20, QZ20, UZ15,

WZ15, YZ15, AA15, AC15, AE18, AG18

SZ21 DI-NDTI-80809B/T

Test/Inspection Report - Site Acceptance Test

EZ30, GZ80, NZ21, QZ21, AE34

SZ22 DI-SESS-81315B/T

Failure Analysis and Corrective Action Report (FACAR)

BZ41, GZ22, NZ22, QZ22, UZ16,

WZ16, YZ16, AA16, AC16, AE19, AG19

SZ23 DI-NDTI-80566A/T Test Plan - Radar Cross Section AZ01, EZ19, GZ69, NZ23, QZ23

SZ24 DI-NDTI-80603A/T Test Procedure - Radar Cross Section AZ02, EZ20, GZ70, NZ24, QZ24

SZ25 DI-NDTI-80809B/T

Test/Inspection Report - Radar Cross Section

AZ03, EZ21, GZ71, NZ25, QZ25

CLIN

Name

SZ26 RESERVED RESERVED

SZ27 RESERVED RESERVED

SZ28 RESERVED RESERVED

SZ29 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, GZ29, NZ29, QZ29, UZ22,

WZ22, YZ22, AA22, AC22, AE20

SZ30 DI-SESS-80642D/T Notice of Revision (NOR) BZ57, GZ30, NZ30, QZ30, UZ23, WZ23, YZ23, AA23, AC23, AE21

SZ31 RESERVED RESERVED

SZ32 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, GZ32, NZ32, QZ32, UZ25,

WZ25, YZ25, AA25, AC25, AE25,

AG20

SZ33 RESERVED RESERVED

SZ34 RESERVED RESERVED

SZ35 RESERVED RESERVED

SZ36 RESERVED RESERVED

SZ37 RESERVED RESERVED

SZ38 RESERVED RESERVED

SZ39 RESERVED RESERVED

SZ40 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, GZ40, NZ40, QZ40, UZ33,

WZ33, YZ33, AA33, AC33, AE33,

AG22

SZ41 RESERVED RESERVED

SZ42

DI-TMSS-80067B/T

Furnished Aeronautical Equipment or

BZ69, GZ42, NZ42, QZ42

SZ43 RESERVED RESERVED

SZ44 DI-MGMT-81797/T Program Management Plan

BZ20, GZ44, NZ44, QZ44, UZ37,

WZ37, YZ37, AA37, AC37, AE35,

AG30

SZ45 DI-NDTI-80809B/T

Test/Inspection Report – Factory Acceptance Test (FAT)

AE38, EZ12, GZ62, NZ45, QZ45

SZ46 RESERVED RESERVED

SZ47 DI-QCIC-80553A/T Acceptance Test Plan - Factory EZ10, AE39, GZ60, NZ47,QZ47

SZ48 DI-NDTI-80603A/T Test Procedure - Factory Acceptance Test EZ11, AE40, GZ61, NZ48, QZ48

SZ49 RESERVED RESERVED

SZ50 RESERVED RESERVED

SZ51 RESERVED RESERVED

SZ52 DI-QCIC-80553A Site Acceptance Test (SAT) Plan EZ28, GZ78, NZ52, QZ52

SZ53 DI-NDTI-80603A/T

Test Procedure – Site Acceptance Test

(SAT)

EZ29, AE41, GZ79, NZ53, QZ53

Produc tion

ECP -

Option Yr. 4

FFP/TBD TZ TZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, MZ01, PZ01, RZ01, VZ01,

XZ01, ZZ01, AB01, AD01, AF01

CLIN

Name

ICS

Data - Option

Yr. 1

NSP UZ

UZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, NZ01, QZ01, SZ01, WZ01,

YZ01, AA01, AC01, AE01, AG01

UZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, NZ02, QZ02, SZ02, WZ02,

YZ02, AA02, AC02,AE02, AG02

UZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, NZ03, QZ03, SZ03, WZ03,

YZ03, AA03, AC03, AE03, AG03

UZ04 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

BZ06, AE05, AG05, AZ04, GZ05, NZ05,

QZ05, SZ05, WZ04, YZ04, AA04, AC04

UZ05 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, GZ06, NZ06, QZ06, SZ06, WZ05,

YZ05, AA05, AC05, AE06, AG06

UZ06 RESERVED RESERVED

UZ07 DI-SAFT-81563/T Accident/Incident Report

BZ32, GZ10, NZ10, QZ10, SZ10, WZ07,

YZ07, AA07, AC07, AE10, AG10

UZ08 RESERVED RESERVED

UZ09 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, GZ12, NZ12, QZ12, SZ12, WZ09,

YZ09, AA09, AC09, AE12, AG12

UZ10 RESERVED RESERVED

UZ11 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, GZ14, NZ14, QZ14, SZ14, WZ11,

YZ11, AA11, AC11

UZ12 DI-MISC-80508B/T

Technical Report - Study/Services - Technical Staffing Profile

BZ37, GZ16, NZ16, QZ16, SZ16, WZ12,

YZ12, AA12, AC12

UZ13 RESERVED RESERVED

UZ14 DI-SAFT-80970A/T

Critical Safety Item, Characteristic and Critical Defect Report

BZ42, GZ19, NZ19, QZ19, SZ19, WZ14,

UZ15

Activity, Validation and Verification Report

BZ40, GZ20, NZ20, QZ20, SZ20, WZ15,

YZ15, AA15, AC15, AE18, AG18

UZ16 DI-SESS-81315B/T

Failure Analysis and Corrective Action Report (FACAR)

BZ41, GZ22, NZ22, QZ22, SZ22, WZ16,

UZ17

DI-ILSS-81226/T

Interim Contractor Support (ICS) Parts Usage and Maintenance Data Collection Report (PUMD)

WZ17, YZ17, AA17, AC17

UZ18 RESERVED RESERVED

UZ19 DI-ILSS-80386/T Repairable Item Inspection Report (RIIR) WZ19, YZ19, AA19, AC19

UZ20 RESERVED RESERVED

UZ21 RESERVED RESERVED

UZ22 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, GZ29, NZ29, QZ29, SZ29, WZ22,

YZ22, AA22, AC22, AE20

UZ23 DI-SESS-80642D/T Notice of Revision (NOR)

BZ57, GZ30, NZ30, QZ30, SZ30, WZ23,

YZ23, AA23, AC23, AE21

UZ24 RESERVED RESERVED

UZ25 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, GZ32, NZ32, QZ32, SZ32, WZ25,

UZ26 RESERVED RESERVED

CLIN

Name

UZ27 RESERVED RESERVED

UZ28 RESERVED RESERVED

UZ29 RESERVED RESERVED

UZ30 RESERVED RESERVED

UZ31 RESERVED RESERVED

UZ32 RESERVED RESERVED

UZ33 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, GZ40, NZ40, QZ40, SZ40, WZ33,

YZ33, AA33, AC33, AE33 , AG22

UZ34 RESERVED RESERVED

UZ35 RESERVED RESERVED

UZ36 RESERVED RESERVED

UZ37 DI-MGMT-81797/T Program Management Plan

BZ20, GZ44, NZ44, QZ44, SZ44, WZ37,

YZ37, AA37, AC37, AE35, AG30

UZ38 RESERVED RESERVED

UZ39 RESERVED RESERVED

UZ40 RESERVED RESERVED

UZ41 RESERVED RESERVED

UZ42 RESERVED RESERVED

UZ43 RESERVED RESERVED

UZ44 RESERVED RESERVED

ICS

ECP -

Option Yr. 1

FFP/TBD VZ VZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, MZ01, PZ01, RZ01, TZ01, XZ01,

ZZ01, AB01, AD01, AF01

ICS

Data -

Option Yr. 2

NSP WZ

WZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, NZ01, QZ01, SZ01, UZ01,

YZ01, AA01, AC01, AE01, AG01

WZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, NZ02, QZ02, SZ02, UZ02,

YZ02, AA02, AC02,AE02, AG02

WZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, NZ03, QZ03, SZ03, UZ03,

YZ03, AA03, AC03, AE03, AG03

WZ04 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR)

BZ06, AG05, YZ04, AA04, AC04, AE05,

AZ04, GZ05, NZ05, QZ05, SZ05, UZ04

WZ05 DI-MGMT-81468/T Contract Fund Status Report (CFSR)

BZ07, GZ06, NZ06, QZ06, SZ06, UZ05,

YZ05, AA05, AC05, AE06, AG06

WZ06 RESERVED RESERVED

WZ07 DI-SAFT-81563/T Accident/Incident Report

BZ32, GZ10, NZ10, QZ10, SZ10, UZ07,

YZ07, AA07, AC07, AE10, AG10

WZ08 RESERVED RESERVED

CLIN

Name

WZ09 DI-MGMT-81809/T Risk Management Status Report (RMSR)

BZ34, GZ12, NZ12, QZ12, SZ12, UZ09,

YZ09, AA09, AC09, AE12, AG12

WZ10 RESERVED RESERVED

WZ11 DI-SESS-81628/T

Reliability Development Growth Test Report

BZ35, GZ14, NZ14, QZ14, SZ14, UZ11,

YZ11, AA11, AC11

WZ12 DI-MISC-80508B/T

Technical Staffing Profile

BZ37, GZ16, NZ16, QZ16, SZ16, UZ12,

YZ12, AA12, AC12

WZ13 RESERVED RESERVED

WZ14 DI-SAFT-80970A/T

Critical Defect Report

BZ42, GZ19, NZ19, QZ19, SZ19, UZ14,

WZ15

Activity, Validation and Verification Report

BZ40, GZ20, NZ20, QZ20, SZ20, UZ15,

YZ15, AA15, AC15, AE18, AG18

WZ16 DI-SESS-81315B/T

Report (FACAR)

BZ41, GZ22, NZ22, QZ22, SZ22, UZ16,

WZ17 DI-ILSS-81226/T

UZ17, YZ17, AA17, AC17

WZ18 RESERVED RESERVED

WZ19 DI-ILSS-80386/T Repairable Item Inspection Report (RIIR) UZ19, YZ19, AA19, AC19

WZ20 RESERVED RESERVED

WZ21 RESERVED RESERVED

WZ22 DI-SESS-80640D/T Request for Variance (RFV)

BZ56, GZ29, NZ29, QZ29, SZ29, UZ22,

WZ23 DI-SESS-80642D/T Notice of Revision (NOR)

BZ57, GZ30, NZ30, QZ30, SZ30, UZ23,

WZ24 RESERVED RESERVED

WZ25 DI-MISC-81863/T Contractual Shipping Documentation

BZ60, GZ32, NZ32, QZ32, SZ32, UZ25,

WZ26 RESERVED RESERVED

WZ27 RESERVED RESERVED

WZ28 RESERVED RESERVED

WZ29 RESERVED RESERVED

WZ30 RESERVED RESERVED

WZ31 RESERVED RESERVED

WZ32 RESERVED RESERVED

WZ33 DI-MGMT-81941/T Obsolescence Alert Notice

BZ67, GZ40, NZ40, QZ40, SZ40, UZ33,

YZ33, AA33, AC33, AE33, AG22

WZ34 RESERVED RESERVED

WZ35 RESERVED RESERVED

CLIN

Name

WZ36 RESERVED RESERVED

WZ37 DI-MGMT-81797/T Program Management Plan

BZ20, GZ44, NZ44, QZ44, SZ44, UZ37,

YZ37, AA37, AC37, AE35, AG30

WZ38 RESERVED RESERVED

WZ39 RESERVED RESERVED

WZ40 RESERVED RESERVED

WZ41 RESERVED RESERVED

WZ42 RESERVED RESERVED

WZ43 RESERVED RESERVED

WZ44 RESERVED RESERVED

ICS

ECP -

Option Yr. 2

FFP/TBD XZ XZ01 DI-SESS-80639D/T Engineering Change Proposal (ECP)

FZ01, MZ01, PZ01, RZ01, TZ01, VZ01,

ZZ01, AB01, AD01, AF01

ICS

Data -

Option Yr. 3

NSP YZ

YZ01 DI-ADMN-81373/T Presentation Material

BZ01, GZ01, NZ01, QZ01, SZ01, UZ01,

WZ01, AA01, AC01, AE01, AG01

YZ02 DI-ADMN-81250A/T Conference Minutes

BZ02, GZ02, NZ02, QZ02, SZ02, UZ02,

WZ02, AA02, AC02,AE02, AG02

YZ03 DI-MGMT-81928/T Contractor’s Progress and Status Report

BZ03, GZ03, NZ03, QZ03, SZ03, UZ03,

WZ03, AA03, AC03, AE03, AG03

YZ04 DI-MGMT-81861A/T

Integrated Program Management Report

(IPMR…