Appendix A - Equip Enroll Matrix_SILC Catalog 2024.xlsx

Sheet1 Equipment Enrollment Form

To be filled out by Contractor (white blocks) Completed by Govt

Master Listing (OSC-Project) CC_ID Level I Level I Description Level I Definition Level II System Level II Definition Level III Component Level III Definition Level IV Material/Equipment Category Level IV Definition Component Type Level V Class Definition & Component Type UOM E-M-C PM RS Means/Reference Number RS Means/Reference Description Source Existing SAM Job Plan Numbers Frequency OPFAC Design Life EE Capture? Comment List Order DC Description DE Description DC UOM DC E-M-C DE Job Plan(s) DE Freq DE RSM Desc Attr_Size (Req'd?)

St. Charles, Robin W.: St. Charles, Robin W.:

Yes = Size active for UII classification

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

bottom, compacted backfill, formwork and keyway, reinforcing steel, concrete and screed finish.

Foundation Walls: Include work items associated with CIP foundation walls, grade beams, or CMU walls. Assemblies include excavation, compacted backfill, perimeter insulation, perimeter drainage, formwork, reinforcing steel, concrete or

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

Assemblies include excavation, backfill and compaction, formwork, reinforcing steel, and concrete and screed finish. If structural steel columns set directly on spread footings, anchor bolts are included in this assembly.

Pile Caps: Assemblies include excavation if required (normally due to installation of piles, the subgrade is at desired level for pile cap), hand-shaped bottom, compacted backfill, formwork, reinforcing steel, and concrete and screed finish. If structural steel columns set directly on spread footings, anchor bolts are included in this assembly.

Column Piers: Assemblies include formwork, reinforcing steel, concrete or CMU, finish, break ties and patch, and set anchor

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

principle methods of dewatering are by pump or by a system involving the sinking of a series of well-points around the area and extracting the water by suction pump. Assemblies would include pumps or well points and all associated dewatering

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

H-piles, step-tapered steel piles, and treated wood piles.

Applicable assemblies would include the material for piles, pile

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

casings if required, reinforcing steel, bell bottom excavation,

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

buildings by extending their foundations to a new, lower level containing the desired bearing stratum. Assemblies include

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

principle methods of dewatering are by pump or by a system involving the sinking of a series of well-points around the area and extracting the water by suction pump. Assemblies would include pumps or well points and all associated dewatering

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

heavily reinforced concrete covering the entire building footprint

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

and other special foundations. Assemblies would include all material and labor necessary to perform the work for the special

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103001 STANDARD SLAB ON GRADE Standard slab-on-grade is supported by compacted earth or gravel fill. The soil bearing capacity is sufficient to support the slab. Assemblies include fine grade, gravel fill, underslab insulation, edge forms, termite treatment (interior slabs only), vapor retarder, reinforcing, expansion joints, control joints, and

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103002 STRUCTURAL SLAB ON GRADE A structural slab-on-grade is not supported by compacted earth or gravel fill. The soil bearing capacity is insufficient to support the slab. A structural slab is generally a minimum of eight inches thick and will be reinforced with reinforcing bars rather than welded wire fabric. Assemblies include fine grade, gravel fill, underslab insulation, edge forms, termite treatment, (interior slabs only), vapor retarder, reinforcing, expansion joints, control joints, and finish and curing. Assemblies are based on thickness

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103003 INCLINED SLAB ON GRADE An inclined slab-on-grade is a slab that is poured on an incline.

An example would be an inclined loading dock slab and associated ramps. Assemblies include fine grade, gravel fill, underslab insulation, edge forms, termite treatment (interior slabs only), vapor retarder, reinforcing, expansion joints, control joints, and finish and curing. Assemblies are based on thickness

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103004 TRENCHES Cast-in-place trenches. Assemblies include excavation, hand shaped bottoms, compacted backfill, formwork, reinforcing steel, concrete, and concrete finish. Examples include trench drains

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103005 PITS AND BASES Cast-in-place pits and bases. Assemblies include excavation, hand-shaped bottoms, compacted backfill, formwork, reinforcing steel, concrete, and concrete finish. Examples include elevator

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation drainage. A1030 SLAB ON GRADE A slab poured on earth, whether on undisturbed or fill soil. A103006 FOUNDATION DRAINAGE Foundation drainage directly associated with draining the foundation. This category does not include storm drainage piping for site. It would include drain pipe or drain tile at foundation or basement for specific purposes of draining foundation or basement. Assemblies would include excavation, hand-shaped bottoms, gravel, compacted backfill, and drain pipe, including

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A10 FOUNDATIONS Foundations include the following Standard Foundations: wall and column foundations; foundation walls up to level of top of slab on grade; pile caps; foundation excavation, backfill, and compaction; footings and bases; perimeter insulation; perimeter drainage; anchor plates; and dewatering. Special Foundations include pile foundations, caissons, underpinning, dewatering, raft foundations, and pressure injected grouting. Slab on grade includes standard slab on grade, structural slab on grade, inclined slab on grade, trenches, pits and bases, and foundation

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A20 BASEMENT CONSTRUCTION Work Includes basement excavation, and basement walls. A2010 BASEMENT EXCAVATION Excavation work associated with constructing a basement. A201003 SHORING This type of shoring is to resist horizontal pressure and not intended to carry vertical loads. Assemblies would include sheet piling or other material and labor used to hold back earth around

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A20 BASEMENT CONSTRUCTION Work Includes basement excavation, and basement walls. A2020 BASEMENT WALLS Assembly includes basement perimeter walls that are below grade and below the ground floor level of the building; this also includes elevator pits and other pits. A202001 BASEMENT WALL CONSTRUCTION This includes work items associated with CIP foundation walls or CMU walls and penetrations. Assemblies include formwork,

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A20 BASEMENT CONSTRUCTION Work Includes basement excavation, and basement walls. A2020 BASEMENT WALLS Assembly includes basement perimeter walls that are below grade and below the ground floor level of the building; this also

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A20 BASEMENT CONSTRUCTION Work Includes basement excavation, and basement walls. A2020 BASEMENT WALLS Assembly includes basement perimeter walls that are below grade and below the ground floor level of the building; this also

(including slab-on-grade) and the enclosing horizontal and vertical elements required to form a basement, together with the necessary mass excavation and backfill. A20 BASEMENT CONSTRUCTION Work Includes basement excavation, and basement walls. A2020 BASEMENT WALLS Assembly includes basement perimeter walls that are below grade and below the ground floor level of the building; this also

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101001 STRUCTURAL FRAME The structural frame could consist of structural steel including columns, beams, joists, and all associated items. It could be a concrete frame utilizing concrete or masonry columns and concrete girders and beams. The structural frame could be wood columns with wood beams or wood trusses. The structural frame could be a combination of the above. For example, concrete or masonry columns with structural steel beams and joists. All associated work items should be included in each assembly.

Separate assemblies would be used for different types of construction. The unit of measure at the assembly level is the square footage of the supported area. Decks and slabs are not

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101002 STRUCTURAL INTERIOR WALLS Assemblies would be CIP or CMU walls or other structural interior walls. The assemblies would include the labor and material required to perform the construction tasks associated

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101003 FLOOR DECKS AND SLABS Slabs above grade should be broken into assemblies according to their particular type of construction (that is, flat slab, pan slab, precast or pre-stressed slab, four-way slab, slabs on metal or wood decking with concrete fill, etc.). All associated work items should be included in each assembly, such as expansion and

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101004 BALCONY CONSTRUCTION Balconies above grade should be broken into assemblies according to their particular type of construction. All associated

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101005 RAMPS Ramps above grade should be broken into assemblies according to their type of construction. All associated items including

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101007 INCLINED AND STEPPED FLOORS This assembly should be broken down according to their particular type of construction (that is, flat slab, pan slab, precast or pre-stressed slab, four-way slab, slabs on metal or wood decking with concrete fill, etc.). All associated work items should be included in each assembly, such as expansion and

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1010 FLOOR CONSTRUCTION This construction can be wood, concrete, CMU, steel frame, etc. B101099 OTHER FLOOR CONSTRUCTION Any type of special floor construction not included above would fall in this category, such as catwalks, space frames, etc. All

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1020 ROOF CONSTRUCTION This construction is similar to floor construction except that is applies to the framework supporting the roof and roof decks.

(See also System B30, Roofing.) B102001 STRUCTURAL FRAME The structural frame could consist of structural steel including columns, beams, joists, and all associated items. It could be a concrete frame utilizing concrete or masonry columns and concrete girders and beams. The structural frame could be wood columns with wood beams or wood trusses. The structural frame could be a combination of the above. For example, concrete or masonry columns with structural steel beams and joists. All associated work items should be included in each assembly.

Separate assemblies would be used for different types of construction. The unit of measure at the assembly level is the square footage of the supported area. Decks and slabs are not

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1020 ROOF CONSTRUCTION This construction is similar to floor construction except that is applies to the framework supporting the roof and roof decks.

(See also System B30, Roofing.) B102002 STRUCTURAL INTERIOR WALLS Assemblies would be CIP or CMU walls or other structural interior walls. The assemblies would include the labor and material required to perform the construction tasks associated

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1020 ROOF CONSTRUCTION This construction is similar to floor construction except that is applies to the framework supporting the roof and roof decks.

(See also System B30, Roofing.) B102003 ROOF DECKS AND SLABS Roof decks and slabs should be broken into assemblies according to their particular type of construction (that is, flat slab, pan slab, precast or pre-stressed slab, four-way slab, slabs on metal or wood decking with concrete fill, etc.). All associated

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1020 ROOF CONSTRUCTION This construction is similar to floor construction except that is applies to the framework supporting the roof and roof decks.

(See also System B30, Roofing.) B102004 CANOPIES Canopies should be broken into assemblies according to their particular type of construction (that is, flat slab, pan slab, precast or pre-stressed slab, four-way slab, slabs on metal or wood decking with concrete fill, etc.). All associated work items should

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B10 SUPERSTRUCTURE Work includes floor construction and roof construction. B1020 ROOF CONSTRUCTION This construction is similar to floor construction except that is applies to the framework supporting the roof and roof decks.

(See also System B30, Roofing.) B102099 OTHER ROOF CONSTRUCTION Any type of special roof construction not included above would fall into this category. All associated work items would be

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B20 EXTERIOR ENCLOSURE This system consists of the exterior facing of the facility, which includes all vertical and horizontal exterior closure such as exterior walls, exterior windows, and exterior doors. This system excludes roofing (See System B30, Roof). Load bearing exterior walls will be included here, and not in System B10, Superstructure. Structural frame elements at exterior such as columns, beams, spandrels, etc., would be included in Superstructure with only the applied exterior finishes (that is, paint, stucco, etc.) being included here. Finishes to the inside face of walls which are not an integral part of the wall construction will be included in System C30, Interior Finishes. B2010 EXTERIOR WALLS All materials associated with the following construction: exterior load-bearing walls, insulation and vapor retarder, parapets, exterior louvers and screens, sun control devices (exterior), balcony walls and handrails, exterior soffits, screen walls, and exterior coatings. B201001 EXTERIOR CLOSURE Assemblies would include material contained in exterior closure wall, such as masonry with brick veneer. Materials used for interior finishes on exterior walls are not included in this assembly. For example, if the interior side of this masonry wall is sheetrock applied on metal furring strips, the masonry wall is included in this assembly, but the furring strips and sheetrock

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B20 EXTERIOR ENCLOSURE This system consists of the exterior facing of the facility, which includes all vertical and horizontal exterior closure such as exterior walls, exterior windows, and exterior doors. This system excludes roofing (See System B30, Roof). Load bearing exterior walls will be included here, and not in System B10, Superstructure. Structural frame elements at exterior such as columns, beams, spandrels, etc., would be included in Superstructure with only the applied exterior finishes (that is, paint, stucco, etc.) being included here. Finishes to the inside face of walls which are not an integral part of the wall construction will be included in System C30, Interior Finishes. B2010 EXTERIOR WALLS All materials associated with the following construction: exterior load-bearing walls, insulation and vapor retarder, parapets, exterior louvers and screens, sun control devices (exterior), balcony walls and handrails, exterior soffits, screen walls, and exterior coatings. B201002 EXTERIOR WALL BACKUP CONSTRUCTION Assemblies include the support structure for the exterior skin or provide load bearing walls for the facility, or both. Materials used for interior finishes on exterior walls are not included in this assembly. For example, if the interior side of the masonry wall is sheetrock applied on metal furring strips, the masonry wall is included in this assembly, but the furring strips and sheetrock

supports within basements and above grade. Note that the structural work will include both horizontal items (slabs, decks, etc.) and vertical structural components (columns and interior structural walls). Exterior load bearing walls are not included in this system but in System B2010, Exterior Walls. B20 EXTERIOR ENCLOSURE This system consists of the exterior facing of the facility, which includes all vertical and horizontal exterior closure such as exterior walls, exterior windows, and exterior doors. This system excludes roofing (See System B30, Roof).