ATTACHMENT J-12 Dehumidification.docx
DOCX document 666 KB Posted
- Attached to
- Operation and Maintenance of Philadelphia Inactive Vessels and CG/LSD Modernization Detachment Norfolk
- Solicitation number
- N00024-21-R-4203
About this file
This document contains inspection guidelines for dehumidification systems on naval vessels. It includes four NSTM 50 inspection guidelines covering measurements of relative humidity levels, filter changes, and discrepancies. Guideline DH1 addresses machine operation times and functionality. DH2 covers zone humidity readings and balance. DH3 specifies annual filter changes for interior machines. DH4 requires annual filter changes for exterior machines. Each guideline includes yes/no checklist items and spaces to record inspection data, discrepancies, and corrective actions. Potential discrepancies are to be documented on the discrepancy listing form provided.
View the file
Other files
Show 40 more
Latest 50 of 52 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Periodicity:
Spec Code:
Berthed At:
Quarter:
NSTM 50 INSPECTION GUIDELINES
DH1
Insp Date:
TDL
Remarks N/A
NO
YES
Description Item Record elapsed time meter readings and date. Are machines operating less than 50% of the time?
Is machine operable ? (Start idle machine manually to ensure operability.)
Have all other discrepancies been reported? If not report them here.
D/H Elapsed Time FWD Draft:
AFT Draft:
List:
Comments:
Inspector Inspector Inspection Manager Elapsed Time Data Table Machine Date E.T.I.
Date Hours Run Elapsed Time Operation
Attachment 11 NSTM 50 INSPECTION GUIDELINES - Descrepancy Listing Spec Code:
Line Item # Location Discrepancy Discovery Dt Correction Dt
Berthed At:
Quarter:
NSTM 50 INSPECTION GUIDELINES
DH2
Insp Date:
TDL
Remarks N/A
NO
YES
Description Item Are average zone readings 40% RH (+ or - 5%)?
Are individual relative humidity (RH) readings 45% or less?
Are air zones in balance? (High or low zone readings within plus or minus 5% RH of the zone average.)
Are permanent zone closures and blanks properly sealed, painted and stenciled?
Access closures operate and seal properly?
Are all exterior hatches, vent openings and huts properly sealed?
Are individual humidistats locations properly identified and labled?
Have all other discrepancies been reported? If not report them here.
D/H Inspection
FWD Draft:
AFT Draft:
List:
Comments:
Inspector Inspector Inspection Manager Elapsed Time Data Table Zone H1 H2 H3 H4 H5 Avg.
Zone H1 H2 H3 H4 H5 Avg.
Topside Hut R.H. and Test Specimen Data Table Zone H1 H2 H3 H4 H5 Avg.
Zone H1 H2 H3 H4 H5 Avg.
Line Item # Location Discrepancy
Berthed At:
Quarter:
NSTM 50 INSPECTION GUIDELINES
DH3
Insp Date:
TDL
Remarks N/A
NO
YES
Description Item Are filters on DH machines located on the interior of the vessel being changed Annually?
Have all other discrepancies been reported? If not report them here.
D/H Filters (Inspection) FWD Draft:
AFT Draft:
List:
Comments:
Inspector Inspector Inspection Manager
Line Item # Location Discrepancy
Berthed At:
Quarter:
NSTM 50 INSPECTION GUIDELINES
DH4
Insp Date:
TDL
Remarks N/A
NO
YES
Description Item Are filters on DH machines located on the weather decks of the vessel being changed Annually?
Have all other discrepancies been reported? If not report them here.
D/H Filters (Topside) FWD Draft:
AFT Draft:
List:
Comments:
Inspector Inspector Inspection Manager
Line Item # Location Discrepancy
File details come from the government source that posted it. Updated .