Questions and Responses 005.doc

Questions and Responses 005 Solicitation No. FA5004-09-R-C001

QUESTIONS AND RESPONSES

FOR

BASE ROOFING IDIQ

AT

EIELSON AIR FORCE BASE, ALASKA

SOLICITATION NO. FA5004-09-R-C001

It shall be noted to all interested parties that the following questions have been received in writing regarding the subject acquisition. Responses to these questions are given below.

As a reminder, it is the responsibility of all Interested Parties to review this website (http://www.fedbizopps.gov) frequently for any updates and/or amendments to any and all subject documents.

Question 1: Line Item 0001CJ - Install metal flashing, expansion joint, etc in accordance with MFG recommendations and procedures, seems to cover all metal flashing. For the most part the sheet metal flashings are 24 Gauge IAW Specification Section 07650. However both Copings and Expansion Joints are 20 Gauge (Questions_and_Responses_002.doc) 20 Gauge Pre-finished sheet metal is a custom item with a minimum quantity of approximately 4,000 SF per order. There will be a huge discrepancy in costs between 20 gauge and 24 gauge. Is there a possibility of having one line item for 20 Gauge Flashing and another Line item for 24 Gauge Flashing?

Response 1: See revisions to CLINS CLIN 0001CJ, 0001CK, 0001CL, and 0001CM.

Question 2: Specification 07311 Paragraph 7 calls for underlayment - 15# felt, 30# felt and Waterproof Underlayment. There is a line item for waterproof underlayment - 0001BW - Install ice and water shield. There is not a line item for 15# or 30# Felt. Is the intent to use waterproof underlayment exclusively?

Response 2: See revisions to CLINS 0001DO, and 0001DP.