Attachment 3 Naples CSO FCAR 2020.pdf
PDF 4 MB Posted
- Attached to
- Sources Sought Notice and Request for Information (RFI) for Total Maintenance Contract (TMC), Italy
- Solicitation number
- DODEAHQ-SS-001
- Issued by
-
Department of Defense Education Activity
About this file
This is a Facility Condition Assessment Report for Building 446 (Naples Community Superintendent's Office) located at Naval Support Activity Naples, Italy, assessed on January 14, 2020.
The facility is a 2,115 gross square foot permanent structure built in 1998 that serves as the Naples Community Superintendent's Office, with approximately 2 percent of the building allocated to the Department of Defense Education Activity (DoDEA) and 98 percent utilized by Naval Support Activity Capodichino Agencies. The building received a Facility Condition Index (FCI) score of 99 and a Q-1 rating, indicating the facility is new or well-maintained in good condition. Key building systems include stucco exterior walls with modified bitumen roof coverings; interior finishes consisting of ceramic tile and carpet flooring, painted hard surface walls, and acoustical lay-in tile ceilings; heating and air conditioning provided by a central plant; original electrical wiring with fluorescent lighting and GFCI receptacles; and original plumbing fixtures with indirect water heaters. The assessment identifies one work item requiring attention: replacement of sanitary waste vent pipe and fittings (D2030 SANITARY WASTE) scheduled for 2020 with a score of 0.00. Critical observations note that the stucco exterior finish on the six-story walls is severely deteriorated with brittle areas and peeling paint, though interior systems are generally in good condition. Several building components including foundations, basement construction, floor construction, roof construction, exterior walls, interior partitions, and stair construction were not evaluated unless significant damage was observed, as these are typically concealed or inaccessible. The facility lacks an intercom system, security system, and security cameras, and has minimal parking capacity for one privately owned vehicle.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
"identification only"
II. SCHOOL PHYSICAL DESCRIPTION
The summary below provides a physical description of the Naples Community Superintendent's Office. When multiple systems or materials are present, the predominant system or material observed during the facility condition assessment is shown.
a. STRUCTURAL/EXTERIOR ENCLOSURE: The building exterior is stucco. Roof coverings are modified bitumen. Exterior doors are pre-finished aluminum with glazing. Window systems are pre-finished aluminum with double-glazing.
b. INTERIORS: Floor finishes used include ceramic tile and carpet. Walls are painted hard surfaces.
Ceilings are acoustical lay-in tiles.
c. MECHANICAL: The Community Superintendent's Office facility has heating, which is provided by a central plant. The facility has air conditioning, which is provided by a central plant.
d. ELECTRICAL: No electrical upgrades have been completed, and most wiring appears to be original.
Lighting is typically lay-in fixtures with fluorescent lamps. Ground-fault circuit interrupter (GFCI) receptacles appear to be present in required locations. The Community Superintendent's Office does not have an intercom system. There is no security system, and security cameras are not present.
e. PLUMBING: Plumbing fixtures and piping are original. Domestic hot water is provided by indirect water heaters.
f. SITE: The Community Superintendent s Office has parking for approximately one privately owned vehicle.
g. LIFE SAFETY: A fire safety inspection report was not available for review.
Appendix A
Site Plan
Appendix B
Overview of Sustainment Management System (SMS) and
BUILDER™ Engineered Management System (EMS)
Overview of Sustainment Management System (SMS) and BUILDER™ Engineered Management System (EMS)
Sustainment Management System (SMS)
The Sustainment Management System (SMS) is a suite of web-based software applications developed by the
United States Army Corps of Engineers - Engineer Research Development Center - Construction Engineering
Research Laboratory (USACE-ERDC-CERL) to help facility engineers, technicians, and managers decide when, where, and how to best maintain the built environment. The SMS modules include BUILDER™ and
ROOFER™ for assessing building conditions, PAVER™ for pavements, and RAILER™ for railroad infrastructure.
Because real property assets are so vast and diverse, a "knowledge-based" philosophy drives the SMS process. The process starts with the automated download of real property data, and then more detailed system inventory is modeled and/or collected which identifies components and their key life cycle attributes such as the age and material.
From this inventory, Condition Index (CI) measures for each component are predicted based on its expected stage in the life cycle. Objective and repeatable inspections can then be performed on various components to verify their condition with respect to he expected life cycle deterioration. The level of detail and frequency of these inspections are not fixed like other processes; they are dependent on knowledge of component criticality, the expected and measured condition and rate of deterioration, and remaining maintenance and service life. This "knowledge-based" inspect on focuses attention to the most critical components at the time.
In addition to these condition assessments, functionality assessments can be performed to evaluate user requirement changes, compliance and obsolesce ce issues. This provides a comprehensive picture of the overall performance of real property assets and their key components.
BUILDER Engineered Management System (EMS)
In September 2013, the Under Secretary of Defense, Frank Kendall, issued a memo indicating the Department of Defense requires a standardized process for facility condition assessments to ensure consistent and reliable data necessary for sound strategic investment decisions in managing the Department's built environment.
Establishing a DoD-wide facility condition assessment process will contribute to a more credible DoD asset management program and will support better buying power by allowing Department leadership to better target fiscal resources to those facilities most in need of investment. Further, adopting a standard process will help ensure that condition data will be audit-ready in accordance with the Under Secretary of Defense (Comptroller)'s "Financial Improvement and Readiness Guidance" issued in March 2013.
The facility condition assessment process used to generate this report is based on BUILDER Engineered Management System (EMS) Version 3. BUILDER EMS was developed by the Engineer Research and Development Center.
The facility condition assessment process addresses the requirements necessary for routine building facility management activities, including long range budgeting and sustainment/restoration/modernization (SRM) planning. This assessment approach provides an objective and generalized framework to help to identify problem areas that will require more investigation through detailed or specialized assessments. There may be times when detailed engineering assessments may be required to diagnose specific problems.
BUILDER is a software application for building asset life cycle management. The primary focus of BUILDER is work plan development. BUILDER stores real property building information and more detailed system inventory is modeled and/or collected which identifies building components and their key life cycle attributes such as the age, material and capacity. Inspections are then performed on the various components to determine an objective and repeatable Condition Index (CI) measure, which relates the general physical health of the asset.
With information about condition and remaining service life, BUILDER guides the development of short- and long-range work plans based on sound investment strategies, prioritization criteria, and budget constraints.
BUILDER consolidates a variety of building-related management issues into a single decision-support package.
The system gives functional managers and decision-makers instant access to building inventory, current building condition indices, and probabilities condition prediction models. It also employs a patented knowledge-based inspection scheduling process. BUILDER improves the allocation process and return of building life cycle investments by directing resources to the most condition critical components to avoid costly repair penalty costs, as well as, the most mission critical components to manage risks of failure.
BUILDER Facility Condition Assessment Process
Facility Condition Assessment (FCA) is one of the primary processes of a facility life cycle asset management program. The FCA process results in a better understanding of the physical condition and readiness of an organization's buildings along with the reliability of its systems and components. It also facilitates the identification of work candidates for facility SRM repair projects. It is a critical aspect of the shift towards a proactive versus reactive facility management strategy. Instead of keeping facilities operational by relying primarily on corrective repairs (after a system or component has failed due to significant loss of function), it focuses on condition-based repairs which can be planned prior to failure. A condition-based approach can result in higher performing facilities at lower life cycle costs.
Prior to an assessment, knowledge of the building systems and components present is necessary, since assessments are done against these components, not against the building as a whole. This information about the systems and components that make up a building is called the BUILDER Inventory. BUILDER has a vast library of predefined components which an as essor will select from, and the inventory collection process involves identifying the type, quantity, and year installed for all pertinent components. These components are also organized into systems and sub-systems according to the UNIFORMAT classification hierarchy. When a specific instance of a component is recorded, this is called a component-section in BUILDER, and represents a single component assembly or colle tion of like components to be managed as a single unit. The BUILDER facility condition assessment process directly supports the computation of a condition index for building component-sections, known as the Component-Section Condition Index (CSCI), which is the fundamental metric used in BUILDER. The CSCI is aggregated to compute a condition index metric at the system (SCI), building (BCI), and site/organizational levels.
A condition-based facility repair strategy requires condition information be collected at a component level, and that this condition information relate to loss of component function. Every component of a building has a primary function that it performs. This function is the reason that the component was constructed or installed in the building. It may also serve a number of secondary or tertiary functions. For example, for a door component, the primary function is to provide safe entry/egress of authorized movements while limiting unwanted movements of people (security), or other objects (water or moisture). The secondary functions would relate to aesthetics and thermal and air control, among others.
The condition assessment process in BUILDER uses the Direct Rating method.
1. The Direct Rating method uses a single qualitative rating for each component based on condition observations. This also results in a condition index metric, which relates to the level of deterioration and the loss of function. This abbreviated Direct Rating approach is often better suited to initial baseline assessments where the components are inventoried, and data is initially loaded into BUILDER.
BUILDER Report Overview
Outlined below is a summary and description of the reports that are included.
Appendix C - Facility Summary Report – Provides a summation of FCA results. A Building Summary Report is included for each building that is considered permanent or semi-permanent construction and receives a Q-Rating. The purpose of this report is to provide a general overview of the building including key performance indicators. This report was generated using DoDEA's calculated Replacement Cost overwriting the data populated from real property records. This provides a more accurate Replacement Cost due to the inconsistencies with real property reconciliation between DoDEA and the Services. The DoD Facility Pricing Guide and DoDEA measurements for building square footage were used to calculate the Replacement Cost.
Appendix D - System Summary Report – Provides an overview of inspected systems and their condition index rating. A Building System Condition Index (SCI) By System Report is included for each building that is considered permanent or semi-permanent construction and receives a Q-Rating.
Appendix E - Work Items By Building – Provides a list of work items requiring repair or replacement of system/components, including budgets, for project planning purposes. A Work Plan Detail by Year Report is included for each building that is considered permanent or semi-permanent construction and receives a Q- Rating.
Appendix F - Remaining Service Life (RSL) Detail Report – Provides a detailed overview of systems/components, including descr ptions, and their respective age, remaining service life and remaining paint life.
Appendix G - Direct Condition Rating Inspection By Section Report – Provides a summary of direct condition ratings for each component-section collected within each facility.
Appendix H - System Inventory Report – Prov des a list of details for each component-section collected within each facility.
Appendix I - Fire Inspection Safety Report – This appendix is only applicable when a Fire Inspection Safety Report is provided at the time of the assessment for inclusion in the Facility Condition Assessment Report.
The report provides a summary of the recent Fire Inspection to include any deficiencies.
Note: All reports are generated from the DoDEA BUILDER database. n the event line items within a report are compressed and difficult to read, this is a result of how BUILDER generates the report. It is our understanding that CERL is working to update the report format.
Appendix C
Facility Summary Report
Appendix D
System Summary Report
Appendix E
Work Items By Building
D20 PLUMBING2020
1998 D203002 VENT PIPE & FITTINGS General 62 (EA) Replace 0.00D2030 SANITARY WASTE
-- Replace D2030 SANITARY WASTE 1998 D203002 VENT PIPE & FITTINGS General
Support Site
Year System
Completion Date
Qty (UM) CostActivity
Section Description
Component Status
-- Description
ScoreProject
Naples CSO (HE5605)446* - Naples CSO Bldg 446*
Cost Book: Reference
Work Items by Building Report
Page 1 of 1April 28, 2020
Appendix F
Remaining Service Life (RSL) Detail Report
B20 EXTERIOR ENCLOSURE B2010 EXTERIOR WALLS 1998 B201001 EXTERIOR CLOSURE Stone 22 50 B2010 EXTERIOR WALLS 1998 B201001 EXTERIOR CLOSURE Stucco 22 21 B2010 EXTERIOR WALLS 1998 B201007 EXTERIOR SOFFITS General 22 13 5 B2010 EXTERIOR WALLS 1998 B201010 EXTERIOR JOINT SEALANT General 22 10 B2020 EXTERIOR WINDOWS 1998 B202001 WINDOWS Aluminum Windows 22 39 B2020 EXTERIOR WINDOWS 1998 B202002 STOREFRONTS General 22 10 B2030 EXTERIOR DOORS 998 B203090 OTHER EXTERIOR SPECIALTY DOORS Emergency Egress
D 22 10 4
C10 INTERIOR
CONSTRUCTION
C1010 PARTITIONS 1998 C101001 FIXED PARTITIONS Wall - Concrete Block 22 50 Unknown C1010 PARTITIONS 1998 C101001 FIXED PARTITIONS Wall - Drywall w/Stud Framing 22 33 Unknown C1020 INTERIOR DOORS 1998 C102001 STANDARD INTERIOR DOORS Wood Door/Wood Frame 1 26 C1030 SPECIALTIES 1998 C103009 CABINETS Other 1 13 C1030 SPECIALTIES 1998 C103010 CASEWORK General 1 13
C30 INTERIOR FINISHES C3010 WALL FINISHES 1998 C301004 TILE & TERRAZZO WALL FINISHES General 1 50 C3020 FLOOR FINISHES 1998 C302001 TILE FLOOR FINISHES Ceramic Tile 1 50 C3020 FLOOR FINISHES 1998 C302005 CARPETING General 1 4 C3030 CEILING FINISHES 1998 C303001 ACOUSTICAL CEILING TILES & PANELS General 1 46 C3030 CEILING FINISHES 1998 C303005 SUSPENSION SYSTEMS General 1 13
D20 PLUMBING D2010 PLUMBING FIXTURES 1998 D201001 WATERCLOSETS General 1 13 D2010 PLUMBING FIXTURES 1998 D201004 SINKS General 1 13 D2010 PLUMBING FIXTURES 1998 D201004 SINKS Stainless 1 13
D2020 DOMESTIC WATER
DISTRIBUTION
1998 D202001 PIPES & FITTINGS General 22 28 D2030 SANITARY WASTE 1998 D203001 WASTE PIPE & FITTINGS General 22 28 D2030 SANITARY WASTE 1998 D203002 VENT PIPE & FITTINGS General 22 0
D30 HVAC D3040 DISTRIBUTION SYSTEMS 1998 D304001 AIR DISTRIBUTION, HEATING & COOLING Ductwork 22 18 D3040 DISTRIBUTION SYSTEMS 1998 D304007 EXHAUST SYSTEMS Fan System, Residential Exhaust 1 26
D40 FIRE PROTECTION D4010 FIRE ALARM AND DETECTION
SYSTEMS
1998 D401001 FIRE ALARM DISTRIBUTION Other 1 19 D4040 SPRINKLERS 1998 D404001 SPRINKLERS AND RELEASING DEVICES Wet Pipe Systems 1 74
D50 ELECTRICAL D5020 LIGHTING & BRANCH WIRING 1998 D502001 BRANCH WIRING General 1 59
Naples CSO (HE5605)446* - Naples CSO Bldg 446*
Section Description Age (yrs) RSL (yrs) RPL (yrs)ComponentSystem
Support Site
Remaining Service Life (RSL) Detail Report
D5020 LIGHTING & BRANCH WIRING 1998 D502002 LIGHTING EQUIPMENT Exit Lighting 1 13
Page 1 of 2April 28, 2020
D5020 LIGHTING & BRANCH WIRING 1998 D502002 LIGHTING EQUIPMENT Exterior Lighting 22 10 D5020 LIGHTING & BRANCH WIRING 1998 D502002 LIGHTING EQUIPMENT General 1 13
D5090 OTHER ELECTRICAL
SERVICES
1998 D509002 EMERGENCY LIGHTING & POWER General 1 19
Naples CSO (HE5605)446* - Naples CSO Bldg 446*
Section Description Age (yrs) RSL (yrs) RPL (yrs)ComponentSystem
Support Site
Remaining Service Life (RSL) Detail Report
Page 2 of 2April 28, 2020
Appendix G
Direct Condition Rating Inspection By Section Report
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
The exterior stone wainscot at walls and columns, is generally in good condition. However, there are some damaged areas of trim.Inspection Comments:
B2010 EXTERIOR WALLS 300 (SF)B20 EXTERIOR ENCLOSURE1998 B201001 EXTERIOR CLOSURE Stone
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G- Inspection
Inspection Comments:
B2010 EXTERIOR WALLS 500 (SF)B20 EXTERIOR ENCLOSURE1998 B201001 EXTERIOR CLOSURE Stucco
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G G InspectionPaint Rating:
Inspection Comments:
B2010 EXTERIOR WALLS 800 (SF)B20 EXTERIOR ENCLOSURE1998 B201007 EXTERIOR SOFFITS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G- Inspection
Inspection Comments:
B2010 EXTERIOR WALLS 250 (LF)B20 EXTERIOR ENCLOSURE1998 B201010 EXTERIOR JOINT SEALANT General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G- Inspection
Inspection Comments:
B2020 EXTERIOR WINDOWS 6 (EA)B20 EXTERIOR ENCLOSURE1998 B202001 WINDOWS Aluminum Windows
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G- Inspection
Inspection Comments:
B2020 EXTERIOR WINDOWS 96 (SF)B20 EXTERIOR ENCLOSURE1998 B202002 STOREFRONTS General
B2030 EXTERIOR DOORS 4 (EA)B20 EXTERIOR ENCLOSURE1998 B203090 OTHER EXTERIOR SPECIALTY DOORS
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Support Site
ComponentSection Description Quantity (UM)System
Direct Condition Rating Inspection Report by Section
Page 1 of 5April 28, 2020
14-Jan-2020 No Inspection Source:
G- G- InspectionPaint Rating:
Inspection Comments:
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G G InspectionPaint Rating:
Inspection Comments:
C1010 PARTITIONS 105 (SF)C10 INTERIOR CONSTRUCTION1998 C101001 FIXED PARTITIONS Wall - Concrete Block
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G G InspectionPaint Rating:
Inspection Comments:
C1010 PARTITIONS 2,200 (SF)C10 INTERIOR CONSTRUCTION1998 C101001 FIXED PARTITIONS Wall - Drywall w/Stud
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C1020 INTERIOR DOORS 2 (EA)C10 INTERIOR CONSTRUCTION1998 C102001 STANDARD INTERIOR DOORS Wood
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C1030 SPECIALTIES 15 (LF)C10 INTERIOR CONSTRUCTION1998 C103009 CABINETS Other
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C1030 SPECIALTIES 6 (LF)C10 INTERIOR CONSTRUCTION1998 C103010 CASEWORK General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C3010 WALL FINISHES 190 (SF)C30 INTERIOR FINISHES1998 C301004 TILE & TERRAZZO WALL FINISHES General
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Support Site
ComponentSection Description Quantity (UM)System
Direct Condition Rating Inspection Report by Section
Page 2 of 5April 28, 2020
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C3020 FLOOR FINISHES 150 (SF)C30 INTERIOR FINISHES1998 C302001 TILE FLOOR FINISHES Ceramic Tile
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C3020 FLOOR FINISHES 1,965 (SF)C30 INTERIOR FINISHES1998 C302005 CARPETING General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C3030 CEILING FINISHES 2,115 (SF)C30 INTERIOR FINISHES1998 C303001 ACOUSTICAL CEILING TILES & PANELS
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
C3030 CEILING FINISHES 2,115 (SF)C30 INTERIOR FINISHES1998 C303005 SUSPENSION SYSTEMS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
D2010 PLUMBING FIXTURES 1 (EA)D20 PLUMBING1998 D201001 WATERCLOSETS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
D2010 PLUMBING FIXTURES 1 (EA)D20 PLUMBING1998 D201004 SINKS General
D2010 PLUMBING FIXTURES 1 (EA)D20 PLUMBING1998 D201004 SINKS Stainless
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Support Site
ComponentSection Description Quantity (UM)System
Direct Condition Rating Inspection Report by Section
Page 3 of 5April 28, 2020
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-1998 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D2020 DOMESTIC WATER DISTRIBUTION 506 (LF)D20 PLUMBING1998 D202001 PIPES & FITTINGS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-1998 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D2030 SANITARY WASTE 253 (LF)D20 PLUMBING1998 D203001 WASTE PIPE & FITTINGS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-1998 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D2030 SANITARY WASTE 62 (EA)D20 PLUMBING1998 D203002 VENT PIPE & FITTINGS General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-1998 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D3040 DISTRIBUTION SYSTEMS 394 (LF)D30 HVAC1998 D304001 AIR DISTRIBUTION, HEATING & COOLING
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
D3040 DISTRIBUTION SYSTEMS 2 (EA)D30 HVAC1998 D304007 EXHAUST SYSTEMS Fan System, Residential
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-2019 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D4010 FIRE ALARM AND DETECTION SYS 2,115 (SF)D40 FIRE PROTECTION1998 D401001 FIRE ALARM DISTRIBUTION Other
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Support Site
ComponentSection Description Quantity (UM)System
Direct Condition Rating Inspection Report by Section
Page 4 of 5April 28, 2020
01-Jan-2019 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D4040 SPRINKLERS 11 (SF)D40 FIRE PROTECTION1998 D404001 SPRINKLERS AND RELEASING DEVICES Wet
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-2019 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D5020 LIGHTING & BRANCH WIRING 2,115 (SF)D50 ELECTRICAL1998 D502001 BRANCH WIRING General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
D5020 LIGHTING & BRANCH WIRING 3 (EA)D50 ELECTRICAL1998 D502002 LIGHTING EQUIPMENT Exit Lighting
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G- Inspection
Inspection Comments:
D5020 LIGHTING & BRANCH WIRING 1 (EA)D50 ELECTRICAL1998 D502002 LIGHTING EQUIPMENT Exterior Lighting
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
14-Jan-2020 No Inspection Source:
G Inspection
Inspection Comments:
D5020 LIGHTING & BRANCH WIRING 2,115 (SF)D50 ELECTRICAL1998 D502002 LIGHTING EQUIPMENT General
Last Inspection Date: Condition Rating: Used Sampling?
Inspector:
01-Jan-2019 No Inspection Source:
G+ InstallDate
Original InspectionInspection Comments:
D5090 OTHER ELECTRICAL SERVICES 2,115 (SF)D50 ELECTRICAL1998 D509002 EMERGENCY LIGHTING & POWER General
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Support Site
ComponentSection Description Quantity (UM)System
Direct Condition Rating Inspection Report by Section
Page 5 of 5April 28, 2020
Appendix H
System Inventory Report
B20 EXTERIOR ENCLOSURE 300 (SF) 19981998 B201001 EXTERIOR CLOSURE StoneB2010 EXTERIOR WALLS 500 (SF) 19981998 B201001 EXTERIOR CLOSURE StuccoB2010 EXTERIOR WALLS 800 (SF) 1998 19981998 B201007 EXTERIOR SOFFITS GeneralB2010 EXTERIOR WALLS 250 (LF) 19981998 B201010 EXTERIOR JOINT SEALANT GeneralB2010 EXTERIOR WALLS
6 (EA) 19981998 B202001 WINDOWS Aluminum WindowsB2020 EXTERIOR WINDOWS 96 (SF) 19981998 B202002 STOREFRONTS GeneralB2020 EXTERIOR WINDOWS 4 (EA) 1998 19981998 B203090 OTHER EXTERIOR SPECIALTY DOORS Emergency
Egress Door
B2030 EXTERIOR DOORS
C10 INTERIOR
CONSTRUCTION
105 (SF) 1998 20191998 C101001 FIXED PARTITIONS Wall - Concrete BlockC1010 PARTITIONS 2,200 (SF) 1998 20191998 C101001 FIXED PARTITIONS Wall - Drywall w/Stud FramingC1010 PARTITIONS
2 (EA) 20191998 C102001 STANDARD INTERIOR DOORS Wood Door/Wood Frame
C1020 INTERIOR DOORS
15 (LF) 20191998 C103009 CABINETS OtherC1030 SPECIALTIES 6 (LF) 20191998 C103010 CASEWORK GeneralC1030 SPECIALTIES
C30 INTERIOR FINISHES 190 (SF) 20191998 C301004 TILE & TERRAZZO WALL FINISHES GeneralC3010 WALL FINISHES 150 (SF) 20191998 C302001 TILE FLOOR FINISHES Ceramic TileC3020 FLOOR FINISHES
1,965 (SF) 20191998 C302005 CARPETING GeneralC3020 FLOOR FINISHES 2,115 (SF) 20191998 C303001 ACOUSTICAL CEILING TILES & PANELS GeneralC3030 CEILING FINISHES 2,115 (SF) 20191998 C303005 SUSPENSION SYSTEMS GeneralC3030 CEILING FINISHES
D20 PLUMBING 1 (EA) 20191998 D201001 WATERCLOSETS GeneralD2010 PLUMBING FIXTURES 1 (EA) 20191998 D201004 SINKS GeneralD2010 PLUMBING FIXTURES 1 (EA) 20191998 D201004 SINKS StainlessD2010 PLUMBING FIXTURES
506 (LF) 19981998 D202001 PIPES & FITTINGS GeneralD2020 DOMESTIC WATER
DISTRIBUTION
253 (LF) 19981998 D203001 WASTE PIPE & FITTINGS GeneralD2030 SANITARY WASTE 62 (EA) 19981998 D203002 VENT PIPE & FITTINGS GeneralD2030 SANITARY WASTE
D30 HVAC 394 (LF) 19981998 D304001 AIR DISTRIBUTION, HEATING & COOLING
Ductwork
D3040 DISTRIBUTION SYSTEMS
2 (EA) 20191998 D304007 EXHAUST SYSTEMS Fan System, Residential Exhaust
D3040 DISTRIBUTION SYSTEMS
D40 FIRE PROTECTION 2,115 (SF) 20191998 D401001 FIRE ALARM DISTRIBUTION OtherD4010 FIRE ALARM AND DETECTION
SYSTEMS
11 (SF) 20191998 D404001 SPRINKLERS AND RELEASING DEVICES Wet Pipe Systems
D4040 SPRINKLERS
D50 ELECTRICAL
Support Site
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Yr PaintedYr. InstalledQuantity (UM)Section DescriptionComponentSystem
System Inventory Report
2,115 (SF) 20191998 D502001 BRANCH WIRING GeneralD5020 LIGHTING & BRANCH WIRING
* Next to year Indicates that date is estimated based on building age.
Source Notations: 1 = COPY, 2 = RAPID DATA ENTRY, 3 = TEMPLATE , 4 = ROOFER, 5 = ROOFER
Page 1 of 2April 28, 2020
3 (EA) 20191998 D502002 LIGHTING EQUIPMENT Exit LightingD5020 LIGHTING & BRANCH WIRING 1 (EA) 19981998 D502002 LIGHTING EQUIPMENT Exterior LightingD5020 LIGHTING & BRANCH WIRING
2,115 (SF) 20191998 D502002 LIGHTING EQUIPMENT GeneralD5020 LIGHTING & BRANCH WIRING 2,115 (SF) 20191998 D509002 EMERGENCY LIGHTING & POWER GeneralD5090 OTHER ELECTRICAL
SERVICES
Support Site
446* - Naples CSO Bldg 446* Naples CSO (HE5605)
Yr PaintedYr. InstalledQuantity (UM)Section DescriptionComponentSystem
System Inventory Report
* Next to year Indicates that date is estimated based on building age.
Source Notations: 1 = COPY, 2 = RAPID DATA ENTRY, 3 = TEMPLATE , 4 = ROOFER, 5 = ROOFER
Page 2 of 2April 28, 2020
File details come from the government source that posted it. Updated .