20220818 Mitchell SP South TS Replace DWGS MEP 4 of 4_Part2.pdf

FPTA PRIMARY XFMR. 36894 FPTA

FMDPL MAIN SERVICE PANEL #MDP-L 36894 3 400 CU/NM 24297 240 1 20 0.042 0.960 35401 18 35401 42kA FMDPL FA PANEL-A 35401 1 4/0 CU/NM 16673 240 1 625 9.577 0.095 3347 18 3365 10kA FA

MTS1 MTS-1 3347 1 10 CU/M 982 240 1 24 0.590 0.629 2105 0 2105 10kA MTS1 FA1 PANEL-A1 2105 1 10 CU/M 982 240 1 17 0.263 0.792 1666 0 1666 10kA FA1

FLCP LOON CABIN PANEL 3365 1 1/0 CU/NM 9317 240 1 350 0.912 0.523 1760 0 1760 10kA FLCP

"C" VALUE

WIRE

SIZE

MOTOR

CONTR.

TOTAL

IscMAT.

"POINT-BY-POINT" METHOD. VALUES BELOW ARE LINE-TO-LINE.

MIN. AIC

RATING

FAULT CURRENT CALCULATIONS - TOILET BLDG.

f M

FAULT

POINT Isc

FAULT

POINT

PARALLEL

SETS

Source Amps (I)

L*

(LENGTH)PHASE

E

(VOLTS)LOCATION

ASHRAE 2013 9.4.1.1(a-i0)

A1 Restrooms 101,107,108 Restroom/all other restrooms Z1 -- X -- -- -- N/A N/A -- X -- -- Controls thru LCP-1

Mech. 170 Electrical/Mechanical Room -- X -- X -- -- N/A N/A -- -- -- -- --

A2 Showers 103-106 Restroom/all other restrooms Z1 -- X -- -- -- N/A N/A -- X -- -- Controls thru LCP-1L C

P -1

Pa rti al A ut o-

O ff

Fu ll

A ut o- O ff

Sc he du le d O ff

As so ci a-tio ns

NotesDa yl ig ht in g

Si de

Da yl ig ht in g

To pArea Room Name Room #

Zo ne

Lo ca l co nt ro l

Energy Code Area classification Au to

O n

M an ua l O n

Pa rti al A ut o-

O n

Bi -L ev el

Li gh tin g

Type Mount Description Lumen Temp CRI Watts Volt Dim Basis of Design Notes

LA Surface/ Wall

8" Wide, 4' Linear Vandal Resesitant Surface Mount LED Fixture w/Clear Ribbed Polycarbonate lens.

3,712 3500K 80 32.6 120-277V 0-10V

Failsafe #HVL8-XX-LD4-1-STD-35-

UNV-C-ED1D-1-S

or equal by New Star or Kenall millennium stretch.

LED SURFACE MOUNTED LINEAR LIGHTING FIXTURE WITH ONE (1) LED MODULE IN CROSS-

SECTION, STANDARD OUTPUT, 3500 DEGREE K WITH A CRI GREATER THAN 85 AND

NOMINAL DELIVERED LUMEN OUTPUT OF 3,595 LUMENS AND A NOMINAL INPUT WATTS OF

34.6. FIXTURE TO BE MOUNTED IN CONTINUOUS ROW OF MULTIPLE FIXTURES IN FOUR (4)

FOOT AND TWO (2) FOOT LENGTHS TO ACHIEVE THE OVERALL LENGTH INDICATED ON THE

FLOOR PLANS. FIXTURES DIMENSIONS TO BE 8.6” WIDE X 3.58” HIGH X 47.10” LONG FOR

THE NOMINAL 4 FOOT LONG FIXTURE AND 8.6” WIDE X 3.58” HIGH X 25.20” LONG FOR THE

NOMINAL 2 FOOT LONG FIXTURE. NOTE THAT THE MAJORITY OF THE FIXTURES

COMPRISING THE CONTINUOUS ROW SHALL BE 4 FOOT LONG FIXTURES, AS INDICATED ON

THE FLOOR PLAN. THE 2 FOOT LONG FIXTURE IS GENERALLY ONLY USED ONCE IN THE

CONTINUOUS ROW, IF AT ALL. HEAVY DUTY EXTRUDED ALUMINUM BODY WITH DIE-CAST

FLAT END CAPS AND WHITE POLYESTER POWDER COAT FINISH. UV-STABILIZED, ONE-

PIECE EXTRUDED POLYCARBONATE LENS WITH RIBBED DESIGN. FIXTURE TO INCLUDE

CONNECTOR BANDS FOR CONTINUOUS RUN IN THE LENGTH AS INDICATED ON THE FLOOR

PLANS. PROVIDE QUANTITY OF CONNECTOR BANDS AS REQUIRED FOR THE LENGTH OF

RUN SHOWN ON THE FLOOR PLANS. UNIVERSAL 120-277 VOLT OPERATION. U.L. LISTED.

LIFETIME WARRANTY FOR FIXTURE REPLACEMENT FOR ANY FIXTURE DAMAGED DUE TO

VANDALISM. FAILSAFE 8” HARMONY VR LINEAR SERIES HVL8-XX-LD4-1STD-35-UNV-C-ED1D-

S SERIES, WHERE “XX” DENOTES A CONTINUOUS RUN CONFIGURATION WITH MULTIPLE 4-

FOOT AND 2-FOOT-LONG FIXTURES AS REQUIRED TO PROVIDE THE LENGTH INDICATED ON

FLOOR PLAN, OR EQUAL NEW STAR OR KENALL MILLENNIUM STRETCH.

LB

Surface/ Wall

8" Wide, 4' Linear Vandal Resesitant Surface Mount LED Fixture w/Clear Ribbed Polycarbonate lens.

3,712 3500K 80 32.6 120-277V 0-10V Failsafe #HVL8-4-LD4-1-STD-35-UNV-

C-ED1D-1-S

or equal by New Star or Kenall.

LED SURFACE MOUNTED LINEAR LIGHTING FIXTURE WITH TWO (1) LED MODULES IN CROSS-

SECTION, STANDARD OUTPUT, 3500 DEGREE K WITH A CRI GREATER THAN 85 AND

NOMINAL DELIVERED LUMEN OUTPUT OF 3,595 LUMENS AND A NOMINAL INPUT WATTS OF

34.6. FIXTURE DIMENSIONS TO BE 8.6” WIDE X 3.58” HIGH X 47.10” LONG. HEAVY DUTY

EXTRUDED ALUMINUM BODY WITH DIE-CAST FLAT END CAPS AND WHITE POLYESTER

POWDER COAT FINISH. UV-STABILIZED, ONE-PIECE EXTRUDED POLYCARBONATE LENS

WITH RIBBED DESIGN WITH ALUMINUM END CAPS FINISHED TO MATCH HOUSING.

UNIVERSAL 120-277 VOLT OPERATION. U.L. LISTED. LIFETIME WARRANTY FOR FIXTURE

REPLACEMENT FOR ANY FIXTURE DAMAGED DUE TO VANDALISM. FAILSAFE 8” HARMONY

VR LINEAR SERIES HVL8-4-LD4-1-STD-35-UNV-C-ED1D-S SERIES OR EQUAL NEW STAR OR

KENALL MILLENNIUM STRETCH.

LC Surface/ Wall

8" Wide, 2' Linear Vandal Resesitant Surface Mount LED Fixture w/Clear Ribbed Polycarbonate lens.

1,856 3500K 80 16.3 120-277V 0-10V Failsafe #HVL8-2-LD4-1-STD-35-UNV-

C-ED1D-1-S

or equal by New Star or Kenall.

LED SURFACE MOUNTED LINEAR LIGHTING FIXTURE WITH TWO (1) LED MODULES IN CROSS-

SECTION, STANDARD OUTPUT, 3500 DEGREE K WITH A CRI GREATER THAN 85 AND

NOMINAL DELIVERED LUMEN OUTPUT OF APPROXIMATELY 1,856 LUMENS AND A NOMINAL

INPUT WATTS OF APPROXIMATELY 16.3. FIXTURE DIMENSIONS TO BE 8.6” WIDE X 3.58”

HIGH X 25.20” LONG. HEAVY DUTY EXTRUDED ALUMINUM BODY WITH DIE-CAST FLAT END

CAPS AND WHITE POLYESTER POWDER COAT FINISH. UV-STABILIZED, ONE-PIECE

EXTRUDED POLYCARBONATE LENS WITH RIBBED DESIGN. LENS SECURED IN BODY

CHANNELS AND END CAPS AND LOCKS IN PLACE WITH TAMPER-RESISTANT STAINLESS

STEEL TORX CENTER PIN FASTENERS AND SEALED WITH CLOSED CELL GASKETS. FLAT

ALUMINUM END CAPS FINISHED TO MATCH HOUSING. UNIVERSAL 120-277 VOLT

OPERATION. U.L. LISTED. LIFETIME WARRANTY FOR FIXTURE REPLACEMENT FOR ANY

FIXTURE DAMAGED DUE TO VANDALISM. FAILSAFE 8” HARMONY VR LINEAR SERIES HVL8-2-

LD4-1STD-35-UNV-C-ED1D-S SERIES OR EQUAL NEW STAR OR KENALL MILLENNIUM

STRETCH.

LD

Surface/ Wall

11" Round Polycarbonate, Low profile, Opal Lens, Eye- Lid face, Wet Location Listed ,LED Fixture.

1,175 3500K 80 25.0 120-277V 0-10V Failsafe #TRE11-LD4-25W-35-OPL-

WH-UNV-EDD1

or equal by Anyx.

LED SURFACE WALL MOUNTED, LOW PROFILE, HIGH ABUSE SCONCE FIXTURE. 25-WATT,

3500 DEGREE K LED LIGHT ENGINE WITH A NOMINAL DELIVERED LUMEN OUTPUT OF 890

LUMENS; 11.625” DIAMETER X 4” DEEP MAXIMUM, ADA COMPLIANT, ROUND SHAPED

HOUSING. “EYELID” FACE, WITH TOP PORTION SOLID AND BOTTOM PORTION OPAL FINISH

PRISMATIC LENS. COLOR IMPREGNATED POLYCARBONATE HOUSING SUPPORTED BY A

MARINE GRADE DIE-CAST ALUMINUM BODY WITH WHITE POLYESTER POWDER COAT

FINISH. UV-STABILIZED, ONE-PIECE INJECTION MOLDED PRISMATIC POLYCARBONATE

LENS WITH A MINIMUM 0.130” WALL THICKNESS; OPAL FINISH. LENS SECURED TO BASE

PLATE BY TRIM AND SILICONE O-RINGS. DIE FORMED HEAVY GAUGE SPECULAR

ALUMINUM REFLECTOR, SHAPED FOR MAXIMUM EFFICIENCY. PRESSURE DIE CAST

MARINE GRADE ALUMINUM BASE PLATE WITH CHEMICALLY PRIMED AND FINISHED WITH

ELECTROSTATICALLY APPLIED POLYESTER POWDER COAT FINISH; WHITE FINISH.

PROJECTED 130,000 HOUR LED LIFE AT L70. TEN YEAR WARRANTY FOR LED BOARDS;

LIFETIME WARRANTY FOR FIXTURE REPLACEMENT FOR ANY FIXTURE DAMAGED DUE TO

VANDALISM. 120 VOLT ELECTRONIC DRIVER. U.L. LISTED OR EQUAL “ANYX 13 EYELID”

ARV13-YRV-MIN10-15W-3500K-MVOLT-OP-WHT SERIES . OTHER EQUAL FIXTURES WILL BE

CONSIDERED BUT MUST MEET OR EXCEED THE LUMEN OUTPUT OF THE SPECIFIED

FIXTURE AND BE ADA COMPLIANT WITH A MAXIMUM DEPTH OF 4”.

LE Wall Mounted

4' Lensed LED Strip Fixture w/Round Full-Frost Lens.

Include 4' wire guard.

3,809 3500K 80 28.0 120-277V 0-10V Metalux #4SNLED-LD5-37SL-LW-

UNV-L835-CD-1-U-WG/SNF-4FT

or equal by Columbia or Lithonia.

LED SURFACE MOUNTED LENSED STRIP LIGHT FIXTURE; 3,809 NOMINAL LUMENS, 3,500

DEGREE K, GREATER THAN OR EQUAL TO 80 CRI. 4-1/2” WIDE X 3-13/16” HIGH X 4'-0” LONG.

DURABLE CODE-GAUGE STEEL HOUSING WITH 100% ACRYLIC FORMED DIFFUSER TO

PROVIDE A LOW-GLARE DIFFUSED LIGHT DISTRIBUTION. PRE-PAINTED WHITE FINISH.

FIXTURE TO INCLUDE 4-FOOT WIRE GUARD ACCESSORY. UNIVERSAL VOLTAGE DRIVER

CAPABLE OF SUPPORTING VOLTAGES FROM 120 TO 277 VOLT. INPUT WATTAGE OF 28

WATTS, WITH AN EFFICACY OF 124.7 LUMENS/WATT. 50,000 HOUR RATED LIFE AT L80

LUMEN MAINTENANCE. FIVE-YEAR LIMITED WARRANTY. UL LISTED. METALUX 4SNLED-LD5-

37SL-LW-UNV-L835-CD1-WG/SNF-4FT SERIES OR EQUAL COLUMBIA LIGHTING LCL4 SERIES

OR LITHONIA.

OA

Surface/ Wall

LED full cut-off type wall mounted luminaire 2,251 3500K 80 21.0 120-277V 0-10V

Ligman Lighting USA “AUSTIN-

VEKTER 1 SMALL” UVK-30001-21W-

T4-W35-06-120/277V-SCE-F

LED FULL CUT-OFF TYPE WALL MOUNTED LUMINAIRE. HIGH OUTPUT LED LIGHT ENGINE

USING A HIGH EFFICIENCY LED OPTICAL SYSTEM, AND PROVIDING A TOTAL LUMEN

OUTPUT OF 2251 LUMENS AT A COLOR TEMPERATURE OF 3,500 DEGREE K AND A

MINIMUM OF 80 CRI, L80 LUMEN MAINTENANCE OF 50,000 HOURS. FIXTURE TO HAVE A

B.U.G. RATING OF B0-U0-G0. DIE-CAST ALUMINUM HOUSING, WITH A WEDGE, 10.2" WIDE X

3.1" HIGH X 7.7" DEEP. FIXTURE HEIGHT SHALL NOT EXCEED 5.75” IN HEIGHT TO ALLOW

FOR THE FIXTURE TO FIT WITHIN THE HEIGHT OF THE 8”X8” WOOD BEAM WHERE THE

FIXTURE IS NOTED TO BE MOUNTED, AS INDICATED ON THE DRAWINGS. BRONZE FINISH.

FIXTURE TO INCLUDE SURFACE CONDUIT ENTRY BOX AND FROSTED LENS OPTION. TOTAL

FIXTURE WATTAGE TO BE 21 WATTS. FIXTURE TO BE UL LISTED FOR WET LOCATION USE.

FIXTURE TO INCLUDE INTEGRAL POWER SUPPLY (DRIVER), UL LISTED. UNIVERSAL 120-277

VOLT OPERATION. 5-YEAR WARRANTY. LIGMAN LIGHTING USA “AUSTIN-VEKTER 1 SMALL”

UVK-30001-21W-T4-W35-06-120/277V -SCE-F SERIES. EQUAL FIXTURES WILL BE

CONSIDERED, BUT THE FIXTURE MUST MEET OR EXCEED THE LUMEN OUTPUT OF THE

SPECIFIED FIXTURE, HAVE IES TYPE IV OPTICS, HAVE SIMILAR DIMENSIONS FOR THE

FIXTURE IN TERMS OF THE WIDTH AND DEPTH, AND SHALL NOT EXCEED THE MAXIMUM

HEIGHT NOTED IN THE FIXTURE DESCRIPTION.