SOW_Attachment_A_--_Contract_Data_Requirements_List.pdf

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

Form Approved 0MB No. 0704-0 188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, includino suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports 0701-0188), 121S Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of aw no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT RE1URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY: MGMT

TOP TM OTHER _______________________________

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208 -19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Management Plan

3. SUBTITLE

Integrated Master Plan (IMP)

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-80004A/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.1.1

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DD 250 REQ

LT

9. 01ST STATEMENT

REQUIRED

C

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

B. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SEE BLK 16

Draft Final o

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK 4: Requirements Paragraph: 2 c - FORMAT: CHANGE TO:

Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

3. BLKs 7, 8, 10, 11, 12, 13, 14: The contractor shall submit Letter ofTransmittal and the Integrated Master Plan (IMP) to the U.S. Government T-38 Wing PgM.

Mgr. and the U.S. Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovarus.af.mil

2. les1ie.trice@us.af.mil

b. Integrated Master Plan (IlVIP)

1. yoly.tovarus.af.mil

c. The contractor shall submit the Integrated Master Plan (IMP) NLT ninety

(90) calendar days after contract award.

d. Subsequent Updates to the Integrated Master Plan (IMP) shall be submitted NLT the fifth (5th) of the month throughout the life of the contract.

e. The U.S. Government will have ten (10) Government working days after receipt to review and reply with approval or disapproval of the Integrated Master Plan (IMP).

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

416 SCMS/ 1

GUMBA

6071 Gum LN

Attn: T-38 Wing

PgM. Mgr.

Hill AFB, UT 84056-5 826

SEE BLK 16

AFMC OL_H/

PZAC

6050 Gum LN Attn: T-38 Wing ContractingOfficer Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16

15.TOTAL 0 1 0

G. PREPARED BY__

Nila Dagsen (Contractor Da a a ger

H. DATE

4 Feb 2019

I. APPROVED BY

Yoly Tovar (T- ing gM. Mgr.)

J. DATE

4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

0.00

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page 1 of 2 Pages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP TM OTHER

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

a. DISTRIBUTION STATEMENT 'C': Distribution authorized to U.S. Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill

AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate JAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DD FORM 1423-1, FEB 2001 Page 2 of 2 Pages

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of mforrnation. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washinqton Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT RE1URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block S.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TOP TM OTHER

MGMT

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208 -19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A002

2. TITLE OF DATA ITEM

Integrated Program Management Report (IPMR)

3. SUBTITLE

Integrated Master Schedule (IMS)

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81861A/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.1.1

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DO 250 REQ

LT

9. 01ST STATEMENT

REQUIRED

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE I3LK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft Final

Reg Repro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK4:

a. Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

b, Only Paragraphs 3.7.1.3.1 and 3.7.1.3.2 of the Data Item Description (DID) DI-81861A apply.

3. BLKs 7, 8, 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal and the Integrated Master Schedule (EVES) to the U.S. Government T-38 Wing PgM. Mgr. and the U.S. Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovarus.af.mil

2. leslie.trice@us.af.mil

b. Integrated Master Schedule (IMS)

1. yoly.tovar@us.afmil

c. The contractor shall submit the initial Integrated Master Schedule (IMS) NLT ninety (90) calendar days after contract award.

d. Subsequent Updates to the Integrated Master Schedule (IMS) shall be submitted NLT the fifth (5th) of the month throughout the life of the contract.

e. The U.S. Government will have ten (10) Government working days after receipt to review and reply with approval or disapproval of the Integrated Master Schedule (IMS).

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

416 SCMS/ 1

GUMBA

6071 Gum LN Attn: T-38 Wing

PgM. Mgr.

Hill AFB, UT 84056-5 826

SEE BLK 16

AFMC OL_H/

PZAC

6050 GumLN Attn: T-38 Wing ContractingOfficer Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16

15.TOTAL 0 1 0

G. PREPARED BY2

Nila Dagsen (Contractor Data )

H. DATE

4 Feb 2019

I. APPROVED BY _4_1

Yoly Tovar (T-'Ving . Mgr.)

J.DATE

4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

MGMT

0004 A TOP TM OTHER

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S. Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill

AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate JAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Form Approved 0MB No. 0704-0188

The public reporting burden for thio collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarGing this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports j0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 9MB control number. Please DO NOT REtURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY: M

TOP TM OTHER

MG T

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208-19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A003

2. TITLE OF DATA ITEM

Small Business Subcontractor Report

3. SUBTITLE

Small Business Utilization Reporting

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-81642/T

5. CONTRACT REFERENCE

SEE BLK 16

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

C

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

'I AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SEE BLK 16

Draft

Final

Repro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK 4: Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

3. BLKS: SOWParagraphs:2.1.2 2.1.2.land2.1.2.1.1

4. BLKs 7 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal to the U.S. Government T-38 Wing PgM. Mgr. and the U.S. Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovarus.afmil

2. leslie.trice@us.af.mil

b. 4. If applicable, the contractor shall submit the initial Small Business Utilization Report NLT one-hundred-eighty (180) calendar days after contract award.

c. Subsequent reports are due yearly every three-hundred-sixty-five (365) calendar days after initial report submission.

c. The reports shall be submitted electronically to the Electronic Subcontracting Reporting System (eSRS).

d. The U.S. Government will have ten (10) Government working days after receipt to review and reply with approval or disapproval.

5. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

416 SCMS/ 1

GUMBA

6071 Gum LN Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

SEE BLK 16

AFMCOL_H/

PZAC

6050 Gum LN Attn: T-38 Wing ContractingOfficer Hill AFB, UT

84056-5820 (LT Only)

SEEBLK 16

15.TOTAL 0 1 0

G. PREPARED BY

Nila Dagsen

H. DATE

4 Feb 2019

I. APPROVED BY/' -

Yoly Tovar

J. DATE

4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. Page of 2 Pages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TOP TM OTHER

MGMT

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S. Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill

AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate JAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, inc1uding suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law no person shall be subject to any penalty for fatling to comply with a collection of information if !t does not display a currently valid 0MB control number. Please DO NOT RE1'URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/FR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

MGMT

TDP TM OTHER ___________________________

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208 -19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A004

2. TITLE OF DATA ITEM

Contractor's Progress, Status & Management Report

3. SUBTITLE

Monthly Status Report

4. AUTHORITY (Data Acquisit/on Document No.)

DI-MGMT-80227/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.1.3

6. REQUIRING OFFICE

416 SCMS/GT.JMBA

7. DO 250 REQ

LT

9. DIST STATEMENT

REQUIRED

e'

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft

Final

Reg Repro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK 4: Paragraph: 10.2 - FORMAT: CHANGE TO:

Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

3. BLKs 7, 8, 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal and the Monthly Status Report to U.S. Government T-38 Wing PgM. Mgr. and the U.S. Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses: via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovarus.af.mil

2. les1ie.trice@us.af.mil

b. Monthly Status Report

1. yoly.tovarus.af.mil

c. The contractor shall submit the initial Monthly Status Report NLT one-hundred-twenty (120) calendar days after contract award.

d. Subsequent Monthly Status Reports shall be submitted NLT the fifth (5th) of the month for the throughout the life of the contract.

e. The Government will have ten (10) Government working days after receipt to review and reply with approval or disapproval of the Monthly Status Report.

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

416 SCMS/

GUMBA

6071 Gum LN

Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

SEE BLK 16

AFMC OL_H/

PZAC

6050 Gum LN Attn: T-38 Wing

ContractingOfficer

Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16

G. PREPARED B -

Nila Dagsen

H. DATE

4 Feb 2019

I. APPROVED BY

Yoly Tovar (T7Wing jM.Mgr.) 4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

G

0004 A TOP TM OTHER

M MT

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S. Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill

AFB, UT 84056-5 826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate lAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Form Approved 0MB No. 0704-0 188

The public reporting burden for this collection of information io estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect ot this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports 0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington. VA 22202-4302. Respondents should be aware that notwithstanding any other provision of am no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT RE1'URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TOP TM OTHER

ADMN

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208-19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A005

2. TITLE OF DATA ITEM

Conference Agenda

3. SUBTITLE

Agenda

4. AUTHORITY (Data Acquisition Document No.)

DI-ADMN-81249B/T

5. CONTRACT REFERENCE

SEE BLK 16

6. REQUIRING OFFICE

416 SCMS/GTJMBA

7. 00 250 REQ

LT

9. 01ST STATEMENT

REQUIRED

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

N/A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft

Final

Reg Repro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK 4: Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

3. BLK5: SOWParagraphs: 2.1.4.1,2.1.4.2,2.1.4.3and2.2.3.1

4. BLKs 7, 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal and the Agenda to the U.S. Government T-38 Wing PgM. Mgr. and the u.S.

Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovar@us.af.mil

2. leslie.trice@us.af.mil

b. Agenda

1. yoly.tovarus.af.mil

c. The contractor shall submit Conference Agenda(s) NLT five (5) Government working days prior to any and all meetings/reviews.

d. Presentation materials (if applicable) shall be submitted NLT five (5) Government working days prior to any and all meetings/reviews.

5. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S.

Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill AFB, UT 84056-5826).

416 SCMS/ 1

GTJMBA

6071 Gum LN Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

SEE BLK 16

0L_H/

6050 Gum LN Attn: T-38 Wing ContractingOfficer Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16 liii

G. PREPARED B - 1')

Nila Dagsen (tor

H. DATE

4 Feb 2019

I. APPROVED BYJA

Yoly Tovar (TTingp. Mgi)

Ti5ATE.

4Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP TM OTHER

ADMN

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208 -19-R-0001

16. REMARKS (Continued)

EXPORT CONTROL WARNiNG: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate lAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DD FORM 1423-1. FEB 2001 Page 2 of 2 Pages

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewinfl instructions searching existing data sources, oathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect ol this collection of information, inoludino suggestions for reducing the burden, to Department of Defense, Washinqton Headquarters Services, Directorate for Information Operations and Reports (0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT REfURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

ADMN

TOP TM OTHER

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208-19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A006

2. TITLE OF DATA ITEM

Report, Record of Meeting/Minutes

3. SUBTITLE

Meeting Minutes

4. AUTHORITY (Data Acquisition Document No.)

DI-ADMN-81505T

5. CONTRACT REFERENCE

SEE BLK 16

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DO 250 REQ

LT

9. DIST STATEMENT

REQUIRED

r

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8.APP CODE

N/A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft Final

Reg Repro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK 4: Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

3. BLK5: SOWParagraphs: 2.1.4.1 2.1.4.2 2.1.4.3and2.2.3.1

4. BLKs 7, 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal and the Agenda to the U.S. Government T-38 Wing PgM. Mgr. and the U.S.

Government T-3 8 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovar@us.af.mil

2. leslie.trice@us.afmil

b. Meeting Minutes

1. yoly.tovarus.af.mil

c. The contractor shall submit Meeting Minutes NLT five (5) working days after any and all meetings/reviews.

5. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S.

Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

416 SCMS/ 1

GUMBA

6071 Gum LN Attn: T-38 Wing

PgM. Mgr.

Hill AFB, UT 84056-5826

SEE BLK 16

AFMCOLJI/

PZAC

6050 Gum LN Attn: T-38 Wing

ContractingOfficer

Hill AFB, UT

84056-5 820 (LT Only)

SEE BLK 16

15.TOTAL 0 1 0

G. PREPARED BY-74 '1

Nila Dagsen

H. DATE

4 Feb 2019

I. APPROVED BY2 -

Yoly Tovar ( Win gM. Mgr.)

J.DATE

4Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TOP TM OTHER

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate JAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DD FORM 1423-1, FEB 2001 Page 2 ot 2 Pages

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including, suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Dperations and Reports 0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of aw no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT REtURN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Bloclt E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TOP TM OTHER

0. SYSTEM/ITEM

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208 -19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A007

2. TITLE OF DATA ITEM

Product Drawings/Models and Associated Lists

3. SUBTITLE

Digital Representations of the Master Tooling

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-8 1000E/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.2.1.2.2

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

B

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SEE BLK 16

Draft Final

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK4:

1. Tailor D1-SESS-81000E as follows:

a. Use/relationship: 3D Digital Models shall provide sufficient engineering data to support Engineering Analysis.

2. Requirements:

a. Paragraph 2 (General): 3D Digital Models shall:

(1). Reflect the end product at its current level of design maturity.

3. Paragraph 3. (Format): 3D Digital Models shall be in the format and media as specified on this CDRL and on the TDP Option Selection Worksheet incorporated into this CDRL and contract.

(a). The 3D Digital Models shall be the delivered in native 3D CAD format of Siemens NX 11 (or version currently utilized by the U.S.

Government when contract is awarded). These formats shall be capable of being exported to the ISO 10303 STEP format.

4. Paragraph 4. (Content): 3D Models shall be lAW MIL-STD-31000A, ASME Y14.100-2013, including Appendices B, C, D, E and F, ASME Y14.41 and all other ASME Y14 series standards as applicable.

5. Paragraph 5. (Item definition): All parameters required to define each unit, assembly, subassembly, part or material shall be presented on the applicable 3D Digital Model.

6. Paragraph 6. (CAGE Code and document numbers): 3D Digital Models shall be identified with the contractor's CAGE code and contractor document numbers as specified on this CDRL and on the TDP Option Selection Worksheet incorporated into this CDRL and contract.

7. Paragraph 7. (Selection of Drawings): DELETE Paragraphs 7, and 7.1 through 7.3.

416 SCMS/ 1

GUMBA

6071 Guii LN Attn: T-38 Wing

PgM. Mgr.

Hill AFB, UT 84056-5826

SEEBLK16

AFMC OL H/

PZAC

6050 Gum LN Attn: T-38 Wing ContractingOfficer

Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16

G. PREPARED BY ()

Nila Dagsen (Contractor DatManger)

J H. DATE

4 Feb 2019

I. APPROVED BY

Yoly Tovar (T-3ing M. gr.)

!JDATE

4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

DO FORM 14Z3-1, I-Lb 2001 I-'KEVIUU L)IIIUN IVIAY L UbLU. vagei OT'E rages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP K TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208 -19-R-0001

16. REMARKS (Continued)

3. BLKs 7,8,10,11,12,13,14:

a. The contractor shall submit Letter of Transmittal to the U.S. Government T-38 Wing PgM. Mgr. and the U.S. Government

T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

Letter of Transmittal (LT) ONLY

1. yoly.tovar@us.af.mil

2. leslie.trice@us.af.mil

b. The 3D Models shall be delivered on DVD via Fed-Ex to the following address:

1. 416 SCMS/GUMBA

6071 GumLN Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

2. A shipping list shall be provided with each shipment of 3D Digital Models. This shipping list shall identify, in alphanumeric document number order, each 3D Model file including the file name for each 3D Digital Model file submitted.

c. The contractor shall affix a permanent (non-removable) label on every D\TD submittal which shall list the following information:

(1) Title of Submittal: Digital Representations of the Master Tooling

(2) Contract #:

(3) Exhibit #: A

(3) CDRL Exhibit number: A007

(4) Distribution Statement, Data Rights Legend, Export Control Warning and Destruction Notice lAW the direction in this

CDRL.

d. The contractor shall submit the Digital Representations of the Master Tooling NLT three-hundred-sixty-five (365) calendar days after contract award.

e. The U.S. Government will have thirty (30) Government working days after receipt to review and reply with approval or disapproval of the submittal.

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location JAW DoDI 5230.24.

The contractor, JAW with DFARS 252.227 shall place the following LIMITED Rights Legend directly above the distribution statement in a conspicuous location on the first sheet of each Drawing and Associated list:

LIMITED RIGHTS

Contract No.:

Contractor Name:

Contractor Address:

a. DISTRIBUTION STATEMENT: "B": Distribution authorized to U.S. Government agencies only (PROPRIETARY DATA) determined (24 July 2018). Other requests shall be referred to (416 SCMS/GUIMBA, Hill AFB, UT 84056-5826).

EXPORT CONTROL WARNiNG: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate lAW provisions of DoD Directive 5230.25.

LIL) 1-0KM 14Z-1, I-1b 2001 Page 2 of 4 Pages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP X TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208 -19-R-0001

16. REMARKS (Continued)

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NISPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

DD FORM 1423-1, FEB 2001 -'age 3 at 4 'ages

(GUB -1 8-067)

A. CONTRACT LINE ITEM NO.: 0004

D. SYSTEM/ITEM: T-38 Wing Assembly

B. EXHIBIT: A C. CATEGORY: TDP

F. CONTRACT/PR NO.: FA8208-19-R-0001 F. CONTRACTOR

MIL-STD-3 1000

TDP OPTION SELECTION WORKSHEET

SYSTEM: T-38 Wing Assembly DATE PREPARED: 4 Feb 2019

A. CONTRACT NO. B. EXHIBIT/ATtACHMENT NO. C. CLIN D. CDRL DATA

FA8208-19-R-0001 A 0004 ITEM NO(s).

1. TDP Level (X and complete as applicable.)

A. LI CONCEPTUAL LEVEL B. REMARKS:

LI DEVELOPMENTAL LEVEL The contractor shall provide 3D Digital Medals using the existing Drawing numbers and Cage Code provided to

L81 PRODUCTION LEVEL them by the U.S. Government

2. TYPE AND FORMAT (X all that apply and complete as applicable.)

A B Seimens ax 11 (or version currently utilized by the U.S.

Gzvarnmznt when contract Is awarded). The formats shall be

LI NATIVE CAD (SPECIFY TYPE) czpabls of being ezpzoted to the ISO 10303

LI TYPE 2D: 2D DRAWINGS LI ISO 10303 STEP FORMAT (Specify STEP PROTOCOL AP203, AP 214 etc.)

TYPE D 3D MODELS ONLY LI ISO 32000 PORTABLE DOCUMENT FORMAT

LI TYPE 3D: 3D MODELS WITH LI OTHER ELECTRONIC FORMAT (SPECIFY TYPE)

ASSOCIATED 2D DRAWINGS LI HARDCOPY

REMARKS:

3. CAGE Code AND DOCUMENT A. IJ CONTRACTOR CAGE AND DOCUMENT NUMBERS D. To Be Assigned NUMBERS LI GOVERNMENT CAGE (COMPLETE 3B & 3C OR 3D) By:

B. USE CAGE CODE: C. USE DOCUMENT NUMBERS:

4. DRAWING FORMATS (X one and complete as applicable)

El CONTRACTOR FORMAT.

LI GOVERNMENT FORMAT.

REMARKS:

5. TDP ELEMENTS REQUIRED (X all that apply)

LI ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR - OR THE FOLLOWING ARE REQUIRED:

LI CONCEPTUAL DRAWINGS/MODELS AND ASSOCIATED LISTS

LI DEVELOPMENTAL DESIGN DRAWINGS/MODELS AND ASSOCIATED LISTS

E PRODUCT DRAWINGS/MODELS AND ASSOCIATED LISTS

LI COMMERCIAL DRAWINGS/MODELS AND ASSOCIATED LISTS

LI QUALITY ASSURANCE PROVISIONS

LI SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS/MODELS AND ASSOCIATED LISTS

LI SPECIAL TOOLING (ST) DRAWINGS/MODELS AND ASSOCIATED LISTS

LI SPECIFICATIONS

LI SOFT\NARE DOCUMENTATION

LI SPECIAL PACKAGING INSTRUCTIONS (SPI) DRAWINGS/MODELS AND ASSOCIATED LISTS

6. ASSOCIATED LIST (X and complete as applicable)

LI A. PARTS LIST (X ONE) LI (1) INTEGRAL

LI (2) SEPARATE

LI B. DATA LISTS (X ONE) LI (1) NOT REQUIRED LI (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) LI C. INDEX LISTS (X ONE) LI (1) NOT REQUIRED LI (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) LI D. WIRING LISTS (X ONE) LI (1) NOT REQUIRED LI (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) LI E. INDENTURED DATA LISTS (X ONE) LI (1) NOT REQUIRED LI (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY) LI F. APPLICATION LISTS (X ONE) LI (1) NOT REQUIRED LI (2) REQUIRED (SPECIFY LEVELS OF ASSEMBLY)

7. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

Eil ASME Y14.100 LI ASME Y14.24 TYPES AND APPLICATIONS OF

LI OTHER STANDARDS

ENGINEERING DRAWING ENGINEERING DRAWINGS APPLY AS

PRACTICES LI ASME Y14.34 ASSOCIATED LIST DESCRIBED:

WITH APPENDICES: LI ASME Y14.35M REVISION OF ENGINEERING

ESI B ES! C ESI D ES! E DRAWINGS AND ASSOCIATED LIST

5j ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA COMPANY STANDARDSand Appendice: F PRACTICES LI ASME Y14.5 DIMENSIONING AND TOLERANCING PERMITTED LIYES lNO

8. OTHER TAILORING (Attach additional sheets as necessary)

FIGURE 1: TDP Option Selection Worksheet

Page 4 of4

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports 0701-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of aw no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT RE1'URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed ri Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER

MGMT

D. SYSTEM/ITEM (GUB-18-067)

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208-19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A008

2. TITLE OF DATA ITEM

Management Plan

3. SUBTITLE

Legacy Data Conversion Plan

4. AUTHORITY (Data Acquisition Document No.)

DI-MGMT-80004A/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.2.1.2.1

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DO 250 REQ

LT

9. 01ST STATEMENT

REQUIRED

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

Draft Final qeg

Ftepro

16. REMARKS

1. NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK4:

a. Requirements Paragraph: 2 c - FORMAT: CHANGE TO:

Contractor format is acceptable using the current products compatible with the U.S. Air Force or Portable Document Format (PDF).

b. Only Requirements Paragraphs 1 through 3.1 and Paragraph 3.5 of the DID apply.

3. BLKs 7, 8, 10, 11, 12, 13, 14: The contractor shall submit Letter of Transmittal and the Legacy Data Conversion Plan to the U.S. Government T-38 Wing PgM.

Mgr. and the U.S. Government T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

a. Letter of Transmittal (LT) ONLY

1. yoly.tovarus.af.mi1

2. les1ie.trice@us.af.mil

b. Legacy Data Conversion Plan

1. yoly.tovar@us.af.mil

c. The contractor shall submit the Legacy Data Conversion Plan NLT one-hundred-twenty (120) calendar days after contract award.

d. The U.S. Government will have ten (10) Government working days after receipt to review and reply with approval or disapproval of the Legacy Data Conversion Plan.

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location.

416 SCMS/ 1

GUMBA

6071 Gum LN

Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

SEEBLK16

AFMC OL HI

PZAC

6050 Gum LN Attn: T-38 Wing ContractmgOfficer

Hill AFB, UT

84056-5820 (LT Only)

SEE BLK 16

G. PREPARED BY7fY Nila Dagsen (Contractor Data Mar)

H. DATE

4 Feb 2019

I. APPROVED BY

Yoly Tovar (T)\Ting Mgr.) 4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

1)0 I-OHM 14-1, I-LL ZUO1 I-'KEVIUUi LL)IIIUN IVIAY b1 ULU. rage! oiz rages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP TM OTHER MGMT

D. SYSTEM/ITEM (GUB-18-067) E. CONTRACT/PR NO. F. CONTRACTOR

1-38 Wing Assembly FA8208 -19-R-0001

16. REMARKS (Continued)

a. DISTRIBUTION STATEMENT "C": Distribution authorized to U.S. Government agencies and their contractors (Administration or Operational Use) (24 July 2018). Other requests for this document shall be referred to (416 SCMS/GUMBA, Hill

AFB, UT 84056-5826).

EXPORT CONTROL WARNING: All technical documents/data (printed, digital/electronic) that are determined to contain export-controlled technical data, shall be marked with the following statement:

b. EXPORT CONTROL WARNING: This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Administration Act of 1979 (Title 50, U.S.C., App. 2401 et seq.), as amended. Violations of these export laws are subject to severe criminal penalties. Disseminate lAW provisions of DoD Directive 5230.25.

c. DESTRUCTION NOTICE: For classified documents, follow the procedures, in DoD 5220.22-M, National Industrial Security Program Operating Manual (NTSPOM), Section 5-705, or DoD 5200.1-R, Information Security Program Chapter VI. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Form Approved 0MB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 10 hours per response, including the time for reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding thit burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0701.0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law no oerson shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid 0MB control number. Please DO NOT RE1URN your form to the above address. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No.

listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER ___________________________

D. SYSTEM/ITEM

T-38 Wing Assembly

E. CONTRACT/PR NO.

FA8208 -19-R-0001

F. CONTRACTOR

1. DATA ITEM NO.

A009

2. TITLE OF DATA ITEM

Product Drawings/Models and Associated Lists

3. SUBTITLE

Digital Representations of the -33 Wing

4. AUTHORITY (Data Acquisition Document No.)

DI-SESS-8 1000E/T

5. CONTRACT REFERENCE

SOW Paragraph: 2.2.1.2.2

6. REQUIRING OFFICE

416 SCMS/GUMBA

7. DD 250 REQ

LT

9. DIST STATEMENT

REQUIRED

1.)

10. FREQUENCY

SEE BLK 16

12. DATE OF FIRST SUBMISSION

SEE BLK 16

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

8. APP CODE

A

11. AS OF DATE

SEE BLK 16

13. DATE OF SUBSEQUENT

SUBMISSION

SEE BLK 16

0 ft Final

Reg

Repro

16. REMARKS

NOTE:

a. Changes to office symbols and/or e-mail addresses when necessary shall be made by letter through the Government CO/ACO without further revision to this CDRL.

b. All data deliveries shall be submitted in the English language.

2. BLK4:,

1. Tailor Dl-SESS-81000E as follows:

a. Use/relationship: 3D Digital Models shall provide sufficient engineering data to support Engineering Analysis.

2. Requirements:

a. Paragraph 2 (General): 3D Digital Models shall:

(1). Reflect the end product at its current level of design maturity.

3. Paragraph 3. (Format): 3D Digital Models shall be in the format and media as specified on this CDRL and on the TDP Option Selection Worksheet incorporated into this CDRL and contract.

(a). The 3D Digital Models shall be the delivered in native 3D CAD format of Siemens NX 11 (or version currently utilized by the U.S.

Government when contract is awarded). These formats shall be capable of being exported to the ISO 10303 STEP format.

4. Paragraph 4. (Content): 3D Models shall be JAW MIL-STD-31000A, ASME Y14.100-2013, including Appendices B, C, D, E and F, ASME Y14.41 and all other ASME Y14 series standards as applicable.

5. Paragraph 5. (Item definition): All parameters required to define each unit, assembly, subassembly, part or material shall be presented on the applicable 3D Digital Model.

6. Paragraph 6. (CAGE Code and document numbers): 3D Digital Models shall be identified with the contractor's CAGE code and contractor document numbers as specified on this CDRL and on the TDP Option Selection Worksheet incorporated into this CDRL and contract.

7. Paragraph 7. (Selection of Drawings): DELETE Paragraphs 7, and 7.1 through 7.3.

416 SCMS/ 1

GUMBA

6071 Gum LN

Attn: T-3 8 Wing

PgM. Mgr.

Hill AFB, UT 84056-5826

SEEBLK16

AFMC OL H/

PZAC

6050 Gum LN Attn: T-38 Wing ContractingOfficer

Hill AFB, UT 84056-5820 (LT Only)

SEE BLK 16

-i.---G. PREPARED BY7 (l Nila Dagsen (Contractor Daar)

H. DATE

4 Feb 2019

I. APPROVED BY

Yoly Tovar (T/ Wi'PgM.

1TTL

Mgr.) 4 Feb 2019

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED. F'age! 0T4 Iages

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

0004 A TDP K TM OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

T-38 Wing Assembly FA8208-19-R-0001

16. REMARKS (Continued)

3. BLKs7, 8,10,11,12,13,14:

a. The contractor shall submit Letter of Transmittal to the U.S. Government T-38 Wing PgM. Mgr. and the U.S. Government

T-38 Wing Contracting Officer via e-mail to the following e-mail addresses:

Letter of Transmittal (LT) ONLY

1. yoly.tovar@us.af.mil

2. leslie.trice@us.af.mil

b. The 3D Models shall be delivered on DVD via Fed-Ex to the following address:

1. 416 SCMS/GUMBA

6071 GumLN Attn: T-38 Wing PgM. Mgr.

Hill AFB, UT 84056-5826

2. A shipping list shall be provided with each shipment of 3D Digital Models. This shipping list shall identif', in alphanumeric document number order, each 3D Model file including the file name for each 3D Digital Model file submitted.

c. The contractor shall affix a permanent (non-removable) label on every DVD submittal which shall list the following information:

(1) Title of Submittal: Digital Representations of the -33 Wing

(2) Contract#:

(3) Exhibit #: A

(3) CDRL Exhibit number: A009

(4) Distribution Statement, Data Rights Legend, Export Control Warning and Destruction Notice JAW the direction in this

CDRL.

d. The contractor shall submit the Digital Representations of the -33 Wing NLT three-hundred-sixty-five (365) calendar days after contract award.

e. The U.S. Government will have thirty (30) Government working days after receipt to review and reply with approval or disapproval of the submittal.

4. BLK 9: The Distribution Statement, Export Control Warning and Destruction Notice shall be placed on the first sheet of each document and be located in a conspicuous location JAW DoDI 5230.24.

The contractor, JAW with DFARS 252.227 shall place the following LIMITED Rights Legend directly above the distribution statement in a conspicuous location on the first sheet of each Drawing and Associated list:

LIMITED RIGHTS

Co…