Moisture Management Technologies
The Government requests that responses be submitted electronically to mary.k.prebensen.civ@mail.mil and william.d.causey7.civ@mail.mil by August 20, 2018 by 5pm EST. This Sources Sought Announcement is to assist the U. S. Army Natick Soldier Research, Development and Engineering Command (NSRDEC), Natick, MA is conducting a market investigation to identify domestic products, suppliers, and manufacturers of moisture management technologies that could be integrated into a textile for the purposes of providing environmental protection, improved wicking performance, or faster draining performance over textiles currently being utilized for individual Soldier uniforms and equipment. Potential solutions shall be capable of being integrated into textile materials, have a service life of at least 120-days under combat/field use, be compatible with current camouflage patterns and material shades, be fast drying, and not significantly reduce the moisture vapor transmission rate of the fabric. The U.S. Army currently utilize materials that have uniform properties throughout the textile structures it employs for uniforms and equipment designed for use by individual Soldiers. Fabrics with these uniform properties offer little control over moving moisture, both from the environment and generated by the Soldier, which results is a number of drawbacks include moisture being trapped is in undesirable areas such as behind body armor or underneath load carriage equipment. This moisture also impedes the performance of E-textiles and moisture sensitive wearable garments. This RFI is focused on developing novel solutions to moisture management by exploring fabric structures that employ moisture management technologies in specific subsections of the fabrics to create capabilities including but not limited to; 1. Channels within the textile to protect conductive fibers and/or integrated sensors from moisture present in the environment or generated by the wearer 2. Wicking fibers, films, and/or membrane strips paired with non-wicking fibers and/or films to produce textiles with zones of wicking and draining. 3. Textiles or films with passive properties to move moisture away from the material along a unidirectional axis. 4. Textiles or films that collect liquid moisture and aggregate it together to increase the draining/drying characteristics of the material. The contents of the White Paper should include: 1. Company address, telephone number, primary contact(s) with e-mail address(es) and CAGE code. 2. Please provide business size (indicate your socioeconomic status), applicable NAICS code, DUNS number and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. (Respondents must be registered in the Central Contractor Registration (CCR) database in order to obtain a DUNS number. Firms may register with CCR at (http://www.ccr.gov). 3. Brief statement of capability demonstrating background, experience, skills, ability and availability to fulfill the Government's requirements described herein, This can also include current or past performance of providing this or similar products to the Government. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the Federal Business Opportunities (FedBizOps) website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to the NSRDEC via e-mail ONLY to mary.k.prebensen.civ@mail.mil and william.d.causey7.civ@mail.mil no later than August 20, 2018 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@mail.mil and william.d.causey7.civ@mail.mil no later than August 13, 2018 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement. .
W911QY-moisturemanagementtechnologies Department of the Army Materiel Command Army Contracting Command Aberdeen Proving Ground
Pre-Solicitation 1/1
8/3/18, 8:34 AM Pulse Generator and Misc. Parts
Added: Aug 11, 2016 7:56 pm
QTY. 1-NAI TECHNOLOGIES, MODEL# 213C400HZ, DISC. VOLTMETER PH ANGLE 400HZ, NSN# 6625-00-435-2192QTY. 6--AGILENT, MODEL# 4263B001, DISC. LCR METER, 100HZ-100KHZ, NSN# 6625-01-462-5483QTY. 4- HP, MODEL# 8114A0PT001, DISC. GENERATOR PULSE, NSN# 6625-01-445-3623QTY. 1- AGILENT, MODEL# 8648B OPT 1EA1E2-1E5-1E6H31, DISC. GENERATOR AM/FM 9KH-2GHZ, NSN# 6625-01-501-5939QTY. 2- RAYTHEON, MODEL# DCR40-13B, DISC. POWER SUPPLY 40VDC 25.00 AMPS, NSN# 6130-01-040-9808QTY. 5- EATON CORP, MODEL# ST100A1, DISC. TRANSFORMER ISOLATION 4:1 5KHZ, NSN# 5950-00-679-5019 The Naval Air Warfare Center, Weapons Division, China Lake, CA intends to procure on a full and open competition basis the following items: 1)Voltmeter Qty. 1, this item is a manufacture sole sourced to NAI TECHNOLOGIES, 282 New York Ave. Huntington, NY 11743; 2) LCR Meter Qty. 6, this item is a manufacture sole sourced to Agilent Products, 5301 Stevens Creek Blvd., Santa Clara, CA. 95051; 3) Generator Pulse Qty. 4, this item is a manufacture sole sourced to HP Inc., 1501 Page Mill Road, Palo Alto, CA. 94304; 4) Generator AM/FM Qty. 1, this item is a manufacture sole sourced to Agilent Products, 5301 Stevens Creek Blvd., Santa Clara, CA. 95051; 5) Power Supply Qty. 2, this item is a manufacture sole sourced to Raytheon Company, 1279 Florida Ave. # 226. Tyndall Afb, FL 32403; 6) Transformer Isolation Qty 5, this item is a manufacture sole sourced to Eaton Co. 1000 Cherrington Parkway Moon Township, PA 15108. Complete details will be available in the solicitation., These items are manufacture sole source. Authorized distributers may submit a quote, which will be considered by the agency. Respond to Nikki Markota, by email to nikki.markota@navy.mil, fax to (760) 939-3095, or mail to Commander NAWCWD Code 254200D, Attn: Nikki Markota, 429 E Bowen Ave, MS 4015, China Lake, CA 93555-6108. Quotations are preferred via email.All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/.Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within FBO. See the DLIS website for registration details: http://www.dlis.dla.mil/jcp/.
N6893616T0331 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
Award Notice 1/1
8/11/16, 7:56 PM Zylon yarn with density of 1640 dtex.
The National Aeronautics and Space Administration (NASA) has issued a Special Notice seeking Zylon yarn with a specific density of 1640 dtex for procurement. The notice is associated with the NASA/NSSC (National Space and Science Center) and targets the acquisition of a specialized synthetic fiber material. The procurement is categorized under the Artificial and Synthetic Fibers and Filaments Manufacturing NAICS code 325220. The opportunity was posted on December 20, 2024, with a response deadline of December 26, 2024. NASA has preliminarily identified TEIJIN FRONTIER (U.S.A.), INC. as the potential sole source for this specific material.
The primary objective of this Special Notice is to determine whether the procurement should be conducted competitively, despite initially indicating a potential sole source approach. Contractors interested in this opportunity are invited to submit their capabilities and qualifications in writing by 4:00 p.m. Central Standard Time on 12/26/2024. The procurement will be conducted under FAR Parts 12 and 13 for commercial items and services, with performance located at NASA Langley Research Center. The Statement of Work requires the delivery of 90 kg of Zylon Poly-Benzobisoxazole (PBO) Yarn, with Material Certification Data Sheets required for each lot. Partial delivery of in-stock quantities is permitted, with a final delivery date of February 11, 2025. While no specific set-aside is indicated, contractors must carefully review the technical requirements and be prepared to provide detailed documentation demonstrating their capability to meet NASA's precise specifications.
80NSSC891706Q National Aeronautics and Space Administration
Special Notice 1/1
12/20/24, 4:09 PM Drum Heater Bands
1. ASA1120H3 Drum Heater Bands Qty 300
The Naval Air Warfare Center Weapons Division at China Lake, CA intends to procure on an other than full and open competitive basis this requirement. This requirement is sole sourced to ASA Sales, Inc., 2501 W 237 St Suite 122, Torrance, CA 90505 as they are direct replacements due to a unique proprietary design of having the capability of being the only flexible silicon heater bands rated to 475 degrees. This notice of intent is not a request for competitive proposals; however, any firm believing it can fulfill the requirement identified above may submit a written response to tatiana.walters-miha@navy.mil no later than 5 days after the date of publication of this notice, which shall be considered by the agency. The written response shall reference solicitation number N6893619Q0115 and provide a capability statement that clearly indicates the firm's experience, assets, background, and ability to perform the required work without compromising the quality, accuracy, reliability, and schedule.All responsible sources must be registered in the System for Award Management (SAM) database at the following website: https://www.sam.gov/portal/public/SAM/.
Written responses shall be submitted by e-mail to the point(s) of contact listed below or mailed to the Contracting Office Address listed below no later than 5 days from this notice date.
Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information within FBO. See the DLIS website for registration details: https://public.logisticsinformationservice.dla.mil/jcp/search.aspx
Going forward, all new entities registering in GSA's System for Award Management (SAM), as well as existing registrations being updated or renewed, will require the submission of an original, signed notarized letter identifying the authorized Entity Administrator for the entity associated with the Data Universal Numbering System (DUNS) number. Effective June 11, 2018, entities who create or update their registration in SAM.gov to apply only for federal assistance opportunities such as grants, loans, and other financial assistance programs, have a notarized letter on file within 30 days of registration. Additionally, Effective June 29, 2018, all non-Federal entities who create or update their registration in SAM.gov, have a notarized letter on file within 30 days of registration. It is recommended that all interested parties be aware that processing this additional information may take several days and are proactive in maintaining the SAM registrations in an "Active" status as the government cannot award to an entity without an "Active" SAM registration. More information can be found at www.gsa.gov/samupdate.
N6893619Q0115 Department of the Navy Naval Air Systems Command Naval Air Warfare Center
Pre-Solicitation 1/1
1/17/19, 5:20 PM 3620--Composer 350 Filament Maker
Department of Veterans Affairs
Network Contracting Office 6 - Hampton
In Support of the Richmond VA Medical Center (RICHVAMC)
REQUEST FOR INFORMATION
The Hunter Holmes McGuire VA Medical Center is requesting a filament extruder, plastic Shredder, and polymer dryer.
PROJECT SCOPE:
The Contractor shall provide equipment, tools, materials, installation, training and repair (1 year) necessary for McGuire VA staff to operate Filament Extrusion System capable of recycling and producing filament in the following plastics: PLA, ABS, PC, PS, PETG, TPU, TPE, PPS, PVA, Bio PE, NEW PET and PA (6,12, 66).
Specific Tasks.
The Vendor will provide the following:
Filament Extruder
Pouch of practice PLA
Pouch of cleaning agent
Spool holder
Vibration device
Plastic Shredder
Polymer Dryer
Starter Kit
Cleaning agent
PLA granulates
HDPE granulates
Nozzle pack
Puller wheel
Spool holder
Spool
Vendor will provide 2 years of phone support and repair/replacement of these systems
Salient Features for the Filament extruder system:
Filament Extruder:
Minimum Max temperature of 350 °C
Band heater Ceramic with minimum 4 heating zones
Compatible materials PLA, ABS, PC, PS, PETG, TPU, TPE, PPS, PVA, Bio PE, NEW PET and PA (6,12, 66)
Output:
2 - 15 RPM
Filament diameter range 0.5 - 3 mm (0.02 - 0.12 inches)
Optical sensor accuracy 43 microns (1.69 mils)
Nozzle extruder Diameter 4 mm (0.16 inches) Replaceable
Power: 110-230V, 1300W max.
Minimum 2 liter input hopper size
Ability for Firmware updates, and Extrusion data analysis
Max size: 19.2 x 8.5 x 17.6 inches
Plastic Shredder
Power: 110-220V
Size: 21.7 x 12.2x 12.2 inches
Output:
5.2 kg of 2.85 PLA filament/hour
2-4 mm filter screen hole size
4mm regrind filter
Blades:
9 RPM
3 superior granulator knives (Replaceable)
Blade material: High carbon and chromium air hardened steel
Polymer Dryer
Power: 110-220V
5 liter volume
1 kg/3 hour (PA6) drying capacity
Temp control up to 160 deg C
compatible with granulates, flakes, and powders
Presets for standard materials
Stirring mechanism, adjustable airflow
Line
Description of Services
Estimated QTY
Unit
0001
Filament Maker in accordance with (IAW) the Statement of Work (SOW)
1
EA
0002
Plastic Shredder in accordance with (IAW) the Statement of Work (SOW)
1
EA
0003
Polymer Dryer in accordance with (IAW) the Statement of Work (SOW)
1
EA
0004
2 Year Support Plan in accordance with (IAW) the Statement of Work (SOW)
1
EA
0005
Starter Kit in accordance with (IAW) the Statement of Work (SOW)
1
EA
0006
Feeder for Extruder in accordance with (IAW) the Statement of Work (SOW)
1
EA
WARRANTY AND SUPPORT:
The warranty and support must cover all components of the requirement in accordance with standard manufacturer s warranty.DELIVERY LOCATION:
Richmond VA Medical Center
1201 Broad Rock Blvd.
Richmond, VA 23249
REQUESTED RESPONSES:
The intent of this Request for Information is to establish sources to define the procurement strategy (e.g set-aside, sole source, unrestricted) for a solicitation that VA intends to post soon. Interested contractors are requested to respond in accordance with the following:
Please respond to this RFI if you can provide supplies listed in the table in the background section above. Please provide details on the proposed EQUIVALENT products such as Manufacturer Name, Part Number, and Description.
If you have an existing GSA or VA, Federal Supply Schedule contract, please include the contract details in your response.
DISTRIBUTORS: You must provide proof that you are an authorized distributor. VA does not accept grey market items.
Please note that VA is particularly interested in determining the availability of Small Business Manufacturers. If your company is a small business manufacturer of potentially equivalent items, please respond to this RFI.
Vendors are requested to submit estimated market research pricing with their responses. The estimated pricing will be considered when determining the procurement strategy for the future solicitation. (e.g. if CO determines that capable small businesses cannot provide fair and reasonable pricing, then the solicitation will not be set-aside).
Please note that if no responses to this notice are received, from either authorized distributors of the cited brand name nor from manufacturers marketing a potentially equivalent brand, then this action will be sole sourced to the manufacturer cited in the Background section above.
CONTACT INFORMATION AND RESPONSE DUE DATE:
Please email all responses to Ronnie.Gregory@va.gov Please respond to this RFI no later than Tuesday, July 20, 2021 @ 12:00PM EST.
DISCLAIMER: This RFI is issued solely for informational and planning purposes and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Department of Veterans Affairs to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this RFI.
36C24621Q0985 Department of Veterans Affairs Veterans Health Administration Veterans Integrated Service Network 6
Pre-Solicitation 1/1
7/16/21, 10:14 AM