SOW_Attachment_C_-_Critical_Safety_Item_(CSI)_List_(21_Feb_2019).pdf

PDF 112 KB Posted Feb 21, 2019

Attached to: T-38 Wing Acquisition
Solicitation number: FA8208-19-R-0001
Issued by: Department of the Air Force Materiel Command Lifecycle Management Center Hill Air Force Base

About this file

Written by GovTribe AI · Dec 31, 2023

This document contains a Critical Safety Item (CSI) list for structural components and flight controls on the T-38 wing. The list identifies over 100 part numbers considered CSIs, along with their descriptions and any significant characteristics as indicated in the relevant technical drawings. The CSI list provides lower-level detail on products that have critical safety requirements for the T-38 wing acquisition covered under solicitation FA8208-19-R-0001 issued by the Department of the Air Force Materiel Command Lifecycle Management Center at Hill Air Force Base. Components span various structural systems and flight controls on the wing. The solicitation referenced has yet to be posted, with contracting officer Leslie Trice now assigned, though draft pre-solicitation documents are available under number FA8208-18-R-0001.

From the source

SOW Attachment C Critical Safety Item (CSI) List

View the file

Other files

File	Type	Posted
EDL_Revision_31_Updated_28Mar2019_T-38_Wing_NSN_1560-01-527-3968XE.pdf	PDF	Apr 10, 2019
T-38_Wing_RFP_-_Industry_Questions_and_Answers_V4.pdf	PDF	Apr 10, 2019
Section_L_Revised_27_March_2019.pdf	PDF	Mar 27, 2019
T-38_Wing_RFP_-_Industry_Questions_and_Answers_V3.pdf	PDF	Mar 27, 2019
FA820819R0001_Revised_27_March_2019.pdf	PDF	Mar 27, 2019
SOW_Attachment_C_-_Critical_Safety_Item_(CSI)_List_Rev_F.pdf	PDF	Mar 27, 2019
T-38_Wing_RFP_-_Industry_Questions_and_Answers_V2.pdf	PDF	Mar 5, 2019
Section_L_Attachment_7_Cross_Reference_Table_(v2).pdf	PDF	Mar 5, 2019
Section_L_Attachment_4_Past_Performance_Questionaire_Rev_14_Feb_19.pdf	PDF	Feb 21, 2019
T-38_Wing_RFP_-_Industry_Questions_and_Answers_V1.pdf	PDF	Feb 21, 2019
FA820819R0001_Revised_20_Feb_19.pdf	PDF	Feb 21, 2019
Section_L_Revised_21_Feb_2019.pdf	PDF	Feb 21, 2019
Section_L_Attachment_6_-TEP_Pricing_Matrix_Revised_14_Feb_19.xlsx	XLSX spreadsheet	Feb 21, 2019
FA820819R0001.pdf	PDF	Feb 6, 2019
FA820819R0001.pdf	PDF	Feb 5, 2019
SOW_Attachment_F_--_Master_Tool_List.pdf	PDF	Feb 5, 2019
Section_L.pdf	PDF	Feb 5, 2019
SOW_Attachment_E_--_Analysis_Requirements_for_Non-Conformances_MRB_Process.pdf	PDF	Feb 5, 2019
EDL_Revision_29.pdf	PDF	Feb 5, 2019
Section_L_Attachment_5_--_Past_Performance_Information_Sheet_Supplement.pdf	PDF	Feb 5, 2019
SOW_Attachment_D_--_Interchangeability_and_Replaceability_List.pdf	PDF	Feb 5, 2019
ppi_tool.accdb	MDB file	Feb 5, 2019
SOW_Attachment_B_--_CDRL_Distribution_List.pdf	PDF	Feb 5, 2019
Special_Packaging_Instructions_(SPI).pdf	PDF	Feb 5, 2019
Source_Qualification_Statement.pdf	PDF	Feb 5, 2019
SOW_Attachment_A_--_Contract_Data_Requirements_List.pdf	PDF	Feb 5, 2019
Packaging.pdf	PDF	Feb 5, 2019
Section_L_Attachment_3_--_Past_Performance_Client_Authorization_Letter.pdf	PDF	Feb 5, 2019
Section_L_Attachment_7_--_Cross_Reference_Table.pdf	PDF	Feb 5, 2019
462.pdf	PDF	Feb 5, 2019
Section_M.pdf	PDF	Feb 5, 2019
Section_L_Attachment_--_1_EZ_Source_Instructions.pdf	PDF	Feb 5, 2019
Section_L_Attachment_2_--_Past_Performance_Consent_Letter.pdf	PDF	Feb 5, 2019
Section_L_Attachment_4_--_Past_Performance_Questionaire.pdf	PDF	Feb 5, 2019
SOW_for_Packaging.pdf	PDF	Feb 5, 2019
SOW_Attachment_C_--_Critical_Safety_Item_(CSI)_List.pdf	PDF	Feb 5, 2019
SOW.pdf	PDF	Feb 5, 2019
Section_L_Attachment_6_--_TEP_Pricing_Matrix.xlsx	XLSX spreadsheet	Feb 5, 2019
RFP_QAs.pdf	PDF	Jan 22, 2019
Synopsis_18_Jan_2019.pdf	PDF	Jan 18, 2019

Show all 40

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

T38 -33 Wing Finalized CSI LIST

28 April 2010

PN Description Significant Characteristics

2-23203-509

RIB INSTL, WING TO FUS

ATTACH, LH

See drawing (Rev K) for CSI requirements

2-23203-510

RIB INSTL, WING TO FUS

ATTACH, RH

See drawing (Rev K) for CSI requirements

2-23204-19

FORGING, RIB, WING TO FUS

ATTACH, LH

See drawing (Rev V) for CSI requirements

2-23204-20

FORGING, RIB, WING TO FUS

ATTACH, RH

See drawing (Rev V) for CSI requirements

2-23204-21

MACHINED RIB, WING TO FUS

ATTACH, LH

See drawing (Rev V) for CSI requirements

2-23204-22

MACHINED RIB, WING TO FUS

ATTACH, RH

See drawing (Rev V) for CSI requirements

2-23204-511

RIB ASSY, WING TO FUS

ATTACH, LH

See drawing (Rev V) for CSI requirements

2-23204-512

RIB ASSY, WING TO FUS

ATTACH, RH

See drawing (Rev V) for CSI requirements

2-23207-517 RIB INSTL, WS 64.8, LH See drawing (Rev R) for CSI requirements 2-23207-518 RIB INSTL, WS 64.8, RH See drawing (Rev R) for CSI requirements

2-23208-31

RIB, MACHINED, MLG

TRUNNION, W.S. 64.8, LH

See drawing (Rev K) for CSI requirements

2-23208-32

RIB, MACHINED, MLG

TRUNNION, W.S. 64.8, RH

See drawing (Rev K) for CSI requirements

2-23208-505

RIB ASSY, MLG TRUNNION, WS

64.8 ASSY, LH

See drawing (Rev K) for CSI requirements

2-23208-506

RIB ASSY, MLG TRUNNION, WS

64.8 ASSY, RH

See drawing (Rev K) for CSI requirements

2-23220-501

RIB INSTL, TIP ATTACH, W.S.

125, LH

See drawing (Rev M) for CSI requirements

2-23220-502

RIB INSTL, TIP ATTACH, W.S.

125 RH

See drawing (Rev M) for CSI requirements

2-23221-21

RIB, ROUGH FORGING, TIP

ATTACH, W.S. 125, LH

See drawing (Rev N) for CSI requirements

2-23221-22

RIB, ROUGH FORGING, TIP

ATTACH, W.S. 125, RH

See drawing (Rev N) for CSI requirements

2-23221-23

RIB, MACHINED FITTING, TIP

ATTACH, W.S. 125, LH

See drawing (Rev N) for CSI requirements

2-23221-24

RIB, MACHINED FITTING, TIP

ATTACH, W.S. 125, RH

See drawing (Rev N) for CSI requirements

2-23221-25

RIB, ASSEMBLY, TIP ATTACH,

W.S. 125, LH

See drawing (Rev N) for CSI requirements

2-23221-26

RIB, ASSEMBLY, TIP ATTACH,

W.S. 125, RH

See drawing (Rev N) for CSI requirements

T-38 (-33) Wing CSI List: Rev F (11 May 2017)

28 April 2010

PN Description Significant Characteristics

2-23229-507

SPAR INSTL, WING CENTER

SECTION, F.S. 330.021

See drawing (Rev M) for CSI requirements

2-23230-7

SPAR, WING CENTER SECTION,

F.S. 330.021

See drawing (Rev J) for CSI requirements

2-23239-513

SPAR INSTL, WING CENTER

SECTION, F.S. 361.572

Revision R; Note 1 (PS: FH-114); Note 6

2-23240-9

SPAR, WING CENTER SECTION,

F.S. 361.572

See drawing (Rev N) for CSI requirements

2-23251-513

SPAR INSTL 44%, WING OUTER

PANEL, W.S. 25.231 TO 64.8,

See drawing (Rev P) for CSI requirements

2-23251-514

SPAR INSTL 44%, WING OUTER

PANEL, W.S. 25.231 TO 64.8,

See drawing (Rev P) for CSI requirements

2-23252-15

SPAR, MACHINED, WING

OUTER PANEL, W.S. 25.231 TO

64.8, LH

See drawing (Rev V) for CSI requirements

2-23252-16

SPAR, MACHINED, WING

OUTER PANEL, W.S. 25.231 TO

64.8, RH

See drawing (Rev V) for CSI requirements

2-23252-509

SPAR ASSY, WING OUTER

PANEL, W.S. 25.231 TO 64.8,

See drawing (Rev V) for CSI requirements

2-23252-510

SPAR ASSY, WING OUTER

PANEL, W.S. 25.231 TO 64.8,

See drawing (Rev V) for CSI requirements

2-23263-507

SPAR INSTL 44%, WING OUTER

PANEL, W.S. 64.8 TO 82.368,

See drawing (Rev N) for CSI requirements

2-23263-508

SPAR INSTL 44%, WING OUTER

PANEL, W.S. 64.8 TO 82.368,

See drawing (Rev N) for CSI requirements

2-23264-13

SPAR ASSY, WING OUTER

PANEL, W.S. 64.8 TO 82.368,

See drawing (Rev J) for CSI requirements

2-23264-14

SPAR ASSY, WING OUTER

PANEL, W.S. 64.8 TO 82.368,

See drawing (Rev J) for CSI requirements

2-23264-15

SPAR, WING OUTER PANEL,

W.S. 64.8 TO 82.368, LH

See drawing (Rev J) for CSI requirements

2-23264-16

SPAR, WING OUTER PANEL,

W.S. 64.8 TO 82.368, RH

See drawing (Rev J) for CSI requirements

2-23265-505 SPAR Installation - 44%, WING

OUTER PANEL, W.S. 82.368 TO

101.0, LH

See drawing (Rev J) for CSI requirements

28 April 2010

PN Description Significant Characteristics

2-23265-506 SPAR Installation - 44%, WING

OUTER PANEL, W.S. 82.368 TO

101.0, RH

See drawing (Rev J) for CSI requirements

2-23270-503

SPAR INSTL, WING OUTER

PANEL, W.S. 101.0 TO 125.0,

See drawing (Rev J) for CSI requirements

2-23270-504

SPAR INSTL, WING OUTER

PANEL, W.S. 101.0 TO 125.0,

See drawing (Rev J) for CSI requirements

2-23271-17

SPAR, WING OUTER PANEL,

W.S. 101.0 TO 125.0, LH

See drawing (Rev H) for CSI requirements

2-23271-18

SPAR, WING OUTER PANEL,

W.S. 101.0 TO 125.0, RH

See drawing (Rev H) for CSI requirements

2-23271-505

SPAR ASSY, WING OUTER

PANEL, W.S. 101.0 TO 125.0,

See drawing (Rev H) for CSI requirements

2-23271-506

SPAR ASSY, WING OUTER

PANEL, W.S. 101.0 TO 125.0,

See drawing (Rev H) for CSI requirements

2-23296-7

ROUGH FORGING, 15% SPAR,

WING OUTER PANEL, W.S.

29.677 TO 125.0, LH

See drawing (Rev T) for CSI requirements

2-23297-15

ROUGH FORGING, SPAR - 66%,

WING OUTER PANEL, W.S. 25.1

TO 125, LH

See drawing (Rev N) for CSI requirements

2-23297-16

ROUGH FORGING, SPAR - 66%,

WING OUTER PANEL, W.S. 25.1

TO 125, LH

See drawing (Rev N) for CSI requirements

2-23306-5 Rough Forging - RIB-MLG

TRUNNION, W.S. 64.80

Rev D; Note 7, 8, 9, 10; material Hy-tuf steel, spec NAI-1275, 2-23311-5

SPAR, FORGING, WING OUTER

PANEL, W.S. 25.231 TO 64.8,

See drawing (Rev L) for CSI requirements

2-23316-11

SPAR - 44%, ROUGH FORGING,

WING OUTER PANEL, W.S.

82.368 TO 101.0, LH

See drawing (Rev J) for CSI requirements

2-23316-12

SPAR - 44%, ROUGH FORGING,

WING OUTER PANEL, W.S.

82.368 TO 101.0, RH

See drawing (Rev J) for CSI requirements

2-23316-13

SPAR - 44% ASSY, WING OUTER

PANEL, W.S. 82.368 TO 101.0,

See drawing (Rev J) for CSI requirements

28 April 2010

PN Description Significant Characteristics

2-23316-14

SPAR - 44% ASSY, WING OUTER

PANEL, W.S. 82.368 TO 101.0,

See drawing (Rev J) for CSI requirements

2-74153-10

SUPPORT - AILERON,

MACHINED, OPERATING

MECHANISM, RH

Revision J; Material A356-T6 CSTG AL, MATL SPEC NAI-1296;

Note 7, Note 12, Note 14

2-74153-11

SUPPORT - AILERON ASSY,

OPERATING MECHANISM, LH

Revision J; Dimensions: Zone 2: .2500, .3750; Zone 4: .312;

2-74153-12

SUPPORT - AILERON ASSY,

OPERATING MECHANISM, RH

Revision J; Dimensions: Zone 2: .2500, .3750; Zone 4: .312;

2-74153-7

SUPPORT - AILERON, ROUGH

CASTING, OPERATING

MECHANISM, LH

Revision J; Material A356-T6 CSTG AL, MATL SPEC NAI-1296;

Note 7, Note 12

2-74153-8

SUPPORT - AILERON, ROUGH

CASTING, OPERATING

MECHANISM, RH

Revision J; Material A356-T6 CSTG AL, MATL SPEC NAI-1296;

Note 7, Note 12

2-74153-9

SUPPORT - AILERON,

MACHINED, OPERATING

MECHANISM, LH

Revision J; Material A356-T6 CSTG AL, MATL SPEC NAI-1296;

Note 7, Note 12, Note 14

2-74154-10

QUADRANT - AILERON, ROUGH

CASTING, OPERATING

MECHANISM, RH

Revision F; Material A356-T6; MATL SPEC NAI-1296; Note 8

2-74154-11

QUADRANT - AILERON,

MACHINED, OPERATING

MECHANISM, LH

Revision F; Material A356-T6; MATL SPEC NAI-1296; Note 8, Note 18; Dimensions: Zone 4: A .0005, .6243, .6238; Zone 5:

.6265, .6255, .1900; Zone 6: .1900;

2-74154-12

QUADRANT - AILERON,

MACHINED, OPERATING

MECHANISM, RH

Revision F; Material A356-T6; MATL SPEC NAI-1296; Note 8, Note 18; Dimensions: Zone 4: A .0005, .6243, .6238; Zone 5:

.6265, .6255, .1900; Zone 6: .1900;

2-74154-9

QUADRANT - AILERON, ROUGH

CASTING, OPERATING

MECHANISM, LH

Revision F; Material A356-T6; MATL SPEC NAI-1296; Note 8

2-74155-3

LINK - AILERON, OPERATING

MECHANISM

Revision E; Material Plate-AL Alloy 7075-T6; MATL SPEC AMS- QQ-Q-250/12; Note 3

2-74155-5

STOP, LINK - AILERON,

OPERATING MECHANISM

Revision E; Material Sheet ALCLAD 7075-T6; MATL SPEC AMS-

QQ-Q-250/13;

2-74155-501

LINK - AILERON ASSY,

OPERATING MECHANISM

Revision E; Dimensions: Zone 3: .6243, .6238, .6243, .6238;

28 April 2010

PN Description Significant Characteristics

2-74156-3

BEAM - VALVE WALKING,

ROUGH CSTG, AILERON

OPERATING MECHANISM

See EO 18C0764-H for CSI requirements

2-74156-7

BEAM - VALVE WALKING,

MACHINED, AILERON

OPERATING MECHANISM

Revision E; MATERIAL: PERM MOLD AL 356-T6; MATL SPEC:

ASTM B108; Note 8, DIMENSION: ZONE 3: .6243, .6238, .9007, .9002, + .0005

2-74197-1

ROD END - FORWARD SURFACE

FOLLOW UP, AILERON

Revision G; MATERIAL: MAKE FROM RE4S10 OR EQUIV; MATL

SPEC: FAFNIR BRG CO. NEW BRITAIN CONN; DIMENSIONS:

.5130 + .0005; NOTE 2, NOTE 4;

2-74198-1

ROD END - AFT SURFACE

FOLLOW UP, AILERON

REVISION B; MATL: MAKE FROM RA3M5 OR EQUIV.; MATL

SPEC: FAFNIR BRG CO. NEW BRITAIN, CONN;

2-74199-1

SLEEVE - SURFACE FOLLOW UP

ROD, AILERON

REVISION E; MATERIAL: BAR-STEEL 4130-F4; MATL SPEC: MIL-S-

6758; Nickel Plate .0005 to .0008 thick all over per AMS 2404.

Solid Film lube .00035 + .00015 thick on O.D. only; Note 4;

3-23241-507

SPAR INSTL, 15%, WING OUTER

PANEL, W.S. 29.677 TO 125.0,

See drawing (Rev K) for CSI requirements

3-23241-508

SPAR INSTL, 15%, WING OUTER

PANEL, W.S. 29.677 TO 125.0,

See drawing (Rev K) for CSI requirements

3-23242-11

SPAR, 15%, WING OUTER

PANEL, W.S. 29.677 TO 125.0,

See drawing (Rev L) for CSI requirements

3-23242-12

SPAR, 15%, WING OUTER

PANEL, W.S. 29.677 TO 125.0,

See drawing (Rev L) for CSI requirements

3-23242-507 15% SPAR (WING) See drawing (Rev L) for CSI requirements 3-23242-508 15% SPAR (WING) See drawing (Rev L) for CSI requirements

3-23279-509

SPAR INSTL - 66%, WING

OUTER PANEL, W.S. 25.1 TO

125, LH

See drawing (Rev R) for CSI requirements

3-23279-510

SPAR INSTL - 66%, WING

OUTER PANEL, W.S. 25.1 TO

125, RH

See drawing (Rev R) for CSI requirements

3-23282-7

SPAR - 66%, WING OUTER

PANEL, W.S. 25.1 TO 125, LH

See drawing (Rev P) for CSI requirements

3-23282-8

SPAR - 66%, WING OUTER

PANEL, W.S. 25.1 TO 125, RH

See drawing (Rev P) for CSI requirements

3-23301-7 SKIN, UPPER MAIN WING See drawing (Rev H) for CSI requirements 3-23502-11 SKIN, LOWER MAIN WING See drawing (Rev K) for CSI requirements 3-23502-9 SKIN, LOWER MAIN WING See drawing (Rev K) for CSI requirements

28 April 2010

PN Description Significant Characteristics

3-74157-10

ARM, MACHINED, FOLLOW-UP,

AILERON OPERATING

MECHANISM, RH

REVISION C; MATL: AL EXTR. BAR 7075-T73511; MATL SPEC:

AMS-QQ-A-200/11; NOTE 4

3-74157-7

ARM, ASSY, FOLLOW-UP,

AILERON OPERATING

MECHANISM, LH

REVISION C; NOTE 7; DIMENSIONS: ZONE 3: .7493, .7510,

.2480, .2500;

3-74157-8

ARM ASSY, MACHINED,

FOLLOW-UP, AILERON

OPERATING MECHANISM, RH

REVISION C; NOTE 7; DIMENSIONS: ZONE 3: .7493, .7510,

.2480, .2500;

3-74157-9

ARM, MACHINED, FOLLOW-UP,

AILERON OPERATING

MECHANISM, LH

REVISION C; MATL: AL EXTR. BAR 7075-T73511; MATL SPEC:

AMS-QQ-A-200/11; NOTE 4

51B221-11H BOLT - BRAZIER HEAD

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B221-9H BOLT - BRAZIER HEAD

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B333-10H BOLT - CLOSE TOLERANCE

REVISION V; Note Finish paragraph; See material specs; Note heat treat parameters

51B333-9H BOLT - CLOSE TOLERANCE

REVISION V; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-3-11 BOLT - BRAZIER HEAD

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-3-13 BOLT - CLOSE TOLERANCE

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-3-27 BOLT - CLOSE TOLERANCE

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-3A2 BOLT - CLOSE TOLERANCE

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-4-15 BOLT - CLOSE TOLERANCE

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-4-20 BOLT

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

51B464-4-22 BOLT - CLOSE TOLERANCE

REVISION AG; Note Finish paragraph; See material specs; Note heat treat parameters

NAS1303-12 BOLT

Rockwell C, 36.0 min and 40.0 max overall; Material: Steep Comp E4340 or Steel Comp 8740 overall

28 April 2010

System

STRUCTURAL

28 April 2010

System

STRUCTURAL

28 April 2010

System

STRUCTURAL

28 April 2010

System

STRUCTURAL

FLIGHT CONTROLS

28 April 2010

System

FLIGHT CONTROLS

STRUCTURAL

28 April 2010

System

FLIGHT CONTROLS

LANDING GEAR

CSI List for -33 Wing

File details come from the government source that posted it. Updated Dec 31, 2023.