B08_Attachment_0006_SF24_Bid_Bond_44038573.pdf

PDF 74 KB Posted

Attached to
Provide Replacement of Heating, Ventilation, & Air
Solicitation number
140P5126R0002
Issued by

About this file

This is Standard Form 24 (Rev. 10/2023), a federal bid bond template prescribed by the General Services Administration under FAR 48 CFR 53.228(a) for use when a bid guaranty is required on federal contract opportunities. The form is authorized for construction, supplies, or services procurements and remains valid through January 31, 2027 (OMB Control Number 9000-0001).

The bid bond serves as a guarantee that the principal (bidder) will execute required contractual documents and provide necessary performance bonds within specified timeframes upon bid acceptance. The bond obligation becomes void if the principal executes further contractual documents and provides required bonds within ten days of receiving forms (or a longer specified period), or if the principal pays the Government for any costs exceeding the original bid amount in the event of non-performance. The penal sum of the bond may be expressed as a fixed dollar amount or as a percentage of the bid price with a maximum dollar cap. The form accommodates individual sureties, corporate sureties, and co-surety arrangements, with corporate sureties required to appear on the Department of Treasury's list of approved sureties. When individual sureties are used, a completed Affidavit of Individual Surety (Standard Form 28) must accompany the bond. The form includes signature blocks for principals, individual sureties, and multiple corporate sureties, requires proper sealing (adhesive seals in Maine, New Hampshire, or other jurisdictions requiring them), and estimates one hour for completion. Extensions of bid acceptance periods up to 60 calendar days do not impair surety obligations with waived notice requirements.

View the file

Other files

File Type Posted
Sol_140P5126R0002_Amd_0006.pdf PDF
B09_Attachment_0015_New_Site_Visit_Information_140P5126R0002_Amend_0005_0005.pdf PDF
Sol_140P5126R0002_Amd_0005.pdf PDF
Sol_140P5126R0002_Amd_0004.pdf PDF
B09_Attachment_0014__New_Site_Visit_Information_140P5126R0002_FOSU_LISQ_HVAC_0004.pdf PDF
Sol_140P5126R0002_Amd_0003.pdf PDF
B08_Attachment_0013_Questions_and_Answers_140P5126R0002__0002.pdf PDF
Sol_140P5126R0002_Amd_0002.pdf PDF
B08_Attachment_0011__Updated_Site_Visit_Information_140P5126R0002_FOSU_LISQ_HVAC_0001.pdf PDF
Sol_140P5126R0002_Amd_0001.pdf PDF
B08_Attachment_0012_Updated_Section_M_140P5126R0008_0001.pdf PDF
B08_Attachment_0010_Submittal_List_-_OM_CO_140P5126R0002_FOSU_HVAC.xlsx XLSX spreadsheet
A06_Div_Specification__2-49_44038573.pdf PDF
B08_Attachment_0008__Site_Visit_Information_140P5126R0002_FOSU_LISQ_HVAC.pdf PDF
B08_Attachment_0009_PPQ_140P5126R0002_FOSU_LISQ_HVAC.pdf PDF
B08__Attachment_0005_Price_Schedule_44038573_FOSU_HVAC.xlsx XLSX spreadsheet
A06_Drawings_44038573.pdf PDF
A06_Division_1_Construction_Specifications_44038573.pdf PDF
Sol_140P5126R0002.pdf PDF
B03_Attachment_0004_WDOL_Wage_Determination_140P5126R0002_FOSU_HVAC.pdf PDF
B08_Attachment_0007_-_LimitOnSubcontractingWorksheet_140P5126R0002.xlsx XLSX spreadsheet
Show all 21

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Bid Bond (See Instructions on Page 3)

Date Bond Executed (Must Not Be Later Than Bid Opening Date)

OMB Control Number: 9000-0001 Expiration Date: 1/31/2027

Principal (Legal Name And Business Address) Type Of Organization ("X" One)

State Of Incorporation

Surety(ies) (Name And Business Address)

Percent Of Bid Price

Penal Sum Of Bond Amount Not To Exceed Million(s) Thousand(s) Hundred(s) Cents

Bid Identification Bid Date Invitation Number

Authorized For Local Reproduction Previous Edition Is Not Usable

STANDARD FORM 24 (REV. 10/2023)

Prescribed by GSA - FAR (48 CFR) 53.228(a)

For (Construction, Supplies Or Services)

Obligation:

We, the Principal and Surety(ies) are firmly bound to the United States of America (hereinafter called the Government) in the above penal sum. For payment of the penal sum, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally. However, where the Sureties are corporations acting as co-sureties, we, the Sureties, bind ourselves in such sum "jointly and severally" as well as "severally" only for the purpose of allowing a joint action or actions against any or all of us. For all other purposes, each Surety binds itself, jointly and severally with the Principal, for the payment of the sum shown opposite the name of the Surety. If no limit of liability is indicated, the limit of liability is the full amount of the penal sum.

Conditions:

The Principal has submitted the bid identified above.

Therefore:

The above obligation is void if the Principal - (a) upon acceptance by the Government of the bid identified above, within the period specified therein for acceptance (sixty (60) days if no period is specified), executes the further contractual documents and gives the bond(s) required by the terms of the bid as accepted within the time specified (ten (10) days if no period is specified) after receipt of the forms by the Principal; or (b) in the event of failure to execute such further contractual documents and give such bonds, pays the Government for any cost of procuring the work which exceeds the amount of the bid.

Each Surety executing this instrument agrees that its obligation is not impaired by any extension(s) of the time for acceptance of the bid that the Principal may grant to the Government. Notice to the Surety(ies) of extension(s) is waived. However, waiver of the notice applies only to extensions aggregating not more than sixty (60) calendar days in addition to the period originally allowed for acceptance of the bid.

Other (Specify)

Individual Partnership Joint Venture

Corporation

2.

(Seal)2.(Seal) 1.

1.

1.

1. 3.2.

Name(s) (Typed)

Signature(s)

Individual Surety(ies)

Name(s) And Title(s) (Typed)

Corporate Seal

(Seal)

3.

(Seal)

2.

(Seal) Signature(s)

Principal

2.

State Of Incorporation Liability Limit ($)

2.

2.

1.Name(s) And Title(s) (Typed)

Signature(s)1. 2. Corporate Seal

Corporate Seal

Name And Address

Signature(s)

Name(s) And Title(s) (Typed)

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

Name(s) And Title(s) (Typed)

Signature(s)

Name And Address

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

Liability Limit ($)State Of Incorporation

1.

1.

Name And Address

Name(s) And Title(s) (Typed)

Signature(s)

Name And Address

Corporate Surety(ies)

Witness:

The Principal and Surety(ies) executed this bid bond and affixed their seals on the above date.

STANDARD FORM 24 (REV. 10/2023) PAGE 2

STANDARD FORM 24 (REV. 10/2023) PAGE 3

Corporate Seal

Name And Address

Signature(s)

Name(s) And Title(s) (Typed)

1.

1.

State Of Incorporation

2.

2.

Liability Limit ($)

Corporate Seal

Name(s) And Title(s) (Typed)

Signature(s)

Name And Address

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

State Of Incorporation Liability Limit ($)

2.

2.

1.

1.

Name And Address

Signature(s)

Name(s) And Title(s) (Typed)

Instructions

1. This form is authorized for use when a bid guaranty is required. Any deviation from this form will require the written approval of the Administrator of General Services.

2. Insert the full legal name and business address of the Principal in the space designated "Principal" on the face of the form. An authorized person shall sign the bond. Any person signing in a representative capacity (e.g., an attorney-in-fact) must furnish evidence of authority if that representative is not a member of the firm, partnership, or joint venture, or an officer of the corporation involved.

3. The bond may express penal sum as a percentage of the bid price. In these cases, the bond may state a maximum dollar limitation (e.g., 20% of the bid price but the amount not to exceed dollars).

4. (a) Corporations executing the bond as sureties must appear on the Department of the Treasury's list of approved sureties and must act within the limitations listed therein. The value put into the Liability

Limit block is the penal sum (i.e., the face value) of the bond, unless a co-surety arrangement is proposed.

(b) When multiple corporate sureties are involved, their names and addresses shall appear in the spaces (Surety A, Surety B, etc.) headed "Corporate Surety(ies)." In the space designated

"Surety(ies)" on the face of the form, insert only the letter identifier corresponding to each of the sureties. Moreover, when co-surety arrangements exist, the parties may allocate their respective limitations of liability under the bond, provided that the sum total of their liability equals 100% of the bond penal sum.

(c) When individual sureties are involved, a completed Affidavit of Individual Surety (Standard Form 28) for each individual surety, shall accompany the bond. The Government may require the surety to furnish additional substantiating information concerning its financial capability.

5. Corporations executing the bond shall affix their corporate seals. Individuals shall execute the bond opposite the word "Corporate Seal"; and shall affix an adhesive seal if executed in Maine, New

Hampshire, or any other jurisdiction requiring adhesive seals.

6. Type the name and title of each person signing this bond in the space provided.

7. In its application to negotiated contracts, the terms "bid" and "bidder" shall include "proposal" and

"offeror."

STANDARD FORM 24 (REV. 10/2023) PAGE 4

Paperwork Reduction Act Statement - This information collection meets the requirements of 44 USC §

3507, as amended by section 2 of the Paperwork Reduction Act of 1995. You do not need to answer these questions unless we display a valid Office of Management and Budget (OMB) control number. The OMB control number for this collection is 9000-0001. We estimate that it will take 1 hour to read the instructions, gather the facts, and answer the questions. Send only comments relating to our time estimate, including suggestions for reducing this burden, or any other aspects of this collection of information to: General

Services Administration, Regulatory Secretariat Division (MVCB), 1800 F Street, NW, Washington, DC

20405.

File details come from the government source that posted it. Updated .