CGC cypress (WLB 210) FY2012 drydocking and repairs

The U.S. Coast Guard, Surface Force Logistics Command, IBCT, C&P2 will be issuing a solicitation for the FY12 Drydocking and Repairs of the CGC CYPRESS (WLB-210) whose home moorage is located in Pensacola, FL. The eventual contract will be performed at the contractor's certified drydock facility. This procurement will be a total small business set-side for all 336611 North America Industry Classification System code contractors. The period of performance will begin on 01 Feb 12 and complete 12 Apr 12. Only one contract will be awarded for this procurement. Foreseeable costs will be included in the price evaluation of offers.  This procurement is not geographically restricted. The proposed work items include but are not
limited to:

Hull Plating (Side Scan), Ultrasonic Testing
Hull Plating, U/W Body, Inspect
Appendages (U/W), Leak Test
Appendages (U/W) - Internal, Preserve
Voids (Non-Accessible), Leak Test
Chain Lockers, Inspect
Voids (Non-Accessible), Preserve Internal Surfaces
Propulsion Shaft Bearings (External), Check Clearances
Controllable Pitch Propellers, Clean and Inspect
Fathometer Transducer, General Maintenance
Duplex Strainers (All Sizes), Overhaul
Rudder Stock Bearings, Check Clearances
Thruster Units (General), Overhaul
Commissary Hoist, Service and Inspect
Pad Eyes, Inspect and Test
Crossdeck Winches, Overhaul
Mechanical Chain Stoppers, Overhaul
Anchor Windlass, Level 2 Inspect and Repair
Anchor Chain(s) and Ground Tackle, Inspect and Repair
Warping Capstan, Level 2 Inspect and Repair
Buoy and Cargo Handling Crane Wire Rope, Renew
Buoy Crane, Preserve
Tanks (Ballast), Preserve "100%"
Chain Locker, Preserve Partial
U/W Body, Preserve "100%"
U/W Body, Preserve "Partial - Condition A"
U/W Body, Preserve "Partial - Condition B"
U/W Body, Preserve "Partial - Condition C"
Cathodic Protection / Zincs, Renew
Impressed Current Cathodic Protection System, Inspect and Maintain
Drydocking
Temporary Services, Provide
Sea Trial Performance, Provide Support
Chain Lockers, Clean
Tanks (Dirty Oil and Waste), Clean
Tanks (MP Fuel Service), Clean
Tanks (MP Fuel Stowage and Overflow), Clean
Fwd Scan Sonar Transducer, General Maintenance
Sea Bay, Inspect
Sea Bay, Preserve 100%
Towing Bitts, Chocks, and Fairleads, Inspect and Test
Chain Locker, Preserve 100%
Impressed Current Cathodic Prot Sys Dielectric Shield (Capastic Fairing), Renew Propulsion Shafting Remove, Inspect, and Reinstall
Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renewal
Propulsion Tail Shaft Sleeve, Skim Cut
Propulsion Shaft Bearing, Stave Renewal
Controllable Pitch Propeller Hub, Remove and Reinstall
Stern Tube Interior Surfaces, Preserve 100%
Controllable Pitch Propeller, System Maintenance
Controllable Pitch Propeller, Hub General Maintenance
Propulsion Shaft Rope Guard, Renewal
Single Point Davit, Level 2 Inspect and Repair
Miscellaneous Tanks Vent and Overflow Piping, Renew
Main Mast, Preserve 100%
Bow and Stern Thruster Units, Shaft Renew & Tunnel Repair
Buoy Crane, Inspect and Repair
Tank Vent Cofferdams, Preserve
Hydraulic Inhaul Winch, Repair
RO Unit Foundation, Renew
Auxiliary Sea Water System Valves, Overhaul or Renew
Supply Ventilation Systems, Overhaul
Rudder, Inspect, Repair and Preserve
Composite Labor Rate
Laydays

A Request for Proposal (RFP) will be issued NLT 19 Oct 11. For further information concerning this acquisition, contact the POC identified on this Notice. Drawings on CD may be requested by emailing the Contracting Officer at james.altice@uscg.mil