Attachment_3_-_PCR_Appendices1.pdf

Appendix E - Mechanical Systems

SPECIFICATIONS

Elkay Weldbilt Stainless Steel 120" x 27-1/2" x 14" Floor Mount Triple Compartment Scullery Sink

Model(s) WNSF8372LR4

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 10062018 2222 Camden Court © 2018 Page 1 WNSF8372LR4 Oak Brook, IL 60523 WNSF8372LR4_spec.pdf

PRODUCT SPECIFICATIONS

Elkay Weldbilt Stainless Steel 120" x 27-1/2" x 14" Floor Mount, Triple Compartment Scullery Sink. Sink is manufactured from 14 gauge 304 Stainless Steel with a Buffed Satin finish, Center drain placement. Sinks supported by (4) 16 gauge stainless steel, 1-5/8” O.D. tubular legs with bullet shaped feet adjustable up to 1”.

Material: 304 Stainless Steel Finish: Buffed Satin Gauge: 14 Number of Bowls: 3 Sink Dimensions: 120" x 27-1/2" x 44" Bowl 1 Dimensions: 24" x 24" x 14" Bowl 2 Dimensions: 24" x 24" x 14" Bowl 3 Dimensions: 24" x 24" x 14" Drainboard Location: Left and Right Drainboard Size: 24 Backsplash Height: 8 Leg Type: Stainless Steel Drain Size: 3-1/2" (89mm) Drain Location: Center

*Options available if applicable **Drainboards over 25-1/2” wide furnished with one tubular leg.

***Drainboards over 48” wide furnished with two tubular legs.

Custom Options

□ Type 316 Stainless Steel Drain Location

□ Right Rear □ Left Rear

□ Center □ Center Rear Overflow Location

□ Front □ Left

□ Rear □ Right Alternate Punching

□ Faucet Model: □ Punch Required:

Sink Size

□ Bowl Width: □ Drainboard Width:

□ Bowl Depth: □ Backsplash Height:

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ASME A112.19.3/CSA B45.4

BUY AMERICAN ACT

NSF 2

Clean and Care Manual (PDF) Limited Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

S-2

Elkay Weldbilt Stainless Steel 120" x 27-1/2" x 14" Floor Mount Triple Compartment Scullery Sink

Model(s) WNSF8372LR4

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 10062018 2222 Camden Court © 2018 Page 2 WNSF8372LR4 Oak Brook, IL 60523 WNSF8372LR4_spec.pdf

Elkay 8" Centerset Wall Mount Faucet 44in Flexible Hose with

1.2 GPM Spray Head + 12in Arc Tube Spout 2in Lever Handles

Model(s) LK943AF12LC

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 09182018 2222 Camden Court © 2018 Page 1 LK943AF12LC Oak Brook, IL 60523 LK943AF12LC_spec.pdf

PRODUCT SPECIFICATIONS

Elkay 8" Centerset Wall Mount Faucet 44in Flexible Hose with 1.2 GPM Spray Head + 12in Arc Tube Spout 2in Lever Handles. Faucet has a flow rate of 1.5 GPM, and is made of Chrome Plated Brass material, with a Quarter Turn Ceramic Disc valve. Faucet requires 2 faucet holes.

Mounting Type: Wall Mount Special Features: Low Flow

Solid Brass Construction Spout swing restriction pin

Spray Type: Pre Rinse Finish: Chrome (CR) Handle Type: Lever Handle Spout Reach: 30" Spout Height: 41-1/8" Hole Drillings: 2 Material: Chrome Plated Brass Valve Type: Quarter Turn Ceramic Disc Valve Connection: 1/2"-14 NPT Flow Rate: 1.5 GPM Faucet Hole Spread: 8 Spout Swing Rotation: 360° Spout Type: Flexible Spout Special Note: 1.2 GPM spray head

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ASME A112.18.1/CSA B125.1

NSF 61

NSF 372 (lead free)

Clean and Care Manual (PDF) Installation Instructions (PDF) Limited Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:

Elkay 8" Centerset Wall Mount Faucet 44in Flexible Hose with

1.2 GPM Spray Head + 12in Arc Tube Spout 2in Lever Handles

Model(s) LK943AF12LC

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 09182018 2222 Camden Court © 2018 Page 2 LK943AF12LC Oak Brook, IL 60523 LK943AF12LC_spec.pdf

InSinkErator is a business unit of Emerson Electric Co.

The Emerson logo is a trademark and a service mark of Emerson Electric Co.

4700 21st STREET

RACINE, WI 53406

TEL: 800-845-8345

FAX: 262 554-3620

www.insinkerator.com/foodservice

InSinkErator ©2016

PROJECT: ITEM NO.:

SS SERIES FOOD WASTE DISPOSERS

Form No. F506-16J-95-85

A complete collection of our product drawings is available for download at the InSinkErator Revit/CAD Library, which can be found at www.insinkerator.com/foodservice. Product information is also accessible on The KCL CADalog. More information is available from KCL at www.kclcad.com.

SS-SERIES

• Whether you serve 25 or 2,500 people, there is an InSinkErator disposer that’s designed for your operation. From the small-capacity SS-100™ model to our large-capacity SS-1000™ workhorse, InSinkErator disposers deliver superior performance, quiet operation, maximum energy efficiency, and reliable service.

SYSTEM OVERVIEW

• Stainless steel and chrome-plated finish

• Corrosion-resistant, stainless steel grind chamber

• Heavy-duty induction motor with built-in thermal overload protection

• Enclosure provides protection against outside moisture with controlled power air flow to cool motor

• Cast-nickel, chrome-alloy stationary and rotating shredding elements

• Double-tapered Timken roller bearings provide a shock-absorbing cushion

• Triple lip seal protects motor from water damage

• Secondary spring-loaded oil seal provides double protection against water and loss of grease

CLEANING

• Disposers are easy to clean and maintain

• Wipe down exterior surfaces with a wet cloth

• Use warm soapy water on the splashguard

PRODUCT FEATURES & SPECIFICATIONSNS

ON-SITE

PARTS & L ABOR

WARR ANT YYEAR

Food waste disposers are a hygienic and environmentally sustainable way to manage pre- and post-consumer scraps in a foodservice establishment. The SS Series disposers are ideal for heavy-duty applications such as restaurants, schools and universities, healthcare facilities and hospitals, and government facilities.

To determine the proper size disposer, use this recommended sizing chart.

Sizing recommendations are given in general terms; actual capacities vary depending on the volume and type of food waste.

SS-300 SS-300/

SS-500 SS-500 SS-500/

SS-1000

SS-500/

SS-1000

SS-200 SS-300 SS-300/

SS-500 SS-500 SS-500/

SS-1000

SS-100 SS-200 SS-300 SS-300/

SS-500 SS-1000

SS-100 SS-100 SS-200 SS-300 SS-300/

SS-500

Light Majority Fruits & Vegetables

Medium 50/50 Mixture

Heavy Majority Meats & Seafood

Food Waste Composition

Vo lu m e

Pr oc es se d / A pp lic at io n

Hi gh

Bu ffe t/ Ca fe te ria Go ve rn m en t

M ed iu m

Fu ll S er vi ce

Re st au ra nt

Lo w

Li m ite d

Se rv ice

Re st au ra nt /C af é/

Fa st

C as ua l

Commercial Disposer Sizing Chart

MODEL & HORSEPOWER/ELECTRICAL REQUIREMENTS (CHOOSE ONE)

WHAT'S INCLUDED

• Base disposer: 1 mounting gasket

• Disposer packages: 1 mounting/bowl assembly, 1 electrical control, 1 syphon breaker, 1 solenoid valve, and

1 flow control valve (the standard flow control valve will be sent with the unit unless the optional valve is specified)

Small Capacity Disposers

SS-100

1 HP

115/208-230V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, cULus

208-230/460V, 60 Hz, 3 Ph, 2.0/2.4/1.2 amps, cULus

120/208-240V, 60 Hz, 1 Ph, 11.6/5.1/5.7 amps, NOM

100/200-230V, 50/60 Hz, 1 Ph, 10.4/5.2/5.4 amps

Water Usage: 5 GPM (18.9 LPM) standard water flow 3 GPM (11.4 LPM) reduced water flow (optional)

Medium Capacity Disposer

SS-200

2 HP

115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, cULus

208-230/460V, 60 Hz, 3 Ph, 3.6/4.4/2.2 amps, cULus

115/208-230V, 60 Hz, 1 Ph, 17.4/7.7/8.7 amps, cULus, short body

208-230/460V, 60 Hz, 3 Ph, 3.6/4.4/2.2 amps, cULus, short body

208-240/460V, 60 Hz, 3 Ph, 3 Ph, 3.6/4.4/2.2 amps, NOM

Water Usage: 7 GPM (26.5 LPM) standard water flow 5 GPM (18.9 LPM) reduced water flow (optional)

Large Capacity Disposers

SS-300

3 HP

208-230/460V, 60 Hz, 3 Ph, 6.0/7.4/3.7 amps, CUL

208-230/460V, 60 Hz, 3 Ph, 6.0/7.4/3.7 amps, CUL, short body

208-230/460V, 60 Hz, 3 Ph, 7.0/8.6/3.7 amps, NOM

415V, 50 Hz, 3 Ph, 4.9 amps 220V, 50 Hz, 3 Ph, 7.2 amps 380V, 50/60 Hz, 3 Ph, 4.1/3.0 amps

Water Usage: 8 GPM (30.3 LPM) standard water flow 7 GPM (26.5 LPM) reduced water flow (optional)

SS-500

5 HP

208-230/460V, 60 Hz, 3 Ph, 8.6/8.8/4.4 amps, CUL

208-230/460V, 60 Hz, 3 Ph, 8.6/8.8/4.4 amps, CUL, short body

230/460V, 50 Hz, 3 Ph, 9.0/4.5 amps

415V, 50 Hz, 3 Ph, 6.0 amps 380V, 50 Hz, 3 Ph, 8.9 amps

Water Usage: 8 GPM (30.3 LPM) standard water flow 7 GPM (26.5 LPM) reduced water flow (optional)

SS-1000

10 HP

208-230/460V, 60 Hz, 3 Ph, 11.0/13.0/6.5 amps, CUL

208-230/460V, 60 Hz, 3 Ph, 11.0/13.0/6.5 amps, CUL, short body

Water Usage: 10 GPM (37.9 LPM) standard water flow

Sink Bowl Mounts

Bowl Size Kit Type

12" (304.8 mm) with one adjustable water nozzle

15" (381.0 mm) with one adjustable water nozzle

18" (457.2 mm) with two adjustable water nozzles

Type A Sink Bowl Assembly

• bowl

• water nozzle(s)

• bowl cover

• splash baffle

Type B Sink Bowl Assembly

• bowl

• water nozzle(s)

• silver guard

• splash baffle

Type C Sink Bowl Assembly

• bowl

• water nozzle(s)

• splash baffle

Sink Collar Mounts

#5 Sink Flange Kit for 3-1/2" – 4" (88.9 mm – 101.6 mm) sink opening (support legs are recommended)

#5 adaptors only available on small and medium capacity disposers.

#6 Collar Adaptor Kit for welding into trough, for 6-5/8" (168.3 mm) opening, includes splash baffle

#7 Collar Adaptor Kit for welding into sink, for 6-5/8" (168.3 mm) opening, includes splash baffle and stopper

DISPOSER MOUNTING ASSEMBLIES (CHOOSE ONE)

If mounting directly to a sink, use dimension chart below for adaptor height in place of InSinkErator bowl sink height.

IMPORTANT: #5 adaptors only available on small and medium capacity disposers.

Standard models shown. A short body model is available on medium and large capacity disposers. Short body models reduce overall height by 1" (25.4 mm) on medium capacity disposers and by 3" (76.2 mm) on large capacity disposers.

Bowl Mounts Flange O.D.

X

Work Table Hole

Y

Flange I.D.

Z

Height

12" (304.8 mm) 13-1/2" (342.9 mm) 12-1/4" (311.2 mm) 12" (304.8 mm) 6-1/2" (165.1 mm)

15" (381 mm) 16-1/2" (419.1 mm) 15-1/4" (387.4 mm) 15" (381.0 mm) 6-1/2" (165.1 mm)

18" (457.2 mm) 19-1/2" (495.3 mm) 18-1/4" (463.6 mm) 18" (457.2 mm) 6-1/2" (165.1 mm)

Collar Mounts X Y Z Height

#5 Fits Standard Sink Opening: 3-1/2" – 4" (88.9 mm – 101.6 mm) 2-3/4" (69.9 mm)

#6 7-13/16" (198.4 mm) 6-7/8" (174.6 mm) 6-5/8" (168.3 mm) 1-3/16" (30.2 mm)

#7 9-1/8" (231.8 mm) 7-7/8" (200.0 mm) 7-5/8" (193.7 mm) 2-1/16" (52.4 mm)

DISPOSER DIMENSIONS

Small Capacity Medium Capacity Large Capacity

ELECTRICAL CONTROLS (CHOOSE ONE)

Z

Y

6-5/8" (168.3 mm)

X

6-13/16" (173.0 mm)

4-7/8" (123.8 mm)

6-3/8" (161.9 mm)

1-1/2" (38.1 mm)

3-3/8" (85.7 mm)

6-1/2" (165.1 mm)

7-11/16" (195.3 mm)

17" (431.8 mm)

1 Phase

18-1/4" (463.55 mm)

3 Phase

EXTERNAL ELECTRICAL

CONNECTIONS

1/2-14 N.P.T.

WATER INLET

InSinkErator

BOWL SINK

6-13/16" (173.0 mm)

7-3/8" (187.3 mm)

7-3/4" (196.9 mm)

6-1/2" (165.1 mm)

InSinkErator

BOWL SINK

2-3/4" (69.9 mm)

18-7/16" (468.3 mm)

1 Phase

19-1/4" (488.95 mm)

3 Phase

EXTERNAL ELECTRICAL

CONNECTIONS

1/2-14 N.P.T.

WATER INLET

2" (50.8 mm) N.P.T.

WASTE

OUTLET

6-5/8" (168.3 mm)

Z

Y

X

6-5/8" (168.3 mm)

8-3/4" (222.3 mm)

8-3/4" (222.3 mm)

7-1/8" (181.0 mm)

6-1/2" (165.1 mm)

13" (330.2 mm)

InSinkErator

BOWL SINK

EXTERNAL ELECTRICAL

CONNECTIONS ADJUSTABLE

LEGS

3" (76.2 mm) N.P.T.

WASTE

OUTLET

1/2-14 N.P.T.

WATER INLET

Z

Y

X

23-3/4" (603.3 mm) to

31-1/8" (790.6 mm)

AS-101 Control Center

AquaSaver ® CC-101 Control Center CC-202 Control Center Manual Reverse Switch Manual Switch

• Automatically changes direction

• Stainless-steel housing

• Automatic shut-off with power loss

• Line disconnect

• Programmable post-flush

• Timed run

• Automatically regulates water flow to grind load

• Automatically changes direction

• Stainless-steel housing

• Automatic shut-off with power loss

• Line disconnect

• Programmable post-flush

• Timed run

• Automatically changes direction

• Stainless-steel housing

• Automatic shut-off with power loss

• Manually changes direction

• Stainless-steel housing

• Automatic shut-off with power loss

• Single direction

• Polycarbonate housing

• Automatic shut-off with power loss

TYPICAL INSTALLATION - BOWL

REPLACING A COMPETITIVE DISPOSER

• Refer to the Mounting Adaptor Guide or Video for adaptors that fit competitor sink bowls or cones.

• Have sink bowl/cone type with appropriate dimensions available when contacting Customer Service with questions or to place an order.

SAMPLE SPECIFICATION

InSinkErator Food Waste Disposer. Food waste grinding system with HP disposer, control panel.

Volts, Hz, Phase operation. disposer mount. Syphon breaker with 1/2" NPT connections; flow control valve; (1) 24V water solenoid.

PROJECT INFORMATION

Item Number: _______________________________________ Model Number: __________________________________________

Quantity: _______________________________________ Electrical

Manufacturer: _______________________________________

Requirements:

______________volts _________________phase

Project: _______________________________________ Dealer: __________________________________________

Address: _______________________________________ City/State/Zip: ___________________________________________

City/State/Zip: _______________________________________ Contact: ___________________________________________

Contact: _______________________________________ Phone: __________________________________________

Phone: _______________________________________

Installer: _______________________________________ Consultant: __________________________________________

Contact: _______________________________________ Contact: __________________________________________

Phone: _______________________________________ Phone: __________________________________________

InSinkErator

ES-WD-WD-L-SERIES-USA 1713 © 2017 Watts

Job Name ––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––

Job Location ––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––

Engineer ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––

USA: Tel: (800) 338-2581 • Fax: (828) 248-3929 • Watts.com

Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Watts.ca

Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Watts.com

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

NOTICE

The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer.

You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product.

Interceptor Catalog Number

Flow Rate

GPM

Grease Capacity

Lbs.

A Inlet & Outlet

B Base To Center

C Top To Center

D Length

E Width

F Height

WD-20-L 20 40 3"(76) 7-1/2"(191) 4-1/4"(108) 34-7/8"(886) 22-7/8"(581) 11-3/4"(305)

WD-35-L 35 70 4"(102) 7"(178) 4-1/2"(114) 40-7/8"(1038) 32-7/8"(835) 11-7/8"(302)

*WD-50-L 50 100 4"(102) 8-1/2"(216) 5-1/2"(140) 55"(1397) 33"(838) 14"(356)

*NOTE: Not PDI Certified

Tag:

SPECIFICATION: Watts Drainage WD-L Series PDI Certified recessed or floor mounted epoxy coated steel low-rough-in grease interceptor with gasketed epoxy coated steel skid-proof cover secured with hex head center bolt(s), removable baffle assembly, deep seal trap wtih cleanout, external cast iron flow control fitting, and no hub (standard) connections.

WD-L Series PDI Certified Low-Rough-In

Grease Interceptor

Flow Rate (Select One) Suffix Description

20 20 GPM

35 35 GPM

50 50 GPM

Options (Select One) Suffix Description

-B Sediment Bucket -E Extension -FC Flange & Clamp Device -O Inlet & Outlet other than

Standard Size -SS Stainless Steel -THD Threaded Connections

D (Length) x E (Width)

Flow Restrictor w/vent Connection

Inlet

A

Outlet

C

B

FF

Inlet Outlet

B

D (Length) x E (Width)

Flow Restrictor w/Vent

Connection

A

C

GI-1

Acid Resistant Enamel (ARE) Floor Sinks, Series 320-345 300 Series TAG

SANITARY FLOOR SINKS

Series 320-345

Series Number Description Outlet Size Outlet Type B C 320-Y02 12” Square Body Less Flange, 6” deep 2” No-Hub – 6” 320-Y03 12” Square Body Less Flange, 6” deep 3” No-Hub – 6” 320-Y04 12” Square Body Less Flange, 6” deep 4” No-Hub – 6” 330-Y02 12” Square Body Less Flange, 8” deep 2” No-Hub – 8” 330-Y03 12” Square Body Less Flange, 8” deep 3” No-Hub – 8” 330-Y04 12” Square Body Less Flange, 8” deep 4” No-Hub – 8” 340-Y02 12” Square Body Less Flange, 10” deep 2” No-Hub – 10” 340-Y03 12” Square Body Less Flange, 10” deep 3” No-Hub – 10” 340-Y04 12” Square Body Less Flange, 10” deep 4” No-Hub – 10” 325-Y02 12” Square Body with Flange, 6” deep 2” No-Hub 4-1/8” 6-1/2” 325-Y03 12” Square Body with Flange, 6” deep 3” No-Hub 4-1/8” 6-1/2” 325-Y04 12” Square Body with Flange, 6” deep 4” No-Hub 4-1/8” 6-1/2” 335-Y02 12” Square Body with Flange, 8” deep 2” No-Hub 6-1/8” 8-1/2” 335-Y03 12” Square Body with Flange, 8” deep 3” No-Hub 6-1/8” 8-1/2” 335-Y04 12” Square Body with Flange, 8” deep 4” No-Hub 6-1/8” 8-1/2” 345-Y02 12” Square Body with Flange, 10” deep 2” No-Hub 8-1/8” 10-1/2” 345-Y03 12” Square Body with Flange, 10” deep 3” No-Hub 8-1/8” 10-1/2” 345-Y04 12” Square Body with Flange, 10” deep 4” No-Hub 8-1/8” 10-1/2” Series Number Available Grates 320-10 Floor Sink (one piece) ARE Grate, full 320-11 Floor Sink (two piece) ARE Grate, 1/2 320-12 Floor Sink (one piece) ARE Grate, 1/2 320-13 Floor Sink (one piece) ARE Grate, 3/4

Product Description: oor sinks consist of a cast iron receptor (body) with a white acid resistant enamel interior and anti-splash dome strainer. Floor sinks are available with or

Featur rcelain enamel, acid resistant, coated cast iron body and grate

A reas

Series 320-340

Series 320-10

NOTE: Dimensional data is subject to manufacturing tolerances and change without notice.

Series 325-345

FS-1

Elkay Celebrity Stainless Steel 33" x 22" x 7-1/2" Equal Double Bowl Drop-in Sink

Model(s) PSR3322

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 08032018 2222 Camden Court © 2018 Page 1 PSR3322 Oak Brook, IL 60523 PSR3322_spec.pdf

PRODUCT SPECIFICATIONS

Elkay Celebrity Stainless Steel 33" x 22" x 7-1/2", Equal Double Bowl Drop-in Sink. Sink is manufactured from 20 gauge 304 Stainless Steel with a Brushed Satin finish, Center drain placement, and Bottom only pads.

Installation Type: Drop-in Material: 304 Stainless Steel Finish: Brushed Satin Gauge: 20 Sound Deadening: Bottom only pads Number of Bowls: 2 Sink Dimensions: 33" x 22" x 7-1/2" Bowl 1 Dimensions: 13-1/2" x 16" x 7-1/8" Bowl 2 Dimensions: 13-1/2" x 16" x 7-1/8" Drain Size: 3-1/2" (89mm) Drain Location: Center Minimum Cabinet Size: 36" Mounting Hardware: Part # 64090014 included for countertops up to 3/4" (19mm) thick Cutout Template #: 1000001189 Template is available for download at elkay.com Cutout Dimensions for Top Mount Installation:

32-3/8" x 21-3/8" (822mm x 543mm) with 1-1/2" (38mm) corner radius

Hole Drilling Configurations:

Installation Profile:

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure.

For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ASME A112.19.3/CSA B45.4

BUY AMERICAN ACT

Sinks are listed by IAPMO® as meeting the applicable requirements of the Uniform Plumbing Code®, International Plumbing Code®, and National Plumbing Code of Canada.

Clean and Care Manual (PDF) Installation Instructions (PDF) Limited Lifetime Warranty (PDF) Similar models are available with: N/A

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:_____________________________________________

S-1

Elkay Celebrity Stainless Steel 33" x 22" x 7-1/2" Equal Double Bowl Drop-in Sink

Model(s) PSR3322

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 08032018 2222 Camden Court © 2018 Page 2 PSR3322 Oak Brook, IL 60523 PSR3322_spec.pdf

OPTIONAL ACCESSORIES

Bottom Grid: LKWBG1316SS Cutting Board: CB1613, CB1713, CBS1316 Drain: LK99 Faucet: LKGT1041, LKGT2041 Hardware: LK364, LK463 Rinsing Basket: LKWRB1316SS Sinkmate: LKSMHSL Soap Dispenser: LKGT1054

Elkay Everyday Three Hole Deck Mount Kitchen Faucet with Lever Handle and Side Spray and Escutcheon Chrome

Model(s) LK1001CR

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 09182018 2222 Camden Court © 2018 Page 1 LK1001CR Oak Brook, IL 60523 LK1001CR_spec.pdf

PRODUCT SPECIFICATIONS

Elkay Everyday Three Hole Deck Mount Kitchen Faucet with Lever Handle and Side Spray and Escutcheon Chrome. Faucet has a flow rate of 1.5 GPM, and is made of Brass material, with a Ceramic Disc valve. Faucet requires 4 faucet holes.

Mounting Type: Deck Mount Special Features: Low Flow Spray Type: Side Finish: Chrome (CR) Handle Type: Lever Handle Deck Clearance: 5" Spout Reach: 8" Spout Height: 6" Hole Drillings: 4 Material: Brass Valve Type: Ceramic Disc Valve Connection: 3/8" Female Compression Hose

Assembly Flow Rate: 1.5 GPM Faucet Hole Size (min): 1-3/8" Countertop Thickness: 2-1/2 Spout Swing Rotation: 360° Spout Type: Standard Special Note: 1.5 GPM flow regulator installed (2.2 GPM flow regulator also included with faucet)

Included with Product: Side Spray

AMERICAN PRIDE. A LIFETIME TRADITION.

Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities.

Product Compliance: ADA & ICC A117.1

ASME A112.18.1/CSA B125.1

NSF 61

NSF 372 (lead free)

Complies with ADA & ICC A117.1 accessibility requirements when installed according to the requirements outlined in these standards.

Clean and Care Manual (PDF) Installation Instructions (PDF) Limited Lifetime Warranty (PDF)

PART:________________________________QTY: _____________

PROJECT:______________________________________________

CONTACT:______________________________________________

DATE:__________________________________________________

NOTES:_________________________________________________

APPROVAL:

Elkay Everyday Three Hole Deck Mount Kitchen Faucet with Lever Handle and Side Spray and Escutcheon Chrome

Model(s) LK1001CR

In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. Please visit elkay.com for the most current version of Elkay product specification sheets. This specification describes an Elkay product with design, quality, and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not overlooked.

Elkay REV 09182018 2222 Camden Court © 2018 Page 2 LK1001CR Oak Brook, IL 60523 LK1001CR_spec.pdf

This popular model offers the following features and benefits:

• 1/2 Horsepower Heavy Duty Motor (Quiet Dura-Drive® Induction Motor)

• We Come To You® 2-Year In-Home Limited Warranty

• Rugged Galvanized Steel Construction (For Disposer Durability)

• Space-Saving Compact Design

• Available with or without a factory installed power cord.

Submittal Sheet

Job Specifications

Specifications Type of Feed Continuous

On/Off Control Wall Switch

Motor Single Phase

HP 1/2

Volts 120

HZ 60

RPM 1725

Amp. (Avg. Load) 6.3

Time Rating Intermittent

Lubrication Permanently Lubricated Upper & Lower Bearings

Shipping Weight (Approx.)

Unit Finish Condor Grey

Overall Height 11-1/2”

Grind Chamber Capacity 26 oz.

Motor Manual Reset Protection Overload

Average Approx. 1 Gallon per Water Usage Person Per Day

Average Electrical Usage 3-4 KWh per Year

Drain 1-1/2” Cushioned Connection Slip Joint

Dishwasher Drain Connection Yes

Factory Installed Power Cord

Food Waste Disposers

Dimensions Sample Specification

The complete InSinkErator warranty is included in the Care & Use Booklet packed with each unit.

Food Waste Disposer(s) shall be InSinkErator Badger® 5, continuous feed, with 1/2 H.P. motor, galvanized steel grinding elements with two stainless steel 360° swivel lugs.

Self-service wrench.

Available with or without a factory installed power cord.

Warranty:

2- Year parts and in-home service.

* Distance from bottom of sink to center line of disposer outlet.

Add 1/2" when stainless steel sinks are used.

** Length of tailpipe from center line of disposer outlet to end of tailpipe.

NOTE: Plumb waste line to prevent standing water in disposer motor housing.

1-800-558-5700 www.insinkerator.com

4"

Dishwasher Drain

Connection

5"

6"

111/2"

65/16"

The Emerson logo is a trademark and service mark of Emerson Electric Co. The mounting collar configuration is a trademark of Emerson Electric Co.

InSinkErator may make improvements and/or changes in the specifications at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models.

H883-18C-83-10 Printed in U.S.A. © 2018 InSinkErator, InSinkErator® is a business unit of Emerson Electric Co. All Rights Reserved.

Food waste disposers can provide an environmentally responsible alternative to transporting food waste to landfills. And they can help reduce greenhouse gas emissions. At capable wastewater treatment plants, food waste can be recycled to produce renewable energy. Additionally, capable wastewater treatment plants can process food waste into fertilizer. (Check the plant in your area.)

13 lbs. 10 oz. (without cord) 13 lbs. 14 oz. (with cord)

Available with or without

PRINTED IN U.S.A. 03/15 WP FORM NO. RR102C-8 Rev. 16

Water Commercial Gas AdvantagePlus Water Heaters

Features & Benefits Rheem AdvantagePlus™ water heaters offer ultra high efficiency and reliability. Models are available that range from 100,000-199,000 Btu/h, with a temperature setting from 70 to 160 degrees Fahrenheit; 180 degree maximum temperature available on HE55-160 and HE55-199 models, with included booster kit.

Efficiency

" Non-CFC, polyurethane foam insulation reduces standby heat loss

Electronic Control Panel Self-diagnostic electronic control with HSI ignition control and diagnostics.

Technology & Construction exchanger, which is constructed of corrosion resistant, high efficiency, 90/10 cupronickel. Stainless steel tank construction requires no anode rods.

Durable plastic exterior shell.

Removable Front Cover Allows for easy access to equipment recommended)

Low Cost Venting No chimney required. Vents through standard PVC, CPVC and ABS pipes, with a vent run up to 85 feet total for exhaust and intake.

Power Direct Vent Install as a two pipe power direct vent when air quality or negative air pressure are issues. Optional concentric vent kits are available for side or vertical venting. Optional aluminum outside vent termination kit.

CSA/ASME Rated T&P Valve Factory installed relief valve

Ultra Low NOx Burner Design reduces NOx emissions to less compliant)

Clearances Zero clearance to combustibles

Altitude Certification Certified up to 10,000 feet above sea level

Warranty 3-Year limited tank warranty See Commercial Warranty Certificate for complete information.

Certification & Ratings | AdvantagePlus commercial water heaters are UL/ULCX listed and exceed the minimum efficiency requirements of ASHRAE/IES control panel is an integrated solid state temperature and ignition control device with integral diagnostics, LED fault display capability and digital display of temperature setting. All models are North Carolina Code compliant. Meet all safety and construction

Certified for 150 PSI maximum working pressure.

AdvantagePlus is a family of ultra high efficiency commercial gas water heaters with 95 percent thermal efficiency for lower operating costs

Rheem AdvantagePlus 55, 80 & 119-Gallon Capacities

100,000-199,000 Btu/h No Chimney Required

Low Water Cut-off on All Models Power Direct Vent

Natural Gas and LP

WH-1

DIMENSIONAL INFORMATION

All dimensions shown in English and Metric

MODEL WATER CONNECTIONS APPROX

NUMBER UNITS A B C D E F G H VENT INLET OUTLET SHIPPING WT.

inches 52 23-1/2 32 45 5 25-1/4 27-9/16 5-7/8 2 1 1 175 lbs.

mm 1321 597 813 1143 127 641 700 149 51 25 25 79 kgs inches 52 23-1/2 32 45 5 25-1/4 27- 9/16 5-7/8 3 1 1 175 lbs.

mm 1321 597 813 1143 127 641 700 149 76 25 25 79 kgs inches 72 23-1/2 32 65 5 25-1/4 20-1/4 7-3/4 3* 1-1/2 1-1/2 235 lbs.

mm 1854 597 813 1651 127 641 514 197 76 38 38 106 kgs inches 73 27 36 66-3/4 6-3/4 28-7/8 22 9-1/2 3* 1-1/2 1-1/2 405 lbs.

mm 1854 686 914 1695 171 733 559 241 76 38 38 184 kgs

* 130,000 Btu/h models are certified to be installed with 2" venting.

All models require a 120V power source.

See use and care manual for venting details.

HE55-100

HE55-130

HE55-160

HE55-199

HE80-130

HE80-160

HE80-199

HE119-130

HE119-160

HE119-199

HE55-100

HE55-130

HE80-130

HE119-130

HE80-160

HE119-160

HE80-199

HE119-199

HE55-160

HE55-199

MAXIMUM DELIVERY

In U.S. Gallons and Liters (Includes useable storage and recovery for indicated times)

MODEL INPUT (BTU/H) TEMP. 5 10 15 20 30 45 1 2 3 MIN. TO RECOVER

NUMBER GAL. LITERS NAT. & LP RISE UNITS MIN. MIN. MIN. MIN. MIN. MIN. HR. HR. HR. CONTENTS

HE55-100 55 208 100,000 100°F GAL. 48 58 67 77 96 125 154 269 384 29

56°C LTR. 182 219 255 291 364 473 582 1019 1455

HE55-130 55 208 130,000 100°F GAL. 51 63 76 88 113 151 188 338 488 22

56°C LTR. 193 240 288 335 430 571 713 1281 1848

HE80-130 80 303 130,000 100°F GAL. 68 81 93 106 131 168 206 355 505 32

56°C LTR. 259 306 354 401 495 637 779 1345 1912

HE119-130 119 450 130,000 100°F GAL. 96 108 121 133 158 196 233 383 532 48

56°C LTR. 363 410 457 504 599 750 882 1449 2015

HE55-160 55 208 160,000 100°F GAL. 54 69 85 100 131 177 223 407 591 18

56°C LTR. 204 262 320 379 495 670 844 1542 2241

HE80-160 80 303 160,000 100°F GAL. 71 87 102 117 148 194 240 424 609 26

56°C LTR. 270 328 386 444 561 735 909 1607 2304

HE119-160 119 450 160,000 100°F GAL. 99 114 129 145 175 221 268 452 636 39

56°C LTR. 373 432 490 548 664 838 1013 1710 2408

HE55-199 55 208 199,000 100°F GAL. 58 77 96 115 153 210 268 497 726 14

56°C LTR. 218 291 363 435 580 797 1014 1883 2751

HE80-199 80 303 199,000 100°F GAL. 75 94 113 132 171 228 285 514 743 21

56°C LTR. 284 357 429 501 646 863 1079 1947 2814

HE119-199 119 450 199,000 100°F GAL. 102 121 141 160 198 255 312 542 771 31

56°C LTR. 338 460 532 604 749 966 1183 2050 2918

All models have a maximum setpoint of 160°F with the exception of the HE55-160 and HE55-199 booster models. The HE55-160 and HE55-199 have a maximum setpoint of 180°F.

RECOVERY CAPACITIES

Recovery in U.S. Gallons/Hr. (GPH) and Liters/Hr. (LPH) at Various Temperature Rises

MODEL INPUT (BTU/H) THERMAL 40°F 50°F 60°F 70°F 80°F 90°F 100°F 110°F 120°F 130°F 140°F NUMBER NAT. & LP EFFICIENCY UNITS (22°C) (28°C) (33°C) (39°C) (45°C) (50°C) (56°C) (61°C) (67°C) (72°C) (78°C)

100,000 95% GPH 288 230 192 165 144 128 115 105 96 N/A N/A

LPH 1090 872 726 623 545 484 436 396 363 N/A N/A

130,000 95% GPH 374 299 249 214 187 166 150 136 125 N/A N/A

LPH 1417 1133 944 809 708 630 567 515 472 N/A N/A

160,000 95% GPH 461 368 307 263 230 205 184 167 154 N/A N/A

LPH 1744 1395 1162 996 872 775 697 634 581 N/A N/A

199,000 95% GPH 573 458 382 327 286 255 229 208 191 N/A N/A

LPH 2169 1735 1446 1239 1084 964 867 789 723 N/A N/A

BOOSTER MODELS

160,000 95% GPH 461 368 307 263 230 205 184 167 154 142 132

LPH 1744 1395 1162 996 872 775 697 634 581 536 498

199,000 95% GPH 573 458 382 327 286 255 229 208 191 176 164

LPH 2169 1735 1446 1239 1084 964 867 789 723 667 620

Recovery rating is based on thermal efficiencies obtained in an UL certified laboratory.

AdvantagePlus Gas Water Heaters

0" CLEARANCE TO

COMBUSTIBLES ON

ALL ADVANTAGE PLUS

UNITS, HOWEVER, A

24" CONTROL PANEL

SERVICE CLEARANCE IS

RECOMMENDED.

MODELS WITH INPUTS

OF 100,000 BTU/H AND

130,000 BTU/H ARE

CERTIFIED TO VENT

WITH 2" SCHEDULE 40

PVC OR CPVC PIPE.

(FOR CANADIAN

INSTALLATION PLEASE

USE ULC-S636 PVC OR

CPVC PIPE.)

HE55-100 HE55 100 100,000 95%

inches 52 23-1/2 32 45 5 25-1/4 27-9/16 5-7/8 2 1 1 175 lbs.

mm 1321 597 813 1143 127 641 700 149 51 25 25 79 kgs

HE55-100

HE55-130

g

100°F (56°C)

(56°C)

AdvantagePlus Gas Water Heaters

CONTROL

B

A

T&P

C

F

3.75”

CONDENSATE

CONNECTION

ELECTRICAL

CONNECTION

GAS INLET

HOT OUT

COLD IN

D

E

INTAKE

EXHAUST

5.0"

3.0" H

G

Dimensional Information

T&P PORT

COLD IN PORT

HOT OUT PORT

CO

NT

RO

L P

OR

T

TOP VIEW SHOWN

WITHOUT CABINET

AND IS THE SAME

FOR ALL TANKS SHOWN

60 39 54

Venting Options

Booster for High Temperature Sanitation Rinse

Side Venting with Concentric Vent Kit Side View

Vertical Roof Venting with Concentric Vent Kit Front View

For Canadian installation please use ULC-S636 PVC or CPVC pipe.

PRINTED IN U.S.A. 03/15 WP FORM NO. RR102C-8 Rev. 16

In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

Recommended Specifications (for trade reference only) Water Heaters shall be Rheem model number HE- _________.

taking only outside air for combustion and exhausting the flue

Btu/h and 130,000 Btu/h) and the exhaust gas shall be piped with PVC or CPVC pipe. All related intake air and exhaust gas shall be approved for zero clearance to any combustible surface.

primary condensing heat exchanger shall be constructed of shell. All components shall be located in the front of the heater for easy access for serviceability. All related hardware shall be constructed of stainless steel studs and brass nuts for serviceability. Water heater(s) shall be covered by a three year limited tank warranty against tank leaks.

Water Commercial Gas AdvantagePlus Water Heaters

The HE55-160 and HE55-199 Booster models are the only models equipped with a 180° F thermostat. Models with 180° F thermostats come standard with the Booster Installation Kit which includes all necessary components for an approved installation.

Booster Installation Kit includes:

SUBMITTAL

A-

JOB: REPRESENTATIVE:

UNIT TAG: ORDER NO. DATE:

ENGINEER: SUBMITTED BY: DATE:

CONTRACTOR: APPROVED BY: DATE:

Energy Efficient, Permanent Magnet Motor Electronically Commutated

Description ecocirc® 19-1 esigned with highly efficient cally commutated permanent magnet motor (ECM technology) for hydronic systems.

Control Modes The ecocirc® has

Materials of Construction Pump Body: Cast Iron O-Ring: EPDM Bearing: Carbon/Alumina Ceramic Impeller: Nylon/PPO All Other Wetted Parts: Stainless Steel

Motor Designed with shaft-less spherical motor permanent magnet technology for improved efficiency.

Operating Data Maximum Working Pressure: 150 psi (10 Bar) Maximum Temperature: 203°F (110°C) Minimum temperature: °F ( °C)

Motor:

ECM Spherical Motor 115 Volts, 60 HZ, 1 Phase

60 Watts Power Consumption Automatic Overload Protection Low in-rush current

Piping Connection Flanged, 2-Bolt For use with ¾, 1, 1¼, or 1½ inch pipe

P-1

A-Specification:

The contractor shall furnish and install in-line pumps as illustrated on the plans and in accordance with the following specifications:

1. The pumps shall be of the high efficiency type specifically designed for quiet operation.

2. Pump

. The pumps shall have a shaft-less, wet rotor design with a ceramic ball bearing lubricated by the system fluid.

Pump to have

Motor shall be spherical electronically commutated , permanent magnet (EC /PM).

. Motor shall be non-overloading at any point on the pump curve

Xylem Inc.

8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847) 966-3700 Fax: (847) 965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries.

© 201 Xylem Inc.

6,38” (162mm)

3,54” (90mm)

3,15” (80mm)

0,47” (12mm)

6,09” (154mm)

7,4” (188mm)

3,74” (95mm)

Part Number Model 6050B200 6050B200

Pumps

Pumps to have a capacity of____GPM at _____foot of head. .

Pump to be suitable for 203°F (110°C) operation at 150 psi (10 Bar) working pressure..

White Powder Coated Ice Maker Outlet Box With Lead Free Valves

SPECIFICATION

Furnish and install recessed, white powder coated ice maker outlet box. Ice maker outlet box shall have a brass plated, quarter turn valve mee ng Lead Free re quirements. Valve shall feature either Mylar® tag and AB1953 stamping or white handle and check mark logo for easy Lead Free iden ca on. Unit shall be Guy Gray™ product code checked below as manufactured by IPS Corpora on.

SPECIFICATION SUBMITTAL SHEET

Product Code #

Model Number

Product Description

Units/ Case

88133 MIB1AB Brass Qtr Turn Valve, Installed, 1/2" Sweat Conx. 5 88532 MIB2AB Brass Qtr Turn Valve, Installed, 1/2" CPVC Conx. 5 88178 MIB3AB Brass Qtr Turn Valve, Installed, 1/2" PEX Conx. 5 88534 MIB4AB Brass Qtr Turn Valve, Installed, 1/2" Sweat Conx. Contractor Pack 10 88535 MIB5AB Brass Qtr Turn Valve, Installed, 1/2" Wirsbo Conx. 5

OB-1

RANGE HOODS

BROAN VENT ILAT ION SOLUT IONS .

CLEANER K ITCHEN. HEALTHIER HOME.

RH-1

ENERGY STAR®

Broan makes it easy to go green with a variety of ENERGY STAR® certified range hoods.

With efficient motor designs as well as LED and compact fluorescent lighting options, these range hoods meet the program requirements of USGBC,® LEED® and NAHB.

ENERGY STAR® is a registered mark owned by the U.S. government.32

SPECIFICATIONS OPTIONAL ACCESSORIES

Width High

CFM

Normal Sones Volts Amps Duct Non-ducted Charcoal Filter

30" 250 1.5 120 .65 3-1/4 x 10" (V, H) 7" RD (V only) HPF30 (Type Xc)

STAINLESS

30" BCSEK130SS

BLACK

30" BCSEK130BL

SLATE (shown, available mid-June)

30" BCSEK130SL

WHITE

30" BCSEK130WW

Glacier BCSEK1 The clean, contemporary shape of Glacier complements any kitchen design.

Impressive ENERGY STAR® certified LED lighting and superior smoke and odor removal are a mere introduction to everything this hood has to offer.

• The Captur™ system’s advanced blower design features a forward positioned centric inlet to remove smoke and odor faster. A smooth-flow blower wheel and high flow filters ensure quiet operation.

• 250 CFM blower operates at 1.5 sones at normal speed.

• Bright, single intensity LED modules— supported by a 3-year warranty—illuminate evenly and are tested in cooking environments to ensure long life without dimming. ENERGY STAR® certification saves energy expense.

• Hidden two-speed on/off rocker switch.

• Dual dishwasher-safe, open-mesh filters provide efficient grease removal.

• EZ1 brackets make it easy for single-person installation in less than half the time of traditional methods.

• ADA compliant, remote operation is possible using a standard UL approved wall switch.

• Non-duct capable with use of charcoal filters, sold separately. Hidden louvers on top of hood exhaust away from cabinetry.

For faster smoke and odor removal.

MARK: EF-1

PROJECT: MHAFB CHAPEL FANS

DATE: 11/20/2018

ØK

Conduit Hole Location*

Cooling Tube

G

H number of keyslots

D T

Dia.

F E

C A

B

ØJ

22.5°

ACWD VF

Centrifugal Exhaust Ventilator Wall Mounted/Direct Drive Electronically Commutated Vari-Flow® Motor

STANDARD CONSTRUCTION FEATURES:

All aluminum housing - Backward inclined all aluminum wheel -Two piece top cap with stainless steel quick release latches (sizes 120 - 245) - Mounting flange with keyslots and templates - Birdscreen - Permanently lubricated ball bearing motor - Corrosion resistant fasteners - Transit tested packaging. Note: *Conduit hole location as viewed from fan side.

Qty Catalog Number

Flow

(CFM)

SP

(inwc)

Fan

RPM

Power

(HP) FEG

Speed Control

1 120W17D (VF) 700 .250 948 .057 n/a(<1HP) EC

Performance

HP RPM* Volts/Ph/Hz Enclosure

1/8 1725 115/1/60 OPEN -EC

Motor Information

1 2 3 4 5 6 7 8 LwA dBA Sones

68 67 62 55 53 50 45 40 59 48 4.9

Sound Data Inlet Sound Power by Octave Band v9.9.145.0 Page 1 of 6

Accessories:

EXTERNAL SIGNAL SPEED CONTROL

VFCO2-N CO2 BACNET

VFABK AIR BALANCEKIT

BD MOTORIZED INTAKE CTR PIVOT L-12-24V

A 18-7/16 B 30-3/16 C 28-1/4 D 20-3/8

E Square 12 E Round 12

F 23-1/2 G Dia. 3/8

H Num. 4 J Dia. 16

K Dia. 7/8 T Dia. 25

Weight(lbs)*** Shipping 89 Unit 73 NOTE: Accessories may affect dimensions shown.

Dimensions (inches)

***Includes fan, motor & accessories.

0.00

0.08

0.16

0.24

0.32

0.40

0.00

.017

.033

.050

.066

.083

0 200 400 600 800 1000 Flow (CFM)

SP

(i nw c)

Pow er (H

P)

Fan Curve

Fan Curve Legend CFM vs SP CFM vs HP Point of Operation System Curve

Altitude (ft): 3000 Temperature (F): 70

*Motor programmed to max speed of 1212 RPM.

DATE: 11/20/2018

Adjustment Screw

Speed Control

Low Voltage

0-10 VCD - Red Control Signal Common - White/Red

L2 120V - White (208-230)

Earth Ground - Green

L1 120V - Black (208-230)

MOTOR CONTROL INPUT

MOTOR POWER INPUT

SPEED CONTROLLER

Speed Control External Speed Control Electronically Commutated (EC) Motor Type N

STANDARD CONSTRUCTION FEATURES:

Vari-Flow EC Motors are available in 1/8 to 1 HP for 120V or 208-230V -Single phase applications have a adjustable speed range of 500 to 1725 or 500 to 2800 - Some motors come with a factory programmed maximum RPM for specific applications - External signal speed control requires a 0-10 VDC control signal to adjust speed of the motor - The motor will operate from 2-1 0 VDC and turns off when the control signal is below 1.9 VDC - Dial on speed control must be set to 0 for proper external speed control operation.

v9.9.145.0 Page 2 of 6

Mark Qty Description

EF-1 1 OPEN -1/8HP - 115V/1

Dimensions (inches)

DATE: 11/20/2018

v9.9.145.0 Page 3 of 6

CO2 Controller Product Description The Vari-Flow CO2 Controller (VFCO2/VFCO2-N) is used to modulate fan speed via a 0-10VDC output signal to a Vari- Flow motor. The signal varies directly with the difference between the ambient CO2 level and the CO2 set point. It will also simultaneously control to the humidity and temperature set points.

Setup is configured via a pushbutton menu and digital readout. Monitoring capability is achieved through dry contact set points. VFCO2-N is BACnet or Modbus network-compatible (selectable via menu).

DATE: 11/20/2018

v9.9.145.0 Page 4 of 6

Wiring Diagram CO2 Controller with Air Balance Kit

DATE: 11/20/2018

v9.9.145.0 Page 5 of 6

Air Balance Kit Product Description The Vari-Flow Air Balance Kit (VFABK) is an interface which integrates and simplifies the interconnection of Vari-Flow motors and controls. It also provides a convenient point to set the speed range over which the Vari- Flow motor will operate. It is provided whenever external signal capability is ordered with Vari-Flow motors on Cook fans.

The VFABK contains an integral 24V control transformer. It provides convenient terminals for landing Vari-Flow motors and controls as well as auxiliary control of motor operated dampers. It also provides a means for remote on/off control.

Status is indicated by a tricolor LED light.

DATE: 11/20/2018

Air Flow

Opposed Blade

E

B

AA

C D Max.

Motorized Damper Low Leakage Class 1A Rated Galvanized Steel

STANDARD CONSTRUCTION FEATURES:

-Frame: 5" x 1" x 16 gauge hot dipped galvanized steel hat channel reinforced with corner braces.

-Blades: 6" wide, galvanized steel one piece airfoil shape, construction of 14 gauge equivalent thickness. Opposed blade std.

-Seals: Neoprene blade edge seals mechanically fastened to blades.

-Bearings: Oil impregnated self lubricating, stainless steel sleeve.

-Linkage: Concealed outside airstream.

-Axles: 1/2" plated steel hex.

-Temperature Limits: -72 deg. F and +275 deg. F.

-Actuator in Airstream available in 24v, 115v, (230v and 460v with transformer). Power Open/Spring Close.

-MIN 13-1/2" CURB HT REQUIRED IF CURB MOUNTED.

v9.9.145.0 Page 6 of 6

Mark Qty Description A B C D E Num. Actuators

EF-1 1 BDMICL-12-24V 1-1/2 5 10-3/4 11-1/2 8-3/4 1

Dimensions (inches)

Appendix G - Fire Protection Fire Hydrant Flow Test & Preliminary Hydraulic Calculations