Atch_14_HAFB_Standard_Design.pdf

Standard Design Criteria:

The references listed below include the common criteria that may be applicable. Other technical documents and publications, which are deemed applicable for a particular project, will be made identified in the Statement of Work. Use the latest edition of references unless specified otherwise.

Building Codes:

International Building Code International Mechanical Code International Plumbing Code International Energy Conservation Code International Fuel Gas Code Fire Safety Code, NFPA 1 Life Safety Code, National Fire Protection Association, NFPA 101 National Electric Code, NFPA 70 National Electric Safety Code, ANSI C2 Council of American Building Officials (CABO) One and Two Family Dwelling Code

Design Standards:

Holloman AFB Design Compatibility Standard Holloman Energy Management & Control System (EMCS) Design Standard Air Combat Command Architectural and Interior Design Standards Air Combat Command Energy & Facility Management Policy ASCE/SEI 7-05 Minimum Design Loads for Buildings and Other Structures ASHRAE Standard 62.1-2007 2010, Ventilation for Acceptable Indoor Air Quality ASHRAE Standard 90.1-2007, Energy Standard for Buildings Except Low Rise Residential Buildings Illuminating Engineering Society of North America, Reference and Application Lighting Handbook, 2008 ICSSC RP6 - Standards of Seismic Safety for Existing Federally Owned and Leased Buildings

Regulations:

Architectural Barriers Act (ABA) Accessibility Standard for Department of Defense Facilities 10 CFR 435 Energy Conservation Voluntary Performance Standards for New Buildings.

Mandatory for Federal Buildings Energy Policy Act of 2005 Energy Independence and Security Act of 2007 (EISA 2007) Air Force Metering Policy, 6 May 2010

Air Force Engineering Technical Letters:

AF ETL 01-1: Reliability and Maintainability Design Checklist

AF ETL 02-12, Communications and Information Systems Criteria for Air Force Facilities, AF ETL 11-21, Emergency and Standby Generator Design, Maintenance and Testing Criteria , AF ETL 01-18, Fire Protection Engineering Criteria AF ETL 01-18, Fire Protection Engineering Criteria-Electronic Equipment Installations, 24 October 2001 AF ETL 08-13, Incorporating Sustainable Design and Development (SDD) and Facility Energy Attributes in the Air Force Construction Program, 14 September 2008

Air Force Instruction (AFI):

AFI 32-10141, “Planning and Programming Fire Safety Deficiency Correction Projects”, attachment 3

Military Handbook:

MIL-HDBK 1004/6 Lightning Protection 1988

Air Force Handbook:

Air Force Handbook 32-1084, Facility Requirements

Unified Facilities Criteria:

UFC 1-200-01, General Building Requirements UFC 1-300-08, Process for the Transfer and Acceptance of Real Property UFC 3-201-02, Landscape Architecture UFC 3-210-01A, Area Planning, Site Planning, and Design UFC 3-210-02, POV Site Circulation and Parking UFC 3-210-10, Low Impact Development UFC 3-230-01 (FAA Advisory Circular 150 5320-5C), Surface Drainage Design UFC 3-230-07A, Water Supply, Sources and General Considerations.

UFC 3-230-10A, Water Supply, Water Distribution UFC 3-240-07FA, Sanitary and Industrial Wastewater Collection: Gravity Sewers and Appurtenances UFC 3-250-01FA, Pavement Design for Roads, Streets, Walks, and Open Storage Areas UFC 3-250-18FA, General Provisions and Geometric Design for Roads, in and around Airfields UFC 3-301 -01, Structural Engineering UFC 3-310-04, Seismic Design for Buildings UFC 3-400-01 Energy Conservation UFC 3-400-02 Design: Engineering Weather Data UFC 3-401-01FA, Utility Monitoring and Control Systems UFC 3-410-01FA, Heating, Ventilating, and Air Conditioning UFC 3-410-02A Heating, Ventilating, and Air Conditioning (HVAC) Control Systems UFC 3-420-01 Plumbing Systems

UFC 3-420-02FA Compressed Air UFC 3-450-01 Noise and Vibration Control.

UFC 3-501-01, Electrical Engineering UFC 3-520-01, Interior Electrical Systems UFC 3-530-01, Design: Interior and Exterior Lighting and Controls UFC 3-550-01, Exterior Electrical Power Distribution UFC 3-560-01, Electrical Safety, O&M UFC 3-570-02A, Cathodic Protection UFC 3-580-01, Telecommunications Building Cabling Systems Planning and Design.

UFC 3-600-01, Fire Protection Engineering for Facilities UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings UFC 4-010-02, DOD Minimum Standoff Distances for Buildings UFC 4-021-01, Design and O&M: Mass Notification Systems UFC 4-030-01, Sustainable Development

Other:

1354 Master Checklist Excel spread sheet DD Form 1354, “Transfer and Acceptance of DoD Real Property”