Attachment_1Savage_Gulf_Fuel_Aerial_View.pdf

This is an aerial view photograph attachment for a state and local contract opportunity issued by the Tennessee Department of Environment & Conservation for fuel storage and dispensing equipment installation at Savage Gulf State Park in Beersheba Springs, Tennessee. The image shows an aerial perspective of the project site and is labeled "75' Slide Number 1," indicating it is the first slide in a series of aerial documentation. The photograph provides visual reference for the site layout and dimensions, which is essential given that mandatory site visits are required for all bidders to take exact measurements and assess ground conditions. The aerial view supports the scope of work that includes site preparation with clearing, grubbing, and grading, as well as the installation of concrete foundational support pads for two 1,000-gallon aboveground storage tanks—one for unleaded gasoline and one for off-road diesel, each equipped with attached fuel dispensers and a Fuel Master FMU-2500 Plus Fuel Management System.

Bidders must submit proposals by May 1, 2026, at 2:00 PM CDT through the Tennessee Edison system or Supplier Portal, with written questions and comments due by April 15, 2026, at 2:00 PM CST. All on-site work must be completed between contract receipt and June 25, 2026, with equipment delivery required by March 30, 2026. Contractors must possess an active Tennessee Building Contractor license and be registered with the Tennessee Supplier Portal prior to contract issuance. The contract has a maximum liability cap of $130,000, and contractors must maintain workers' compensation insurance with minimum coverage of $1,000,000, commercial general liability insurance with minimum combined single-limit coverage of $1,000,000 per occurrence and $2,000,000 aggregate, and automobile liability insurance with minimum coverage of $1,000,000 per occurrence. A payment bond equal to 25% of the maximum liability ($32,500) is required, and all invoices must be submitted within ten days of project completion and final acceptance.