Attachment A - PWS.pdf

Ver. October 2022

PERFORMANCE WORK STATEMENT (PWS)

FOR

Automated External Defibrillator Services and Cardiopulmonary Resuscitation (CPR) Classes

1.0 General:

1.1 Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary, except as specified in Paragraph 3.0 as Government Furnished, to perform of conducting inspections on Automated External Defibrillator (AED) and teach Cardiopulmonary Resuscitation classes as defined in this

PWS.

1.1.1 Objectives: To conduct calibration, replacement of pads and batteries, and repair services for 13 AED inspections at multiple sites in Michigan along with conducting 14 CPR classes at eight locations.

1.2 Background: The public access defibrillators are placed in military facilities to provide emergency first aid to Michigan Army National Guard (MIARNG) employees, M-day Soldiers, and civilians. Only individuals specifically and formally certified by the American Heart Association (AHA) in AED procedures may be a designated AED Representative. Anyone is permitted to use a public access AED in the event of an emergency.

1.3 Period of Performance (PoP): The Period of Performance shall be a twelve-month base year plus four twelve-month option periods.

1.4 General Information:

1.4.1 Place and Performance of Services: The contractor shall provide services between the hours of 0745-1630 on Monday through Friday, except on recognized US holidays or when the Government facility/installation is closed due to local or national emergencies, administrative closings, or similar Government-directed facility/installation closings. Performance shall be at Grand Ledge, MI, Selfridge Air National Guard Base, Grayling, MI, Lansing, MI, Detroit, MI, Fort Custer Training Center, Augusta, MI, Wyoming, MI, Montague, MI, Ishpeming, MI, Kingsford, MI, Sault St. Marie, MI, Ypsilanti, MI, and Midland, MI, The contractor shall at all times maintain an adequate work force for the uninterrupted performance of all tasks defined within this PWS when the Government facility/installation is not closed for the above reasons. When hiring personnel, the contractor shall keep in mind that the stability and continuity of the workforce are essential. Teleworking is authorized.

W91JB2QA066 ATTACHMENT A

Total Pages: 16

Building Street Address

AASF #1 10700 Eaton Highway, Grand Ledge, MI 48837 -1st Floor

AASF #2 BLDG 1416 Selfridge ANG Base, Selfridge, MI 48045

MATES 2450 N Down River Rd, Grayling, MI 49738

CSMS 3323 MLK, Lansing MI 48906

FCTC UTES 2501 26th St, Fort Custer, Augusta, MI 49012-BLDG 2295

FMS 2 BLDG 1492, Selfridge ANG Base, Selfridge, MI 48045

FMS 4 1200 44th Street SW, Wyoming, MI 49509

FMS 4A 8061 Cook St, Montague, MI 49437

FMS 16 Ishpeming 900 Palms Ave, Ishpeming, MI 49849

FMS 16 Kingsford 401 S. Carpenter, Kingsford, MI 49802

FMS 16 SS Marie 1170 E. Portage Ave, SS Marie, MI 49783

FMS 17 7400 S. Huron River Dr, Ypsilanti, MI 48197

FMS 22 2300 Airport Rd, Midland, MI 48642

1.4.1.1 Telework:

The Government will permit the contractor to telework in support of this requirement. In furtherance of Continuity of Operations Planning (COOP), a telework program may be enacted to ensure that the Government's mission-critical operations stay operational during times of national emergency or incidents of national significance. Telework shall be at no additional cost to the Government.

1.4.1.2 Unscheduled gate closures by the Security Police may occur at any time causing all personnel entering or exiting a closed installation to experience a delay. This cannot be predicted or prevented. Contractors are not compensated for unexpected closures or delays. Vehicles operated by contractor personnel are subject to search pursuant to applicable regulations. Any moving violation of any applicable motor vehicle regulation may result in the termination of the contractor employee’s installation driving privileges.

1.4.1.3 The contractor’s employees shall become familiar with and obey the regulations of the installation; including fire, traffic, safety and security regulations while on the installation. Contractor employees should only enter restricted areas when required to do so and only upon prior approval. All contractor employees shall always carry proper identification with them and shall be subject to such checks as may be deemed necessary. The contractor shall ensure compliance with all regulations and orders of the installation, which may affect performance. The Government reserves the right to direct the removal of an employee from Government property or revoke access to Government systems for misconduct, security reasons, or any overt evidence of communicable disease. Removal of contractor employees for reasons stated above does not relieve the Contractor from responsibility for total performance of this contract.

1.4.2 Recognized Holidays: The following are recognized United States (US) holidays.

The contractor shall not perform services on these days:

1.4.2.1 New Year’s Day: January 1st

1.4.2.2 Martin Luther King, Jr.’s Birthday

1.4.2.3 President’s Day

1.4.2.4 Memorial Day

1.4.2.5 Juneteenth National Independence Day: June 19th

1.4.2.6 Independence Day: July 4th

1.4.2.7 Labor Day

1.4.2.8 Columbus Day

1.4.2.9 Veteran’s Day: November 11th

1.4.2.10 Thanksgiving Day

1.4.2.11 Christmas Day: December 25th

1.4.3 Quality Control (QC): The contractor shall develop and maintain an effective QC Plan (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s QCP is the means by which it assures itself that its work complies with the requirements of the contract. As a minimum, the contractor shall develop QC procedures that address the areas identified in Technical Exhibit 1, Performance Requirements Summary (PRS). A final QCP shall be submitted to the Contracting Officer Representative (COR) NLT 10 days after contract award.

After acceptance of the QCP, the contractor shall obtain the Contracting Officer’s (KO’s) acceptance in writing of any proposed changes to its QCP.

1.4.4 Quality Assurance (QA): The Government will evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan (QASP). This plan is primarily focused on what the Government will do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and acceptable quality level(s) or defect rate(s).

1.4.5 Installation Access and Security Requirements. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the COR. The contractor and all associated subcontractor employees shall provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services, or Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by Department of Defense (DoD), Headquarters Department of Army (HQDA) and/or local policy (see PWS 6.0). Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

1.4.5.1 For contractors that do not require a CAC, but require access to a DoD facility or installation: Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05), and applicable installation, facility and area commander installation/facility access, and local security policies and procedures (provided by a Government representative).

1.4.5.2 Communications Security/Information Technology (COMSEC/IT) Security. All communications with DoD organizations are subject to COMSEC review. All telephone communications networks are continually subject to intercept by unfriendly intelligence organizations. DoD has authorized the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations. Therefore, the contractor is advised that any time contractor personnel place or receive a call they are subject to COMSEC procedures. The contractor shall ensure wide and frequent dissemination of the above information to all employees dealing with DoD information. The contractor shall abide by all Government regulations concerning the authorized use of the Government's computer network, including the restriction against using the network to recruit Government personnel or advertise job openings.

1.4.5.3 Protection of Personally Identifiable Information (PII). The contractor shall protect all PII encountered in the performance of services in accordance with Defense Federal Acquisition Regulation Supplement (DFARS) 224.103 Personally Identifiable Information and Department of Defense Directive (DoDD) 5400.11, Department of Defense Privacy Program, and DoD 5400.11-R. If a PII breach results from the contractor’s violation of the aforementioned policies, the contractor shall bear all notification costs, call-center support costs, and credit monitoring service costs for all individuals whose PII has been compromised.

1.4.6 Physical Security. The contractor shall safeguard all Government property provided for contractor use. At the close of each work period, Government facilities, equipment and materials shall be secured.

1.4.7 Post Award Conference/Periodic Progress Meetings: The contractor agrees to attend any post award conference convened by the KO in accordance with FAR 42.5.

The KO, COR and other Government personnel, as appropriate, may meet periodically with the contractor to review the contactor’s performance. At these meetings, the KO will apprise the contractor of how the Government views the contractor’s performance and the contractor shall apprise the Government of problems, if any, being experienced.

The contractor shall resolve outstanding issues raised by the Government. Contractor attendance at these meetings shall be at no additional cost to the Government.

1.4.8 Contract Manager (CM): The contactor shall designate a CM who shall ensure performance under this contract. The name of this person, and an alternate who shall act for the contractor when the CM is absent, shall be designated in writing to the KO.

The CM or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The CM shall work through the COR, to resolve issues, receive technical instructions, and ensure adequate performance of services. The CM shall ensure that contractor employees do not perform any services outside the scope of the contract without an official modification issued by the KO. The CM shall ensure contractor employees understand that services performed outside the scope of the contract are performed wholly at the expense of the contractor.

1.4.9 Identification of Contractor Employees: All contractor personnel attending meetings, answering Government telephones and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression that they are Government employees. The contractor shall ensure that all documents or reports produced by contractor personnel are suitably marked as contractor products or that contractor participation is appropriately disclosed. The contractor’s status as a “contractor” shall be predominantly displayed in all correspondence types (to include signature blocks on e-mail) and dealings with Government or non-Government entities. Contractor personnel shall wear identification badges distinguishing themselves as such. The badges shall have the company name, employee name and the word “contractor” displayed.

1.4.10. Combating Trafficking in Persons: The United States Government has adopted a zero tolerance policy regarding trafficking in persons. Contractors and contractor employees shall not engage in severe forms of trafficking in persons during the period of performance of the contract; procure commercial sex acts during the period of performance of the contract; or use forced labor in the performance of the contract. The Contractor shall notify its employees of the United States Government’s zero tolerance policy, the actions that will be taken against employees for violations of this policy. The contractor shall take appropriate action, up to and including termination, against employees or subcontractors that violate the US Government policy as described at

FAR 22.17.

1.4.11 Contractor Travel

The contractor shall travel to Grand Ledge, MI, Selfridge Air National Guard Base, Chesterfield, MI, Camp Grayling Maneuver Training Center, Grayling, MI, Lansing, MI, Detroit, MI, Fort Custer Training Center, Augusta, MI, Wyoming, MI, Montague, MI, Ishpeming, MI, Kingsford, MI, Sault St. Marie, MI, Ypsilanti, MI, and Midland, MI during the performance of this contract to conduct inspections of AEDs.

The contractor shall conduct CPR Training Courses at the following locations: AASF#1 Grand Ledge, MI, Grayling MATES, Grayling, MI, Ishpeming, MI, AASF# 2 Selfridge ANG Base, FMS #4 Montague, MI, CSMS Lansing, MI, FCTC UTES, Augusta, MI.

The cost of travel for the AED inspections and the CPR Training shall be borne by contractor

1.4.12 Data Rights: The Government has unlimited rights to all documents/materials produced under this contract. All documents and materials, to include the source codes of any software, produced under this contract shall be Government owned and are the property of the Government with all rights and privileges of ownership/copyright belonging exclusively to the Government. These documents and materials may not be used or sold by the contractor without written permission from the KO. All materials supplied to the Government shall be the sole property of the Government and may not be used for any other purpose. This right does not abrogate any other Government rights.

1.4.13 Organizational Conflicts of Interest (OCI): The contractor and subcontractor personnel performing services under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent OCIs, as defined in FAR Subpart 9.5. The contractor shall notify the KO immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the KO to avoid or mitigate any such OCI. The contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the KO. In the event the KO unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the KO may impose other remedies as he or she deems necessary, including prohibiting the contractor from participation in subsequent contracted requirements which may be affected by the OCI.

2.0 Definitions and Acronyms:

2.1 Definitions:

2.1.1 Contractor: A supplier or vendor awarded a contract to provide specific supplies or service to the Government. The term used in this contract refers to the prime.

2.1.2 Defective Service: A service output that does not meet the standard of performance associated with the PWS.

2.1.3 Deliverable: Anything that can be physically delivered and includes non-manufactured things such as meeting minutes or reports.

2.1.4 Key Personnel: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a contract by the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.5 Physical Security: Actions that prevent the loss or damage of Government property.

2.1.6 Quality Assurance: The Government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.7 Quality Assurance Surveillance Plan (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.8 Quality Control: All necessary measures taken by the Contractor to ensure that the quality of an end product or service shall meet contract requirements.

2.1.9 Subcontractor: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.2 Acronyms:

AASF Army Aviation Support Facility AED Automated External Defibrillator AEI Army Enterprise Infostructure ANG Air National Guard AR Army Regulation AT/OPSEC Antiterrorism/Operational Security BI Background Investigation

BLS Basic Life Support CGMTC Camp Grayling Maneuver Training Center CM Contract Manager COR Contracting Officer Representative CPR Cardiopulmonary Resuscitation CSMS Combined Surface Maintenance Shop DA Department of the Army DD254 Department of Defense Contract Security Classification Specification DFARS Defense Federal Acquisition Regulation Supplement DoD Department of Defense DSCA Defense Counterintelligence and Security Agency FAR Federal Acquisition Regulation FCTC Fort Custer Training Center FMS Field Maintenance Shop FPCON Force Protection Condition GFP/M/E/S Government Furnished Property/Material/Equipment/Services HQDA Headquarters, Department of the Army HSPD Homeland Security Presidential Directive IA Information Assurance IS Information System(s) JFHQ Joint Forces Headquarters KO Contracting Officer MATES Maneuver Area Training Equipment Site MIARNG Michigan Army National Guard NGB National Guard Bureau OCI Organizational Conflict of Interest

PAD Public Access Defibrillator PII Personally Identifiable Information PIPO Phase In/Phase Out POC Point of Contact PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QASP Quality Assurance Surveillance Plan QC Quality Control QCP Quality Control Program SCR Service Contract Reporting SSN Social Security Number

TE Technical Exhibit USD(I) Under Secretary of Defense for Intelligence

3.0 Government Furnished Property, Material, Equipment and Services (GFP/M/E/S):

The Government will provide the property, material, equipment, and/or services listed below solely for the purpose of performance under this contract:

3.1 Property: The Government will furnish the necessary workspace for the contractor to perform services outlined in this PWS to include desk space, tables, and chairs to set CPR equipment on and for students to sit at during instruction.

3.2 Materials: Reserved

3.3 Equipment: Reserved

3.4 Services: Reserved

3.5 Utilities: All utilities in the facility will be available for the contactor’s use in the performance of this contract. The contractor shall instruct employees in utilities conservation practices. The contractor shall operate under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount.

4.0 Contractor Furnished Property, Materials, and Equipment (CFP/M/E):

4.1 General: Except for those items specifically stated to be Government-Furnished in Paragraph 3.0, the contractor shall furnish everything required to perform these services as indicated in Paragraph 1.1.

4.1.1 The contractor shall provide all necessary equipment and supplies for conducting the CPR training to include: Adult and Child size manikins, sanitation to the manikins between use, visual aids, written materials, DVD, DVD Player, computer and CPR Cards.

4.2 Reserved

4.3 Reserved

5.0 Requirements: The contractor shall:

5.1 Contractor shall inspect and maintain AED’s twice a year. The contractor shall replace any equipment, pads, or battery packs if damaged, expired, or will expire before next inspection visit, or if the pads have been used. The contractor shall report expiration dates on their inspection reports, when they replace pads or batteries.

5.2 The contractor shall respond to service calls for AED equipment needs within 7 days of notification.

5.3 The contractor shall provide accessory supplies with each AED to include: 1 pair latex free gloves size large, disposable razor, pocket mask, bandage scissors, gauze pad size 4 x 4 or larger and operator book.

5.4 The contractor shall provide 14 classes for cardiopulmonary resuscitation (CPR) with 12 seat allocations per class. Classes shall meet American Heart Association standards (AHA). Basic Life Support (BLS) cards shall be issued to qualifying students, certifying them in CPR for a period of two years. Locations of CPR training shall be conducted at the following locations: Grand Ledge, Grayling, Lansing, Ishpeming, Augusta, Selfridge, Wyoming and Ypsilanti Michigan. Class schedule will be determined by the COR and will be located at the sites listed above. In the event a class needs to be cancelled from one of the above locations or a new location has been identified for a class, the COR will contact the KO of the need to do a location substitution.

5.5 The contractor shall provide three AED batteries and three sets of pads to the COR at 3323 N. Martin Luther King Blvd, Lansing, MI 48906 to serve as back up equipment in the event of a malfunction of battery or new AED acquired that needs a replacement.

5.6 The contractor shall provide a class roster via email to the COR from the vendor within 24 business hours after each class identifying qualified BLS/CPR card holders.

5.7 The contractor shall provide the inspection sheets to the COR via email for each AED inspection conducted NLT 10 days after the inspection has been conducted.

5.8 The contractor shall be prepared to support additional inspections of newly installed AEDS that are installed in locations named in this PWS or in new locations within the MIARNG. The COR will notify the contractor of facilities that meet this criteria to schedule these newly installed devices to receive their twice a year inspection. The change mentioned above will be executed through bilateral agreement.

6.0 Applicable Publications: Publications applicable to this PWS are listed below:

Publication (Chapter/Page)

Date of Publication

Mandatory or Advisory

Website

Federal Acquisition Regulation Advisory https://www.acquisition.gov/?q=browsefar

Defense Federal Acquisition Regulation Supplement

Advisory https://www.acquisition.gov/dfars

Joint Travel Regulation (JTR) Advisory https://www.defensetravel.dod.mil/site/travelreg.cfm

DoDM 1000.13-M-V1 DoD Identification (ID) Cards (Enclosure 2, paragraph 3.b)

01/23/2014 (Change 1:

07/28/2020)

Advisory http://www.esd.whs.mil/Directives/issuances/dodm https://www.acquisition.gov/?q=browsefar https://www.acquisition.gov/dfars http://www.defensetravel.dod.mil/site/travelreg.cfm http://www.esd.whs.mil/Directives/issuances/dodm

Federal Information Processing Standards (FIPS) Publication 201-2 Personal Identity Verification (PIV) of Federal Employees and Contractors

(paragraph 9)

August 2013 Advisory http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201 -2.pdf

DoDM 5200.2 Procedures for the DoD Personnel Security Program

(PSP)

04/03/2017 Advisory https://www.esd.whs.mil/Directives/issuances/dodm/

Homeland Security Presidential Directive (HSPD)-12

Policy for a Common Identification Standard for Federal Employees and

Contractors

08/27/2004 Advisory https://www.dhs.gov/homeland-security-presidential-directive-12

DoDI 5400.11 Department of Defense Privacy and

Civil Liberties Programs

01/29/2019 Advisory https://www.esd.whs.mil/Directives/issuances/dodi/

DoD 5400.11-R Department of Defense Privacy

Program

05/14/2007 Advisory https://www.esd.whs.mil/Directives/issuances/dodm/

Part 117 of Title 32 National Industrial Security Program

Operating Manual (NISPOM) 12/21/2020

Advisory https://www.ecfr.gov/current/title-32/subtitle- A/chapter-I/subchapter-D/part-117

Army Directive 2014-05 Policy and Implementation

Procedures for Common Access Card Credentialing and Installation

Access for Uncleared Contractors

03/07/2014 Advisory https://armypubs.army.mil/ProductMaps/PubForm/A rmyDir.aspx

Occupational Safety and Health Administration

OSHA

Publication

Mandatory https://www.osha.gov/aed/workplace

6.1 Applicable Forms: Forms applicable to the PWS are listed below:

Form Date Website

DD 250

Material Inspection and Receiving

Report

Aug 2000 https://www.esd.whs.mil/Directives/forms/dd0001_0499/ http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf https://www.esd.whs.mil/Directives/issuances/dodm/ https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.dhs.gov/homeland-security-presidential-directive-12 https://www.esd.whs.mil/Directives/issuances/dodi/ http://www.esd.whs.mil/Directives/issuances/dodm/ https://armypubs.army.mil/ProductMaps/PubForm/A https://www.osha.gov/aed/workplace https://www.esd.whs.mil/Directives/forms/dd0001_0499/

TECHNICAL EXHIBIT 1

Performance Requirements Summary (PRS)

This PRS includes performance objectives the Government will use to determine contractor performance and will compare contractor performance to the Acceptable Quality Level (AQL).

Performance Objective

Performance Standard Acceptable Quality Levels (AQL)

Surveillance Method / By Whom

5.1 Inspect and

maintain AED’s twice a year.

Replace any equipment, pads or battery packs if damaged, expired, or will expire before next inspection visit, or if the pads have been used.

Inspect and maintain AED’s twice a year.

Replace any equipment, pads or battery packs if damaged, expired, or will expire before next inspection visit, or if the pads have been used.

Email communication will be required of inspection status.

5% of the second inspection not completed during the PoP

Random Inspection/COR

5.2 Respond to

service calls for AED equipment needs within 7 days of notification

The contractor shall respond to service calls within 7 days of notification for AED equipment

All service calls will be responded to within 7 days of notification 90% of the time.

Random/COR

5.3 Provide

accessory supplies with each AED to include1 pair latex free gloves size large, disposable razor, pocket mask, bandage scissors, gauze pad size 4 x 4 or larger and operator book

The contractor will provide accessory supplies with each AED.

All items will be supplied 95% of the time.

Random/COR

5.4 Provide 14 classes for

cardiopulmonary resuscitation

(CPR) Classes shall meet

American Heart Association standards

(AHA).

Provide 14 CPR classes at locations named in

PWS & Technical Exhibit 2.

All classes will be conducted during the PoP 90% of the time.

Random/COR

5.6 A class roster

will be provided via email to the

Supervisor& COR from the vendor within 24 hours after each class identifying qualified

BLS/CPR card holders.

Provide class rosters within 24 business hours after the class identifying qualified

BLS/CPR cardholders

Class rosters turned in no later than 24 business hours after the class on time during the PoP. All rosters will be turned in to the COR after every course. Must have at least 90% compliance.

Random/COR

TECHNICAL EXHIBIT 2

Deliverables Schedule

PWS Reference / Deliverable Title

Frequency Number of Copies

Medium/Format Submit To

5.5 The

contractor shall provide three (3)

AED batteries and three (3) set of pads to the

COR.

Once during PoP No copies, just requested number of batteries and sets of pads

Send through postal mail and provide tracking number of package(s)

COR

5.6 A class roster

will be provided via email to

COR from the vendor within 24 business hours after each class identifying qualified

BLS/CPR card holders.

Provide class rosters within 24 business hours after the class identifying qualified

BLS/CPR cardholders

1 copy per class site

Send class roster via email in a

PDF

document

COR

5.7 The

contractor shall provide the inspection sheets to the COR or the

Facility Supervisor.

After each inspection conducted

1 copy per inspection site

Send Inspection Sheet via email in a

PDF

document labeled with facility name, date of inspection.

COR

TECHNICAL EXHIBIT 2

Deliverables Schedule

Locations to provide service of AED

AASF #1 10700 Eaton Highway, Grand Ledge, MI 48837 -1st Floor

AASF #2 BLDG 1416 Selfridge ANG Base, Selfridge, MI 48045

MATES 2450 N Down River Rd, Grayling, MI 49738

CSMS 3323 MLK, Lansing MI 48906

FCTC UTES 2501 26th St, Fort Custer, Augusta, MI 49012-BLDG 2295

FMS 2 BLDG 1492, Selfridge ANG Base, Selfridge, MI 48045

FMS 4 1200 44th Street SW, Wyoming, MI 49509

FMS 4A 8061 Cook St, Montague, MI 49437

FMS 16 Ishpeming 900 Palms Ave, Ishpeming, MI 49849

FMS 16 Kingsford 401 S. Carpenter, Kingsford, MI 49802

FMS 16 SS Marie 1170 E. Portage Ave, SS Marie, MI 49783

FMS 17 7400 S. Huron River Dr, Ypsilanti, MI 48197

FMS 22 2300 Airport Rd, Midland, MI 48642

Locations to provide CPR/AED Training Building Street Address Number of Classes to

Conduct

AASF #1 10700 Eaton Highway, Grand Ledge, MI 48837 -1st Floor

AASF #2 BLDG 1416 Selfridge ANG Base, Selfridge, MI 48045 2

CSMS 3323 MLK, Lansing MI 48906 2

FCTC UTES 2501 26th St, Fort Custer, Augusta, MI 49012-BLDG

FMS 4 1200 44th St SW Wyoming MI 49509 1

FMS 16 900 Palms Ave, Ishpeming, MI 49849 2

FMS 17 7400 S Huron River Dr Ypsilanti MI 48197 1

MATES 2450 N Down River Rd, Grayling, MI 49738 2

Location to provide additional quantities for on hand

Surface Maintenance Office 3323 MLK, Lansing MI 48906

TECHNICAL EXHIBIT 3

This information is provided for historical background only. It is not guarantee of workload quantities. The contractor shall provide service in multiple locations throughout Michigan.

Estimated Workload Data

ITEM NAME ANNUAL ESTIMATED QUANTITY

1 CPR AED Classes 14

2 Number of AEDs to inspect 13

3 AED Accessory set to include: 1 pair latex free gloves size large, disposable razor, pocket mask, bandage scissors, gauze pad size 4 x 4 or larger and operator book.

4 AED Pads Estimated 13 replace when expired, plus additional 3 on hand per 5.5 of the PWS

5 AED Batteries Estimated 13 replace when expired, plus additional 3 on hand per 5.5 of the PWS.