Addendum 1 22029.pdf

440 Bridge Street 122 S. Union Street, Suite 200 Grand Rapids, MI 49504 Traverse City, MI 49684 P 616 774 0100 P 231 947 2177 www.cornerstone‐arch.com

Mitchell State Park‐ South Toilet Shower Building Replacement Cadillac, MI

Project No.: 22.102 DTMB File No. 751/22029.JAN

Addendum #1 Issued Date: September 2, 2022

To: Potential Bidders

Cc: Jan Miller, DTMB Project Director

The following changes are made a part of the Drawings and Specifications for the subject project dated August 18, 2022.

All contractors, subcontractors, material suppliers and other involved parties shall be responsible for reading the entire Addendum. Failure to list an item(s) in all affected sections of this Addendum does not relieve any party affected from performing per instructions, provided the information is set forth one time anywhere in the Addendum.

This document shall become attached to and part of the Bidding Documents for the aforementioned project. All requirements contained in the Bidding Documents shall apply to this Request. All incidental work necessary to complete the Work shall be included in the Contractor’s quotation even though not particularly mentioned.

Description:

See attached ADD #1 write‐up and the documents associated.

Sent by:

Anna Kindt

122 S Union Street, Suite 200 Traverse City, MI 49684 440 Bridge Street NW Grand Rapids, MI 49504 P 231 947 2177 F 231 933 4310 P 616 774 0100 F 616 774 2956

Mitchell State Park‐ South Toilet Shower Building Replacement Cadillac, MI

Project No.: 22.102 DTMB File No. 751/22029.JAN

ADDENDUM #0001

9/2/22 Cadillac, Michigan 22.102

This addendum is notification to all bidders on the above-mentioned project that the following revisions to the Construction Documents are to be incorporated into any bid proposals submitted.

Drawings issued with this Addendum:

SK Detail Sheets issued with this Addendum:

1) none.

Clarification and Additional Information from Pre-bid Walk Thru:

1) See attached DTMB agenda.

2) See attached Cornerstone Architects project scope summary.

3) See attached Cornerstone Architects meeting notes.

4) Pre-bid sign in sheet posted as separate addenda.

Specification Revisions:

1) None.

Specifications issued with this Addendum:

1) None

Revisions to Bid Specifications issued with this Addendum:

Substitution Request:

1) Proposed Substitution Mitchell SP 001: Request to substitute Navien Tankless Hot

Water instead of tank-type specified.

Rejected. See attached request.

2) Proposed Substitution Mitchell SP 002: Request to substitute DMI Inter-Lock Standing

Seam Metal Roofing as equal to that specified.

Approved. See attached request.

3) Proposed Substitution Mitchell SP 003: Request to substitute lighting package fixtures.

Approved as Noted. See attached request.

Bid Requests for Information:

Drawing Revisions:

Site: none Architectural: none Structural: none

122 S Union Street, Suite 200 Traverse City, MI 49684 440 Bridge Street NW Grand Rapids, MI 49504 P 231 947 2177 F 231 933 4310 P 616 774 0100 F 616 774 2956

Mechanical: none Electrical: none Plumbing: none

End of ADDENDUM #Mitchell SP 0001

GRETCHEN WHITMER

GOVERNOR

STATE OF MICHIGAN

DEPARTMENT OF TECHNOLOGY, MANAGEMENT & BUDGET

LANSING

BROM STIBITZ

ACTING DIRECTOR

DESIGN & CONSTRUCTION DIVISION

3111 W. ST. JOSEPH STREET ● LANSING, MICHIGAN 48917

www.michigan.gov/dtmb ● 517-284-7910

State Facilities Administration - Design & Construction Division Mandatory Pre-Bid Conference Agenda

Date: Wednesday, August 31, 2022 @ 11:00 AM

Department of Natural Resources, Parks & Recreation Division Mitchell State Park Campground – South Toilet Shower Building Replacement

File No. 751/22029.JAN – Index No. 5126

1. Introductions / Sign-in Sheet

2. Bid Submission - bids must be submitted electronically through the SIGMA website at https://sigma.michigan.gov/webapp/PRDVSS2X1/AltSelfService no later than Wednesday, Sept. 14, 2022 @ 2:00 pm local time. Hard copy bids will not be accepted.

3. Bid to include, refer to Section 00100 – Instructions to Bidders Signed and completed Bid Summary Form Bid Schedule Qualified Disabled Veteran (QDV) Business Representation, if applicable Signed Certification of a Michigan Based Business (projects over $100,000.00) Bid Security in the amount of 5% of Base Bid Price Signature Authorization or copy of the partnership agreement if signed by all partners Post-Bid Submittals will be requested by the professional (projects over

$250,000.00) from the apparent low bidder, within one business day after receipt of the request. Interview(s) will be scheduled for September 16, 2022.

4. Modification of bid – the entire bid must be resubmitted on the SIGMA website.

5. Payment and Performance Bonds will be required upon issuing Notice of Award.

6. Qualified Disabled Veteran Preference is in effect, make sure to check the box on the

Bid Summary Form.

7. Best Value Bidder – bids will be evaluated for best value based on price and qualitative components by comparing the three lowest responsive and responsible bidders.

8. Prevailing Wage Rates

9. Contract Time – 206 calendar days from the Notice-to-Proceed or by May 12, 2023.

10. Liquidated Damages - $2,000.00 per day

11. Alternate 1 – Delete labor & materials to change polished concrete floors to sealed.

Alternate 2 – Delete labor & materials to change sheet metal roofing to asphalt shingle.

12. Allowances - $50,000 Owner’s Provisional Allowance, to be included in base bid

13. Hazardous Materials Report – PCB, asbestos, and paint

14. Materials Testing – By owner

15. Schedule

Questions to akindt@cornerstone-arch.com no later than 5:00 pm, Sept. 7, 2022.

Addenda issued no later than 5:00 pm, Sept. 9, 2022 Bids due Sept. 14, 2022 @ 2:00 pm local time

16. Project Description – Cornerstone Architects

17. Site Tour

P 616 774 0100 P 231 947 2177 www.cornerstone‐arch.com

Mitchell State Park‐ South Toilet Shower Building Replacement Cadillac, MI

Project No.: 22.102 DTMB File No. 751/22029.JAN

Date: August 31, 2022 @ 11am

Meeting Info: Meet at Park Headquarters.

Project Scope:

1. General:

a. Job trailer allowed on site. Contractor to provide their own toilet facilities.

Locations to be worked out with DNR.

b. For winter access, the Park will plow the main road coming into the park. The contractor will be responsible for plowing the loops up to the building and any areas surrounding that are needed for a job trailer, equipment, staging and etc… The contractor will be responsible for restoration of any areas damages by plowing.

c. Campground will be completely closed starting this fall for construction. They are tentatively planning to open the north loops only at the end of April 2023 depending on construction progress (north loops would use the other north TS building).

d. Permitting:

i. Submitted to LARA for construction codes review.

ii. Submitted to EGLE for campground review.

iii. Submitted to District Health Department 10 for review.

iv. DTMB doing SESC review and permitting in‐house (application provided in specs).

e. Please use Substitution Request Form included in specs if you want to request a substitution.

2. Demolition:

a. Hazardous material remediation to be completed By Contractor prior to start of demo. Work to be included in your bid. Reports are in the specifications.

b. The building is on municipal electric, gas and water/sewer. Existing connections will be reworked or replaced per plans. Protect anything to remain during demo.

Coordinate any shutoffs and connections with the utility companies.

c. Salvage and provide to Owner: Birding signage, ’10‐Minute’ parking signs and posts.

Pre‐Bid Meeting:

3. Site Work:

a. Geotech report included in specs. Layer of peat about 5.5‐7’ down that needs to be removed below the building footprint per the report‐ will lead to over‐excavation.

The report has recommendations for a suitable fill to provide bearing.

b. Dewatering will be needed as water level is 3.5’ down. See Geotech report and civil spec for dewatering method options. Peat material may need to drain prior to hauling. The contractor will be able to work with the Park to find a location on site for draining prior to hauling. The contractor would then be responsible for restoration of the preapproved location along with any other areas damaged by dewatering activities.

c. New concrete sidewalks, parking, grading, and utility connections per plans.

d. Building footing drain to be connected to existing site storm water system.

e. Bike racks themselves are By Owner, though contractor to provide concrete pad as shown on plans.

f. New parking paving can be either concrete or asphalt, at the contractors option

(whatever provides the best pricing).

4. Proposed:

a. Based on prototype but with park specific modifications to the floor plan.

i. Masonry cavity exterior wall construction, split face veneer with two bands of smooth face accent and columns.

ii. Interior walls masonry (to 8’ ht) with epoxy paint and wood frame with wood siding above.

iii. Exposed timber columns and trusses at gable porches.

iv. Rafter and truss framed wood roof structure.

v. Standing seam metal roof with alternate for asphalt shingle. See drawing description for what materials to change for alternate, and see specs for materials for each system.

vi. Aluminum frame windows, project‐in vents where shown.

vii. Aluminum doors and frames.

viii. Wood tongue‐and‐groove used on exterior and interior at soffits, ceilings, siding, wall paneling.

ix. Foundations can be either block as shown or poured concrete, at the contractors option (whatever provides the best pricing).

1. Footings to bear on new fill, per Geotech, with footing drain system to deal with high water table.

b. Structural

i. All floor slabs to slope to floor drains.

ii. Note overframing at eastern half of building to achieve gables.

iii. Exposed timber trusses at gables has high and low beams that bear back to masonry and wood framing at building.

c. Plumbing

i. Using rear‐access shower controls so can be maintained from mechanical room.

ii. Note shut off valves at each fixture.

iii. Tank type hot water heaters.

iv. Water runs, furnace ducting and electrical panel locations get tight for overhead clearance. We’ve worked to provide proper locations, but will need to be kept track of and coordinated by the contractor.

d. Mechanical

i. Ducted gas furnace with energy recovery ventilator.

ii. Ducting in mechanical area to be run along sloped ceiling to maintain head height.

iii. Outdoor air and exhaust air louver in architectural spec and detail provided for how to install custom shape louver in gable ends.

e. Electrical

i. Building has generator receptacle and transfer switch, but generator not included in project.

ii. Existing Loon Cabin feeder run through panel at this building. Feeder to be replaced as part of this project.

f. Substitution Requests:

i. A substitution request for tankless has been rejected (info to be included in addenda).

ii. Standing seam metal roofing approved substitution info will be in addenda.

Project Schedule:

5. Bid questions due to Anna by Wednesday, September 7 by 5pm.

6. Jan reviewed bid dates (Wednesday, September 14 at 2pm due on SIGMA).

7. Once bids are received, post‐bid submittals will be requested by Anna, to be received within one day (would like to receive Thursday).

8. Post‐bid interviews will be scheduled the morning of Friday, September 16.

REVIEW ON SITE:

1. Site walk.

P 616 774 0100 P 231 947 2177 www.cornerstone‐arch.com

Mitchell State Park‐ South Toilet Shower Building Replacement Cadillac, MI

Project No.: 22.102 DTMB File No. 751/22029.JAN

Pre‐Bid Meeting Notes Date: Wednesday, August 31, 2022, 1pm Location: Park HQ and existing T/S site In Attendance: Jan Miller, DTMB Project Director Annamarie Bauer, DNR PDR Regional Planner Ben Dietrich, DNR Park Supervisor Kasey Mahoney, DNR Cadillac District Supervisor Anna Kindt, Cornerstone Potential Bidders (see sign in sheet)

Meeting Notes:

1. Jan Miller reviews DTMB agenda (see attached).

2. Anna Kindt reviews project scope summary (see attached).

3. Contractor Q&A:

a. Winter conditions are required.

b. A full time site supervisor is required.

c. Question regarding applicability of ADA laws to project and what review standards the project is required to meet.

i. The project is required to meet ADA and was designed to State applicable standards.

ii. LARA will be reviewing ADA standards under their jurisdiction.

iii. The DTMB does not override applicable ADA guidelines.

a. Plumbing review is at the State level. If there is turnover in that position, we will still need to work with the State as they are the authority having jurisdiction over the project.

b. Question if dewatering can be discharged into the stormwater system.

i. Architect working with Civil engineer to determine requirements. Further information will be issued in a future addenda.

c. Question regarding how frost laws, hauling requirements and existing road condition will impact project and any responsibility the contractor has for the road condition after the project.

i. DNR and DTMB currently reviewing expectations. Further information will be issued in a future addenda. Existing asphalt on road surface believed to be approximately 1” thick.

End of Notes.

Dick Vredevoogd, Specification and Project Manager 8/23/22 Balfrey-Johnston Inc

13050 Northend Ave Oak Park MI 48237 248-384-8781 313864-7219

Plumbing Equipment and Materials Product Equipment

22 00 10 2 I. Plumbing Equipment

Navien NPE-240S2 Condensing Tankless Water Heaters Navien

Navien NPE-240S2 www.navieninc.com

Dick Vredevoogd, Specification and Project Manager

A. Kindt 8/30/22 x x x

T H E L E A D E R I N C O N D E N S I N G T E C H N O L O G Y

QuickFacts eriesNPE-2 Se ater HeatersTankless Wa

Navien Certification Summary Note: all NPE-2 models are field convertible from NG to LP gas

Model

Product Approvals Efficiency Ratings* Annual Energy Consumption*

(Residential)

CSA

NSF

(Standard 5) Low Lead (<0.25%)

SCAQMD 1146.2

(NOx, <20ppm)

AHRI

Number

Energy Star

Uniform Energy Factor

(UEF)

Max GPM (L/m) (67°F Rise)

Natural Gas (Therms/Year)

Propane (Gallons/

Year)

Estimated Operating

Cost**

NPE-180A2-NG Yes Yes Yes Yes 206368357 Yes 0.95 4.3 (16) 179 $195

NPE-180A2-LP Yes Yes Yes Yes 206368357 Yes 0.95 4.3 (16) 196 $472

NPE-210A2-NG Yes Yes Yes Yes 206368358 Yes 0.95 5.1 (19) 179 $195

NPE-210A2-LP Yes Yes Yes Yes 206368358 Yes 0.95 5.1 (19) 196 $472

NPE-240A2-NG Yes Yes Yes Yes 206368359 Yes 0.95 5.6 (21) 179 $195

NPE-240A2-LP Yes Yes Yes Yes 206368359 Yes 0.95 5.6 (21) 196 $472

NPE-150S2-NG Yes Yes Yes Yes 206423843 Yes 0.93 3.4 (13) 120 $131

NPE-150S2-LP Yes Yes Yes Yes 206423843 Yes 0.93 3.4 (13) 131 $316

NPE-180S2-NG Yes Yes Yes Yes 206368360 Yes 0.96 4.4 (17) 177 $193

NPE-180S2-LP Yes Yes Yes Yes 206368360 Yes 0.96 4.4 (17) 194 $468

NPE-210S2-NG Yes Yes Yes Yes 206368361 Yes 0.96 5.3 (20) 177 $193

NPE-210S2-LP Yes Yes Yes Yes 206368361 Yes 0.96 5.3 (20) 194 $468

NPE-240S2-NG Yes Yes Yes Yes 206368362 Yes 0.96 5.8 (22) 177 $193

NPE-240S2-LP Yes Yes Yes Yes 206368362 Yes 0.96 5.8 (22) 194 $468

*Based on U.S. Department of Energy (DOE) test procedures.

**Based on a national average natural gas cost of $1.09/therm, propane cost of $2.41/gallon.

Temperature Rise (maximum output)

Temp Rise (°F)

150S2 GPM (L/m)

180A2/S2 GPM (L/m)

210A2/S2 GPM (L/m)

240A2/S2 GPM (L/m)

35 6.8 (26) 8.4 (32) 10.1 (38) 11.2 (42)

40 5.9 (22) 7.4 (28) 8.8 (33) 9.8 (37)

45 5.3 (20) 6.5 (25) 7.8 (30) 8.7 (33)

50 4.8 (18) 5.9 (22) 7.1 (27) 7.8 (30)

55 4.3 (16) 5.3 (20) 6.4 (24) 7.1 (27)

60 4.0 (15) 4.9 (19) 5.9 (22) 6.5 (25)

65 3.7 (14) 4.5 (17) 5.4 (20) 6.0 (23)

70 3.4 (13) 4.2 (16) 5.0 (19) 5.6 (21)

75 3.2 (12) 3.9 (15) 4.7 (18) 5.2 (20)

80 3.0 (11) 3.7 (14) 4.4 (17) 4.9 (19)

85 2.8 (11) 3.5 (13) 4.2 (16) 4.6 (17)

90 2.6 (10) 3.3 (12) 3.9 (15) 4.4 (17)

100 2.4 (9) 2.9 (11) 3.5 (13) 3.9 (15)

110 2.2 (8) 2.7 (10) 3.2 (12) 3.6 (14)

120 2.0 (8) 2.5 (9) 2.9 (11) 3.3 (12)

130 1.8 (7) 2.3 (9) 2.7 (10) 3.0 (11)

140 1.7 (6) 2.1 (8) 2.5 (9) 2.8 (11)

DHW Capacity

Models Natural Gas (BTU/H) Propane Gas (BTU/H)

NPE-150S2 18,000–120,000 18,000–120,000

NPE-180A2/S2 10,000–150,000 10,000–150,000

NPE-210A2/S2 12,000–180,000 12,000–180,000

NPE-240A2/S2 13,300–199,900 13,300–199,900

Operating Cost

Navien tankless 179 therms $195*

Other tankless 209 therms $228*

Standard tank 269 therms $293*

* Based on Energy Guide cost estimates using $1.09 per therm of natural gas. Cost is in US dollars.

Warranty

Application Labor Parts Heat

Exchanger

Residential

Standard or controlled recirculation2 1 year 5 years 15 years

Uncontrolled recirculation3 1 year 3 years 5 years

Commercial or Combi1

Standard or controlled recirculation2 1 year 5 years 8 years

Uncontrolled recirculation3 1 year 3 years 3 years

1 Combi refers to a combination potable water and space heating application. Water heaters cannot be used in space heating only applications.

2 Controlled-Recirculation: Recirculation through the water heater is controlled by either the water heater or an external aquastat.

3 Uncontrolled-Recirculation: External pumps configured to circulate continuously through the water heater are subject to the uncontrolled recirculation warranty terms. An aquastat is the minimum pump control requirement for DHW or storage tank recirculation in order to maintain the full controlled recirculation warranty.

For complete details please refer to the full warranty at Navieninc.com.

U.S. Green Building Council LEED Points*

Water Heater Location Recirculation

1.5 Points 2 Points 3 Points

Lower HERS Home Index Score*

* Please consult your Energy/LEED consultant.

Product Features

0.9

UP TO

U E F6

NPE-A2 COMFORT FLOW

BUILT-IN BUFFER TANK

& RECIRCULATION PUMP

TDR

GAS

UP TO

24 FEET

VENT

UP TO

75 FEET

22 &

DUAL

HEAT EXCHANGERS

STAINLESS

STEEL

CASCADE 32

UP TO

UNITS

EZNAV INTUITIVE

CONTROL

SYSTEM

Navien Inc., 20 Goodyear, Irvine, CA 92618 800-519-8794 Navieninc.com

T H E L E A D E R I N C O N D E N S I N G T E C H N O L O G Y

NPE2-QF001-2203 ©2022 Navien Inc.

Dimensions

NPE-A2 NPE-S2

Specifications

Item NPE-150S2 NPE-180A2 NPE-180S2 NPE-210A2 NPE-210S2 NPE-240A2 NPE-240S2

Heat capacity (input)

Natural gas 18,000– 120,000

BTU/H

10,000–150,000 BTU/H 12,000–180,000 BTU/H 13,300–199,900 BTU/H

Energy factor UEF (for NG & LP) 0.93 0.95 0.96 0.95 0.96 0.95 0.96

Flow rate

(DHW)

35°F (19°C) temp rise

6.8 GPM

(26 L/m)

8.4 GPM (32 L/m) 10.1 GPM (38 L/m) 11.2 GPM (42 L/m)

45°F (25°C) temp rise

5.3 GPM

(20 L/m)

6.5 GPM (25 L/m) 7.8 GPM (30 L/m) 8.7 GPM (33 L/m)

67°F (36°C) temp rise

3.4 GPM

(13 L/m)

4.3 GPM

(16 L/m)

4.4 GPM

(17 L/m)

5.1 GPM

(19 L/m)

5.3 GPM

(20 L/m)

5.6 GPM

(21 L/m)

5.8 GPM

(22 L/m)

Dimensions 17.3" (W) x 27.4" (H) x 13.2" (D)

Weight 62 lbs (28 kg)

73 lbs (33 kg)

68 lbs (31 kg)

77 lbs (35 kg)

73 lbs (33 kg)

77 lbs (35 kg)

73 lbs (33 kg)

Installation type Indoor or outdoor wall-hung

Venting type Forced draft direct-vent

Ignition Electronic ignition

Water pressure 15–150 PSI

Natural gas supply pressure (from source)

3.5" WC–10.5" WC

Propane gas supply pressure (from source)

8" WC–13" WC

Natural gas manifold pressure (min-max)

-0.04" WC–

-0.40" WC

-0.03" WC–

-0.55" WC

-0.03" WC–

-0.76" WC

-0.03" WC–

-0.96" WC

Propane gas manifold pressure (min-max)

-0.03" WC–

-0.40" WC

-0.02" WC–

-0.55" WC

-0.02" WC–

-0.76" WC

-0.02" WC–

-0.96" WC

Minimum flow rate 0.5 GPM (1.9 L/m), < 0.01 GPM (0.04 L/m) option for "A2" models*

Connection sizes

Cold water inlet 3/4" NPT

How water outlet 3/4" NPT

Gas inlet 3/4" NPT

Power supply

Main supply 120V AC, 60 Hz

Maximum power consumption

200 W (max 2 A), 350 W (max 4 A) with external pump connected

Materials

Casing Cold rolled carbon steel

Heat exchangers Primary heat exchanger: stainless steel Secondary heat exchanger: stainless steel

Venting

Exhaust 2" or 3" PVC, CPVC, approved polypropylene and stainless steel 2" or 3" special gas vent type BH (Class II, A/B/C)

Intake 2" or 3" PVC, CPVC, approved polypropylene and stainless steel 2" or 3" special gas vent type BH (Class II, A/B/C)

Vent clearances 0" to combustibles

High elevations 10,100 feet for both NG or LP gas. Please refer to Installation Manual for additional details and instructions.

Safety devices Flame rod, APS, ignition operation detector, water temperature high limit switch, exhaust temperature high limit sensor, power surge fuse, burner high limit fuse, vent installation detector (VID)

* Available for NPE-A2 models configured in an optional ComfortFlow® recirculation mode. Energy consumption will increase when the system is configured for recirculation.

Navien reserves the right to change specifications at any time without prior notice.

Please refer to www.Navieninc.com to verify you have the most current information.

Accessories

NaviLink® Wi-Fi Control

PBCM-AS-001

H2Air® Kit AHU Optimizer

PNBD-000001

Remote Controller 30022717B

Plumb Easy Valve 3/4" with Relief Valve 30009323A

Plumb Easy 3 Valve Set for NPE-A2 30022163A

Plumb Easy Valve 3/4" with Relief Valve (designed to work with pipe cover) 30012581A

NaviCirc™ Recirculation Valve for NPE-A2

NaviCirc™

PFFW-SXX-001

NaviCirc™ Kit 30022965A

HotButton® Components

Wall Plate

GXXX001427

Push Button

GXXX001426

Residential Neutralizer 1 unit

GXXX001322

Residential Replacement Media

GXXX001323

Light Commercial Neutralizer

GXXX001324

Light Commercial Replacement Media

GXXX001328

Commercial Neutralizer

GXXX001325

Commercial Replacement Media

GXXX001329

2" and 3" Wall Flange and Vent Terminator Kit

2" Kit 30010747A

3" Kit 30003873B

PeakFlow S Scale Prevention System

GPWC1101AC001

PeakFlow S Replacement Filter

GWFC110GD001

Common Vent Collar Kit 30014367B

Includes Cascade Cable

GXXX000546

Cascade Cable

GXXX000546

External Pump Wire

GXXX001319

Vent Cap NPE-2 Series 30025801A

Pipe Cover NPE-2 Series 30025812A

Use with Isolation Valves 30012581A

Ready-Link® Rack

Base (V3)

GFFMKDIZUS-005

Add-on (V3)

GFFMKDIZUS-006

A B C D E F G

Air Intake Φ 2"

Exhaust Gas Vent Φ 2"

Hot Water Outlet Φ 3/4"

Gas Inlet Φ 3/4"

Recirculation Inlet Φ 3/4"

Condensate Outlet Φ 1/2"

Cold Water Inlet Φ 3/4"

Connection Size

Overhead View

Supply Connections

Front View

.4 in (6 m m

.8 in (7 m m in

(7 m m

6.7 in (170 mm)4.5 in (115 mm)

0.4 in

(1 m m

1.5 in (38 mm) 14.3 in (364 mm)

2.6 in

(6 m m

A B

.2 in (3 m m

2.3 in (60 mm)

3.0 in (77 mm)

8.3 in (212 mm)

17.3 in (440 mm)

2.4 in

(6 m m

2.4 in

(6 m m

C D E F G

6.

in (1 m m

A B C D E F

Air Intake Φ 2"

Exhaust Gas Vent Φ 2"

Hot Water Outlet Φ 3/4"

Gas Inlet Φ 3/4"

Condensate Outlet Φ 1/2"

Cold Water Inlet Φ 3/4"

Connection Size

Overhead View

Supply Connections

Front View

.4 in

(6 m m

.8 in (7 m m

.2 in (3 m m

2.

in (6 m m

C E FD

2.3 in (60 mm)

11.3 in (289 mm)

17.3 in (440 mm)

2.4 in

(6 m m

6.

in (1 m m in

(7 m m

6.7 in (170 mm)4.5 in (115 mm)

0.4 in

(1 m m

1.5 in (38 mm) 14.3 in (364 mm)

2.6 in

(6 m m

A B balfrey & johnston, inc.

Serving the Construction Industry Since 1959 13050 Northend Ave. Oak Park MI 48237 Phone: 313.864.2800 Fax: 313.864.7219 Branch Offices in Grand Rapids, Mt. Pleasant, Kalamazoo www.Balfrey-Johnston.com

Water Heater Comparison – Significant differences highlighted

Equipment Specified Model Total Requested Model Total Quantity Model Number BTU Input GPH Recovery Gallons Storage Efficiency - UEF

Warranty Information Heat Exchanger Warranty-Parts Warranty-Labor Warranty-Tank

Dimensions Height Width/Diameter Depth Cold Water Inlet Hot Water Outlet Gas Inlet Power Supply

Venting and Mounting Venting Mounting Rack & Manifold

Bock OT199N Navien NPE-240S2

60,000 - 199,000 13,300 - 199,900

229 GPH @ 100F Temp Rise 234 @ 100F Temp Rise

99 119 (selected by others)

96% Thermal Efficiency 0.96

3:1 Turndown Ratio 15:1 Turndown Ratio

5 Years 8 Years Dual Stainless Steel

5 Years 5 Years

1 Year 1 Year

5 Year (by selected tank mfg)

78.5" 28.8"

28" 17.3"

13.2"

1-1/2"" 3/4"

1-1/2" 3/4"

1/2" 3/4"

PVC, CPVC, PP PVC, CPVC, PP, SS

Wall Hung Wall Hung or Rack Mounted

Available

Why Navien Tankless Water Heaters?

Navien NPE-2 Series industry innovations:

Dual stainless steel heat exchangers resist corrosion better than copper

Energy efficiency ratings of up to 0.96 UEF

EZNav Multi-line control with built-in intuitive software

Capability to cascade up to 32 NPE-2 units

Common vent capability

Energy Star certification meeting strict EPA efficiency specifications

Navien tankless water heaters help solve application installation issues for:

Restaurants

Schools

Hotels

Medical

Industrial

Leisure

Multi-Family

Public Works Facilities

Navien tankless water heaters provide:

Reliability

Durability

Operating Efficiency

Energy and water conservation

Installation challenges solutions

Navien tankless features and benefits:

Industry leading warranty: 1 year labor, 3 year parts, 8 year heat exchanger

Life expectancy

Mounting options, wall or ReadyLInk rack and manifold system

Turndown ratios up to 15:1

Ease of change out as compared to tank type water heater

Connectivity via NavLink WiFi control

Navien Installations in Michigan

University of Michigan Student Housing

University of Michigan Football Stadium

Central Michigan University Medical School

Montross Schools

Carson City Correctional

Medilodge Assisted Living

Greenhaven Youth Home

Waltonwood Assisted Living

Rivers Edge Brewing

Western Golf & Country Club

On The Border Restaurant

Texas Roadhouse

Utica Minor League Baseball

X

A. Kindt 8/30/22

BIDDER’S SUBSTITUTION REQUEST FORM

Dimensional Metals, Inc. – 58 Klema Drive North – Reynoldsburg, OH 43068 – 800-828-1510

Cornerstone Architects

ARCHITECT

440 Bridge St. NW

STREET ADDRESS

Grand Rapids MI 49503

CITY STATE ZIP

(616)-774-0100

PHONE FAX

Mitchell State Park Campground, South Toilet Shower Bldg 1006177281

PROJECT NAME PROJECT NUMBER

We submit for your Consideration the following Product in addition to the specified Product for the above Project:

As per Section No. 074113

Paragraph No.

2.1

Specified Product - Standing Seam Metal

Roof Panel

We submit our IL2016 Panel System.

(Attached you will find technical data and any laboratory tests, if applicable.)

The following changes will take place to the Drawings and Specifications for the proposed substitution’s proper installation:

A. Dimension changes in drawings - None B. DMI will or will not pay for changes to the design, including engineering and detailing costs caused by the substituted product – Not applicable

C. Effects on other installers - None D. Differences between our panel and panel specified – none E. Warranty differences - None

The undersigned states that the function, appearance, and quality are equivalent or superior to the specified Product.

Submitted By:

Jeff Earley 8/30/2022

SIGNATURE DATE

Dimensional Metals, Inc

COMPANY NAME

58 Klema Drive North

STREET ADDRESS

Reynoldsburg OH 43068

CITY STATE ZIP

419.889.8427 866.863.4334

PHONE FAX

FOR ARCHITECT’S USE ONLY

- ACCEPTED - ACCEPTED AS NOTED - NOT ACCEPTED - TOO LATE

BY DATE

ADDITIONAL REMARKS

PUBLISHED IN ADDENDUM NUMBER -

DYNACLAD® BOX GUTTERINTER-LOCK IL20

ARCHITECTURAL PANEL

Please consult DMI for applicability of test reports for your project.

800.828.1510 • www.dmimetals.com • sales@dmimetals.com

Expansion Clip

INTER-LOCK IL20 is an architectural panel which is snapped together during installation.The panel is an integral interlocking system by design which installs in one direction from a given starting point. A double male starter panel is available (for a minimal setup fee) and may be installed in the middle of a roof area to achieve a symmetrical layout. Inter-Lock is a very flexi-ble panel which works well with a wide range of building designs.

Uses & Applications Product uses include roofs wtih slopes as low as 3:12, vertical fascia, equipment screens, mansards, and wall panels. This system may also be installed on tapered roof areas.

Advantages ·Factory Applied Non-Curing Sealant - for superior watertightness ·Engineered Snap-Together design - for easy installation ·Symmetrical Visual Aesthetics - providing non-directional appearance ·Expansion Clips - allows for thermal expansion and contraction ·Continuous Interlocking Seam - no seam disengagement ·Anti-Siphoning Seam Desgin - prevents water infiltration ·Continuous Roll Formed Lengths - eliminates need for panel lap joints (4’ min. panel length) ·Total System Warranties available - for total confidence

Performance Tested ·UL-580 Wind Uplift ·ASTM E1592 Uniform Static Air Pressure ·ASTM E331 Water Penetration ·ASTM E283 Air Leakage

Seam Cross Section

SEALANT

IN SEAM

PANEL CLIP

FASTENER

STRIATED PANEL PROFILE

(STANDARD)

12", 16" or 17.75”

1.75"

12302020

Since 1988 Dimensional Metals, Inc. (DMI) has specialized in the manufacturing of architectural metal roof and wall panel systems as well as fabricated architectural sheet metal for the construction industry. We are backed by decades of proven metal envelope design, dependable Technical Field Services, and an Engineering Department delivering sustainable solutions. You are sure to find the product that will best enhance your design.

Project Name:

Architect:

Installing Contractor:

General Contractor:

Specification Section:

Custom Colors Available

Colors shown are samples and may vary slightly from actual material. Please consult DMI Color Chart for stocking color availability.

†Metallic colors are directionally sensitive and therefore entire roof areas should be ordered at once time to ensure uniformity.

Double Male Panel is not available in Metallic Colors.

*Brite Red has a clear coat. **Premium colors carry an upcharge.

WHITE

SRI = 85

COBALT BLUE

SRI = 20

PUTTY

SRI = 77

SANDSTONE

SRI = 77

DOVE GREY

SRI = 61

PATINA COPPER

SRI = 58

BRITE RED*

SRI = 44

BEIGE

SRI = 53

STONE

SRI = 49

BROWN

SRI = 25

SLATE GREY

SRI = 47

CHAMPAGNE

SRI = 51

TERRA COTTA

SRI = 43

MUSKET GREY

SRI = 35

SEAPORT

SRI = 35

COLONIAL RED

SRI = 34

METALLIC COPPER

SRI = 49

BURGUNDY

SRI = 34

HEMLOCK GREEN

SRI = 31

EVERGREEN

SRI = 28

SPARTAN BRONZE

SRI = 30

METALLIC SILVER

SRI = 53

CHARCOAL GREY

SRI = 31

SLATE BLUE

SRI = 34

HARTFORD GREEN

SRI = 26

DARK BRONZE

SRI = 27

AGED COPPER

SRI = 43

MATTE BLACK

SRI = 29

ROYAL BLUE

SRI = 27

LEAF GREEN

SRI = 31

CLASSIC BRONZE

SRI = 29

WEATHERED ZINC

SRI = 37

DynaClad®

PVDF Color Chart

P re m iu m C ol or s

M et al lic C ol or s

INTER-LOCK IL20

800.828.1510 • www.dmimetals.com • sales@dmimetals.com

Standard Finishes (N/A on Mill Finishes) DynaClad® PVDF:

Acrylic Coated Galvalume (Acrylume®) Clear Anodized Aluminum

Premium Finishes*

*Premium Colors subject to minimum quantities, extended lead times and upcharges.

Consult DMI for details.

DynaClad® Metallic PVDF:

DynaClad® Brite Red PVDF DynaClad® Cobalt Blue PVDF DynaClad® Standard Color PVDF w/ Clearcoat:

DynaClad® Premium Color PVDF w/ Clearcoat:

Custom Color:

Warranty Finish DynaClad® Paint Finish Galvalume® 20 Year - 6 Month (Substrate) Aluminum Sheet 2 Year (Substrate) Watertight DynaClad® Metal Roofing System:

DynaClad® Metal Roofing System NDL:

Panel Width 12” 16” 18” (17.75”)

Clip Expansion

Stiffener Profile

Substrate 24 ga. Galvalume®

22 ga. Galvalume®

.032 Aluminum

.040 Aluminum

Embossed:

Consult DMI for minimum quantities, upcharges, set up fees and extended lead times

16 oz. Copper 20 oz. Copper

Dimensional Metals, Inc. offers a wide range of innovative roofing and water-proofing products for the building industry. With more than 25 years of field experience, DMI products are engineered for superior performance and ease of installation.

DESCRIPTION

DynaClad® Ultra HT Wind & Water Seal™ is a self-adhering waterproof-ing underlayment composed of a non-slip, cross-laminated polymer film, laminated to a high temperature, aggressive rubberized asphalt adhesive.

A protective split release liner is removed during installation. Ultra HT is engineered for use under metal roofing systems. Ultra HT adheres aggress-ively to most clean, dry substrates including Rigid Insulation, Plywood and Metal Deck. Prime masonry, weathered OSB, exterior grade gypsum roofing products and aged metal surfaces as necessary to achieve good adhesion. Product self-seals around punctures such as screws and nails.

This advanced system limits damage caused by water penetration or leaks.

Ultra HT is ideal for secondary water resistance and prevents damage from ice dams and wind-driven rain.

USES

Whole-roof underlayment for metal roofing. Use at eaves, valleys, rakes and around roof penetrations for protection against ice dams and wind-driven rain. For roof slopes less than 3:12 DMI Requires a full layer of Ultra HT on the entire field of the roof.

FEATURES

Ultra HT offers the contractor and property owner these extra features:

• Uniform thickness for dependable protection

• Self-seals around fasteners including screws and nails

• High elongation, flexible, accommodates expansion and contraction of the substrate

• Compatible with most construction sealants and primers

• Eliminates leaks - multiple layers of protection seals out water

• Rubberized asphalt won’t crack or dry - protects against ice, wind and rain

• Aggressively adheres - sticks to plywood, metal and most other building materials for ease of application.

• Non-slip surface and overlap guide lines for easy installation

• White, heat reflective surfaces allows for adhesion directly to Extruded and Poly-Isosyanurate Insulation

INSTALLATION

• Surface must be clean, dry and free from oil

• Apply in clear, dry weather at 50°F or above

• Clean, dry wood and metal surfaces do not require priming

• Prime masonry, weathered OSB, exterior grade gypsum roofing products and aged metal surfaces as necessary

- masonry must be fully cured

• Minimum 3” side laps and 6” end laps

• Apply uniform pressure with a 2 - 3” hand roller to the seams and overlaps

• Do not expose to direct sunlight for more than 90 days

• Do not install over solvent-based sealants unless fully cured

- active solvents may liquify bottom adhesive surface

• Installer is responsible for compatibility with caulks and sealants

• Material folded over a roof edge cannot be left exposed, fasten every 6” and cover

DynaClad® Metal Roofing System Limited Warranty Ultra HT Wind & Water Seal™ qualifies and is covered under DMI’s DynaClad® Metal Roofing System Limited Warranty.

For the most current Installation Instructions, Warranties, Technical Specifications and Approvals, visit www.dmimetals.com.

58 Klema Drive North - Reynoldsburg, OH 43068 tel: 800.828.1510 - fax: 740.927.3319 web: www.dmimetals.com -

TECHNICAL SPECIFICATIONS

Property Test Method Result

Material Thickness ASTM D 5147 45 Mils Nom.

Flexibility @ -20°F ASTM D 1970 Pass

Vapor Permeance ASTM E 96 <0.02

Nail Sealability ASTM D 1970 Pass

Adhesion to Plywood @ 75°F ASTM D 903/1970 >12 lbs/ft

Adhesion to Plywood @ 40°F ASTM D 903/1970 >2 lbs/ft

PRODUCT DATA

Installation Temperature Range >50°F

Material Color White

Roll Width 36”

Roll Length 67 ft

Carton Weight 52 lbs

Rolls per Carton 1

Area per Carton 200 sqft

Cartons per Pallet 30

Max Temp. 250°F

Results based on modi�ed ASTM standards

DYNACLAD®

DIMENSIONAL METALS, INC.

Proven ∙ Dependable ∙ Sustainable Metal Envelope Systems Since 1988

WHITE

SRI = 85

COBALT BLUE

SRI = 20

PUTTY

SRI = 77

SANDSTONE

SRI = 77

DOVE GREY

SRI = 61

PATINA COPPER

SRI = 58

BRITE RED*

SRI = 44

BEIGE

SRI = 53

STONE

SRI = 49

BROWN

SRI = 25

SLATE GREY

SRI = 47

CHAMPAGNE

SRI = 51

TERRA COTTA

SRI = 43

MUSKET GREY

SRI = 35

SEAPORT

SRI = 35

COLONIAL RED

SRI = 34

METALLIC COPPER

SRI = 49

BURGUNDY

SRI = 34

HEMLOCK GREEN

SRI = 31

EVERGREEN

SRI = 28

SPARTAN BRONZE

SRI = 30

METALLIC SILVER

SRI = 53

CHARCOAL GREY

SRI = 31

SLATE BLUE

SRI = 34

HARTFORD GREEN

SRI = 26

DARK BRONZE

SRI = 27

AGED COPPER

SRI = 43

MATTE BLACK

SRI = 29

ROYAL BLUE

SRI = 27

LEAF GREEN

SRI = 31

CLASSIC BRONZE

SRI = 29

WEATHERED ZINC

SRI = 37

D I M E N S I O N A L M E TA LS , I N C .

† Metallic colors are directionally sensitive and therefore entire roof areas should be ordered at one time to ensure color uniformity.

*Brite Red has a clear coat. ** Premium colors carry an upcharge. SRI = Solar Reflectance Index.

Colors shown are samples and may vary slightly from actual material. CUSTOM COLORS ARE AVAILABLE

DynaClad®

PVDF Color Chart

P re m iu m C ol or s

M et al lic

C ol or s

Till 3457 35 Chips @ 1.25”w X 1”h Dorn Color, Inc.

2020-01

N A T I O N A L R O O F I N G C O N T R A C T O R S A S S O C I A T I O N

D I M E N S I O N A L M E TA LS , I N C .

X LA, LB, LC, LD, and LE approved subs. OA not approved.

A. Kindt 9/2/22

Beginning of Run Housing Style B48 Nominal 48" housing

Middle Fixture(s) Housing Style (replace "x" with qty) (x)/M48 Nominal 48" housing(s)

Ending of Run Housing Style E48 Nominal 48" housing

SPECIFICATIONS

HOUSING: Marine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). NOTE: Contact factory for custom lengths.

REFLECTOR: Full reflector/wire cover – 97% reflectivity.

LENS: UV-stabilized, high impact extruded pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps.

Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.

END CAPS: Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).

HARDWARE: Four stainless steel, tamper-resistant Torx® fasteners secure lens in housing body's lens channel. Electrical Quick Connector supplied (Specify Circuit Qty, see below).

ELECTRICAL: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; maximum driver source of 330μA. Consult factory for flourescent option.

SENSOR & CONTROLS: Optional sensor available with compatible third party controls. To see the full list of compatible controls, click here.

INSTALLATION: Standard six-point mounting per fixture required for Peace of Mind Guarantee®.

PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.

WARRANTY: limited ten (10) year LED warranty. Peace of Mind Guarantee against breakage.

LISTINGS: Luminaire is certified to UL standards by Intertek Testing Laboratories for non-IC and Wet Location installations. IP64 rating per IEC60598 – ceiling mount. Corner, horizontal wall and pendant mount installation – Damp Location only. ADA compliant. Suitable for use as a raceway. Suitable for use in continuous row.

www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2022 Kenall Mfg.Co.

Continuous Row Joiner Band

MILLENIUM STRETCH™

MLHA8 SERIES – STRAIGHT CONTINUOUS RUN

PRODUCT FEATURES:

» Surface mount – ceiling or wall; 8"×48"

» Continuous row mount luminaires

» Peace of Mind Guarantee® against breakage

» ADA compliant

Rounded End Cap

Flat End Cap

Reveal End Cap

End Caps R Rounded F Flat RV Reveal

Finish MW Matte White MB Matte Black LG Light Gray CC Custom Color (Consult Factory)

Lens PP Pearlescent Polycarbonate

Lamp Type 45L35K 45 Watt 3500K LED 45L40K 45 Watt 4000K LED 45L50K 45 Watt 5000K LED 67L35K 67 Watt 3500K LED 67L40K 67 Watt 4000K LED 67L50K 67 Watt 5000K LED 90L35K 90 Watt 3500K LED 90L40K 90 Watt 4000K LED 90L50K 90 Watt 5000K LED

Driver Type DCC Dimming Constant Current Driver

Voltage DV 120-277 Volts 347 347 Volts

Options LEL Integral 8.4W Emergency Battery Backup (45L max, 0oC minimum operating temperature, n/a with 347V) 1RW First Isolated Raceway CDF Captive Diffuser Fasteners DL Damp Location (Interior use NO gasketing) FS Single Fuse & Holder NAT Natatorium Environment Option PH Phillips Head Fasteners PM§ Pendant Mount (Max. 3/8NPT stems by others;

damp only) XC Auxiliary Circuit NLW 2700K White LED Night Light (n/a with 347V) NLA Amber LED Night Light (n/a with 347V)

Accessories CMB§ Corner Mount Bracket (Must be ordered with DL Option) 9500 Torx® Screwdriver D-0552 Torx Driver Bit (Required for CMB Option)

§ PM and CMB not available in conjunction

PROJECT INFORMATION

Job Name

Fixture Type

Catalog Number

Approved by

ORDERING INFORMATION (Ex: MLHA8S-B48-2/M48-E48-R-MW-PP-45L40K-DCC-DV-FS)

Model Finish Lens Lamp Type DriverBegin. Hsg. End Cap Voltage

MLHA8S

Options

B48 Mid. Hsg.

/M48 End. Hsg

E48 DCC

Accessories

MLHA8S-012522

IP64LED ADA

MLHA8S

24" sections available

FF Flat

MWW Matte Wh

PPP Pearlescent Polycarbonate p y 45L35KK K 45 Watt 3500K LED

DCCC Dimming Constant Current Driver

4758lms 49W

MLHA8S B24 4/M48 E48 F MW PP 45L35K DCC DV

DVV 120-277 Volts

TYPE LA

www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2022 Kenall Mfg.Co.

MILLENIUM STRETCH™

MLHA8 SERIES – STRAIGHT CONTINUOUS RUN

For additional photometry, go to www.kenall.com

Nominal Four Foot Fixture Legend End Cap A B C D E F R 49.93 49.34 49.93 46.31 22.50 45.00 F 49.32 49.34 49.32 46.31 22.50 45.00

RV 49.02 49.34 49.02 46.31 22.50 45.00

JOINER BAND –

REQUIRED FOR

ROW MOUNTING

(SUPPLIED)

CORNER MOUNT

8.00"

4.00"

Optional Isolated Raceway

6.89"

6.89"

5.60"

5.60"

DIMENSIONAL DATA

PERFORMANCE

Model: MLHA8-48-F-MW-PP-45L40K-DCC-DV

Maximum Candela = 1568 Located At Horizontal Angle = 15, Vertical Angle = 5

1 - Vertical Plane Through Horizontal Angles (15-195) (Through Max. Cd.)

2 - Horizontal Cone Through Vertical Angle (5) (Through Max. Cd.)

Initial Delivered Lumens

Lamp Type @ 25°C Efficacy (lm/W)

Input Power (W)

Drive Current (mA)

Estd. L70 LED Life (Hrs)

45L35K 4,758 97 49 100 150,000

45L40K 5,072 104 49 100 150,000

45L50K 5,072 104 49 100 150,000

67L35K 7,284 100 73 75 150,000

67L40K 7,765 106 73 75 150,000

67L50K 7,765 106 73 75 150,000

90L35K 9,252 94 98 100 150,000

90L40K 9,864 101 98 100 150,000

90L50K 9,864 101 98 100 150,000

Information above is valid for the recommended Type PP lens type and is subject to change without notice.

Visit www.kenall.com for IES files and additional information.

MLHA8S-012522

45L35K 4,758 97 49 10

Rounded End Cap

Flat End Cap

Reveal End Cap

PRODUCT FEATURES:

» Surface mount – wall or ceiling; nominal 8"×24", 8"×36" 8"×48", 8"×72", 8"×96"

» Extruded aluminum housing with decorative end caps

» Peace of Mind Guarantee® against breakage

» ADA compliant

Length 24 2' 36 3' 48 4' 72 Two 3' (factory connected) 96 Two 4' (factory connected)

End Caps F Flat R Rounded RV Reveal

Finish LG Light Gray MB Matte Black MW Matte White CC Custom Color (Consult Factory)

Lens CP• Clear Polycarbonate PP Pearlescent Polycarbonate

Lamp Quantity (Cross Section)• 1 One 2 Two 3 Three (T8 or T5 only) www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2022 Kenall Mfg.Co.

Lamp Type 2' Lengths 25L35K 25 Watt 3500K LED 25L40K 25 Watt 4000K LED 25L50K 25 Watt 5000K LED 14 F14T5 (rapid start only) 17 F17T8 24I F24T5HO (rapid start only)

3' Lengths 21 F21T5 (rapid start only) 25 F25T8 39 F39T5HO (rapid start only)

4' Lengths 45L35K 45 Watt 3500K LED 45L40K 45 Watt 4000K LED 45L50K 45 Watt 5000K LED 67L35K 67 Watt 3500K LED 67L40K 67 Watt 4000K LED 67L50K 67 Watt 5000K LED 90L35K 90 Watt 3500K LED 90L40K 90 Watt 4000K LED 90L50K 90 Watt 5000K LED 28 F28T5 (rapid start only) 32 F32T8 54 F54T5HO (rapid start only) 54A F54T5HO amalgam (rapid start only)

Ballast/Driver Type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (T8,T5,T5HO) SB Specified Ballast DCC Dimming Constant Current (LED)

Circuit Quantity (n/a with LED) 1 One 2† Two (2 Ballast minimum)

Voltage 120 120 Volts 277 277 Volts 347 347 Volts DV 120-277 Volts

Options ELI P•§ 500 Minimum Lumen Battery Pack (90 Minutes; 32°F Starting Temp) PELI W•§1100 Minimum Lumen Battery Pack (90 Minutes; 32°F Starting Temp) LEL Integral 8.4W Emergency Battery Backup (4' length only, 45L max, 0oC minimum operating temperature, n/a with 347V) CDF Captive Diffuser Fasteners DL Damp Location (Interior use NO gasketing) FS Single Fuse & Holder (one per circuit) NAT§ Natatorium Environment Option PH Phillips Head Fasteners PM§‡ Pendant Mount (Max. 3/8NPT stems by others;

damp only) UC§ • Uplight Component (Pendant Mount only;

stems by others; damp only) MS Motion Sensor (2' and 4' LED only) (n/a with 347 Voltage Option) NLW∞ 2700K White LED Night Light NLA∞ Amber LED Night Light

Accessories CMB‡ Corner Mount Bracket

(Must be ordered with DL Option) 9500 Torx® Screwdriver D-0552 Torx Driver Bit (Required for CMB Option)

TekLink TL50* TL50 Control System (n/a with 347V) (Click here for specifications) TL100 TL100 Control System (Click here for specifications)

Please consult Kenall Applications when ordering controls. Mounting heights above 14' may require alternate sensing technology.

Controls Kit < > Factory Assigned Internal Code

† n/a on 2' T5/T5HO or 3' T5HO fixtures with EL, PEL or TN options

I n/a with 347V P 2' Fixtures have minimum 350-450 lumen battery pack W n/a on 2' fixtures § n/a with 3 lamps

• n/a with LED Lamp Type ‡ PM and CMB not available in conjunction

* LED only. N/A with with MS or CMB options.

N/A with 72" or 96" length.

∞ LED only. n/a with 347V

MILLENIUM STRETCH™

MLHA8 SERIES

SPECIFICATIONS

HOUSING: Marine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes.

REFLECTOR: Full reflector/wire cover – 92% reflectivity.

LENS: UV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.

END CAPS: Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only).

SOCKETS: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.

HARDWARE: Stainless steel, tamper-resistant Torx fasteners secure lens in housing body’s lens channel (four on 24", 36", and 48" housings; eight on 72" and 96" housings).

ELECTRICAL: LED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities, maximum driver source of 330μA. Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims down to 30%. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor.

INSTALLATION: Standard four-point (24" housing), six-point (36" and 48" housing) and twelve-point (72" and 96" housing) mounting required for Peace of Mind Guarantee®. LED product ambient temperature is -30°C to 40°C, unless otherwise noted.

SENSOR & CONTROLS: Optional sensor available with compatible third party controls. To see the full list of compatible controls, click here.

TEKLINK™ TL50: An independent lighting control system embedded in the luminaire, featuring its own occupancy sensor, daylight harvesting and adjustable time-out/dimming settings.

TEKLINK™ TL100: Centralized, wired zonal occupancy and closed-loop daylight harvesting control system. TL100 controllers are standalone devices and ordered separately for luminaire.

Click here for specifications.

PHOTOMETRICS: Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric information, go to www.kenall.com.

WARRANTY: Limited ten (10) year warranty for LED Lamps. Peace of Mind Guarantee against breakage.

LISTINGS: Luminaire is certified to UL standards by Intertek Testing Laboratories for non-IC and Wet Location installations. IP64 rating per IEC60598 – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant.

IP64LED ADA

ORDERING INFORMATION (Ex: MLHA8-48-F-MB-PP-45L40K-DCC-DV-FS-9500)

PROJECT INFORMATION

Job Name

Fixture Type

Catalog Number

Approved by

Model

MLHA8

Finish Lens Lamp Type Ballast/DriverLength End Cap Voltage Controls KitOptions TekLinkAccessoriesLamp Qty Circuit Qty

MLHA8-072722

TYPE LB

488 4'

FF Flat

MWW Matte White

PPP Pearlescent Polycarbonate g 45L35KKK 45 Watt 3500K LED

DVV 120-277 Volts

11 One

11 One

DCCC Dimming Constant Current (LED)

4758LMS

49W

MLHA8 SERIES

MILLENIUM STRETCH™

For additional photometry, go to www.kenall.com

CORNER MOUNT BRACKETCROSS SECTION/DETAILS MOUNTING HOLES

DIMENSIONAL DATA

www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2022 Kenall Mfg.Co.

Nominal Three Foot Fixture Legend LMP End Cap A B C D T8 R 38.524 34.312 16.500 33.000 T8 F 34.312 34.312 16.500 33.000

T8 RV 40.632 34.312 16.500 33.000

T5 R 36.751 32.540 16.344 32.688 T5 F 35.535 32.540 16.344 32.688

T5 RV 38.859 32.540 16.344 32.688

Nominal Two Foot Fixture Legend LMP End Cap A B C D T8 R 26.524 22.312 N/A 21.000 T8 F 25.308 22.312 N/A 21.000

T8 RV 28.632 22.312 N/A 21.000

T5 R 24.940 20.728 N/A 20.875 T5 F 23.724 20.728 N/A 20.875

T5 RV 27.048 20.728 N/A 20.875

Nominal Four Foot Fixture Legend LMP End Cap A B C D

T8/LED R 50.524 46.312 22.500 45.000

T8/LED F 49.308…