Attachment Q Front Load 4x4 Graphic Dispenser New Concept.docx
DOCX document 32 KB Posted
- Solicitation number
- BD-15-1062-LOT-00001-00000002489
- Issued by
- Norfolk County, Boston City, Massachusetts
About this file
This document is an attachment related to a state and local contract opportunity from the Massachusetts State Lottery Commission (MSLC) to purchase acrylic dispensers and displays for use at MSLC retail sales agent locations. The MSLC is requesting the delivery of acrylic dispensers that must be produced to be base counter mounted in the horizontal feed position, with a mounting plate base system secured by metal screws. The dispensers must have a completely removable or bottom hinged front panel with a lock/release system, a 4.125" wide dispenser slot, and spaces for ticket numbers and denominations. The side, top, and bottom panels must be constructed to allow multiple units to connect, and a base unit must be available for secure installation onto a shelf or countertop.
The MSLC contract opportunity requires cost, construction, quality, material, appearance, and timeline for delivery to be of paramount importance in maximizing net revenues. No other specific pricing terms, set asides, incumbents, funding requirements, or other salient information is provided in this attachment.
View the file
Other files
Show all 28
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Slot Release Lock REAR SECTION VIEW
4x4 Graphic
$5 Dispenser Feed Slot
$5
PG 1
Specifications
Dispensers must be produced so they can be base counter mounted in the horizontal feed position. The dispenser unit must have a mounting plate base system to snap or slide into that is secured by metal screws to the counter or shelf. Screws must be included in each individual pack.
All tickets will be loaded through the front section and stored flat within the dispenser. Tickets must not be folded in any way.
Overall External Measurements:
11.0” inches long
5.0” inches wide
6.0” inches tall
Front Panel - See sketch above
Front panel must be completely removable or bottom hinged with a lock/release system designed into the front panel of sufficient strength for both instant ticket security and pull through ticket dispensing.
The dispenser slot must be 4.125” wide constructed in a manner that provides both up pressure to hold the ticket securely in the slot and a reinforced top section to aid in cutting the perforated fold when dispensing the ticket. The dispenser slot must perform in a manner that allows easy and accurate dispensing of tickets without defacing the ticket or allowing tickets to retract back into the dispenser.
The front panel must contain the following:
1 Lock or face plate securing mechanism 2 Clear and unobstructed 4”x4” graphic card window with slots/clips to hold graphics card built in 3 Space for ticket number on left front lower 4 Space for dispenser feed slot 4.125” wide in center 5 Space for ticket denomination on right lower
PG 2
Side Panels:
Side panels must be constructed in a manner that allows multiple units to connect to each other forming a solid unit. The connection configuration must be included in the construction and size parameters of each individual dispenser.
Side panels should include on both the front and the back section a channel molded into the upper and lower section of the panel allowing for a colored acrylic strip – 1” deep x 6” tall (strictly ascetics) to be slide in between dispensers connected together or used independently.
Top and Bottom Panel
Both top and bottom panels of the dispenser must have the ability to connect to each other forming a solid unit. The connection configuration must be included in the construction and size parameters of each individual dispenser.
Base Unit
Utilizing the same manufactured solution that allows the dispensers the ability to connect to each other both top and bottom and side to side, A base unit must be available (to be ordered separately) allowing the base unit to be installed securely with metal screws onto a shelf top or countertop with the dispensing unit system inserted and locked into place in the base
Rear Panel – See sketch above
The rear panel must contain the following:
1 Clear and unobstructed 4”x4” graphic card window with slots/clips to hold graphics card built in 2 Space for ticket number on left front lower 3 Space for ticket denomination on right lower.
PG 3
image1.emf image2.emf
File details come from the government source that posted it. Updated .