Attachment 3 Consolidated List of Referencesv2 A0002.pdf

USCGC HEALY (WAGB-420) DRYDOCK AVAILABILITY FY2026

v (Draft-0)

CONSOLIDATED LIST OF REFERENCES

The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution.

All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents.

COAST GUARD DRAWINGS

Coast Guard Drawing 420 WAGB 085-001, Rev G, Docking Plan Coast Guard Drawing 420 WAGB 085-002, Rev F, Tank Capacity Curves Coast Guard Drawing 420 WAGB 101-008, Rev C, Construction Dwg Units 121 & 122 Coast Guard Drawing 420 WAGB 101-019, Rev D, Construction Drawing Unit 250 Coast Guard Drawing 420 WAGB 101-048, Rev D, Construction DWG Units 603-604 Coast Guard Drawing 420 WAGB 101-064, Rev D, Shell Expansion Coast Guard Drawing 420 WAGB 161-3, Rev B, Rudder Horn Coast Guard Drawing 420 WAGB 243-1, Rev A, Shafting Arrangements Coast Guard Drawing 420 WAGB 243-3, Rev C, Shafting Details Coast Guard Drawing 420 WAGB 244-002, Rev C, Tern Tube Bearings and Seals Arrangement and

Details Coast Guard Drawing 420 WAGB 244-507, Rev G, Stave Bearings, Water Lubricated Stern Tube Coast Guard Drawing 420 WAGB 244-508, Rev E, Assembly Drawing Coast Guard Drawing 420 WAGB 256-001, Rev J, Diagram Main Seawater Circulation System Coast Guard Drawing 420 WAGB 259-005, Rev C, Machinery Plant Exhaust Gas Piping A & D Coast Guard Drawing 420 WAGB 505-001, Rev D, Piping General Notes & Installation Details Coast Guard Drawing 420 WAGB 505-008, Rev K, Piping Arrangement Units 104, 114, 124, 134, 144, 810, 820, & 830 Coast Guard Drawing 420 WAGB 505-009, Rev B, Piping Arrangement Units 104, 114, 124, 134, 144, 810, 820, & 830 L/M Coast Guard Drawing 420 WAGB 505-026, Rev F, Piping Arrangements Units 23, 24, 601 & 602 Coast Guard Drawing 420 WAGB 505-027, Rev B, Piping Arrgmnt Units 601 & 602 – L/M Coast Guard Drawing 420 WAGB 517-002, Rev A, Condensate Drain & Reserve Feed Water Tank Coast Guard Drawing 420 WAGB 521-001, Rev F, Diagram Firemain System Coast Guard Drawing 420 WAGB 524-001, Rev P, Diagram Auxiliary Seawater System Coast Guard Drawing 420 WAGB 529-001, Rev C, Diagram Ballast, Main Drainage and Independent

Drainage Systems Coast Guard Drawing 420 WAGB 562-1, Rev E, Rudders Units 021 & 022 Coast Guard Drawing 420 WAGB 562-2, Rev B, Rudder Support System Coast Guard Drawing 420 WAGB 568-001, Rev C, Bow Thruster Installation Arrangement and Details vi (Draft-0)

Coast Guard Drawing 420 WAGB 573-001, Rev B, Crane Pedestals Arr & Dets Coast Guard Drawing 420 WAGB 573-002, Rev D, Boom Rests Coast Guard Drawing 420 WAGB 573-003, Rev A, Science Hoist Coast Guard Drawing 420 WAGB 573-511, Rev F, General Arrangement KB 15-45 Coast Guard Drawing 420 WAGB 573-545, Rev G, Aft. "A" Frame Base Weldment Coast Guard Drawing 420 WAGB 573-546, Rev E, Stbd "A" Frame Base Weldment Coast Guard Drawing 420 WAGB 573-547, Rev -, Hydraulic Cylinder Aft a-Frame Coast Guard Drawing 420 WAGB 573-548, Rev -, Hydraulic Cylinder Starboard a-Frame Coast Guard Drawing 420 WAGB 573-558, Rev C, Aft. "A" Frame Stop Tube Weldment Coast Guard Drawing 420 WAGB 573-559, Rev B, Side "A" Frame Stop Tube Weldment Coast Guard Drawing 420 WAGB 589-005, Rev B, Science Hoist Arrangement Coast Guard Drawing 420 WAGB 589-506, Rev C, General Arrangement Trash Hoist Coast Guard Drawing 420 WAGB 589-507, Rev E, General Arrangement 600Stores Hoist Coast Guard Drawing 420 WAGB 591-501, Rev E, Winch Assembly Oceanographic Coast Guard Drawing 420 WAGB 631-1, Rev D, Paint Schedule & Corrosion Control Coast Guard Drawing 420 WAGB 633-001, Rev -, Zinc Anodes Coast Guard Drawing 420 WAGB 635-001, Rev D, Insulation Layouts & Dets Coast Guard Drawing 420 WAGB 801-001, Rev B, Booklet of Drawings Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420 WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420 WAGB 801-008, Rev A, Hose & Hose Fitting List Coast Guard Drawing 420-WAGB 243-1, Rev A, Shafting Arrangements Coast Guard Drawing 420-WAGB 243-11, Rev D, Propulsion Shafting Handling Gear Coast Guard Drawing 420-WAGB 243-3, Rev C, Shafting Details Coast Guard Drawing 420-WAGB 243-5, Rev C, Propulsion Shafting Alignment Analysis Coast Guard Drawing 420-WAGB 243-502, Rev E, Ovako Coupling AbThese are all set Coast Guard Drawing 420-WAGB 243-6, Rev C, Propulsion Shafting Arrangement Procedures Coast Guard Drawing 420-WAGB 243-7, Rev -, Propulsion Shafting Bearing Reaction Report Coast Guard Drawing 420-WAGB 243-8, Rev A, Shafting Removal Coast Guard Drawing 420-WAGB _244_2, Rev C, Stern Tube Bearings and Seals Arrangement and

Details Coast Guard Drawing 420-WAGB _244_501, Rev G, Icebreaker Variant Seal Coast Guard Drawing 420-WAGB _244_507, Rev G, Stave Bearings, Water Lubricated Stern Tube and

Strut Coast Guard Drawing 420-WAGB 243-1, Rev A, Shafting Arrangements Coast Guard Drawing 420-WAGB 243-11, Rev D, Propulsion Shafting Handling Gear Coast Guard Drawing 420-WAGB 243-3, Rev C, Shafting Details Coast Guard Drawing 420-WAGB 243-5, Rev C, Propulsion Shafting Alignment Analysis Coast Guard Drawing 420-WAGB 243-502, Rev E, Ovako Coupling Ab Coast Guard Drawing 420-WAGB 243-6, Rev C, Propulsion Shafting Arrangement Procedures Coast Guard Drawing 420-WAGB 243-7, Rev -, Propulsion Shafting Bearing Reaction Report Coast Guard Drawing 420-WAGB 243-8, Rev A, Shafting Removal vii (Draft-0)

Coast Guard Drawing 420-WAGB 424-006, Rev E, General Arrangement of Elec Equipment – Transducer Well

Coast Guard Drawing 420-WAGB 581-001, Rev -, Anchor Handling Arrangements and Details Coast Guard Drawing 420-WAGB 801-001, Rev K, Booklet of General Drawings Coast Guard Drawing 420-WAGB_244_2, Rev C, Stern Tube Bearings and Seals Arrangement and

Details Coast Guard Drawing 420-WAGB_244_508, Rev G, Assembly Drawing Coast Guard Drawing 420-WAGB-085-001, Rev G, Docking Plan Coast Guard Drawing 420-WAGB-085-002, Rev F, Tank Capacity Curves Coast Guard Drawing 420-WAGB-085-002, Rev F, Tank Capacity Curves Coast Guard Drawing 420-WAGB-101-001, Rev C, Construction Drawing Units 023-024 Coast Guard Drawing 420-WAGB-101-001, Rev D, Construction Drawing Units 023-024 Coast Guard Drawing 420-WAGB-101-002, Rev C, Construction Dwg Units 101 & 102 Coast Guard Drawing 420-WAGB-101-003, Rev D, Construction Drawing Units 103 & 104 Coast Guard Drawing 420-WAGB-101-003, Rev D, Construction Dwg Units 103 & 104 Coast Guard Drawing 420-WAGB-101-008, Rev C, Construction Dwg Units 121 & 122 Coast Guard Drawing 420-WAGB-101-009, Rev C, Construction Dwg Units 123-124 Coast Guard Drawing 420-WAGB-101-009, Rev C, Construction Dwg Units 123-124 Coast Guard Drawing 420-WAGB-101-012, Rev B, Construction Dwg Units 131-132 Coast Guard Drawing 420-WAGB-101-012, Rev B, Construction Dwg Units 131-132 Coast Guard Drawing 420-WAGB-101-015, Rev C, Construction Dwg Unit 141 & 142 Coast Guard Drawing 420-WAGB-101-019, Rev D, Construction Drawing Unit 250 Coast Guard Drawing 420-WAGB-101-035, Rev C, Construction Dwg Units 442, 443, & 480 Coast Guard Drawing 420-WAGB-101-047, Rev D, Construction Drawing Units 601 & 602 Coast Guard Drawing 420-WAGB-101-047, Rev D, Construction Dwg Units 601-602 Coast Guard Drawing 420-WAGB-101-048, Rev D, Construction Drawing Units 603 & 604 Coast Guard Drawing 420-WAGB-101-050, Rev B, Construction Drawing Units 613 & 614 Coast Guard Drawing 420-WAGB-101-050, Rev B, Construction Dwg Units 613-614 Coast Guard Drawing 420-WAGB-101-051, Rev D, Construction Drawing Units 615 & 616 Coast Guard Drawing 420-WAGB-101-053, Rev D, Construction Drawing Unit 626-000 Coast Guard Drawing 420-WAGB-101-056, Rev B, Construction Drawing Units 703 & 704 Coast Guard Drawing 420-WAGB-101-057, Rev D, Construction Drawing Unit 710 Coast Guard Drawing 420-WAGB-101-057, Rev D, Construction Dwg Unit 710 Coast Guard Drawing 420-WAGB-101-064, Rev D, Shell Expansion Coast Guard Drawing 420-WAGB-101-065, Rev C, Construction Dwg Units 111 & 112 Coast Guard Drawing 420-WAGB-101-071, Rev C, Construction Drawing Unit 701 Coast Guard Drawing 420-WAGB-101-071, Rev C, Construction Dwg Unit 701 Coast Guard Drawing 420-WAGB-101-072, Rev D, Construction Drawing Units 702-705 Coast Guard Drawing 420-WAGB-101-073, Rev E, Construction Dwg Units 720 & 721 Coast Guard Drawing 420-WAGB-161-001, Rev A, Forefoot Casting Coast Guard Drawing 420-WAGB-161-002, Rev D, Shaft Bossing Casting Coast Guard Drawing 420-WAGB-161-003, Rev B, Rudder Horn viii (Draft-0)

Coast Guard Drawing 420-WAGB-161-004, Rev -, Forefoot Transition Castings Coast Guard Drawing 420-WAGB-161-010, Rev -, Stern Tube Casting Coast Guard Drawing 420-WAGB-163-001, Rev D, Sea Chest and Vent Modifications Coast Guard Drawing 420-WAGB-167-002, Rev H, Manhole List Coast Guard Drawing 420-WAGB-184-001, Rev C, Rip-Out Iwo Kongsberg EM 122 Installation Coast Guard Drawing 420-WAGB-184-006, Rev -, Additional Sonar Cable Transit Coast Guard Drawing 420-WAGB-243-001, Rev A, Shafting Arrangements Coast Guard Drawing 420-WAGB-243-002, Rev A, Shaft Forgings Coast Guard Drawing 420-WAGB-243-003, Rev C, Shafting Details Coast Guard Drawing 420-WAGB-245-502, Rev C, Propeller Blade Coast Guard Drawing 420-WAGB-256-001, Rev J, Main Seawater Circulation System Coast Guard Drawing 420-WAGB-264-001, Rev. F, Lube Oil Fill Transfer & Purification System Coast Guard Drawing 420-WAGB-424-004, Rev L, Hull Mounted Transducers Installation Details Coast Guard Drawing 420-WAGB-424-006, Rev E, General Arrangement of Elec Equipment –

Transducer Well Coast Guard Drawing 420-WAGB-424-501, Rev -, Outline / Ice Hardened Sea Chest Coast Guard Drawing 420-WAGB-424-502, Rev -, Outline / Ice Hardened Sea Chest Coast Guard Drawing 420-WAGB-424-617, Rev -, Outline-Ice Hardened Sea Chest for Spare

Transducers Coast Guard Drawing 420-WAGB-521-001, Rev F, Diagram Firemain System Coast Guard Drawing 420-WAGB-524-001, Rev P, Diagram Auxiliary Seawater System Coast Guard Drawing 420-WAGB-535-001, Rev M, Diagram Steam, Feed & Condensate System Coast Guard Drawing 420-WAGB-562-001, Rev E, Rudders Units 021 & 022 Coast Guard Drawing 420-WAGB-568-001, Rev C, Bow Thruster Installation Arrangement and Details Coast Guard Drawing 420-WAGB-591-521 Remote VDT Console Coast Guard Drawing 420-WAGB-591-549 Oceanographic Winch Drives 1 & 2 Coast Guard Drawing 420-WAGB-591-550 Trawl/Core Winch Drives Coast Guard Drawing 420-WAGB-591-551 Overall Block Diagram Science Winch Control Diagram Coast Guard Drawing 420-WAGB-593-004, Rev. B, Diagram Oily Water Oil, and Waste Water

Collecting Systems Coast Guard Drawing 420-WAGB-631-001, Rev D, Paint Schedule & Corrosion Control Coast Guard Drawing 420-WAGB-633-001, Rev D, Zinc Anodes Coast Guard Drawing 420-WAGB-633-002, Rev C, Cathodic Protection System Iso & Elem Wrg Diag Coast Guard Drawing 420-WAGB-671-007, Rev G, Misc Outfitting Items Coast Guard Drawing 420-WAGB-801-001, Rev K, Booklet of General Drawings Coast Guard Drawing FL-1204-3, Rev A, Fleet Welded Padeyes and Links Coast Guard Drawing FL-1702-11, Sheave Inspection Coast Guard Fleet Drawing FL-2804-022, Rev A, Consolidated Visual ID for Cutters (Vessels 65 ft and

Over in Length) Coast Guard Drawing 420 WAGB 243-8, Rev A, Shafting Removal Coast Guard Drawing 420 WAGB 245-501, Rev B, Hub Assembly Coast Guard Drawing 420 WAGB 245-502, Rev C, Propeller Blade ix (Draft-0)

COAST GUARD PUBLICATIONS

Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors

Manual Coast Guard Commandant Instruction (COMDTINST) M10360.3 (Series), Coatings and Color Manual Coast Guard Technical Publication (TP) 4395, Manufacturer's Instruction Book-SWBS Group(s) 243 Coast Guard Technical Publication (TP) 5027, Nov 2003, S9242-Af-Mmc-010 - Hydraulic Shaft

CouplingAll set, Tech pub checked, STD Specs Updated Coast Guard Technical Publication (TP) 5028, Nov 2003, S9243-BV-MMC-010 - Stern Tube Seal

Assembly Coast Guard Technical Publication (TP) 5032, 01-NOV-03, S9245-BN-MMC-010 – Propeller, Fixed

Pitch Hub Assembly Coast Guard Technical Publication (TP) 5054, 01-NOV-03, S6437-CF-MMC-010 – Strainer, 20"

Simplex Coast Guard Technical Publication (TP) 5055, 01-DEC-98, S6437-CH-MMC-010 – Strainer, Plug Type

Duplex Coast Guard Technical Publication (TP) 5061, 01-NOV-03, S9261-BE-MMC-010 - Purification System, Fuel Oil Coast Guard Technical Publication (TP) 5068, 01-NOV-03, S9264-A9-MMC-010 - Purification System, Lube Oil Coast Guard Technical Publication (TP) 5161, 01-NOV-03, S6437-A4-MMA-010 – Duplex Strainers Coast Guard Technical Publication (TP) 5162A, 2023, S9517-AY-MMC-010 - Boiler, Oil Fired

Auxiliary Coast Guard Technical Publication (TP) 5214, 01-NOV-03, SG700-AM-MMC-010 - Hydraulic Power

Unit (HPU), Aft General Service Coast Guard Technical Publication (TP) 5216, S9561-A9-MMC-010 - Hydraulic Steering System Coast Guard Technical Publication (TP) 5217, S9561-D4-MMC-010 - Steering Gear, Electro-Hydraulic Coast Guard Technical Publication (TP) 5218, S9242-AG-MMC-010 - Pilgrim Pintle Nut Coast Guard Technical Publication (TP) 5219, S9243-BW-MMC-010 - Rudderstock Seal Coast Guard Technical Publication (TP) 5220, Sept 2005, S9568-AT-MMC-010 - Bow Thruster Coast Guard Technical Publication (TP) 5221, 01-NOV-03, SG700-AP-MMC-010 - A-Frames Coast Guard Technical Publication (TP) 5223, SWBS 572, 2017, Dumbwaiter (200 Lb Capacity) – Model

20700 Coast Guard Technical Publication (TP) 5243, Nov 2013, SG811-B4-MMC-010 – Crane, Electro-

Hydraulic Telescoping Boom – Model TB60-65 Coast Guard Technical Publication (TP) 5244 July 2004, SG811-B5-MMC-010 – Single Articulating

Boom Crane – Model K40-55 Coast Guard Technical Publication (TP) 5245, 2022, SG811-C5-MMC-010 - Crane, Primary Telescoping

Boom Pedestal Type – Model 100-55 Coast Guard Technical Publication (TP) 5246 July 2004, SG811-B5-MMC-010 – Single Articulating

Boom Crane – Model K15-45, s/n 1867 - Coast Guard Technical Publication (TP) 5249, SWBS 589, 2017, SG825-A3-MMC-010 - 1000 Lb

Capacity Stores Hoist x (Draft-0)

Coast Guard Technical Publication (TP) 5250, SWBS 589, 2017, SG825-AY-MMC-010 - 6000 Lb Capacity Science Hoist

Coast Guard Technical Publication (TP) 5251, SWBS 589, 2017, SG825-AZ-MMC-010 - 600 Lb Capacity Trash Hoist

Coast Guard Technical Publication (TP) 5262, SWBS 591, May 2020, Science Winch, Mechanical System & Wire Handling (Volume 1)

Coast Guard Technical Publication (TP) 5263, SWBS 591, Nov 2003, Science Winch, Mechanical System & Wire Handling (Volume 2)

Coast Guard Technical Publication (TP) 5274, 2007, S9633-AG-MMC-010 - Impressed Current Cathodic Protection System

Coast Guard Technical Publication (TP) 5336, 2007, The Cranesmart "Lmi" System Coast Guard Technical Publication (TP) 5359, 2023, Boiler Water Management System – Chem Aqua

Water Treatment Program Coast Guard Technical Publication 9233 (TP 9233), Science Winch Drives and Control System, SWBS

591, May 2023 Coast Guard Technical Standard (TS) 591, Rev -, Oceanographic Research Equipment Fire Prevention and Response Healy Tank Log.xlsx Surface Forces Logistics Center Standard Specification (SFLC Std Spec) 0740, 2022, Welding and Allied

Processes Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General

Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2014, Welding and

Allied Processes Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes.

Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), Latest Version, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 0850 (SFLC Std Spec 0850), 2020, General

Requirements for Drawing Preparation Surface Forces Logistics Center Standard Specification 3041 (SFLC Std Spec 3041), 2022, Shipboard

Electrical Cable Test Surface Forces Logistics Center Standard Specification 3042 (SFLC Std Spec 3042), 2022, Shipboard

Electrical Cable Removal, Relocation, Splice, Repair, and Installation Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 0000), 2022, Auxiliary

Machine Systems Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2020, Auxiliary

Machine Systems Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary

Machine Systems Surface Forces Logistics Center Standard Specification 5000 (SFLC Std Spec 5000), 2022, Auxiliary

Machinery Systems Surface Forces Logistics Center Standard Specification 5550 (SFLC Std Spec 5550), Latest Version, xi (Draft-0)

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirement for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2022, Requirements for Preservation of Ships Structures

Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), Latest Version, Requirements for Preservation of Ship Structures

Surface Forces Logistics Center Technical Standard 505-2 (SFLC TS 505-2), Hoses and Expansion Joints Coast Guard Technical Publication (TP) 5032, Propeller, Fixed Pitch Hub Assembly Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2022, General

Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2022, Welding and

Allied Processes

OTHER REFERENCES

American Bureau of Shipping (ABS), 2, Rule Requirements for Survey After Construction, 2009, Part 7, Appendix Section 10, Guide for Bronze and Stainless Steel Propeller Castings American Society for Nondestructive Testing (ASNT), Recommended Practice No. SNT-TC-1A, 2020, Personnel Qualification and Certification in Nondestructive Testing American Society for Nondestructive Testing (ASNT), Standard No. ANSI/ASNT CP-189-2020, 2020, ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel American Society of Mechanical Engineers (ASME) B16.34, 2020, Valves-Flanged, Threaded, and

Welding End American Welding Society (AWS) B1.10M/ B1.10, 2016, Guide for Nondestructive Examination of

Welds American Welding Society (AWS) B1.11M/B1.11, 2015, Guide for the Visual Examination of Welds American Welding Society (AWS) D1.1/D1.1M, 2020, Structural Welding Code – Steel American Welding Society (AWS) D3.5, 2000, Guide for Steel Hull Welding ASTM International (ASTM) D1330, 2004, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D1330, 2010, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D1330, 2015, Standard Specification for Rubber Sheet Gaskets ASTM International (ASTM) D3359, 2023, Standard Test Methods for Measuring Adhesion by Tape

Test ASTM International (ASTM) D4541, 2022, Standard Test Methods for Pull-Off Strength of Coatings

Using Portable Adhesion Testers ASTM International (ASTM) D5363, 2016, Standard Specification for Anaerobic Single-Component

Adhesives (AN) ASTM International (ASTM) F992, 2017, Standard Specification for Valve Label Plates ASTM International (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting

Corrosion xii (Draft-0)

ASTM Internationals (ASTM) G46, 2018, Standard Guide for Examination and Evaluation of Pitting Corrosion

Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment

Code of Federal Regulations (CFR) Title 46, Part 61, Section 05, 2013, Drydock Examination Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D (2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Federal Specification (Fed Spec) QQ-N-281D(2), Oct 1985, Nickel-Copper Alloy Bar, Rod, Plate, Sheet, Strip, Wire, Forgings, and Structural and Special Shaped Sections Huber A-Frame Drawing HI-571-1001, Rev C Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-61, 2019 Edition, Pressure Testing Of Steel Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-67, 2022 Edition, Butterfly Valves Manufacturers Standardization Society of the Valve and Fittings Industry (MSS) SP-72A, 2010 Edition, Ball Valves with Flanged or Butt-Welding Ends for General Service Manufacturers' Standardization Society of the Valve and Fittings Industry (MSS) SP-80, 2019 Edition, Bronze Gate, Globe, Angle and Check Valves MIL PRF-16173 w/Interim Amendment 2, 2017, Corrosion Prevention Compound, Solvent Cut Back, Cold Application MIL-PRF-24176C, 2020, Cement, Epoxy, Metal Repair and Hull Smoothing MIL-PRF-24647D, 2021, Paint System, Anticorrosive and Antifouling, Ship Hull MIL-PRF-24667C w/Int. Amendment 1, 2018, Coating System, Non-Skid, for Roll, Spray, or Self-

Adhering Application MIL-PRF-900, 2020, Rubber Gasket Material, 45 Durometer Hardness MIL-S-2191, Nov 1992, Repair Welding, Weld Cladding, Straightening, and Cold Rolling or Main

Propulsion Shafting MIL-S-45180D, 1998, Sealing Compound, Gasket, Hydrocarbon Fluid and Water Resistant MIL-STD-1689A, 1990, Fabrication, Welding, and Inspection of Ships Structure MIL-STD-2199B, 2020, Covering for Waterborne Main Propulsion Shafting on U.S. Naval Surface Ships and Submarines Naval Sea Systems Command (NAVSEA) 0640-LP-119-0175, 2019, NAVSEA OP 4 Rev 12, Ammunition and Explosives Safety Afloat Naval Sea Systems Command (NAVSEA) 0943-LP-017-2010, Technical Repair Standard for Surface

Ships Main Propulsion Shafting Naval Ship's Technical Manual (NSTM) Chapter 081, Oct 2006, Waterborne Underwater Hull Cleaning of Navy Ships Naval Ship's Technical Manual (NSTM) Chapter 245, Mar 2003, Propellers Naval Ship's Technical Manual (NSTM) Chapter 556, Rev 9, Hydraulic Equipment Power Transmission and Control Naval Ships Technical Manual S9086-GY-STM-010, 2021, Chapter 221 xiii (Draft-0)

NAVSEA Dwg 803-1385664, Bearings, Stern Tube & Strut NAVSEA Dwg 803-2145807, Propulsion Shafting & Components NAVSEA Dwg 803-4435837, Rev B, Propeller

NAVSEA SG700-AM-MMC-010/34712, POWER UNIT, HYDRAULIC, AFT GENERAL SERVICE

NAVSEA SG700-AP-MMC-010, Rev -; Preliminary Operation & Maintenance Manual for WAGB-20

Polar Icebreaker a-Frames NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for

Fabrication, Welding, and Inspection of Submarine Structure Rugged Controls RPC-90x Programmable Controller Operations and Maintenance Manual Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2013, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C6183, 2019, Cork and

Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) C-6183A, 2019, Cork and Rubber Composition Sheet; For Aromatic Fuel and Oil Resistant Gaskets Society of Automotive Engineers (SAE) Aerospace Material Specification (AMS) G-6032, 1999, Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), 2016, Solvent Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.1 (SSPC-SP 1), Solvent

Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.11 (SSPC-SP 11), 2020, Bare Metal Power Tool Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Specification No.3 (SSPC-SP 3), Power

Tool Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation

Standard SSPC-SP 10 (WAB)/NACE WAB-2, 2015, Near-White Metal Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE International (NACE) Joint Surface Preparation Standard SSPC-SP 7 (WAB)/NACE WAB-4, 2015, Brush-Off Wet Abrasive Blast Cleaning

The Society for Protective Coatings (SSPC)/NACE Joint Surface Preparation Standard SSPC-SP 10/NACE No.2 Near-White Blast CleaningUpdated version?

No Rev needed.

The Society for Protective Coatings SSPC-SP 10/NACE No.2, Jan 2007, Near-White Blast Cleaning The Society for Protective Coatings SSPC-SP 11, Jul 2012, Power Tool Cleaning to Bare Metal WARTSILA Dwg. H72031-04 Rev 1, GA OF 31.400” MOD 31.100 TYPE MB SEAL