AB-SDS-Wink-2019-GLOSS.pdf

Wink Part A | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 1 | Page Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 1 | Page Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Page 1/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 2 | Page Revision date: 2019/02/14

P362 + P364 Take off contaminated clothing and wash before reuse.

P391 Collect spillage.

Precautionary Statements (Disposal):

P501 Dispose of contents/container to hazardous or special waste collection point.

Hazards not otherwise classified No specific dangers known, if the regulations/notes for storage and handling are considered.

According to Controlled Products Regulations (CPR) (SOR/88-66)

Emergency overview

SENSITIZER.

May cause sensitization by skin contact.

The statements are based on the properties of the individual components.

3. Composition / Information on Ingredients

Components CAS Number Concentration (Weight)

1-Methoxy-2-propanol 107-98-2 < 5 %

Poly(oxy-1,2-ethanediyl), .alpha.-[3-[3-(2H-benzotriazol-2- yl)-5- (1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- .omega.-[3-[3- (2 H- benzotriazol-2-yl)-5-(1,1- dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]-

104810-47-1 < 3 %

Poly(oxy-1,2-ethanediyl), .alpha.-[3-[3-(2H-benzotriazol-2- yl)-5- (1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]- .omega.-hydroxy-

104810-48-2 < 3 % bis(1,2,2,6,6-pentamethyl-4-piperidyl)sebacate

41556-26-7

< 3 % Glycol Ether DPNP 29911-27-1

< 2%

Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate

82919-37-7

< 1 % Ammonia 7664-41-7 < 1 %

Proprietary (Non-hazardous) N/A > 50 %

4. First-Aid Measures

Description of first aid measures

General advice:

Immediately remove contaminated clothing.

If inhaled:

Remove to fresh air. If breathing is difficult, give oxygen. If symptoms persist, call a physician.

If on skin:

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If symptoms persist, call a physician.

If in eyes:

Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. If symptoms persist, call a physician.

Page 2/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 3 | Page Revision date: 2019/02/14

If swallowed:

Immediately rinse mouth and then drink plenty of water, do not induce vomiting, seek medical attention.

Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions.

Most important symptoms and effects, both acute and delayed:

Symptoms: The most important known symptoms and effects are described in the labeling (see section 2) and/or in section 11. Further important symptoms and effects are so far not known.

Note to physician

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote.

5. Fire-Fighting Measures Extinguishing media Suitable extinguishing media: Preferable: Dry chemical, CO2 or water spray. Unsuitable extinguishing media: Solid water jet ineffective as extinguishing medium

Special hazards arising from the substance or mixture Hazards during fire-fighting: No information available

Advice for fire-fighters Protective equipment for fire-fighting:

Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.

6. Accidental release measures

Personal precautions, protective equipment and emergency procedures Use personal protective equipment as required. Evacuate personnel to safe areas. Avoid contact with skin, eyes or clothing. Keep people away from and upwind of spill/leak.

Methods and material for containment and cleaning up Prevent further leakage or spillage if safe to do so. Dike far ahead of liquid spill for later disposal. Soak up with inert absorbent material. Take up mechanically, placing in appropriate containers for disposal. Clean contaminated surface thoroughly. Do not discharge into drains/surface waters/groundwater.

7. Handling and Storage

Precautions for safe handling Avoid contact with skin, eyes or clothing. Use personal protective equipment as required. Ensure adequate ventilation, especially in confined areas. In case of insufficient ventilation, wear suitable respiratory equipment.

Conditions for safe storage, including any incompatibilities

Keep in properly labeled containers. Keep containers tightly closed in a cool, well-ventilated place. Keep from freezing. Storage Temperature: 15 – 25 C Storage Area:

Protect from freezing. Store in a cool area. Keep out of direct sunlight. Store in a dry area. Store in a dark area.

INCOMPATIBLE MATERIALS: Water reactives, Oxidizing agents

8. Exposure Controls/Personal Protection Ammonia (7664-41-7) US. ACGIH Threshold Limit Values Time Weighted Average (TWA): 25 ppm

Page 3/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 4 | Page Revision date: 2019/02/14

US. ACGIH Threshold Limit Values Short Term Exposure Limit (STEL): 35 ppm

US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Permissible exposure limit: 50 ppm, 35 mg/m3

US. ACGIH Threshold Limit Values Time Weighted Average (TWA): 25 ppm

US. ACGIH Threshold Limit Values Short Term Exposure Limit (STEL): 35 ppm

US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000) Permissible exposure limit: 50 ppm, 35 mg/m3

Engineering Measures

Provide readily accessible eye wash stations and safety showers.

Provide natural ventilation

Personal protective equipment

Respiratory protection:

If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations.

Respiratory protection must be provided in accordance with current local regulations.

Hand protection:

Chemical resistant protective gloves

Eye protection:

Tightly fitting safety goggles (chemical goggles). Wear face shield if splashing hazard exists.

General safety and hygiene measures:

Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. Avoid inhalation of mists. Contact with eyes and skin must be avoided.

Occupational Exposure limit(s) N/A

9. Physical and Chemical Properties liquid Slightly sweet White 8.0-9.0 No data available 100 °C N/A N/A Not applicable Not applicable

Form:

Odor:

Color:

pH value:

Melting point:

Boiling point:

Flash point:

Flammability:

Lower explosion limit:

Upper explosion limit:

Vapor pressure:

Viscosity, Dynamic Solubility in Water Evaporation rate:

Volatile Organic Compounds:

No data available

500-1000 CPS

Yes Not determined < 50 g/l (per AQMD)

Page 4/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 5 | Page Revision date: 2019/02/14

10. Stability and Reactivity

Reactivity:

No Data Available

Chemical Stability:

Stable under normal conditions.

Conditions to avoid:

Extreme temperatures and direct sunlight

Materials to avoid:

Water reactives, Oxidizing agents

Hazardous decomposition products:

Carbon monoxide. Carbon dioxide (CO2), Hydrocarbons

11. Toxicological information

Primary routes of exposure

Routes of entry for solids and liquids are ingestion and inhalation, but may include eye or skin contact. Routes of entry for gases include inhalation and eye contact. Skin contact may be a route of entry for liquefied gases.

Acute Toxicity/Effects

Acute toxicity Assessment of acute toxicity: Virtually nontoxic after a single ingestion. Virtually nontoxic by inhalation. Virtually nontoxic after a single skin contact.

Oral Type of value: LD50 Species: rat Value: > 5,000 mg/kg (OECD Guideline 401) No mortality was observed.

Inhalation Type of value: LC50 Species: rat Value: > 5.8 mg/l (OECD Guideline 403) Exposure time: 4 h No mortality was observed.

Dermal Type of value: LD50 Species: rat Value: > 2,000 mg/kg (OECD Guideline 402) No mortality was observed.

Assessment other acute effects Assessment of STOT single:

Based on the available information there is no specific target organ toxicity to be expected after a single exposure.

Irritation / corrosion Assessment of irritating effects: Not irritating to the skin. Not irritating to the eyes.

Skin Species: rabbit / Result: non-irritant Method: OECD Guideline 404

Page 5/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 6 | Page Revision date: 2019/02/14

Eye Species: rabbit / Result: non-irritant Method: OECD Guideline 405

Sensitization Assessment of sensitization: Caused skin sensitization in animal studies.

Guinea pig maximization test Species: guinea pig / Result: sensitizing Method: OECD Guideline 406

Aspiration Hazard: not applicable

Chronic Toxicity/Effects

Repeated dose toxicity Assessment of repeated dose toxicity: The substance may cause damage to the liver after repeated ingestion.

Effect found in rodents only. The relevance to humans is questionable. Due to the species specific mode of action, the effects are not expected to occur in humans.

Genetic toxicity Assessment of mutagenicity: The substance was not mutagenic in bacteria. The substance was not mutagenic in mammalian cell culture. The substance was not mutagenic in studies with mammals.

Carcinogenicity Assessment of carcinogenicity: No data was available concerning carcinogenic activity.

Reproductive toxicity Assessment of reproduction toxicity: The results of animal studies gave no indication of a fertility impairing effect. Animal studies gave no indication of a developmental toxic effect at doses that were not toxic to the parental animals.

Teratogenicity Assessment of teratogenicity: In animal studies the substance did not cause malformations.

Symptoms of Exposure

The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11. Further important symptoms and effects are so far not known.

12. Ecological Information

Toxicity Aquatic toxicity Assessment of aquatic toxicity:

Acutely toxic for aquatic organisms. The inhibition of the degradation activity of activated sludge is not anticipated when introduced to biological treatment plants in appropriate low concentrations. Toxic to aquatic organisms based on long-term (chronic) toxicity study data.

< 10% Additives:

Toxicity to fish LC50 (96 h) 2.8 mg/l, Oncorhynchus mykiss (OECD 203; ISO 7346; 84/449/EEC, C.1, static) LC50 (96 h) 0.97 mg/l, Lepomis macrochirus (OECD Guideline 203) LC50 (96 h) 7.9 mg/l, Oncorhynchus mykiss (OECD Guideline 203) LC50 (96 h) 0.9 mg/l, Brachydanio rerio (OECD Guideline 203, semistatic)

Page 6/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 7 | Page Revision date: 2019/02/14

The details of the toxic effect relate to the nominal concentration. The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested.

The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested. Nominal concentration.

Aquatic invertebrates EC50 (48 h) 4 mg/l, Daphnia magna (static) The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested. Nominal concentration.

Aquatic plants EC50 (72 h) > 100 mg/l (growth rate), Pseudokirchneriella subcapitata (OECD Guideline 201, static) Nominal concentration.

EC10 (72 h) 10 mg/l (growth rate), Pseudokirchneriella subcapitata (OECD Guideline 201, static) Nominal concentration.

EC50 (72 h) 1.68 mg/l (growth rate), Desmodesmus subspicatus (OECD Guideline 201, static). The details of the toxic effect relate to the nominal concentration. The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested.

Chronic toxicity to aquatic invertebrates No observed effect concentration (21 d) 0.78 mg/l, Daphnia magna (OECD Guideline 202, part 2, semistatic) The product has low solubility in the test medium. An aqueous solution prepared with solubilizers has been tested. Nominal concentration.

Soil living organisms

Toxicity to soil dwelling organisms:

LC0 (14 d) > 1,000 mg/kg, Eisenia foetida (OECD Guideline 207, artificial soil) No effects at the highest test concentration.

No observed effect concentration (56 d) 100 mg/kg, Eisenia foetida (OECD Guideline 222, artificial soil) No effects at the highest test concentration. Toxicity to terrestrial plants Study scientifically not justified.

Other terrestrial non-mammals: Study scientifically not justified.

Microorganisms/Effect on activated sludge

Toxicity to microorganisms: OECD Guideline 209 static activated sludge, domestic/EC50 (3 h): > 1,000 mg/l

Persistence and degradability

Assessment biodegradation and elimination (H2O) Not readily biodegradable (by OECD criteria). Moderately/partially biodegradable. Elimination information 24 % CO2 formation relative to the theoretical value (28 d) (OECD 301B; ISO 9439; 92/69/EEC, C.4-C) (aerobic, activated sludge, domestic, non-adapted)

1 % C-14 labeling (100 d) (OECD 308) (aerobic, sediment) The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.

0.2 % C-14 labeling (100 d) (OECD 308) (anaerobic, sediment) The product has not been tested. The statement has been derived from substances/products of a similar structure or composition.

Page 7/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 8 | Page Revision date: 2019/02/14

Assessment of stability in water Study scientifically not justified.

Information on Stability in Water (Hydrolysis) Study technically not feasible.

Bioaccumulative potential

Assessment bioaccumulation potential Does not significantly accumulate in organisms.

Bioaccumulation potential Bioconcentration factor: 34 (502 h), Oncorhynchus mykiss (OECD-Guideline 305)

Mobility in soil

Assessment transport between environmental compartments Adsorption to solid soil phase is expected.

Additional information

Other ecotoxicological advice:

Do not discharge product into the environment without control

Resin:

Biodegradation 60 %, Exposure time: 28 d, i.e. not readily degradable

Acute and Prolonged Toxicity to Fish LC50: > 100 mgll (Danio rerio (zebra fish), 96 h) Ecotoxicological reports on a comparable product

Acute Toxicity to Aquatic Invertebrates EC50: 70.7 mg/1 (Daphnia magna (Water flea), 48 h) Studies of a comparable product.

Toxicity to Microorganisms EC50: > 10,000 mg/1, (activated sludge) Ecotoxicological reports on a comparable product

13. Disposal Considerations

Dispose of in a licensed facility. Do not discharge into waterways or sewer systems without proper authorization.

Container disposal:

Dispose of in a licensed facility. Do not reuse container.

14. Transport Information

Land transport

USDOT:

Sea transport

IMDG:

Air transport

IATA/ICAO:

Not classified as a dangerous good under transport regulations

Not classified as a dangerous good under transport regulations

Not classified as a dangerous good under transport regulations

Page 8/9

Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part A Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Acrylic Polymer in Water

2. Hazards Identification

According to 49 CFR Criteria & Hazardous Products Regulations (HPR) (SOR/2015-17) Skin Sens. 1B Skin sensitization

Pictogram:

Signal Word:

Warning

Hazard Statement:

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements (Prevention):

P280 Wear protective gloves.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P273 Avoid release to the environment.

P272 Contaminated work clothing should not be allowed out of the workplace.

Precautionary Statements (Response):

P333 + P311 If skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

P303 + P352 If on skin (or hair): Wash with plenty of soap and water.

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part A: RESIN 9 | Page Revision date: 2019/02/14

Federal Regulations:

Chemical: AICS, DSL, IECSC, EINECS, ENCS, KECL, TSCA, US - Released/Listed

SARA 313:

Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 (SARA). This product does not contain any chemicals which are subject to the reporting requirements of the Act and Title 40 of the Code of Federal Regulations, Part 372

Massachusetts, New Jersey or Pennsylvania Right to Know Substance Lists:

>=1% Water 7732-18-5 >=1% Polyacrylate Resin CAS# is a trade secret >=1% Polyether Polyol 25723-16-4 >=1% Dipropylene Glycol 25265-71-8

New Jersey RTK Special Hazardous Substances Lists:

Weight Percent Components CAS-No.

<0.5 % Ammonia 7664-41-7

Massachusetts Right to Know Extraordinarily Hazardous Substance List:

Weight percent Components CAS-No.

<0.5% Ammonia 7664-41-7 15 - 20 ppm Distillates (petroleum), hydrotreated light naphthenic 64742-53-6

CA Prop 65: To the best of our knowledge, this product does not contain any of the listed chemical(s) known to the state of California to cause cancer, birth defects, or other reproductive harm.

16. Other Information

NFPA Hazard Codes:

Health : 1 Fire : 0 Reactivity : 0 Special : 0

SDS Prepared by:

ICP Building Solutions Group

The information contained herein is believed to be accurate. It is provided independently of any sale of the product for purpose of hazard communication as part of ICP Building Solutions Group. Product Safety Program.

It is not intended to constitute performance information concerning the product. No express warranty, or implied warranty of merchantability or fitness for a particular purpose is made with respect to the product or the information obtained herein. Data sheets are available for all ICP Building Solutions Group products. You are urged to obtain data sheets for all ICP Building Solutions Group products you buy, process, use or distribute and you are encouraged and requested to advise those who may come in contact with such products of the information contained therein.

To determine applicability or effects of any law or regulation with respect to the product, user should consult his legal advisor or the appropriate government agency. ICP Building Solutions Group does not undertake to furnish advice on such matters.

15. Regulatory Information

Page 9/9

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page Revision date: 2019/02/14

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Page 1/9

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

2 | Page

Hazard Statement:

May cause an allergic skin reaction.

Harmful if inhaled.

May cause allergy or asthma symptoms or breathing difficulties if inhaled.

May cause respiratory irritation.

May cause damage to organs (Lungs) through prolonged or repeated exposure if inhaled.

Precautionary Statements (Prevention):

Wear eye/face protection.

Wear protective gloves.

Use only outdoors or in a well-ventilated area.

Do not breathe dust/gas/mist/vapors.

In case of inadequate ventilation wear respiratory protection. The type of respiratory protection selected must comply with the requirements set forth in OSHA's Respiratory Protection Standard (29 CFR 1910.134) or regional standards. For additional details, see section 8 of the SDS.

Avoid release to the environment.

Contaminated work clothing should not be allowed out of the workplace.

Wash with plenty of water and soap thoroughly after handling

Precautionary Statements (Response):

If eye or skin irritation or rash occurs: Call a POISON CENTER or doctor/physician.

IF INHALED: Remove person to fresh air and keep comfortable for breathing.

IF ON SKIN (or hair): Wash with plenty of soap and water.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.

Continue rinsing.

Take off contaminated clothing and wash before reuse.

Precautionary Statements (Storage):

Store in a well-ventilated place. Keep container tightly closed. Store locked up.

Precautionary Statements (Disposal):

Dispose of contents/container to hazardous or special waste collection point.

Hazards not otherwise classified No specific dangers known

According to Regulation 1994 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Emergency overview

WARNING:

May cause sensitization by skin contact. HARMFUL IF INHALED. CONTAINS ISOCYANATES. INHALATION

OF ISOCYANATE MISTS OR VAPORS MAY CAUSE RESPIRATORY IRRITATION, BREATHLESSNESS,

CHEST DISCOMFORT AND REDUCED PULMONARY FUNCTION. OVEREXPOSURE WELL ABOVE THE

PEL MAY RESULT IN BRONCHITIS, BRONCHIAL SPASMS AND PULMONARY EDEMA. LONG-TERM

EXPOSURE TO ISOCYANATES HAS BEEN REPORTED TO CAUSE LUNG DAMAGE, INCLUDING

REDUCED LUNG FUNCTION WHICH MAY BE PERMANENT. ACUTE OR CHRONIC OVEREXPOSURE TO

ISOCYANATES MAY CAUSE SENSITIZATION IN SOME INDIVIDUALS, RESULTING IN ALLERGIC

RESPIRATORY REACTIONS INCLUDING WHEEZING, SHORTNESS OF BREATH AND DIFFICULTY

BREATHING. ANIMAL TESTS INDICATE THAT SKIN CONTACT MAY PLAY A ROLE IN CAUSING

RESPIRATORY SENSITIZATION.

Use with local exhaust ventilation. Wear protective clothing.

Wear full face shield if splashing hazard exists.

Page 2/9

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 3 | Page Revision date: 2019/02/14

4. First-Aid Measures

Description of first aid measures

General advice:

Immediately remove contaminated clothing.

If inhaled:

Remove the affected individual into fresh air and keep the person calm. Assist in breathing if necessary. Immediate medical attention required.

If on skin:

Wash affected areas thoroughly with soap and water. If irritation develops, seek medical attention.

If in eyes:

In case of contact with the eyes, rinse immediately for at least 15 minutes with plenty of water. Seek medical attention.

If swallowed:

Rinse mouth and then drink plenty of water. Do not induce vomiting. Never induce vomiting or give anything by mouth if the victim is unconscious or having convulsions. Immediate medical attention required.

Most important symptoms and effects, both acute and delayed:

Symptoms: The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11.

Note to physician

Treatment: Treat according to symptoms (decontamination, vital functions), no known specific antidote, administer corticosteroid dose aerosol to prevent pulmonary odema.

5. Fire-Fighting Measures Extinguishing media Suitable extinguishing media: dry powder, foam

Special hazards arising from the substance or mixture Hazards during fire-fighting: harmful vapors Evolution of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.

Advice for fire-fighters Protective equipment for fire-fighting:

Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.

Further information:

The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations.

3. Composition / Information on Ingredients Components CAS Number Concentration

(Weight) Poly(hexamethylene diisocyanate) 28182-81-2 > 60 % Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

666723- 27-9

< 30 %

Proprietary Proprietary < 25 %

Page 3/9

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 4 | Page Revision date: 2019/02/14

Personal precautions, protective equipment and emergency procedures Use personal protective clothing.

Environmental precautions Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater.

Methods and material for containment and cleaning up Spills should be contained, solidified, and placed in suitable containers for disposal.

7. Handling and Storage Precautions for safe handling Protection against fire and explosion:

Take precautionary measures against static discharges.

Conditions for safe storage, including any incompatibilities

Further information on storage conditions: Keep container tightly closed and dry; store in a cool place.

Storage stability:

If moisture enters isocyanate containers, CO2 forms and pressure builds up.

8. Exposure Controls/Personal Protection Engineering Measures

Provide readily accessible eye wash stations and safety showers.

Provide natural or explosion-proof ventilation adequate to ensure concentrations are kept below exposure limits

Personal protective equipment

Respiratory protection:

Wear respiratory protection if ventilation is inadequate. Wear a NIOSH-certified (or equivalent) organic vapor/particulate respirator. Do not exceed the maximum use concentration for the respirator face piece/cartridge combination. For emergency or non-routine, high exposure situations, use a NIOSH-certified full face piece pressure demand self- contained breathing apparatus (SCBA) or a full face piece pressure demand supplied-air respirator (SAR) with escape provisions.

Hand protection:

Chemical resistant protective gloves

Eye protection:

Tightly fitting safety goggles (chemical goggles). Wear face shield if splashing hazard exists

General safety and hygiene measures:

Handle in accordance with good industrial hygiene and safety practice. Wearing of closed work clothing is required additionally to the stated personal protection equipment. Avoid inhalation of mists. Contact with eyes and skin must be avoided.

Occupational Exposure limit(s)

1, 6 – hexamethylene diisocyanate Time Weighted Average (TWA): ACGIH TLV 0.005 ppm

6. Accidental release measures

Page 4/9

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 5 | Page Revision date: 2019/02/14 liquid Slight, fruity Clear, Colorless to slight yellow N/A No data available Decomposition > 185 °C Not flammable Not applicable Not applicable 445 °C < 0.03 hPa at 20 °C

1.15 g/cm3 at 20 °C

500-1000 CPS

Insoluble - Reacts slowly with water to liberate C02 gas Not determined

10. Stability and Reactivity

Corrosion to metals:

Corrosion effect on metals are not anticipated

Chemical Stability:

Stable under normal conditions.

Conditions to avoid:

Heat, flames and sparks. Protect from freezing.

Materials to avoid:

Water, Amines, Strong bases, Alcohols, Copper alloys

Hazardous decomposition products:

By Fire and High Heat: Carbon dioxide (C02), carbon monoxide (CO), oxides of nitrogen (NOx), dense black smoke, Hydrogen cyanide, Isocyanate, Isocyanic Acid, Other undetermined

Possibility of hazardous Reactions/Reactivity:

Reacts with alcohols. Reacts with amines. Reacts with substances which contain active hydrogen. Reacts with water, with formation of carbon dioxide. The formation of gaseous decomposition products builds up pressure in tightly closed containers.

11. Toxicological information

Primary routes of exposure Routes of entry for solids and liquids are ingestion and inhalation, but may include eye or skin contact.

Routes of entry for gases include inhalation and eye contact. Skin contact may be a route of entry for liquefied gases.

Acute Toxicity/Effects Acute toxicity Assessment of acute toxicity: Virtually nontoxic after a single ingestion. Virtually nontoxic after a single skin contact. Of moderate toxicity after short-term inhalation.

9. Physical and Chemical Properties

Form:

Odor:

Color:

pH value:

Melting point:

Boiling point:

Flash point:

Flammability:

Lower explosion limit:

Upper explosion limit:

Auto ignition:

Vapor pressure:

Density:

Viscosity, Dynamic:

Solubility in Water:

Evaporation rate:

Page 5/9

Safety Data Sheet: Wink. Water Based Dry-Erase - GLOSS – Part B: Isocyanate 1 | Page

1. Identification

Product identifier used on the label

Wink Part B Recommended use of the chemical and restriction on use:

DRY-ERASE COATING

* The “Recommended use” identified for this product is provided solely to comply with a Federal requirement and is not part of the seller's published specification. The terms of this Safety Data Sheet (SDS) do not create or infer any warranty, express or implied, including by incorporation into or reference in the seller's sales agreement.

Details of the supplier of the safety data sheet

Company:

ICP Building Solutions Group 2777 Eagandale Blvd Eagan, MN 55121 651-332-5350

Emergency telephone number

CHEMTREC: 1-800-424-9300

Other means of identification Chemical family: Hydrophilic Aliphatic Polyisocyanate based on Hexamethylene Diisocyanate

2. Hazards Identification

According to Regulation 2012 OSHA Hazard Communication Standard; 29 CFR Part 1910.1200

Classification of the product

Acute Toxicity 4 (Inhalation - mist) Skin Sensitization 1 Specific Target Organ Toxicity – Single Exposure 3 (irritating to respiratory system) Specific target organ toxicity – repeated exposure (Inhalation)

2 (lungs)

Aquatic Acute 3

Label Elements Pictogram:

Signal Word: Danger

Wink Part B | Safety Data Sheet

Safety Data Sheet: Wink.