COMET RFP 80KSC022R0004 Appendix Portfolio.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

COMET RFP No. 80KSC022R0004 APPENDIX 01

APPENDIX 01

RESERVED

COMET RFP No. 80KSC022R0004 APPENDIX 02

APPENDIX 02

COMPLIANCE AND REFERENCE

DOCUMENTS

Document Number Document Name Compliance/Reference/Tailorable

14 CFR Part 1232 Care and Use of Animals in the Conduct of NASA Activities C

15 CFR Parts 730-774 Export Administration Regulations (EAR). C

22 CFR Parts 120-130 International Traffic in Arms Regulations (ITAR) C

27 CFR § 447.53 Exemptions C

29 CFR 1926.20 General Safety And Health Provisions C

36 CFR Parts 1220-1238 Federal Records; General R

44 U.S.C. 3501 et seq Paperwork Reduction Act R

44 U.S.C. Chapters 29, 31, 33 Records Management R

48 CFR Chapter 18 Records R

ANSI S20.20 Standard for the Development of an Electrostatic Discharge Control Program

C

ANSI/EIA-859 Data Management R

DoD 5220.22 National Industrial Security Program C

COMPLIANCE AND REFERENCE DOCUMENTS

Appendix 2, Compliance and Reference Documents , contains a listing of documents referenced within the COMET Performance Work Statement and Data Requirement Deliverables.

The list stipulates whether the document is a compliance, reference or tailorable (see PWS 1.0.4). The contractor shall use the latest approved version available.

DoD 8523.01 Communications Security (COMSEC) C

EIA-836 Configuration Management Data Exchange and Interoperability C

ESD 10009 Human Rating Certification Package C

ESD 10010 Exploration Systems Development Safety and Mission Assurance Plan C

ESD 10020 ESD Certification of Flight Readiness (CoFR) Plan R

ESD 10020 ANX02 ESD CoFR Plan, Annex 02; Pre-Flight Readiness Review Plan R

ESD 10020 ANX03 ESD CoFR Plan, Annex 03; Agency Flight Readiness Review (FRR) Plan R

ESD 10020 ANX04 ESD CoFR Plan, Annex 04; Integrated System and Mission Certification (ISMC) Review Plan

R

Executive Order 13693 Planning for Federal Sustainability in the Next Decade C

Executive Order 12656 Assignment of Emergency Preparedness Responsibilities Sections 201, 202, 1901 and 2001

FIPS Pub 140-2 Federal Information Processing Standards - Security Requirements for Cryptographic Modules

FITARA Federal IT Acquisition Reform Act (FITARA) C

GEIA-HB-859 Implementation Guide for Data Management R

GSDO-ACO-1010 EGS Program Architectures and Concept of Operations R

GSDO-ANA-1056 EGS Program System Safety Assessment Report, Stacking System Acceptance Review/Operational Readiness Review Maturity

GSDO-ICD-1250 EGS Program Element-to-Element Interface Control Document R

GSDO-ICD-1250 Appendix A EGS Program ICD, Appendix A - ML TO VAB Interfaces R

GSDO-ICD-1250 Appendix B EGS Program ICD, Appendix B -ML TO Pad Interfaces R

GSDO-ICD-1250 Appendix C EGS Program ICD, Appendix C - ML TO CT Interfaces R

GSDO-ICD-1250 Appendix D EGS Program ICD, Appendix D -ML TO Parksite Interfaces R

GSDO-ICD-1250 Appendix E EGS Program ICD, Appendix E - ML TO VAB Interface Drawings R

GSDO-ICD-1250 Appendix F EGS Program ICD, Appendix F -ML TO Pad Interface Drawings R

GSDO-PLN-1001 EGS Program Information and Configuration Management Plan R

GSDO-PLN-1002 EGS Program Systems Engineering Management Plan (Sec 3.6.2 & 7.4 Excluded)

GSDO-PLN-1013 EGS Program Risk Management Plan R

GSDO-PLN-1024 EGS Program Integrated Logistics Support Plan R

GSDO-PLN-1027 Cross-Program Ground Hardware/Software Acceptance Data Package Plan C

GSDO-PLN-1036 EGS Program Safety and Mission Assurance Plan R

GSDO-PLN-1043 EGS Program Master Subsystems List R

GSDO-PLN-1043-ANX-01 EGS Program Subsystem Certification Log for Artemis I R

GSDO-PLN-1046 EGS Program Software Management Plan R

GSDO-PLN-1047-ANX01 GSDO Program Schedule Management Plan Annex 1: Schedule Standards and Guidelines

GSDO-PLN-1070 Cross-Program Logistics Integration Plan C

GSDO‐PLN‐1073 Cross Program Launch Site Integrated Test and Checkout Plan R

GSDO-PLN-1075 Cross-Program Ground Support Equipment Sustaining Engineering Plan C

GSDO-PLN-1076 Cross-Program Operations and Maintenance Requirements and Specifications Management Plan

GSDO-PLN-1077 EGS Program Launch Control Center Firing Room Management Plan R

GSDO-PLN-1079 EGS Program Requirements Management Plan R

GSDO-PLN-1083 EGS Program Mishap Preparedness and Contingency Plan R

GSDO-PLN-1088 Kennedy Space Center and Exploration Ground Systems Program Certification of Flight Readiness Plan

GSDO-PLN-1094 GSDO Electromagnetic Environmental Effects Control Plan R

GSDO-PLN-1129-ANX-01 Cross-Program Integrated Launch Operations Implementation Plan, Annex- 01; Launch Control Team Firing Room Seating Plan

GSDO-PLN-1142 EGS Program Operations and Maintenance Controlled Requirements Management Plan

GSDO-PLN-1143 Cross-Program Flight Hardware and Software Acceptance Data Package Plan

GSDO‐PLN‐1155 Cross-Program Landing and Recovery Nominal End-of-Mission Recovery Plan

GSDO-PLN-1157 EGS Program Space Launch System/Orion Launch and Recovery Team Training Plan

GSDO‐PLN‐1160 Cross-Program Interface Verification Test - Test Plan R

GSDO‐PLN‐1173 EGS Program Orion Crew Module Transportation Plan Naval Base San Diego to Kennedy Space Center – Over Road

GSDO-PLN-1181 Cross-Program Facilities Contamination Control Implementation Plan C

GSDO-PLN-1183 EGS Program Ground Operations Management Plan R

GSDO-PLN-1195 Cross-Program Processes and Agreements for Launch Site Ground Operations

GSDO-PLN-1211 EGS Program Launch Control Center Firing Room Set Scheduling Plan R

GSDO-PLN-1229 EGS Program Sustaining Engineering Plan R

GSDO-PLN-1232 Cross-Program Quality Planning Requirements Document Plan C

GSDO‐PLN‐1242 GSDO Program Payload Integration Plan R

GSDO-PLN-1244 EGS Program Export Control Plan R

GSDO-PLN-1260 Cross-Program Flight Asset Turnover Plan C

GSDO-PLN-1261 EGS Program Post-Flight Assessment Plan C

GSDO-PLN-1276 EGS Program Human Systems Integration Plan R

GSDO-RQMT-1080 Cross-Program Contamination Control Requirements C

GSDO-RQMT-1146 Cross-Program Launch Commit Criteria Management System Data Requirements and Design Specifications

GSDO-RQMT-1243 EGS Program Generic Launch Site Support and Requirements Document C

GSDO-RQMT-1243-02 EGS Program Launch Site Support and Requirements Document Volume 02;

Outstanding Moon Exploration Technologies Demonstrated by Nano Semi- Hard Impactor

GSDO-RQMT-1243-03 EGS Program Launch Site Support and Requirements Document Volume 03;

Artemis I Internal

GSDO-RQMT-1256 EGS Program Operational Safety Requirements C

GSDO-SPEC-1262 EGS Program Engineering Model Delivery Standard C

GSDO-SPEC-1290 EGS Program Technical Operating Procedure Requirements R

JPD 357 Delegation of Scrap and Downgrade Cost-Approval and Signature Authority C

K0000111995-SPC SCCS Project System Build Software Design Description (SDD) R

K0000112994-PLN Ground Elements Command Control & Communications Project Lunch Control Subsystem (LCS) Build Plan

K0000112995-SPC SCCS Project System Design Document Volume 1 R

K0000118138-SPC SCCS Project System Design Document Volume 2 R

K0000118139-SPC SCCS Project System Design Document Concepts of Execution Development Offline Support and Training Volume 4

K0000119370-PLN SCCS Project Hardware Development Plan (HDP) R

K0000136630-PLN E2E Command and Control (E2E CC) System Hardware Assurance Plan R

K0000137694-PLN SCCS Configuration Management Plan (CMP) R

K0000142173-PLN E2E Command and Control (E2E CC) Software Development Plan for Ground Support Equipment (GSE) Subsystem Software (Volume 3)

K0000143172-PLN E2E Command and Control (E2E CC) System Software Development Plan (SDP) Spaceport Command and Control System (SCCS) Software (Volume 2)

K0000143174-PLN E2E Command and Control (E2E CC) Software Development Plan for Models and Simulation (Volume 4)

K0000148049-PLN E2E Command and Control (E2E CC) System Software Development Plan Customer Avionics Interface, Development and Analysis (CAIDA) (Volume 5)

K0000222197-PLN E2E Command and Control (E2E CC) Software Development Plan for Special GSE Subsystem Software (Volume 6)

K0000254500-GEN

E2E Command and Control (E2ECC) Ground Support Equipment (GSE)/Ground & Flight Application Software Team (GFAST) Subsystem implementation standards

K0000258867-SPC CDIT - Facility Breathing Air Subsystem R

K0000257459-SPC CDIT - Fire Suppression Subsystem R

K0000258868-SPC CDIT - Facility Gaseous Helium (GHe) R

K0000258869-SPC CDIT - Facility Gaseous Nitrogen (GN2) R

K0000258870-SPC CDIT - Compressed Air (CAIR) Subsystem R

K0000258871-SPC CDIT - Crawler Transporter R

K0000258872-SPC CDIT - Heating Ventilation Air Conditioning (HVAC) Subsystem R

K0000258873-SPC CDIT - KCCS R

K0000258875-SPC CDIT - 60Hz Power Interface Table R

K0000263040-SPC CDIT - Kennedy Integrated Transmission System R

741EMM00001 CDIT - Mobile Launcher Physical Data Interface (MPDI) R

K0000261886-PLN E2E Command and Control Software Development Plan, Ground Flight Applications Software (Volume 7)

K0000349708-PLN E2E Command and Control Software Development Plan Recording & Playback Subsystem (Volume 9)

K0000435411-PLN E2E Command and Control Software Development Plan EGS Simulation Subsystem (Volume 8)

K0000064476-PLN E2E Command and Control System Software Development Plan (Volume 1) R

KDP-KSC-P-1284 General Services Administration (GSA)/NASA Vehicle Process C

KDP-KSC-P-1319 Facility Project Approval and Implementation Guidance for Local Authority (LA) Projects

KDP-KSC-P-1537 Document Release Authorization (DRA) Process R

KDP-KSC-P-2393 KSC Lessons Learned System R

KDP-KSC-P-3339 KSC Information Technology Acquisition Management (ITAM) Process for Information Technology (IT) Good or Services

KDP-KSC-P-3621 Ground Based Pressure Vessels and Pressurized Systems (PVS)Certification R

KDP-KSC-P-6000.1 Requests for Government Owned Vehicles License Plates C

KDP-P-1702 Risk Assessment ER&T/ISS Program R

KDP-P-1763 Customs Support Imports R

KDP-P-1788 Customs Support Exports R

KDP-P-2712 Process for Assigning Document Numbers In KDDMS T

KDP-P-2713 Technical Review Process T

KDP-P-2718 Engineering Documentation Electronic Approval, Release and Revision Process

T

KDP-P-2723 Streamlined Design Process T

KDP-P-3627 NASA Corrective Action Request (NCAR) R

KDP-P-3929 Software Sustainment R

KDP-P-5031 Concept Development Process T

KDP-P-5032 Preliminary Design Process T

KDP-P-5033 Final Design Process T

KDP-P-5034 System Implementation Process T

KDP-P-5035 System Acceptance Process T

KDP-P-5036 System Transition Process T

KDP-P-5037 System Sustainment Process T

KDP-P-5038 Project Close-out Process T

KNPD 1860.1 KSC Radiation Protection Program R

KNPR 1040.3 Continuity of Operations Planning (COOP) Procedural Requirements R

KNPR 1440.6 KSC Records Management Programs R

KNPR 1600.1 KSC Security Procedural Requirements C

KNPR 1820.3 KSC Hearing Loss Prevention Program T

KNPR 1820.4 KSC Respiratory Protection Program T

KNPR 1840.1 KSC Hazard Communication Program R

KNPR 1840.19 KSC Industrial Hygiene Programs T

KNPR 1860.1 KSC Ionizing Radiation Protection Program C

KNPR 1860.2 KSC Nonionizing Radiation Protection Program C

KNPR 2570.1 KSC Radio Frequency Spectrum Management Procedural Requirements R

KNPR 6000.1 Transportation Support System Manual C

KNPR 8040.1 KSC, Configuration Management Procedural Requirements C

KNPR 8040.4 International Space Station/Spacecraft Processing Configuration Management Procedural Requirements

KNPR 8500.1 KSC Environmental Requirements C

KNPR 8700.2 KSC System Safety and Reliability Analysis Methodology Procedural Requirements

T

KNPR 8715.2 Comprehensive Emergency Management Plan (CEMP) C

KNPR 8715.3 -1_COMET KSC Safety Procedural Requirements for the Consolidated Operations Management Engineering and Test (COMET) Contract

KNPR 8715.7 KSC Construction Contractor Safety and Health Practices Procedural Requirements

KNPR 8719.9 Examination and Licensing of KSC Operators of Special and Heavy Equipment, Cranes, and Hoists

KNPR 8730.1 KSC Metrology and Calibration Procedural Requirements C

KNPR 8830.1 Facility Asset Management Procedural Requirements C

KPL-PLN-50001 Kennedy Space Center ISS Exploration Research and Technology Programs Certification of Flight Readiness (CoFR) Implementation Plan

KPL-PLN-50007 KSC Payload Facility Contamination Control Requirements/Plan C

KPL-PLN-50008 Payload Facility Contamination Control Implementation Plan C

KPL-UG-50001 Requirements/Guide for Spacecraft Processing at KSC R

KSC-DE-512-SM Ground Systems Development Standard T

KSC-GP-435_Vol_1 Engineering Drawing Practices, Volume I T

KSC-GP-435_Vol_2 Engineering Drawing Practices, Volume II T

KSC-NE-10074 Electrical Ground Support Equipment (EGSE) Qualification Test Plan T

KSC-PLN-2322-EDL Electrical Development Laboratory Management Plan R

KSC-PLN-2807 Mishap Preparedness and Contingency Plan T

KSC-PLN-2807-Notification Safety and Mission Assurance Mishap Notification C

KSC-PLN-5400 Technical Authority Implementation Plan R

KSC-PLN-5403_SysEngMgmt Kennedy Space Center Engineering Directorate Systems Engineering Management Plan

KSC-PLN-5434 Sustaining Engineering Plan R

KSC-PLN-8730.5 NASA John F. KSC QPRD for the Test and Operations Support Contract and NASA Led Tasks at KSC in support of the ISS Program

KSC-STD-164 Standard for Environmental Test Methods for Ground Support Equipment R

KSC-STD-E-0022 Bonding, Grounding, Shielding, Electromagnetic Interference, Lightning and Transient Protection, Design Requirements for Ground Systems

KSC-STD-G-0003 Qualification of Launch Support and Facility Components T

KSC-STD-Z-0015 Standard for Engineering Analysis T

KTI-2712 KSC Engineering Directorate (NE) Document and Part Number Assignment KSC Technical Instruction

KTI-2718 Engineering Directorate (NE) KSC DDMS Electronic Notification, Peer Review, Approval, Release and Revision KSC Technical Instruction

KTI-5031 Engineering Directorate Design and Development Technical Instructions R

LSP-PLN-353.01 LSP Risk Management Plan R

NAII 2190.1 NASA Export Control Program Operation Manual R

NAII 1600.4 Foreign National Access Management R

NASA Fleet Management Handbook

NASA Fleet Management Handbook C

NASA/SP-2010-3403 NASA Schedule Management Handbook R

NASA-HDBK-1004 NASA Digital Engineering Acquisition Framework Handbook R

NASA-STD-2602 Minimum Information System Owner and End User Security for Data At Rest

NASA-STD-2804 Minimum Operability Software Suite R

NASA-STD-5008 Protective Coating of Carbon Steel, Stainless Steel, and Aluminum on Launch Structures, Facilities, and Ground Support Equipment

NASA-STD-7009 Standard for Models and Simulations R

NASA-STD-8719.11 Safety Standard for Fire Protection C

NASA-STD-8719.12 Safety Standard for Explosives, Propellants, and Pyrotechnics C

NASA-STD-8719.17 NASA Requirements for Ground-Based Pressure Vessels and Pressurized Systems (PV/S)

NASA-STD-8719.9 Standard for Lifting Devices and Equipment C

NASA-STD-8729.1 NASA Reliability And Maintainability (R&M) Standard For Spaceflight And Support Systems

NASA-STD-8739.8 NASA Software Assurance and Software Safety Standard C

NASA-STD-8739.6 Implementation Requirements for NASA Workmanship Standards T

NDAA Section 889 Prohibition On Certain Telecommunications and Video Surveillance Services or Equipment

NID 1600.55 Sensitive But Unclassified (SBU) Controlled Information C

NID 2540.138 Acceptable Use of Government Office Property Including Information Technology.

NID 2810.135 Controlled Unclassified Information C

NID 6200-118 NASA Transportation and General Traffic Management R

NID 8800.114 National Historic Preservation Act Leases R

NID 8800.115 Real Estate Management Program to Add Decommission of Facilities R

NID 8800.119 Policy for Removing Items from the Agency Disposal List and Incentivizing the Disposal of Real Property

NID 8800.120 Process for Maintaining Abandoned Facilities R

NID 9250.137 Property, Plant, and Equipment and Operating Materials and Supplies C

NIST SP 800-53 Security and Privacy Controls for Information Systems and Organizations R

NIST SP 800-64 Security Considerations in the System Development Life Cycle R

NPD 1040.4 NASA Continuity of Operations R

NPD 1382.1 NASA Privacy Requirements C

NPD 1382.17 NASA Privacy Policy C

NPD 1440.6 NASA Records Management C

NPD 1600.2 NASA Security Policy R

NPD 2190.1 NASA Export Control Program R

NPD 2540.1 Acceptable Use of Government Office Property Including Information Technology

NPD 2800.1 Managing Information Technology C

NPD 4100.1 Supply Support and Material Management Policy R

NPD 7120.6 Knowledge Policy for Programs and Projects R

NPD 7500.1 Program and Project Logistics Policy R

NPD 8710.1 Emergency Management Program C

NPD 8820.2 Design and Construction of Facilities C

NPD 8910.1 Care and Use of Animals C

NPR 1040.1 NASA Continuity of Operations (COOP) Planning Procedural Requirements R

NPR 1382.1 NASA Privacy Procedural Requirements C

NPR 1441.1 NASA Records Management Program Requirements C

NPR 1600.1 NASA Security Program Procedural Requirements R

NPR 1600.4 Identity and Credential Management R

NPR 1600.6 Communications Security (COMSEC) C

NPR 1620.2 Facility Security Level Determinations R

NPR 1620.3 Physical Security Requirements for NASA Facilities and Property C

NPR 1660.1 NASA Security Program Procedural Requirements R

NPR 2190.1 NASA Export Control Program C

NPR 2810.1 Security of Information Technology C

NPR 2810.2 Possession and Use of NASA Information and Information Systems Outside of the United States and United States Territories

NPR 2830.1 NASA Enterprise Architecture Procedures R

NPR 2841.1 Identity, Credential, and Access Management C

NPR 5200.1 Industrial Labor Relations R

NPR 6000.1 Requirements for Packaging, Handling, and Transportation for Aeronautical and Space Systems, Equipment, and Associated Components

NPR 6200.1 NASA Transportation and General Traffic Management R

NPR 7120.5 NASA Space Flight Program and Project Management Requirements R

NPR 7123.1 NASA Systems Engineering Processes and Requirements T

NPR 7150.2 NASA Software Engineering Requirements C

NPR 8000.4 Agency Risk Management Procedural Requirements C

NPR 8530.1 NASA Sustainable Acquisition C

NPR 8621.1 NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping

NPR 8621.1 Appendix H NASA Procedural Requirements for Mishap and Close Call Reporting, Investigating, and Recordkeeping, Appendix H - Data Entry Elements and Recording Requirements

NPR 8705.2 Human-Rating Requirements for Space Systems C

NPR 8705.6 Safety and Mission Assurance (SMA) Audits, Reviews, and Assessments R

NPR 8715.1 NASA Safety and Health Programs T

NPR 8715.2 NASA Emergency Management Program Procedural Requirements C

NPR 8715.3 NASA General Safety Program Requirements R

NPR 8715.7 Payload Safety Program T

NPR 8735.1 Exchange of Problem Data Using NASA Advisories and the Government- Industry Data Exchange Program (GIDEP)

NPR 8800.15 Real Estate Management Program R

NPR 8820.2 Facility Project Requirements (FPR) C

NPR 8831.2 Facilities Maintenance and Operations Management R

NPR 8910.1 Care and Use of Animals C

NPR 9250.1C Property, Plant, and Equipment and Operating Materials and Supplies C

NPR 9501.2 NASA Contractor Financial Management Reporting C

NRRS 1441.1 NASA Record Retention Schedules C

OLAW U.S. Department of Health and Human Services (DHHS) National Institutes of Health (NIH) PHS Office of Laboratory Animal Welfare (OLAW)

APHIS 41-35-076 U.S. Department of Agriculture (USDA) Animal and Plant Health Inspection Service (APHIS); Animal Welfare Act and Animal Welfare Regulations

PDM 2013-127-EUS Alternate Data At Rest (DAR) Encryption Products C

PHS Policy Public Health Service (PHS) Policy on Humane Care and Use of Laboratory Animals (PHS Policy)

S0300-BT-PRO-010 Government-Industry Data Exchange Program (GIDEP) Operations Manual C

SAE AS 9100 Quality Management Systems – Requirements for Aviation, Space and Defense Organizations

SAE EIA 649-2 Configuration Management Requirements for NASA Enterprises C

SSP 30223 Problem Reporting and Corrective Action for the Space Station Program C

SSP 30234 Failure Modes and Effects Analysis and Critical Items List Requirements (for Space Station)

SSP 30237 Space Station Electromagnetic Emission and Susceptibility Requirements C

SSP 30238 Space Station Electromagnetic Techniques C

SSP 30243 Space Station Requirements for Electromagnetic Compatibility C

SSP 30309 Safety Analysis and Risk Assessment Requirements Document (for ISS Program)

SSP 30599 Safety Review Process (for ISS processing) C

SSP 30695 Acceptance Data Package Requirements Specification (for ISS Program) C

SSP 41170 Configuration Management Requirements (for ISS Program) C

SSP 41173 Space Station Quality Assurance Requirements C

SSP 50004 Ground Support Equipment Design Requirements (for ISS Program) C

SSP 50108 ISS Program Certification of Flight Readiness Process Document C

SSP 50110 Multi-Increment Manifest (MIM) Document C

SSP 50175 ISS Risk Management Plan R

SSP 50200-01 ANXB Station Program Implementation Plan, Volume 1: Station Program Management Plan Annex B: Vehicle Office Plan

SSP 50200-10 Station Program Implementation Plan, Volume 10, Sustaining Engineering C

SSP 50234-001 Sustaining Engineering Implementation Plan (for ISS Program) C

SSP 50450 Multi-increment Payload Resupply and Outfitting Model C

SSP 50520 International Space Station Logistics and Maintenance Operational Support Concepts and Requirements

SSP 50745 ISS Sustaining Engineering Interface Procedures C

SSP 50902 Transportation Integration Office/Commercial Vehicle Certification of Flight Readiness Implementation Plan (ISSP)

SSP 52054 ISS Program Payloads Certification of Flight Readiness Implementation Plan C

SSP-50502 International Space Station Hardware Preflight Imagery Requirements C

SSP 52000-PAH- KSC International Space Station Payload Accommodation Handbook R

COMET RFP No. 80KSC022R0004 APPENDIX 03

APPENDIX 03

COMET MANIFEST

COMET RFP No. 80KSC022R0004 APPENDIX 03

COMET RFP No. 80KSC022R0004 APPENDIX 05

Appendix 05

Government Furnished Facilities

COMET RFP No. 80KSC022R0004 Appendix 06

APPENDIX 06

SUPPORT SHOPS AND

LABORATORIES

COMET RFP No. 80KSC022R0004 APPENDIX 06

Shop/Lab Facility Number Function

NASA Spacecraft Services Depot (NSSD) M7-0505

This facility provides depot-level repair and maintenance capability supporting ISS processing activities and flight hardware. Provides modification, fabrication, repair, and chemical laboratories and engineering services.

Launch Equipment Shop (LES) K6-1247

The Launch Equipment Shop is a 41,000 square foot facility that includes a number of technical shops which have the capability to provide a wide range of technical skills and equipment for the fabrication, modification, refurbishment, maintenance and repair of systems and ground support equipment (GSE). This is done through the use of machinists, welders, electrical cable technicians and sheet metal fabricators.

LES-Pneumatic Shop K6-1346 The LES capability is augmented by a pneumatics service that provides fabrication and bending of high pressure pneumatic lines and hoses

Proofload Shop K6-1995 Proofload Shop provides wire rope fabrication, inspection, maintenance and repairs and in-shop proofloading and load testing of lifting and handling hardware.

Crawler Transporter Operations Shop K6-0793 K6-0743 K6-0746

These facilities will be utilized by TOSC for crawler maintenance.

Heavy Equipment Operations Shop K6-1996H

These facilities will be utilized by TOSC for heavy equipment operations.

The equipment includes mobile cranes, forklifts, pallet jacks, several specialized types of trucks, trailers and specialized vehicles. It also includes, lift and work platforms, excavation, earthwork and demolition equipment, marine and aircraft servicing equipment, tools and miscellaneous assets such as air compressors, light banks, fuel tanks and mobile pumps.

High Crew Operations Shop K6-2045 This shop provides temporary access including scaffolding, floats, and PIC boards, and means for fall protection for working at heights.

Precision Measurement/Alignment Lab K6-0848 Rm 1M12

This facility contains the equipment to provide KSC's in-house mobile measurement and alignment group that performs independent verification of quality, alignment, fit and finish and dimensional analyses of anomalies. The group uses off-the-shelf optical instrumentation to perform 3-dimensional measurements, modeling, reverse engineering and quality assurance on spacecraft, spacecraft components, avionics packages, payloads, GSE and NASA facilities to metrology standards.

Some example work include Solid Rocket Booster hold-down bolt precision alignment during installation, inertial measurement unit installations and calibrations, precision measurement of large scale spacecraft component mating surfaces, measurement of scratches on sealing surfaces.

VAB Electrical and Controls Shop K6-0848 Rms 2M, 2N

VAB shops services/tests/repairs the processing equipment as required (i.e., batteries and electrical GSE)

VAB Hazardous Gas Leak Detection Shop K6-0848 Rms 1M1, 1M4 VAB shops services/tests/repairs the processing equipment as required

Instrumentation Shop K6-0848 Rm 1N VAB shops services/tests/repairs the processing equipment as required

SSPF Science Annex M7-0411

The SSPF Science Annex is a unique facility that supports animal research conducted at KSC including laboratory and analytical support;

bio-specimen housing and care; veterinarian services; surgery and x-ray;

tissue culturing; data collection and analyses

SSPF Plant Growth Chambers

M7-0360 Rm 1062

Rm 1052C Rm 1228

The SSPF Environmental chambers are used by the Plant Growth Research Scientists supporting ISS research

Support Shops & Laboratories

Shops&Labs Page 2 of 4

Engineering Development Lab M7-0409

The Engineering Development Laboratory (EDL) is located in the Engineering Development Lab Building and provides a wide spectrum of capabilities (listed below). Ref KSC-PLN-2322_EDL, Electrical Development Management Pan.

Electrical Hardware Support Capability (EHSC)

M7-0409 Rm 1137

Part of the Engineering Development Laboratory (EDL). The EHSC "machine shop" is a small but well-equipped fabrication facility that supports a variety of labs and projects including the FAT Capability, Cable Shop, and LETF overflow work along with many other research and development projects that require quick turn-around. Also, the EHSC supports all the engineering functions for part prototyping and/or modification.

Fabrication, Assembly, and Test (FAT) Capability

Rm 1112 Rm 1130

Part of the Engineering Development Laboratory (EDL). The FAT Capability is the primary fabrication, assembly, and test site for racks and cabinets of electrical and electronic equipment for use as Ground Support Equipment (GSE) for all ML and Pad based subsystems. This includes the population of the racks and cabinets with all components and fabrication of interconnect wiring harnesses/cables.

Controls Development Capability

(CDC)

Rm 1120 Rm 1122 Rm 1022

Part of the Engineering Development Laboratory (EDL). The CDC supports the development and testing of programmable logic controller (PLC)-based instrumentation for process monitoring and control of ground support equipment (GSE) and facilities.

Sensors and Transducers Development Capability (TDC)

Rm 1108 Rm 1133

Part of the Engineering Development Laboratory (EDL). The TDC provides engineering support for KSC transducers and signal conditioners including design, qualification, specification, testing, and troubleshooting; as well as electromagnetic interference/compatibility (EMI/EMC) evaluation. This includes development and maintenance of transducer specifications to ensure accuracy, reliability and interchangeability of sensors used in GSE systems at KSC.

Electromagnetic Interference (EMI) Capability

Rm 1144

Part of the Engineering Development Laboratory (EDL). The EMI capability provides design recommendations, component/system test and modifications for MIL-STD-461 EMI compliance.

Electronics Development & Test Capability (EDTC)

Rm 1103

Part of the Engineering Development Laboratory (EDL). The EDTC performs circuit board manufacturing; test and rework activities; board and assembly-level development; and prototyping and evaluation for electronic and electrical designs or equipment.

Advanced Electronics and Technology Development Capability

(AETDC)

Rm 1053 Rm 1055 Rm 1116

Part of the Engineering Development Laboratory (EDL). The AETDC performs circuit board design, manufacturing, test and rework activities, as well as board- and assembly-level development, prototyping, and evaluation for electronic and electrical designs or equipment.

Sensor Data Acquisition Subsystem (SDAS) Capability

Rm 1153

Part of the Engineering Development Laboratory (EDL). The SDAS is a distributed, stand-alone data acquisition subsystem that supports stacking, rollout, and launch operations. It monitors and records temperature, pressure, flow rate, acoustic, strain, environmental and special measurements. The SDAS is specifically designed to support high-speed engineering data gathering as well as local and remote display and data storage. The SDAS capability performs evaluations of data acquisition equipment and cables in various configurations to support this subsystem.

Hazard and Gas Detection Capability (HGDC)

Rm 1048 Rm 1056

Part of the Engineering Development Laboratory (EDL). The HGDC capability performs the evaluation, characterization, and qualification of instrumentation assemblies, subassemblies, and components related to the Hazardous Gas Leak Detection Subsystem (HGLDS). It also fabricates instrumentation including prototypes, test support equipment, facility equipment, and ground support equipment for HGLDS.

Shops&Labs Page 3 of 4

Weather (WX) Capability M7-0409 Rm 1134

Part of the Engineering Development Laboratory (EDL). The WX capability performs various activities dedicated to the development and sustaining of weather instrumentation hardware and software. These activities are performed in support of systems deployed at KSC, at lightning research facilities, and at outside-customers’ facilities.

Power Systems Development Capability (PSDC)

Rm 1123

Part of the Engineering Development Laboratory (EDL). The PSDC supports the design and development of new GSE power systems, including equipment rack/subsystem power, alternating current/direct current (AC/DC) power systems, vehicle special power, and battery based systems.

Shops&Labs Page 4 of 4

COMET RFP No. 80KSC022R0004 Appendix 08

APPENDIX 08

ACTIVE DEVELOPMENT PROJECTS

COMET RFP No. 80KSC022R0004 APPENDIX 08

PM

Project Management - support includes managing contractor resources, providing support to NASA PM

SE Systems Engineer - provides subsystem level systems engineering support Engr Engineering - provides technical expertise for affected subsystems CM Construction Management

O&M Operations and Maintenance - provides insight to design, construction, V&V based on O&M perspective and expertise

Y Yes, responsible for this role -- No responsibility in this area S Provide support only. Main responsibility is covered by others.

SME Subject matter expertise is provided

Effectivity Project is based on requirements driven by this mission. The timing of turnover to operations is closely tied to the manifest.

O Operations M Maintenance E Sustaining Engineering Responsibility U User

Project Information

This area defines current NASA managed development projects. It provides a high level scope of the project and the current phase of the project. Support and activities will vary dependent on the current phase (design, construction, V&V). The list of projects is subject to change based on manifest and new vehicle or ground systems requirements. Sustaining projects are not represented in this file, but are provided for reference elsewhere in the Bidders Library (Current Task List).

Responsibility Levels

This area defines the current (FY21) and forecasted OMEU responsibility for the new or modified systems that are part of current NASA managed projects. Forecasts are tied to the current manifest and associated effectivity and are subject to change. The current OMEU responsibilities are covered in Appendix 7.

This area defines the current areas of support by the contractor on NASA managed projects. Support is typically at the subsystem level and is dependent on the scope of the project.

COMET Functional Roles/Support

COMET OMEU Responsibility

1/20/2022

ITEM

# Element/Fac Project Current Phase Scope PWS Secn PM SE Engr CM O&M Effectivity O M E U

1 ML-2 Mobile Launcher 2 (ML2) Design/Build

Design/build of a new Mobile Launcher (ML2) to provide the launch platform and physical interfaces from the KSC launch site ground systems to the SLS Block 1B. The ML2 includes approximately 50 facility and Ground Support Equipment (GSE) subsystems. 3.1.2 (NASA Managed) S Y S -- Y Artemis IV FY24 FY24 FY24 NASA

2 ML-1 ML-1 Modifications for Artemis II Construction/Fab

Modifications to ML-1 to accommodate the Emergency Egress System along with numerous modifications to existing ML-1 subsystems (LRS, HGLDS, HITS, SDAS, CAA, LH2 Bleed Sensor, RSCS, and IOP/SS) required to meet Artemis II requirements. 3.1.2 (NASA Managed) S Y S -- Y Artemis II FY21 FY21 FY22 NASA

3 ML-1 Emergency Egress System - Conveyance Fabrication

Emergency escape conveyance system that is installed on the ML while at the Pad. System includes baskets, cables, cable pullers, braking system. 3.1.2 (NASA Managed) S Y S -- Y Artemis II FY23 FY23 FY23 NASA

4 Pad B Emergency Egress Landing Zone Construction

The terminus and landing zone at Pad B including the cable support structure.

Also includes lightning protection system modifications. 3.1.2 (NASA Managed) -- Y S -- Y Artemis II FY22 FY22 FY22 NASA

5 Pad B LH2 Upgrade Construction

Construction of 1.4M gal Liquid Hydrogen sphere, flare stack, electrical equipment building, and all supporting electrical GSE, communications, facility systems 3.1.2 (NASA Managed) S Y S -- Y Artemis II FY22 FY22 FY23 NASA

6 Pad B Environmental Control System Upgrades Construction

Provides for the modification of the Pad ECS to accommodate both ML-1 or ML- 2 and their associated vehicle blocks in a crew or cargo configuration. Includes reconfiguring downstream ducting, replacing upstream manifold and ducting, replacing cooling tower, and modifying GN2 supply. 3.1.2 (NASA Managed) S Y S -- Y Artemis II FY21 FY21 FY23 NASA

7 Pad B Converter Compressor Facility Upgrades Construction

Provides for installation of upgrades to the CCF including new LGHe supplies and facility revitalization. Also demolishes existing CCF systems. 3.1.2 (NASA Managed) -- Y -- -- -- Artemis II -- -- -- NASA

8 Pad B Liquid Nitrogen Cold Gaseous Helium System Design

Provides for the installation of a new LN2 system required to provide EUS RL10 chill down including all facility and GSE modifications. Also provides the design and fabrication of the GFE LN2 Heat Exchanger. 3.1.2 (NASA Managed) -- Y Y -- Y Artemis IV FY24 FY24 FY24 NASA

9 VAB High Bay 3 B1B Platforms Fabrication

Modify the VAB HB-3 platforms and the transfer aisle to support Space Launch System Block 1B processing.

Modifications include the installation of two new SLS Platform Levels and vertical relocation and/or modification of four existing SLS Platforms levels, for stacking and processing of the Block 1B SLS Crew Vehicle and modification of the VAB Transfer Aisle floor to support the SRM SLAP Stand. 3.1.2 (NASA Managed) -- Y -- -- Y Artemis IV FY25 FY25 FY25 NASA

COMET Functional Roles/Support COMET OMEU Responsibility

Active Development Projects

Project Information

ITEM

# Element/Fac Project Current Phase Scope PWS Secn PM SE Engr CM O&M Effectivity O M E U

COMET Functional Roles/Support COMET OMEU ResponsibilityProject Information

10 VAB High Bay 4 EUS Upgrades Design Modifications to HB4 to allow processing of EUS on B1B vehicle 3.1.2 (NASA Managed) -- Y -- -- Y Artemis IV FY25 FY25 FY25 NASA

11 VAB Environmental Control System Construction

Install Environmental Control System (ECS) in VAB F tower. This system will provide 10 circuits of purge air to the flight vehicle and will include 2 spare circuits. Major components include (3) 250 Ton chillers, (3) 450 hp blowers, 2 air chambers, 3 cooling tower cells, medium voltage feeder, outdoor substation, and a new control room in F tower. 3.1.2 (NASA Managed) -- Y S -- Y Artemis II FY22 FY22 FY22 NASA

12 VAB 325T Crane Upgrade Design Upgrade the 325 Ton crane in the VAB 3.1.2 (NASA Managed) S Y SME Y Y Artemis II FY23 FY23 FY23 NASA

13 RPSF 200T Crane Upgrade Design Upgrade the 200 Ton crane in the RPSF 3.1.2 (NASA Managed) S Y SME Y Y Artemis IV FY24 FY24 FY24 NASA

14 RPSF RPSF Fire Protection System Replacement Construction

Removal and replacement of the fire suppression system within the main processing facility and the OPF Fire Pump House. 3.1.2 (NASA Managed) -- -- -- -- -- Artemis II -- -- -- NASA

15 L&R Landing and Recovery Artemis II Projects Fabrication

Subsystem projects Crew Egress Stand, Side Hatch MGSE, Open Water hardware 3.1.2 (NASA Managed) S Y Y Y Y Artemis II FY22 FY22 FY22 NASA

16 SOPE Crew Transportation Vehicle Fab/Build Completion of a new transportation vehicle for flight crew 3.1.2 (NASA Managed) -- -- -- -- Y Artemis II FY22 FY22 FY22 NASA

17 SOPE MPPU-RPU Replacement Design

Replace the MMPUs with a new Rollout Purge unit to provide a supply of conditioned air for maintaining required temperature, pressure, and humidity levels to fulfill the purge requirements.

3.1.1 (Contractor Managed) Y Y Y Y Y Artemis IV FY24 FY24 FY24 NASA

COMET RFP No. 80KSC022R0004 APPENDIX 09

APPENDIX 09

GLOSSARY AND ACRONYMNS

BENCHSTOCK Low-cost, repetitively used consumption type supplies, and repair parts, established at or near points of consumption/use to ensure continuous and uninterrupted operations.

BI-DIRECTIONAL DIGITAL

DATA SHARING

The transfer of information in electronic form between systems without the need for conversion.

BIOLOGICAL HAZARD,

BIO-HAZARD

Biological substances that pose a threat to the health of living organisms, primarily that of humans. This can include medical waste or samples of a microorganism, virus or toxin (from a biological source) that can impact human health. The term and its associated symbol used as a warning so those potentially exposed to the substance will know to take precautions.

BIO-SAFETY LEVEL The United States' Centers for Disease Control and Prevention (CDC) categorizes various diseases in levels of biohazard, Level 1 being minimum risk and Level 4 being extreme risk. Laboratories and other facilities are categorized as BSL (Bio-safety Level) 1-4.

CAPITALIZED PROPERTY

(Government)

Individual items of Property, Plant, and Equipment (PP&E) that have an acquisition cost of $5,000 or more, or have an estimated useful life of two years or more, and are not intended for sale in the ordinary course of operations, and are acquired or constructed with the intention of being used or available for use.

CARGO Cargo includes Portable Equipment, Payloads and Cargo (PEPC), ISS hardware or Utilization experiments

CENTER Kennedy Space Center

CERTIFICATION The formal written act whereby a responsible official attest to the satisfactory accomplishment of specified activities and authorizes the affected hardware/software, procedures, facilities, and/or personnel for specified usage.

CLOSE CALL A mishap resulting in no personal injury or illness, personal injury or illness requiring only first aid, and/or minor damage (of less than $1,000) but with potential for causing a more serious mishap or negative mission impact. Reference NPR 8621.1

CLOSED-LOOP PROCESS A method of tracking requirements, from development through implementation and verification, to ensure satisfaction and reporting of the entire set of requirements for any given operation.

CLOSEOUT The process of inspecting and securing hardware, usually flight hardware, to ensure no foreign material, damage or out-of-configuration condition exists prior to covering an area in preparation for testing or flight.

COGNZANT SAFETY

ORGANIZATION

The SMA organization responsible for providing safety oversight (e.g.

contractual, program/project…) for NASA-managed activities.

COMMAND MONITORING

AND DATA SYSTEM

A system used to monitor and control the set points of laboratory equipment at the SSPF and SLSL.

COMPATIBILITY

(Electromagnetic)

The ability of two or more electronic systems to operate in their intended environment without their performance being adversely affected by electromagnetic fields.

COMPLIANCE The act or process of satisfying requirements.

COMPONENT A part, device, structure, or combination, usually self-contained, that performs a distinctive function in the operations of the overall equipment; e.g., cryogenic pump, filter assembly, power supply, or transmitter.

COMPOSITE OVERWRAPPED

PRESSURE VESSEL

A vessel consisting of a thin, non-structural liner wrapped with a structural fiber composite, designed to hold fluid under pressure.

COMMERCIAL-OFF-THE-

SHELF

Software or Hardware that is commercially available.

CONFIGURATION CONTROL The process for documenting a baseline and any subsequent changes.

CONFIGURATION

MANAGEMENT

A process that establishes and maintains consistency of a product's performance, functional, physical attributes with its requirements, design, and operational product configuration information throughout the product's life cycle.

CONFIGURATION

MANAGEMENT DATA

SYSTEM

A computer data system for maintaining the design configuration and change tracking for ground support facilities, systems, and equipment end-items.

“CONSISTENT WITH” The contractor has flexibility to develop and apply an approach, but the approach must meet the intent of the reference document.

CONSTRAINT Any technical or operational limiting factor that would prohibit performance of an activity, invalidate a portion of a work authorization document (sequence or step), or could cause personal injury or equipment damage if not resolved satisfactorily before the start of the work sequence or step.

CONSTRUCTION OF

FACILITIES

NASA's capital investment program for facility projects with estimated cost of greater than $1,000,000 per project. CoF projects are approved by NASA Headquarters and require Congressional approval.

CONTINGENCY A potential off-nominal operational condition that require actions (e.g., preplanned troubleshooting, hardware safing, launch scrub or recycle, or crew evacuation). Also, a mishap, mission failure, incident, or high-visibility close call that causes or may cause a major impact to spaceflight operations or prevents accomplishment of a primary mission objective.

CONTRACTOR-LED Any operation or activity where the Contractor performs as 'task leader' or ‘lead designer’ and a significant portion of the work, including design or procedure development, is performed by Contract personnel. The contractor is responsible for integrating, coordinating, and directing team members in the accomplishment of a task.

CONTROLLED UNCLASSIFIED

INFORMATION

Sensitive information that requires protection under laws, regulations and Government-wide policies (LRGWP). Further defined in NID 2810.135

CONVENTIONAL ANALYSES Engineering analyses that are less specialized than unconventional analyses, including, but not limited to, sneak circuit analyses, electrical load analyses, arc flash analyses, American Institute of Steel Construction (AISC) structural code analyses, finite element analyses, single-phase fluid system analyses, vibration response analyses, logistics analyses, reliability analyses, and thermal analyses.

CRITICAL The categorization based on the worst-case potential effect of failure (loss of function or inadvertent operation), that could result in loss of life, loss of vehicle, or damage to a vehicle system.

CRITICAL ITEM Any article or material which if defective can cause loss of life, loss of vehicle, or result in a hazardous or unsafe condition or make a system non-functional.

CRITICAL ITEMS LIST A listing comprised of critical items identified as a result of performing the Failure Modes and Effects Analysis.

CRITICAL SKILLS A specific ability that is required for the safe execution or performance of a unique task, requiring specialized training and certification.

CROSS-PROGRAM Involving more than one Program, e.g. Exploration Ground Systems, Space Launch System and Orion.

DAMAGE ASSESSMENT and

RECOVERY TEAM

A team of personnel to replace the Ride-Out Team and continue the recovery effort after a man-made or natural disaster. The team performs tasks necessary to restore the infrastructure, perform damage assessment, sustain the recovery effort, and safe hazardous situations.

DATA DELIVERY IN-PLACE An IT-specific term referring to the capability to provide access to data in the contractor's native system(s). It does not refer to data specifically identified as a contract deliverable in the PWS, including those items identified in Appendix 1.

DECOMPOSE (Requirements) The process of determining lower level requirements based on given higher-level requirements, constraints, and consideration of other issues.

DEMILITARIZATION/ DEMIL The act of eliminating the functional capabilities and inherent military design features from Government personal property. Methods and degree range from removal and destruction of critical features to total destruction by cutting, crushing, shredding, melting, burning, etc.

DEMIL is required to prevent property from being used for its originally intended purpose and to prevent the release of inherent design information that could be used against the United States. DEMIL applies to material in both serviceable and unserviceable condition.

DEPOT-LEVEL

MAINTENANCE

Includes the repair, fabrication, manufacture, rebuilding, assembly overhaul, modification, refurbishment, rebuilding, test, analysis, repair-process design, in-service engineering, upgrade, painting and disposal of parts, assemblies, subassemblies, software, components, or end items that require shop facilities, tooling, support equipment, and/or personnel of higher technical skills, or processes beyond the organizational level capability.

DESTOW To remove PEPC/FCE, Utilization experiments or ISS hardware from spacecraft.

DEVELOPMENT OR

SUSTAINING PROJECT

A subsystem or system level engineering design project. Projects could be initiated based on new or modified requirements; for operability, obsolescence, or service life issues; to resolve issues with safety, support problem resolution or improve performance;

incorporate vendor product updates or notes. A development or sustaining project can be contractor-led or involve providing support to a NASA-managed contract.

DISPOSAL The process of eliminating a project’s assets.

DOCUMENT CENTER A location to provide onsite access for drawings and technical documentation in electronic and hard copy formats.

DOCUMENT RELEASE

AUTHORIZATION

A process to release engineering documentation into a central repository.

DOCUMENTED The condition of being recorded in written or electronic form.

DOCUMENTATION Information and its supporting medium; e.g., records, specifications, drawings, reports, standards and work documents. The medium may be paper, photography, digital files, optical discs, magnetic, electronic storage or a combination.

e533 FLAT FILE A format specific machine-readable electronic file of NASA Form 533 reportable data (See DRDs 1-2.1 and 1-2.2).

ELECTRONIC INFORMATION Any data and information, except for limited-rights data or restricted software that is processed, managed, accessed or stored on an IT system in the performance of the contract.

ENGINEERING SERVICES Discipline-based services provided as necessary to execute a development or sustaining project, including but not limited to, project management, systems engineering and integration, design engineering, analysis, field supervision and inspection.

ENGINEERING STUDIES Investigations performed and associated reports to determine design decisions and/or support project planning. Examples include, but are not limited to, feasibility and trade studies, field investigations, environmental studies, existing-conditions studies, analysis of future requirements, conceptual project design studies and energy conservation studies.

EQUIPMENT A tangible asset that is functionally complete for its intended purpose, durable, nonexpendable. Equipment is not intended for sale and does not ordinarily lose its identity or become a component part of another article when put into use.

EXCESS A classification assigned to government property for which there is no requirement for future use. Also, a process for property disposal.

EXPENDABLES Property that may be consumed in use or loses its identity in use and may be dropped from stock record accounts when it is issued or used.

EXPERIMENT/SCIENCE

PAYLOAD

A collection of equipment (hardware, software, specimens, etc.) and associated processes that are used to achieve specific scientific, technological, or commercial objectives. The scientific research and development components being flown on a mission, within or on a payload.

EXPRESS LOGISTICS CARRIER An external platform attached to the ISS which is utilized to warehouse ISS spares and external payloads. The external payloads mounted on the ELC are active.

FACILITY-BASED SYSTEMS Built-in equipment and large substantially affixed equipment normally acquired and installed as part of a facility project. Typically includes equipment or systems required to make a facility useful and operable.

The removal of such equipment would impair the usefulness, safety, or environment of the facility and would involve substantial cost because of the special or unique services required for the initial installation.

Examples of COMET facility-based systems include VAB 325-ton bridge crane, launch pad main flame deflector and VAB and SSPF high-bay powered doors.

FAILURE ANALYSIS The effort of physical inspections, test (destructive or nondestructive), and/or analytical processes required to determine the failure modes and causes.

FAILURE MODES AND

EFFECTS ANALYSIS

The analysis of the potential failure modes in a system to determine effects on system operation, personnel safety, and flight hardware; and to classify each failure mode according to severity.

FLIGHT CREW EQUIPMENT This includes an assortment of Government…