Amendment_3_Drawing_Sheet_A38_Maintenance_Shop_Door_and_Window_Schedules_and_Details_0003.pdf
PDF 645 KB Posted
- Solicitation number
- 140FGA24R0003
About this file
This document contains construction drawings and schedules for a maintenance shop including door and window schedules, and door and window details. Key details include specifications for hollow metal frames, wood framed windows with aluminum cladding, and overhead doors for the vehicle service area. Hardware groups and glazing types are scheduled. Drawings provide section details for typical interior and exterior doors and windows. The related federal contract opportunity is to replace an existing multipurpose building, maintenance shop, cold storage building and maintenance yard at Luster Heights National Wildlife Refuge for the Department of the Interior Fish and Wildlife Service.
View the file
Other files
Show all 31
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DOOR HARDW ARE GROUPS
SEE SPECIFICATION 087111 DOOR HARDWARE - SEE
084113 FOR STOREFRONT DOOR HARDWARE
-HINGES
-SURFACE CLOSER
-LOCKSET (ENTRANCE LEVER)
-KICKPLATE
-THRESEHOLD
-WEATHERSTRIP
-DOOR SWEEP
-HINGES
-WALL STOP
-LOCKSET (OFFICE)
-SILENCER
-HINGES
-SURFACE CLOSER
-WALL STOP
-LOCKSET (BATHROOM LEVER)
-SILENCER
-HINGES
-WALL STOP
-LOCKSET (STORAGE LEVER)
-DOOR SWEEP
-SILENCER
SET 1 SET 2 SET 3 SET 4
A. FOR FRAME TYPE LOCATIONS, SEE FLOOR PLAN SHEETS.
B. FOR ALUMINUM FRAMED HARDWARE GROUPS, SEE
SPECIFICATION DIVISION 8, SECTION "ALUMINUM -
FRAMED ENTRANCES AND STOREFRONTS." FOR ALL OTHER
OPENING HARDWARE GROUPS, SEE SPECIFICATION DIVISION
8, SECTION "DOOR HARDWARE."
C. FIELD VERIFY ALL ROUGH OPENING DIMENSIONS PRIOR TO
FABRICATION/ INSTALLATION.
D. PAINT ALL HOLLOW METAL FRAMES PER SPECIFICATION
DIVISION 9.
E. IF DOOR NUMBER ENDS IN 'AC' THAT IDENTIFIES DOORS
THAT ARE TO BE ELECTRIFIED. SEE SCHEDULE,
SPECIFICATIONS, HARDWARE GROUPS AND ELECTRICAL
DRAWINGS FOR FURTHER INFORMATION.
GENERAL NOTES
A. INSULATED GLAZING UNIT
B. INSULATED FULLY TEMPERED GLAZING UNIT
C. GLAZING TO BE BIRD CONTROL GLASS GLAZING, SEE
SPECIFICATIONS
D. FULLY TEMPERED GLASS
GLAZING TYPES
AL ALUMINUM
FF FACTORY FINISH
HM HOLLOW METAL
IHM INSULATED HOLLOW METAL
PT PAINT
ST STEEL
ABBREVIATIONS
1. OVERHEAD DOOR. SEE SPEC FOR MORE INFORMATION.
SCHEDULE NOTES
HOLLOW METAL FRAME TYPES
F.F.
S E E
S C H E D
2"
SEE SCHED.
2"
SEE SPECIFICATION 081113
WOOD FRAMED WINDOWS W/ ALUMINUM CLAD EXTERIOR
F.F.
WF
AWNING WINDOW
SEE SPECIFICATION 085200 - GLAZING FOR THESE WINDOWS IS TO BE PER
SPECIFICATION 085200
*ALL OPERABLE WINDOW PORTIONS TO RECEIVE INSECT SCREENS
5'-0"
A38
A38
A38
WG
AWNING WINDOW
4'-0"
A38
A38
A38
OPERABLE
AWNING
PORTION
WALL PER PLAN
SEALANT, EA SIDE
HM FRAME PER SCHED.
DOOR PER SCHED.
DOOR SILENCERS
WALL PER PLAN
SEALANT, EA SIDE
HM FRAME PER
SCHED.
DOOR PER SCHED.
DOOR SILENCERS
FINISH TRANSITION TO
OCCUR UNDER DOOR
DOOR PER SCHED.
FINISH FLOOR PER
PLAN
CONCRETE SLAB SEE
STRUCTURAL DRAWINGS
SEALANT, EA SIDE
HM FRAME PER SCHED.
DOOR PER SCHED.
DOOR SILENCERS
PREFINISHED
METAL FLASHING
PRE-ENGINEERED METAL
BUILDING SYSTEM
PREFINISHED METAL
COVER TRIM
FINISH TRANSITION TO
OCCUR UNDER DOOR
DOOR PER SCHED.
FINISH FLOOR PER PLAN
CONCRETE SLAB SEE
STRUCTURAL DRAWINGS
SLOPE
EXTERIOR CONCRETE
(WHERE OCCURS, RE:
LANDSCAPE DRAWINGS
SEALANT OVER EXPANSION
MATERIAL
THRESHOLD, FLUSH WITH
FLOOR SET IN SEALANT
SEALANT, EA SIDE
HM FRAME PER SCHED.
DOOR PER SCHED.
PRE-FINISHED METAL TRIM
PRE-ENGINEERED METAL
BUILDING SYSTEM
PREFINISHED METAL COVER TRIM
OH DOOR PER
SCHED.
PREFINISHED
METAL FLASHING
PRE-ENGINEERED
METAL BUILDING
SYSTEM
OH DOOR TRACK PER
MANUFACTURER
OH DOOR PER SCHED.
FINISHED FLOOR PER
PLAN
CONCRETE SLAB SEE
STRUCTURAL DRAWINGS
SLOPE EXTERIOR CONCRETE
(WHERE OCCURS, RE:
LANDSCAPE DRAWINGS
SEALANT OVER
EXPANSION MATERIAL
EMBED AS REQUIRED
FOR OH DOOR SILL
OVERHEAD DOOR FRAME
OH DOOR PER
SCHED.
PRE-FINISHED METAL
TRIM
PRE-ENGINEERED METAL
BUILDING SYSTEM
ALUMINUM CLAD WOOD WINDOW -
SEE SPECIFICATION 085200
WOOD TRIM BEYOND
WOOD JAMB EXTENSION
PREFINISHED METAL FLASHING
PRE-ENGINEERED METAL BUILDING SYSTEM
WRAP WINDOW OPENING PER WEATHER
BARRIER WRITTEN RECOMMENDATIONS AND
INSTRUCTIONS
VAPOR BARRIER, RUN DOWN ENTIRETY OF
WALL AND WRAP INTO WINDOW OPENING
WOOD TRIM
ALUMINUM CLAD WOOD WINDOW - SEE
SPECIFICATION 085200
WOOD JAMB EXTENSION
PREFINISHED METAL FLASHING
PRE-ENGINEERED METAL BUILDING SYSTEM
WRAP WINDOW OPENING PER WEATHER
BARRIER WRITTEN RECOMMENDATIONS AND
INSTRUCTIONS
VAPOR BARRIER, RUN DOWN ENTIRETY OF
WALL AND WRAP INTO WINDOW OPENING
SEALANT AND BACKER ROD
WOOD TRIM
ALUMINUM CLAD WOOD
WINDOW - SEE SPEC 085200
WOOD JAMB EXTENSION
PRE-ENGINEERED METAL BUILDING
SYSTEM
WRAP WINDOW OPENING PER
WEATHER BARRIER WRITTEN
RECOMMENDATIONS AND
INSTRUCTIONS
VAPOR BARRIER, RUN DOWN
ENTIRETY OF WALL AND WRAP
INTO WINDOW OPENING
BACKER ROD AND SEALANT
PREFINISHED METAL TRIM
BACKER ROD AND SEALANT
A
AA (DOUBLE)
C
6" 6"
SEE SCHED.
S E E
S C H E D
SEE SCHED.
S E E
S C H E D
OH
SEE SCHED.
S E E
S C H E D
EQ
Y EQ Y EQ Y
EQ
DOOR TYPES SEE SCHEDULE FOR MATERIAL TYPE
FF
A38
_______________ 6
A38
Z
Y PER MANUFACTURER
Z PER MANUFACTURER
A38
A38
A38
A38
A38
A38
A38
M A X
M A X A .F .F
SHEET OF
ORIGINAL DRAWING
NOT ONE INCH
ON THIS SHEET
ACCORDINGLY, IF
ADJUST SCALES
0"
ONE INCH ON
THIS BAR IS
VERIFY SCALE
CHECKED:
REV.
DESIGNED: DRAWN:
DATE
DRAWING NO:
DATE:
DESCRIPTION BY
1"
3R-IA-180-CADD:UMR
MULTIPURPOSE BUILDING AND
MAINTENANCE SHOPALLAMAKEE COUNTY LUSTER HEIGHTS, IOWA
PROJECT NUMBER: 21-RF-015
TDF
MAINTENANCE SHOP DOOR AND WINDOW SCHEDULES
AND DETAILS
SB PSM 03.15.2023
A38
821066A4
DOOR, FRAME, AND HARDWARE SCHEDULE
DOOR
NUMBER
ROOM
NUMBER ROOM NAME
DOOR FRAME
FIRE
RATING NOTES
HARDWARE
GROUP
SIZE
TYPE MTL FINISH GLAZE MTL TYPE FINISHW H T
100-01 100 VEHICLE SERVICE 3' - 0" 7' - 0" 1 3/4" A IHM PT - IHM 1 PT 1
100-02 100 VEHICLE SERVICE 3' - 0" 7' - 0" 1 3/4" A IHM PT - IHM 1 PT 1
100-03 100 VEHICLE SERVICE 16' - 0" 16' - 0" 2" OH ST FF B,C ST - FF 1
100-04 100 VEHICLE SERVICE 14' - 0" 14' - 0" 2" OH ST FF B,C ST - FF 1
100-05 100 VEHICLE SERVICE 16' - 0" 16' - 0" 2" OH ST FF B,C ST - FF 1
100-06 100 VEHICLE SERVICE 16' - 0" 16' - 0" 2" OH ST FF B,C ST - FF 1
100-07 100 VEHICLE SERVICE 14' - 0" 14' - 0" 2" OH ST FF B,C ST - FF 1
100-08 100 VEHICLE SERVICE 3' - 0" 7' - 0" 1 3/4" C IHM PT B,C IHM 1 PT 1
101 101 MEP 6' - 0" 6' - 8" 1 3/4" AA IHM PT - HM 1 PT 4
102 102 UNISEX RR 3' - 0" 6' - 8" 1 3/4" A IHM PT - IHM 1 PT 3
103 103 LOCKER/ KITCHENETTE 3' - 0" 7' - 0" 1 3/4" C IHM PT B IHM 1 PT 2
104 104 OFFICE 3' - 0" 7' - 0" 1 3/4" C IHM PT B IHM 1 PT 2
A38
3 TYPICAL INTERIOR HM DOOR HEAD
A38
5 TYPICAL INTERIOR HM DOOR JAMB
A38
4 TYPICAL INTERIOR HM DOOR SILL
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
6 TYPICAL EXTERIOR HM DOOR HEAD
A38
7 TYPICAL EXTERIOR HM DOOR SILL
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
8 TYPICAL EXTERIOR HM DOOR JAMB
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
9 TYPICAL EXTERIOR OVERHEAD DOOR HEAD
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
10 TYPICAL EXTERIOR OVERHEAD DOOR SILL
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
11 TYPICAL EXTERIOR OVERHEAD DOOR JAMB
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
13 TYPICAL EXTERIOR WINDOW HEAD
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
12 TYPICAL EXTERIOR WINDOW SILL
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
A38
14 TYPICAL EXTERIOR WINDOW JAMB
SCALE IN FEET
SCALE: 1 1/2" = 1'-0"
4.18.2023
| Sheets |
| A16 - MULTIPURPOSE BUILDING DOOR SCHEDULES AND DETAILS |
| A17 - MULTIPURPOSE BUILDING WINDOW ELEVATIONS |
| A18 - MULTIPURPOSE BUILDING WINDOW AND DOOR DETAILS |
File details come from the government source that posted it. Updated .