2020.8.6. Add 3 083616.13 - BARN DOOR.doc
DOC document 41 KB Posted
- Attached to
- Y1DA--Expand First Floor B-1 for PACT - 610-311
- Solicitation number
- 36C25020B0004
About this file
This document contains construction specifications for sliding barn doors for a Department of Veterans Affairs project. The specifications call for aluminum-framed sliding barn doors with wood door leaves, aluminum track and valance components, soft-closing damper mechanisms, and stainless steel pull handles. Door frames are to be powder coated aluminum in silver finish. Installation requirements include fire treated blocking and alignment of doors to close against walls without gaps and open and close smoothly. Adjustment and cleaning requirements are also outlined. The related federal contract opportunity is for expanding the first floor of Building 1 at the VA Northern Indiana Healthcare System in Fort Wayne for Primary Care under solicitation number 36C25020B0004.
View the file
Other files
Show all 45
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VA Northern Indiana Healthcare System, Fort Wayne
VA: 610-311 Expand Bldg 1 - 1st Floor Primary Care
Fort Wayne, IN 46845 03-30-2018
Const. Documents Submission
02-01-2016
SECTION 08 3616.13
BARN (SLIDING) DOOR
PART 1 - GENERAL
1.1 SUMMARY
A. Sliding Barn Doors - flush wood, aluminum frames and related hardware.
1.2 RELATED SECTION
A. Not Used
1.3 SUBMITTALS
A. Comply with Section 01 33 00 – Submittal Procedures
B. Product Data: Submit manufacturer’s product data, including installation instructions.
C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details, indicating dimensions, tolerances, materials, components, hardware, finish, options, and accessories. Shop Drawings to show required blocking by others.
D. Samples: Submit manufacturer’s samples of the following sliding door components:
1. Door veneer or laminate sample
2. Aluminum Frame finish sample E. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.
F. Warranty Documentation: Submit manufacturer’s standard warranty.
G. Test Reports: Submit acoustical reports or UL1784 as applicable.
1.4 QUALITY ASSURANCE
A. Product Options: Drawings indicate size, profiles, and dimensional requirements of interior aluminum frames and doors.
B. Source: Obtain sliding aluminum framed doors and hardware from single source.
C. Manufacturer's Qualifications: Manufacturer regularly engaged for past 5 years in manufacture of sliding doors similar to that specified.
1.5 REFERENCES
A. ANSI – American National Standards Institute
1. ANSI 156.18 Materials and Finishes
2. ANSI A117.1 Specifications for making buildings and facilities usable by physically handicapped people.
B. BHMA – Builders Hardware Manufacturers Association
C. DHI – Door and Hardware Institute
D. NFPA – National Fire Protection Association
1. NFPA 80 – Fire Doors and Windows
2. NFPA 101 – Life Safety code
3. NFPA 105 – Smoke and Draft Control Door Assemblies
4. NFPA 252 – Fire Tests of Doors Assemblies
E. AWS – Architectural Woodwork Standards
1.6 PERFORMANCE
A. Aluminum perimeter frames with integral acoustic seals B. Soft self-closing mechanism integrated with top track C. Concealed door guide
1.7 DELIVERY: STORAGE AND PROTECTION
A. Delivery and Acceptance Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.
B. Notify manufacturer immediately of any shipping damage.
C. Storage and Handling Requirements:
1. Store and handle materials in accordance with manufacturer’s instructions.
2. Keep materials in manufacturer’s original, unopened containers and packaging until installation.
3. Store materials in clean, dry area indoors.
4. Protect materials and finish during storage, handling, and installation to prevent damage.
PART 2 - Products
2.1 MANUFACTURER
A. Basis of Design: AD SYSTEMS 2201 100th St. SW, Everett, WA 98204 | Website: http://specADsystems.com | Phone: 425-374-1360 | Attn: Estimating: estimating@specADsystems.com
2.2 INTERIOR SLIDING ALUMINUM-FRAMED DOORS AND PARTITIONS
A. Interior Aluminum-Framed Top-Hung Sliding Doors: Model: AD Systems High Performance Sliding Door System by AD Systems or manufactures equivalent.
B. Frame Profiles: Extruded aluminum frame “wrap” frame with integral vertical jamb (stile pocket).
1. Finish:
a. Standard: Painted Hardcoat (Kynar) Finish. Meets AAMA 2604 Standard Colors: Silver or
b. Custom Powder-Coated Finish: silver C. Door Leafs. All Doors to be factory machined for hardware including pilot and function holes.
1. 1-3/4" Flush Wood Door: Reference Spec Section 081400 Interior Wood Doors or other section as applicable.
D. Door Components:
1. Single Top Track: extruded aluminum track
2. Valances: Extruded aluminum with integral end caps
a. Sloped valance
3. Top Rollers: tandem nylon roller sized to match door weight
4. Concealed Floor Guide: Integral Jamb floor guide
5. Soft-Closer: Soft and self-closing damper mechanism at both sides of door leaf
6. Handles:
a. Straight Pull: 12” long x 1” diameter. Finish: US32D Satin Stainless Steel
E. Accessories:
1. Door Locks:
a. Not Required
b. Mortise Latch and Lock:
1) ADA-6 Thumbturn with Indicator & Lever
c. Magnetic Lock
2. Self-Closing Spring Mechanism
3. Automatic Door Bottom for improved acoustical performance
4. Refer to door hardware specification for full listing of hardware to be provided for full function of door.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine wall openings to receive sliding doors for plumb, level, and square. Note: Finish door operation will be affected by out of tolerance framing.
B. Verify dimensions of wall openings.
C. Examine surfaces to receive top and bottom guide.
D. Notify COR of conditions that would adversely affect installation or subsequent use of sliding doors.
E. Do not begin installation until unacceptable conditions are corrected.
F. Base of door side to be flush or minimal. Rubber Base acceptable.
3.2 INSTALLATION
A. Install sliding doors in accordance with manufacturer’s instructions at locations indicated on the Drawings.
B. Install sliding doors plumb, level, square, and in proper alignment.
C. Install sliding doors to close against walls without gaps
D. Install sliding doors to open and close smoothly.
E. Anchor sliding doors securely in place to supports. Required: Fire treated 2 x 6 blocking required full length of track.
3.3 ADJUSTING
A. Adjust sliding doors for proper operation in accordance with manufacturer’s instructions.
B. Adjust sliding doors to operate smoothly without binding.
C. Repair minor damages to finish in accordance with manufacturer’s instructions and as approved by Architect.
3.4 CLEANING
A. Clean sliding doors promptly after installation in accordance with manufacturer’s instructions.
B. Do not use harsh cleaning materials or methods that could damage materials or finish.
3.5 PROTECTION
A. Protect installed sliding doors from damage during construction.
- - - E N D - - -
Page 4 of 4 - 08 3616.13
File details come from the government source that posted it. Updated .