Attachment 7 VA log 2.pdf

This document is an electrical inspection checklist used to verify compliance with the National Electrical Code (NEC) for services, feeders, branch circuits, motors, air-conditioning and refrigerating equipment, transformers, capacitors, elevators, electric-vehicle charging equipment, signs, neon wiring, grounding and bonding, and emergency/standby systems. The checklist is organized into multiple sections corresponding to different electrical installation categories.

The document contains detailed inspection activities for each category with corresponding NEC references. For services, feeders, and branch circuits, inspectors verify single service drops, adequate clearances, proper support systems, underground conductor burial depths, service equipment ratings, disconnecting means locations, and overcurrent protection. For feeders, the checklist confirms adequate conductor sizing, proper wiring methods, disconnecting means ratings, outside feeder protection, and panelboard provisions. Branch circuit inspections address wiring methods, overcurrent protection, proper ratings, conductor sizing, receptacle requirements, and voltage limitations. The commercial and industrial section includes specialized checklists for motors (ampacity verification, overload protection, disconnects), air-conditioning equipment (conductor sizing, overcurrent protection, disconnecting means), transformers (overcurrent protection, ventilation, liquid-insulated installations), capacitors (enclosures, conductor sizing, discharge means), elevators (voltage limitations, working clearances, wiring methods, disconnecting means), electric-vehicle charging (coupler suitability, cable safeguards, personal protection), signs and outline lighting (outlet requirements, bonding, grounding), and neon secondary circuits. The document also addresses grounding and bonding requirements and emergency/standby systems including legally required and optional systems and fire pumps. Each inspection item includes checkboxes, NEC article references, and space for inspector comments documenting compliance status.