Attachment 6 VA log 1.pdf

This document is an Electrical Inspection Checklist for Hazardous Locations that provides standardized inspection procedures across multiple facility types and hazard classifications. The checklist was completed on 11/14/2024 at the El Paso VA Clinic North East location by Inspector Sigel J. Guezman.

The checklist contains eight separate inspection checklists organized by facility type and hazard classification: Class I Locations (Checklist 8-1), Class II Locations (Checklist 8-2), Class III Locations (Checklist 8-3), Commercial Garages (Checklist 8-4), Aircraft Hangars (Checklist 8-5), Motor Fuel-Dispensing Facilities (Checklist 8-6), Bulk Storage Plants (Checklist 8-7), and Spray Application, Dipping, and Coating Processes (Checklist 8-8). Each checklist specifies inspection activities with corresponding National Electrical Code (NEC) references and includes columns for documenting inspection results and comments. The inspection activities verify compliance with electrical safety requirements including area classification confirmation, wiring method suitability, seal and connector installation, equipment temperature markings, grounding and bonding paths, equipment ratings and enclosures, GFCI protection where required, and specific hazard mitigations such as battery charger and fuel dispenser placement. Most items in the completed checklists are marked as passed with notations such as "good condition," "properly marked," "correct rating," or "confirmed." The document serves as a comprehensive compliance verification tool for electrical installations in facilities with hazardous locations.