Burlington Air National Guard Base, South Burlington, VT

Amendment 0008 and one attachment are posted.
Two attachments from Amendment 0004 are also re-posted due to potential problems with the PDF files.
.

Amendment 0008 and one attachment are posted.


Two attachments from Amendment 0004 are also re-posted due to potential problems with the PDF files. 

Amend 0004.

Amend 0004

This solicitation is now posted. All documents are available for download.
As per the solicitation, a site visit will be held on 5/10..

This solicitation is now posted. All documents are available for download. 


As per the solicitation, a site visit will be held on 5/10.

The U.S. Army Corps of Engineers, New England District, is planning to issue an Invitation for Bid for the renovation of aircraft facilities at the Burlington Air National Guard Base located in South Burlington, VT. This procurement will be unrestricted. The NAICS code for the work is 236220. The construction will extend over approximately 16 months. The estimated construction cost is between $30,000,000 and $40,000,000. Any responsible source meeting this standard may submit a bid to be considered by the New England District.

The Contractor shall provide all supervision, plant, labor, materials, tools and equipment, to carry out all work and operations as necessary. The work involves five aircraft support facilities which include three aircraft shelter buildings, one corrosion control facility, and one weapons facility. All of these buildings are existing and currently support F16 Fighting Falcon operations. They are being renovated in order to support current F16 and future F35 Joint Strike Fighter missions. Construction generally includes, but is not limited to, the following elements:

• 4 Bay, 8 position Aircraft Shelter Building
o Adding eight vertical lift fabric hangar doors
o New rigid insulation/EPDM roof
o Add Pre-Conditioned Air units mounted on roof top and providing pre-conditioned air to each aircraft position
o New insulated metal wall panels
o Add roof fall protection anchor point(s)
o Add concrete foundation
o Add steel superstructure
o New natural gas underground piping and radiant heat
o Add compressed air system
o New electrical service
o Add lightning protection system
o Modification of low level high expansion foam fire suppression system

• 1 Bay, 1 position Aircraft Shelter Building
o Add Pre-Conditioned Air unit mounted on roof top, providing pre-conditioned air to each aircraft position
o Add roof access ladder
o Add roof fall protection anchor point(s)
o Add compressed air system
o Modified electrical service

• 1 Bay, 1 position Aircraft Alert Shelter
o Add Pre-Conditioned Air unit mounted on roof top, providing pre-conditioned air to each aircraft position
o Add roof access ladder
o Add roof fall protection anchor point(s)
o Add compressed air system
o New rigid insulation/EPDM roof
o New insulated metal wall panels
o New water supply for humidification system
o New natural gas piping and building heat
o Modified electrical service

• Corrosion Control, Propulsion Maintenance, Inspection, and Maintenance Building
o Primarily interior renovations to reconfigure spaces for new aircraft support requirements
o Shop area wall/stair/ramp reconfigurations
o Common area (classroom, ready room, kitchenette, toilet/shower rooms) alterations
o Minor exterior wall demolition to enlarge overhead doors
o New exterior window and personnel doors
o New EPDM roof system

• Weapons System Maintenance Building
o Primarily interior renovations to reconfigure spaces for new aircraft support requirements
o New toilet/locker/shower area
o New office suites
o New break room
o New ready room, computer room, and classroom
o New electrical rooms
o New interior roof access ladder
o New exterior doors, frames, and windows
o New insulated metal wall panels and CMU veneer wainscot
o New standing seam metal roof
o Reconditioned vertical lift fabric doors
o Demolition and relocation of some exterior canopies

All work shall be completed in accordance with all federal, state, and local laws and regulations.

This is NOT a request for proposals at this time, the solicitation requirements and contract documents to include instructions for submission and the response date will be available on or about May 1, 2018. Neither telephonic, mailed nor faxed requests for hard copies of this solicitation will be accepted. The solicitation will only be available online; in order to download the solicitation, offerors must access the Federal Business Opportunities website (www.fbo.gov). All responsible sources may submit a bid which shall be considered by the New England District. Additional questions may be emailed to the Contract Specialist at Alysha.Macdonald@usace.army.mil.

.

The U.S. Army Corps of Engineers, New England District, is planning to issue an Invitation for Bid for the renovation of aircraft facilities at the Burlington Air National Guard Base located in South Burlington, VT. This procurement will be unrestricted. The NAICS code for the work is 236220. The construction will extend over approximately 16 months. The estimated construction cost is between $30,000,000 and $40,000,000. Any responsible source meeting this standard may submit a bid to be considered by the New England District.

The Contractor shall provide all supervision, plant, labor, materials, tools and equipment, to carry out all work and operations as necessary. The work involves five aircraft support facilities which include three aircraft shelter buildings, one corrosion control facility, and one weapons facility. All of these buildings are existing and currently support F16 Fighting Falcon operations. They are being renovated in order to support current F16 and future F35 Joint Strike Fighter missions. Construction generally includes, but is not limited to, the following elements:

• 4 Bay, 8 position Aircraft Shelter Building
     o Adding eight vertical lift fabric hangar doors
     o New rigid insulation/EPDM roof
     o Add Pre-Conditioned Air units mounted on roof top and providing pre-conditioned air to each aircraft position
     o New insulated metal wall panels
     o Add roof fall protection anchor point(s)
     o Add concrete foundation
     o Add steel superstructure
     o New natural gas underground piping and radiant heat
     o Add compressed air system
     o New electrical service
     o Add lightning protection system
     o Modification of low level high expansion foam fire suppression system

• 1 Bay, 1 position Aircraft Shelter Building
     o Add Pre-Conditioned Air unit mounted on roof top, providing pre-conditioned air to each aircraft position
     o Add roof access ladder
     o Add roof fall protection anchor point(s)
     o Add compressed air system
     o Modified electrical service

• 1 Bay, 1 position Aircraft Alert Shelter
     o Add Pre-Conditioned Air unit mounted on roof top, providing pre-conditioned air to each aircraft position
     o Add roof access ladder
     o Add roof fall protection anchor point(s)
     o Add compressed air system
     o New rigid insulation/EPDM roof
     o New insulated metal wall panels
     o New water supply for humidification system
     o New natural gas piping and building heat
     o Modified electrical service

• Corrosion Control, Propulsion Maintenance, Inspection, and Maintenance Building
     o Primarily interior renovations to reconfigure spaces for new aircraft support           requirements
     o Shop area wall/stair/ramp reconfigurations
     o Common area (classroom, ready room, kitchenette, toilet/shower rooms) alterations
     o Minor exterior wall demolition to enlarge overhead doors
     o New exterior window and personnel doors
     o New EPDM roof system

• Weapons System Maintenance Building
     o Primarily interior renovations to reconfigure spaces for new aircraft support requirements
     o New toilet/locker/shower area
     o New office suites
     o New break room
     o New ready room, computer room, and classroom
     o New electrical rooms
     o New interior roof access ladder
     o New exterior doors, frames, and windows
     o New insulated metal wall panels and CMU veneer wainscot
     o New standing seam metal roof
     o Reconditioned vertical lift fabric doors
     o Demolition and relocation of some exterior canopies

All work shall be completed in accordance with all federal, state, and local laws and regulations.

This is NOT a request for proposals at this time, the solicitation requirements and contract documents to include instructions for submission and the response date will be available on or about May 1, 2018. Neither telephonic, mailed nor faxed requests for hard copies of this solicitation will be accepted. The solicitation will only be available online; in order to download the solicitation, offerors must access the Federal Business Opportunities website (www.fbo.gov). All responsible sources may submit a bid which shall be considered by the New England District. Additional questions may be emailed to the Contract Specialist at Alysha.Macdonald@usace.army.mil.