Solicitation Amendment - FA281626Q00020003.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30. 1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER 5. SOLICITATION NUMBER

FA281626Q00020003

6. SOLICITATION ISSUE DATE

11 Mar 2026

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME Dorian Maynard

b. TELEPHONE NUMBER (no collect calls) 0006530000

8. OFFER DUE DATE/

LOCAL TIME

01 Jun 2026

12:00 PM

9. ISSUED BY CODE: FA2816

FA2816 SMC PK PKO

CP 310 653 6118, 483 N AVIATION BLVD BLDG 272

EL SEGUNDO, CA 90245-2808

UNITED STATES

Dorian Maynard, Email: dorian.maynard.1@spaceforce.mil VICTOR MENDOZA, Email: victor.mendoza.4@spaceforce.mil Telephone:

3106535651

10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE: % FOR: 100

SMALL BUSINESS WOMEN-OWNED SMALL

BUSINESS (WOSB)

NORTH AMERICAN

INDUSTRY

CLASSIFICATION

STANDARD (NAICS):

561621

HUBZONE SMALL

BUSINESS

ECONOMICALLY

DISADVANTAGED WOMEN-

OWNED SMALL BUSINESS

(EDWOSB)

SIZE STANDARD:

USD 25,000,000.00

SERVICE-DISABLED

VETERAN-OWNED SMALL

BUSINESS (SDVOSB)

8(A)

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS 13a.THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM-DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

REQUEST FOR

QUOTE (RFQ)

INVITATION

FOR BID (IFB)

REQUEST FOR

PROPOSAL (RFP)

15. DELIVER TO CODE:

See Schedule

16. ADMINISTERED BY CODE:

17a. CONTRACTOR/

OFFERER

CODE FACILITY

CODE:

TELEPHONE NUMBER

18a. PAYMENT WILL BE MADE BY CODE:

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NUMBER

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT

PRICE

24.

AMOUNT

See Schedule (Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA

See Section G - Contract Administration Data

26. TOTAL AWARD AMOUNT (For Government Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR

52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN COPIES TO

ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL ITEMS SET FORTH

OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL SHEETS SUBJECT TO THE

TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REFERENCE OFFER DATED . YOUR

OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY ADDITIONS OR

CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

31c. DATE SIGNED

COMPUTER GENERATED STANDARD FORM 1449 (REV. 11/2021)

PREVIOUS EDITION IS NOT USABLE Prescribed by GSA - FAR (48 CFR) 53.212

Solicitation/Contract Form Base Alarm Services - FY26

Base Alarm Support Services for Los Angeles air Force Base.

Product Service Code: 6350

FA281626Q00020003

Supplies or Services & Prices or Costs Additional Information/Notes

Item Supplies / Services Quantity Unit Unit Price Amount

Base Alarm System Services Contractor shall provide all transportation, supplies, personnel for on-site support, and equipment to complete tasks as specified by Attachment 1 - Performance Work Statement (PWS).

Product Service Code: J063 Pricing Arrangement: Firm Fixed Price

7 Months

Equipment and Parts Items and parts purchased for required work under this contract but not covered in the PWS will be ordered against this CLIN. Items will be verified by the COR and pricing will be verified by the contracting office prior to items being ordered and invoiced.

This CLIN is for materials only, no labor hours, profit and overhead fees are authorized under this CLIN. Labor hours, profit, and overhead fees are included in CLIN X001 pricing only.

Product Service Code: 6350 Pricing Arrangement: Firm Fixed Price

1 Lot Not to Exceed

Option Line Item 1001

Option Period 1 Base Alarm System Services Contractor shall provide all transportation, supplies, personnel for on-site support, and equipment to complete tasks as specified by Attachment 1 - Performance Work Statement (PWS).

Product Service Code: J063 Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item 1002

Option Period 1 Equipment and Parts Items and parts purchased for required work under this contract but not covered in the PWS will be ordered against this CLIN. Items will be verified by the COR and pricing will be verified by the contracting office prior to items being ordered and invoiced.

This CLIN is for materials only, no labor hours, profit and overhead fees are authorized under this CLIN. Labor hours, profit, and overhead fees are included in CLIN X001 pricing only.

Product Service Code: 6350 Pricing Arrangement: Firm Fixed Price

1 Lot Not to Exceed

Option Line Item 2001

Option Period 2 Base Alarm System Services Contractor shall provide all transportation, supplies, personnel for on-site support, and equipment to complete tasks as specified by Attachment 1 - Performance Work Statement (PWS).

12 Months

Product Service Code: J063 Pricing Arrangement: Firm Fixed Price

Option Line Item 2002

Option Period 2 Equipment and Parts Items and parts purchased for required work under this contract but not covered in the PWS will be ordered against this CLIN. Items will be verified by the COR and pricing will be verified by the contracting office prior to items being ordered and invoiced.

This CLIN is for materials only, no labor hours, profit and overhead fees are authorized under this CLIN. Labor hours, profit, and overhead fees are included in CLIN X001 pricing only.

Product Service Code: 6350 Pricing Arrangement: Firm Fixed Price

1 Lot Not to Exceed

Option Line Item 3001

Option Period 3 Base Alarm System Services Contractor shall provide all transportation, supplies, personnel for on-site support, and equipment to complete tasks as specified by Attachment 1 - Performance Work Statement (PWS).

Product Service Code: J063 Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item 3002

Option Period 3 Equipment and Parts Items and parts purchased for required work under this contract but not covered in the PWS will be ordered against this CLIN. Items will be verified by the COR and pricing will be verified by the contracting office prior to items being ordered and invoiced.

This CLIN is for materials only, no labor hours, profit and overhead fees are authorized under this CLIN. Labor hours, profit, and overhead fees are included in CLIN X001 pricing only.

Product Service Code: 6350 Pricing Arrangement: Firm Fixed Price

1 Lot Not to Exceed

Option Line Item 4001

Option Period 4 Base Alarm System Services Contractor shall provide all transportation, supplies, personnel for on-site support, and equipment to complete tasks as specified by Attachment 1 - Performance Work Statement (PWS).

Product Service Code: J063 Pricing Arrangement: Firm Fixed Price

12 Months

Option Line Item 4002

Option Period 4 Equipment and Parts Items and parts purchased for required work under this contract but not covered in the PWS will be ordered against this CLIN. Items will be verified by the COR and pricing will be verified by the contracting office prior to items being ordered and invoiced.

This CLIN is for materials only, no labor hours, profit and overhead

1 Lot Not to Exceed fees are authorized under this CLIN. Labor hours, profit, and overhead fees are included in CLIN X001 pricing only.

Product Service Code: 6350 Pricing Arrangement: Firm Fixed Price

Description/Specifications/Statement of Work

Requirements Base Alarm Support Services for Los Angeles air Force Base.

Packaging and Marking

Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

52.246-4 Inspection of Services-Fixed-Price. Aug 1996 Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.huguez@spaceforce.mil Telephone: 3106335526

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 1001

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 1002

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 2001

Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 2002

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 3001

Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 3002

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Option Line Item 4001

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil

Option Line Item 4002

Destination Instructions: See Contract Terms and Conditions for Inspection and Acceptance criteria.

DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Deliveries or Performance

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

7 Months Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Period of Performance From 19 Jul 2026 To 18 Feb 2027

Delivery Schedule 1 Lot As Required

1 Lot Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

FoB Details Contractor Destination

Option Line Item 1001

12 Months Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Period of Performance From 19 Feb 2027 To 18 Feb 2028

Option Line Item 1002

Delivery Schedule 1 Lot As Required

1 Lot Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

FoB Details Contractor Destination

12 Months Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Option Line Item 2001 Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Period of Performance From 19 Feb 2028 To 18 Feb 2029

Option Line Item 2002

Delivery Schedule 1 Lot As Required

1 Lot Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

FoB Details Contractor Destination

Option Line Item 3001

12 Months Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Period of Performance From 19 Feb 2029 To 18 Feb 2030

Option Line Item 3002

Delivery Schedule 1 Lot As Required

1 Lot Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

FoB Details Contractor Destination

Option Line Item 4001

12 Months Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Period of Performance From 19 Feb 2030 To 18 Feb 2031

Delivery Schedule 1 Lot As Required

1 Lot Place of Performance DoDAAC: F2T6AA CountryCode: USA

F2T6AA 61 SFS

AF NO MILSBILLS PROC CP3106535310, 483 N AVIATION BLVD

FoB Details Contractor Destination

Option Line Item 4002 EL SEGUNDO, CA 90245-2088

UNITED STATES

Mark Hughez Email: mark.hughez@spaceforce.mil Telephone: 3106335526

Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

252.201-7000 Contracting Officer's Representative. Dec 1991 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Electronic invoicing.

Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before WAWF training.

submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol. WAWF methods of document submission.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract WAWF payment instructions.

or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report Combo

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice 2in1

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment Document routing.

requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC F03000

Issue By DoDAAC FA2816

Admin DoDAAC FA2816

Inspect By DoDAAC F2T6AA

Ship To Code F2T6AA

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) F2T6AA

Service Acceptor (DoDAAC) F2T6AA

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the Payment request.

payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

dorian.maynard.1@spaceforce.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Special Contract Requirements

Contract Clauses

RFO 52.212-1 Instructions to Offerors--Commercial Products and Commercial Services.

As prescribed in 12.205(a)(1), insert a clause substantially as follows:

Instructions to Offerors--Commercial Products and Commercial Services (Deviation Date)

(a) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. As a minimum, offers shall include--

(1) The solicitation number;

(2) The name, address, telephone number of the Offeror;

(3) The Offeror's Unique Entity Identifier (UEI) and, if applicable, Electronic Funds Transfer (EFT) indicator;

(4) Information necessary to evaluate the factors contained in the provision at 52.212-2 or as described in the solicitation;

(5) Responses to provisions that require Offeror completion of information, representations, and certifications (other than those collected via the System for Award Management (SAM)); and

(6) A statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation and any solicitation amendments.

(7) Have items 1-6 listed above in no more than 10 pages, we will review the front page as page 1 even if it's a cover page. Anything past page 10 will not be reviewed for evaluation purposes. Additionally, send one copy redacting all company information and one unredacted. This 10-page limit does not include the SF 1449 where the quote will be submitted, that will be its own separate document.

(8) For the CLINs in the X002 series, (0002, 1002, etc) on the SF1449, leave the dollar value at $0. The CLIN X001 series will be the only CLINS evaluated for pricing.

(b) Period for acceptance of offers. The Offeror agrees to hold the prices in its offer firm for 60 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(c) Late submissions, modifications, revisions, and withdrawals of offers.

(1) Offerors are responsible for submitting offers and any modifications or revisions to the Government office designated in the solicitation by the time specified in the solicitation.

(2) Any offer, modification, or revision received after the time specified for receipt of offers is "late" and will not be considered unless it is received before award is made and the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition. However, a late modification of an otherwise successful offer that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.

(3) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent

Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(4) Offerors may withdraw their offers by written notice to the Government received at any time before award.

(d) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with Offerors. Therefore, the Offeror's initial offer should contain the Offeror's best terms. However, the Government reserves the right to conduct discussions, if necessary. The Government may reject any or all offers if such action is in the public interest, accept other than the lowest offer, and waive informalities and minor irregularities in offers received.

(e) Debriefings. If a post award debriefing is given to requesting Offerors, the Government will disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed Offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful Offeror and the debriefed Offeror and past performance information on the debriefed Offeror.

(3) The overall ranking of all Offerors when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award.

(5) For acquisitions of commercial products, the make and model of the product to be delivered by the successful Offeror.

(6) Reasonable responses to relevant questions posed by the debriefed Offeror as to whether the agency followed source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities.

52.204-26 Covered Telecommunications Equipment or Services-Representation.

As prescribed in (c)4.2105 , insert the following provision:

Covered Telecommunications Equipment or Services-Representation (Oct 2020)

(a) Definitions. As used in this provision, "covered telecommunications equipment or services" and "reasonable inquiry" have the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) ( https:// www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services".

FA281626Q00020003

https://www.acquisition.gov/far/4.2105#FAR_4_2105 https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.sam.gov/

(c)

(1) Representation. The Offeror represents that it does, does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(2) After conducting a reasonable inquiry for purposes of this representation, the offeror represents that it does, does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services.

(End of provision)

52.222-42 Statement of Equivalent Rates for Federal Hires.

As prescribed in (b)22.1006 , insert the following clause:

Statement of Equivalent Rates for Federal Hires (May 2014)

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor ( 29 CFR Part 4

), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to the provisions of 5 U.S.C.5341 or 5 332.

This Statement is for Information Only: It is not a Wage Determination

Employee Class Monetary Wage-Fringe Benefits

27004 ALARM MONITOR GS-5 (23.98 ~hr rate)

23930 TELECOMMUNICATIONS MECHANIC (Occupational Base) WG-10 (33.93 ~hr rate)

23931 TELECOMMUNICATIONS MECHANIC I WG-10 (33.93 ~hr rate)

23932 TELECOMMUNICATIONS MECHANIC II WG-11 (35.88 ~hr rate)

FA281626Q00020003

https://www.acquisition.gov/far/22.1006#FAR_22_1006

(End of clause)

52.240-91 Security Prohibitions and Exclusions.

As prescribed in 40.205(b), insert the following clause:

Security Prohibitions and Exclusions (Deviation Date)

(a) Definitions. As used in this clause--

American Security Drone Act-covered foreign entity means an entity included on a list that the Federal Acquisition Security Council (FASC) develops and maintains and publishes in the System for Award Management (SAM) at https://

(section 1822 of Pub. L. 118-31, 41 U.S.C. 3901 note prec.).www.sam.gov

Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet).

Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

Covered article, as defined in 41 U.S.C. 4713(k), means:

(1) Information technology, as defined in 40 U.S.C. 11101, including cloud computing services of all types;

(2) Telecommunications equipment or telecommunications service, as those terms are defined in section 3 of the Communications Act of 1934 (47 U.S.C. 153);

(3) The processing of information on a Federal or non-Federal information system, subject to the requirements of the Controlled Unclassified Information program (see 32 CFR part 2002); or

FA281626Q00020003

(4) Hardware, systems, devices, software, or services that include embedded or incidental information technology.

Covered foreign country means The People's Republic of China.

Covered telecommunications equipment or services means--

(1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities);

(2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities);

(3) Telecommunications or video surveillance services provided by such entities or using such equipment; or

(4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country.

Critical technology means--

(1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations;

(2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled--

(i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or

(ii) For reasons relating to regional stability or surreptitious listening;

(3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities);

(4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material);

(5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or

(6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817).

FASC-prohibited unmanned aircraft system means an unmanned aircraft system manufactured or assembled by an American Security Drone Act--covered foreign entity.

FASCSA order means any of the following orders issued under the Federal Acquisition Supply Chain Security Act (FASCSA) requiring removing covered articles from executive agency information systems or excluding one or more named sources or named covered articles from executive agency procurement actions, as described in 41 CFR 201-1.303(d) and (e):

(1) The Secretary of Homeland Security may issue FASCSA orders that apply to civilian agencies, to the extent not covered by paragraph (2) or (3) of this definition. This type of FASCSA order may be referred to as a Department of Homeland Security (DHS) FASCSA order.

(2) The Secretary of Defense may issue FASCSA orders that apply to the Department of Defense (DoD) and national security systems other than sensitive compartmented information systems. This type of FASCSA order may be referred to as a DoD FASCSA order.

(3) The Director of National Intelligence (DNI) may issue FASCSA orders that apply to the intelligence community and sensitive compartmented information systems, to the extent not covered by paragraph (2) of this definition. This type of FASCSA order may be referred to as a DNI FASCSA order.

Information technology, as defined in 40 U.S.C. 11101(6)--

(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use--

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.

Intelligence community, as defined by 50 U.S.C. 3003(4), means the following--

(1) The Office of the Director of National Intelligence;

(2) The Central Intelligence Agency;

(3) The National Security Agency;

(4) The Defense Intelligence Agency;

(5) The National Geospatial-Intelligence Agency;

(6) The National Reconnaissance Office;

(7) Other offices within the Department of Defense for the collection of specialized national intelligence through reconnaissance programs;

(8) The intelligence elements of the Army, the Navy, the Air Force, the Marine Corps, the Coast Guard, the Federal Bureau of Investigation, the Drug Enforcement Administration, and the Department of Energy;

(9) The Bureau of Intelligence and Research of the Department of State;

(10) The Office of Intelligence and Analysis of the Department of the Treasury;

(11) The Office of Intelligence and Analysis of the Department of Homeland Security; or

(12) Such other elements of any department or agency as may be designated by the President, or designated jointly by the Director of National Intelligence and the head of the department or agency concerned, as an element of the intelligence community.

Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connecting a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources.

Kaspersky Lab-covered article means any hardware, software, or service that--

(1) Is developed or provided by a Kaspersky Lab-covered entity;

(2) Includes any hardware, software, or service developed or provided in whole or in part by a Kaspersky Lab-covered entity; or

(3) Contains components using any hardware or software developed in whole or in part by a Kaspersky Lab-covered entity.

Kaspersky Lab-covered entity means--

(1) Kaspersky Lab;

(2) Any successor entity to Kaspersky Lab, including any change in name, e.g., "Kaspersky";

(3) Any entity that controls, is controlled by, or is under common control with Kaspersky Lab; or

(4) Any entity of which Kaspersky Lab has a majority ownership.

National security system, as defined in 44 U.S.C. 3552, means any information system (including any telecommunications system) used or operated by an agency or by a contractor of an agency, or other organization on behalf of an agency--

(1) The function, operation, or use of which involves intelligence activities; involves cryptologic activities related to national security; involves command and control of military forces; involves equipment that is an integral part of a weapon or weapons system; or is critical to the direct fulfillment of military or intelligence missions, but does not include a system that is to be used for routine administrative and business applications (including payroll, finance, logistics, and personnel management applications); or

(2) Is protected at all times by procedures established for information that have been specifically authorized under criteria established by an Executive order or an Act of Congress to be kept classified in the interest of national defense or foreign policy.

Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high.

Sensitive compartmented information means classified information concerning or derived from intelligence sources, methods, or analytical processes, which is required to be handled within formal access control systems established by the Director of National Intelligence.

Sensitive compartmented information system means a national security system authorized to process or store sensitive compartmented information.

Source means a non-Federal supplier, or potential supplier, of products or services, at any tier.

Subsidiary means an entity in which more than 50 percent of the entity is owned directly by a parent corporation or through another subsidiary of a parent corporation.

Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service.

Unmanned aircraft means an aircraft that is operated without the possibility of direct human intervention from within or on the aircraft (49 U.S.C. 44801(11)).

Unmanned aircraft system means an unmanned aircraft and associated elements (including communication links and the components that control the unmanned aircraft) that are required for the operator to operate safely and efficiently in the national airspace system (49 U.S.C. 44801(12)).

(b) Prohibitions on providing or using specific products or services in performance of contract. Unless a waiver or exception applies, the Contractor is prohibited from providing any products or services to the Government or using in the performance of the contract any of the following:

(1) A covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor's employees (section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328));

(2) A Kaspersky Lab-covered article (Section 1634 of Division A of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91));

(3) Covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system (paragraphs (a)(1)(A) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)). This does not prohibit contractors from providing--

(i) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Prohibition on unmanned aircraft systems manufactured or assembled by American Security Drone Act--covered foreign entities.

(1) Prohibition. The Contractor is prohibited from--

(i) Delivering any FASC-prohibited unmanned aircraft system, which includes unmanned aircraft (i.e., drones) and associated elements (sections 1823 and 1826 of American Security Drone Act of 2023, within the National Defense Authorization Act for Fiscal Year 2024, Pub. L. 118-31, Div. A, Title XVIII, Subtitle B, 41 U.S.C. 3901 note prec.);

(ii) On or after December 22, 2025, operating a FASC-prohibited unmanned aircraft system in the performance of the contract (section 1824 of Pub. L. 118-31); and

(iii) On or after December 22, 2025, using Federal funds to procure or operate a FASC-prohibited unmanned aircraft system (section 1825 of Pub. L. 118-31).

(2) Procedures. The Contractor shall search SAM for the FASC-maintained list of American Security Drone Act--covered foreign entities before proposing, or using in performance of the contract, any unmanned aircraft system. Also, the Contractor shall ensure any effort or expenditure associated with a FASC-prohibited unmanned aircraft system is consistent with a corresponding exemption, exception, or waiver determination expressly stated in the contract.

(3) Exemptions, exceptions, and waivers. The prohibitions in paragraph (c) of this clause do not apply where the agency has determined an exemption, exception, or waiver applies, and the contract indicates that such a determination has been made. See sections 1823 through 1825 and 1832 of Public Law 118-31 for statutory requirements pertaining to exemptions, exceptions, and waivers.

(d) Prohibition on using or providing specific products or services or conducting certain transactions regardless of connection to contract.

(1) Certain telecommunications and video surveillance equipment, systems, or services.

(i) Unless an applicable waiver has been issued by the Government, the Contractor cannot use any equipment, systems, or services that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system (paragraph (a)(1)(B) of section 889 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232)).

(ii) This prohibition applies to using covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. This does not prohibit the contractor from using--

(A) A service that connects to the facilities of a third party, such as backhaul, roaming, or interconnection arrangements; or

(B) Telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Office of Foreign Assets Control Restrictions.

(i) Except as authorized by the Office of Foreign Assets Control (OFAC) in the Department of the Treasury, the Contractor shall not acquire, for use in the performance of this contract, any supplies or services if any proclamation, Executive order, or statute administered by OFAC, or if OFAC's implementing regulations at 31 CFR chapter V, would prohibit such a transaction by a person subject to the jurisdiction of the United States.

(ii) Except as authorized by OFAC, most transactions involving Cuba, Iran, and Sudan are prohibited, as are most imports from Burma or North Korea, into the United States or its outlying areas.

(A) For lists of entities and individuals subject to economic sanctions, see OFAC's List of Specially Designated Nationals and Blocked Persons at https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-

.blocked-persons-list-sdn-human-readable-lists

(B) For more information about these restrictions, as well as updates, see OFAC's regulations at 31 CFR chapter V and at .https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information

(C) To conduct electronic screens of potential parties to regulated transactions, see the consolidated screening list at https:// , which consolidates multiple export screening lists of the Departments of www.trade.gov/consolidated-screening-list

Commerce, State, and the Treasury.

(3) Sudan prohibition. The Contractor is prohibited from conducting any restricted business operations in Sudan in accordance with Accountability and Divestment Act of 2007 (Pub. L. 110-174).

(4) Iran prohibitions.

(i) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, the contractor shall not engage in certain activities or transactions relating to Iran (section 6(b)(1)(A) of Iran Sanctions Act (50 U.S.C. 1701 note).

FA281626Q00020003

https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists https://home.treasury.gov/policy-issues/financial-sanctions/specially-designated-nationals-and-blocked-persons-list-sdn-human-readable-lists https://home.treasury.gov/policy-issues/office-of-foreign-assets-control-sanctions-programs-and-information https://www.trade.gov/consolidated-screening-list https://www.trade.gov/consolidated-screening-list

(ii) Unless an exception applies according to paragraph (d)(4)(iii) or the Government grants a waiver, contractor shall not export certain sensitive technology to Iran, as determined by the President, and has an active exclusion in SAM (22 U.S.C. 8515).

(iii) The prohibition in paragraphs (d)(4)(i) and (d)(4)(ii) do not apply if the acquisition is subject to trade agreements and the offeror certifies that all the offered products are designated country end products or designated country construction material (see part 25).

(iv) Unless an exception applies or the Government grants a waiver, contractors are prohibited from knowingly engaging in any significant transaction (i.e., over $15,000) with Iran's Revolutionary Guard Corps or any of its officials, agents, or affiliates, the property and interests in property of which are blocked according to the International Emergency Economic Powers Act (section 6(b)(1)(B) of Iran Sanctions Act (50 U.S.C. 1701 note)).

(e) Governmentwide exclusion and removal orders.

(1) Unless the Government has issued an applicable waiver, contractors shall not provide or use as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by an applicable FASCSA order as follows:

(i) For solicitations and contracts awarded by a Department of Defense contracting office, DoD FASCSA orders apply.

(ii) For all other solicitations and contracts, DHS FASCSA orders apply.

(2) The Contractor shall search for the phrase "FASCSA order" in the System for Award Management (SAM) at https:// to locate applicable FASCSA orders.www.sam.gov

(3) The Government may identify in the solicitation other FASCSA orders that are not in SAM, which are effective and apply to the solicitation and resulting contract.

(4) A FASCSA order issued after the date of solicitation applies to this contract only if added by an amendment to the solicitation or modification to the contract (see FAR 40.204-1(c)).

(f) Reasonable inquiry. The contractor shall conduct a reasonable inquiry to determine if there are any prohibited products or services. The inquiry will look at any information in the entity's possession but does not need to include an internal or third-party audit.

(g) Removal of prohibited products and services. For Federal Supply Schedules, Governmentwide acquisition contracts, multi-agency contracts or any other procurement instrument intended for use by multiple agencies, upon notification from the Contracting Officer, during the performance of the contract, the Contractor shall promptly make any necessary changes or modifications to remove any product or service produced or provided by a source that this clause prohibits.

(h) General report.

FA281626Q00020003

(1) If the Contractor identifies or is notified by any source, (including a subcontractor at any tier), that any product or service provided or used (or to be provided or used) during contract performance does not comply with any prohibition in this clause, then the Contractor shall report the following information, or as much information is known, in writing to the contracting office as identified in paragraph (h)(2) within 72 hours:

(i) Contract number and order number, if applicable;

(ii) The specific prohibition the product or service is not complying with;

(iii) A description of the products or services that the Contractor identifies or has reason to suspect is prohibited (include brand; model number, such as the original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable);

(iv) The entity that produced the product or service (include entity name, unique entity identifier, Contractor and Government Entity (CAGE) code, facilities responsible for design, fabrication, assembly, packaging, and test of the product, and whether the entity was the OEM or a distributor (provide manufacturer codes and distributor codes used for the product));

(v) Description of the functionality of the product or service and how that functionality impacts the risk to the product or service;

(vi) An explanation of any factors relevant to determining if the product or service should be permitted by an applicable exception, exemption, or waiver (if the contractor would like the Government to consider a waiver, and asks for such a waiver);

(vii) Whether alternative products or services are available that would comply with the prohibition;

(viii) If the product or service is related to item maintenance, include the following information on the item being maintained:

(A) Brand;

(B) Model number, OEM number, manufacturer part number, or wholesaler number; and

(C) Item description, as applicable.

(ix) Any readily available information about mitigation actions implemented or recommended.

(2) If a report must be submitted to a contracting office, the Contractor shall submit the report as follows:

(i) If a Department of Defense contracting office, the Contractor shall report to the website at . https://dibnet.dod.mil

(ii) For all other contracting offices, the Contractor shall report to the Contracting Officer.

(iii) For indefinite delivery contracts, the Contractor shall report to both the contracting office for the indefinite delivery contract and the contracting office for any affected order.

FA281626Q00020003

https://dibnet.dod.mil/

(3) If the report provided does not contain any of the information required by paragraph (h)(1) of this clause, and the contractor later discovers new information that is required by paragraph (h)(1) of this clause, then the contractor shall submit a subsequent report within 72 hours of discovering…