Exhibit N - Specifications for Concrete Saw 65hp.docx
DOCX document 25 KB Posted
- Attached to
- JPMC Asphalt Equipment
- Solicitation number
- 23-416CMS-BOSS4-B-33802
- Issued by
- Illinois
About this file
This document is the Exhibit N - Specifications for a 65 H.P, Self-Propelled Concrete Cutting Machine, provided by the State of Illinois Department of Central Management Services. It outlines the requirements for a self-propelled concrete cutting machine to be used by the ordering entity for cutting cured, reinforced concrete in highways and bridge decks. The specifications detail the required features and accessories, including engine and power requirements, blade drive and shaft, water system, drivetrain, and wheels. The successful vendor will be required to deliver the machine and provide on-site training for the operators.
The document is related to the JPMC Asphalt Equipment contract opportunity in the state of Illinois. The contract will provide the state with the required concrete cutting equipment, and the vendor will be responsible for delivery, assembly, and operator training.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of Illinois Department of Central Management Services
Exhibit N Specifications for a 65 H.P, Self-Propelled Concrete Cutting Machine This specification describes a self-propelled concrete cutting machine for use by the ordering entity for cutting cured, reinforced concrete in highways and bridge decks. The specifications for acceptable units by required features and accessories as outlined below.
Parts and services for the equipment should be readily available within the State of Illinois.
Unless otherwise specified, the proposed equipment shall be complete in all parts and ready for immediate use upon delivery.
| Make: |
| Model: |
| Manufacturer: |
The State reserves the right to waive minor informalities, deficiencies, or technical variances which by their nature are restrictive to a given manufacturer, if in its’ judgement, it would be in the best interest of the State.
The unit shall include the following standard or optional accessories and equipment.
The machine shall be designed to use rotary diamond segmented saw blades to cut with water.
The saw shall be capable of sawing with 42” diameter blades with a 1” diameter arbor.
The blade drive shaft shall have a minimum of four (4) seals or layers of protection between the ball bearings and outside dirt.
The driveshaft diameter shall be (two) 2”.
| The saw furnished shall be capable of cutting to a depth of no less than 17” with a 42” diameter blade. |
| The unit proposed shall include a cutting depth indicator. |
| The machine shall be equipped with an electro-hydraulic pump, operator adjustable, depth control. |
| The saw shall cut with a downward rotation. |
The unit shall be equipped with a front pointer.
Note: One 42” blade shall be included for training and machine set up.
The saw shall be equipped with an electronic tracking system displayed in/on the screen with the ability to memorize the last used setting.
Engine:
The machine shall be powered by a liquid cooled diesel engine having a horsepower rating of no less than 65 H.P. at governed speed and a minimum of 55 H.P. at the blade shaft.
Component:
The engine shall be equipped with the following:
· Keyed or passcode electric starter.
· Alternator
· Amp meter
· Hour meter
· Battery
· Tachometer
· Current Emissions Standards
All gauges or screens shall be backlit for use in night cutting.
The fuel capacity shall be capable of operating the machine under load for approximately six (6) hours.
Blade Drive & Shaft:
The blade drive shall be belt driven including quad sealed ball or roller bearings.
The power drive shall be totally enclosed and provide variable speed from 0 to ±300 fpm.
The drive shall provide for a downward blade rotation with adjustable blade RPM.
The machine shall be capable of driving the blade from either side of the machine.
Water:
The machine shall be capable of operation of both wet and dry cutting blades.
When operated with water the machine shall feature the following:
· Positive displacement water pump
· Quick-setting cutoff water valve
· Hose
The cutting blade shall be housed in a steel cover with built-in nozzles or applicators to provide water to the blade.
The housing and water capabilities shall be available for easy installation on either side of the machine.
Drivetrain:
The unit shall have hydrostatic drive with balanced dual direct drive motors.
The drive motors shall have infinite speed control and allow the operator to make track adjustments (electronic track control) while in motion.
System shall allow for a return to neutral and memorize last known cut settings.
Wheels:
The machine chassis shall be equipped with no less than four (4) wheels with solid rubber tires.
The wheels shall be equipped with roller or ball bearings with pressure lube fittings.
Startup Service/Training:
The successful vendor shall deliver the machine and send a technician to the delivery destination to completely assemble the machine and set the blade RPM.
The technician shall stay with the crew at the work site to train the operators in the use and adjustment of the saw.
Paint/Finish:
All exterior surfaces normally painted shall be painted or powder coated manufacturer's standard color.
File details come from the government source that posted it. Updated .