W912QR20B0012_SID-0002.pdf

PDF 3 MB Posted

Attached to
new maintenance hangar for HC-130J located at Patrick AFB, Florida
Solicitation number
W912QR20B0012
Issued by

About this file

This solicitation is for the construction of a new HC-130J maintenance hangar at Patrick Air Force Base in Florida. The project has an estimated construction cost between $10-25 million and is classified under NAICS code 236220. As a full and open procurement requiring compliance with FAR provisions, it will utilize the HUBZone 10% price evaluation preference in accordance with FAR 19.1307. Interested offerors must register with SAM, which combines the former CCR and ORCA systems, and comply with the associated registration requirements referenced in the solicitation. Funds are presently unavailable and no contract award will be made until appropriated monies are released for the acquisition. The solicitation was issued by the Department of the Army Corps of Engineers Louisville District for the construction work.

View the file

Other files

Show all 20

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Solicitation For HC-130J General Maintenance Hangar Patrick AFB, FL

P2: 472236

Design-Bid-Build

Structural Interior Design (SID)

Certified Final Submittal

06 August 2020

W912QR20B0012-0002

ARIMS: 200A

Disposition: Maintain for 15yrs after construction

W912QR20B0012_SID-0002

PA

TR

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

STRUCTURAL INTERIOR DESIGN - CERTIFIED FINAL -

AMENDMENT 0002

NOTE: Contractors are free to use any product which meets the government’s minimum requirements and not in conflict with other contract provisions. Unless indicated otherwise on the plans or specifications (e.g. sole-source), all listed manufacturers are the basis of design. For these basis of design products, other manu-facturers may be substituted as long as the standard of quality and characteristics of the substituted manufacturer meet or exceed the standard of quality and characteristics of the basis of design.

SID Narrative

Construction Materials and Finishes Narrative

Structural Interior Design (SID)

The finishes and color palette has been selected to provide a low maintenance and clean design aesthetic.

A neutral color palette with limited color accents will provide a timeless palette.

All finishes shall be durable and require low maintenance for appearance retention. Colors, patterns, and textures shall be incorporated which successfully mask minor abrasions and day-to-day soiling between cleaning. Finishes shall be easily repairable if and when necessary.

The administrative areas will have sealed/hardened concrete floors. This will provide a durable, long lasting finish with little to no maintenance. A resinous coating flooring will be used in restrooms, locker rooms and shower rooms. A seamless floor and continuous wall base will reduce maintenance often associated with tile grout. Shower walls shall be solid surface and shower ceilings shall be epoxy paint on moisture resistant gyp, instead of wall tile to eliminate grout and maintenance. Restroom and locker room walls will be painted

CMU.

Selected finishes will incorporate Guiding Principles for Sustainable Federal Buildings and Associated Instructions criteria. Finishes will be selected with low VOC adhesives and paint finishes, walk off mats for increased indoor air quality, and other environmentally sensitive features and benefits.

Interior signage will be provided to aid in way-finding throughout the facility and as required by code. Room signage will be ADA compliant. Office room signage will have changeable text signs for future flexibility. All signage will be designed to meet the Air Force Sign Standard and the Patrick Air Force Base Installation Facilities Standards (IFS).

The new facility’s finishes shall comply with the Patrick Air Force Base Installation Facilities Standards (IFS).

The Exterior finishes shall be as follows:

Exterior Walls

Flush Pre-finished Metal Wall Panels (hangar bay, sliding hangar door and lean-to structure)

Roof Steel Standing Seam Metal Roofing –pre-finished structural standing seam, low slope roof. Color – Terra Cotta

Doors and Windows Personnel Doors –Galvanized Hollow Metal – color - Black Overhead Doors – color – Painted (Base Standard) Conch

Shell Window Frames – Aluminum – color, Black Anodized Window Glazing – Insulated low-e w/ laminated inside pane, color - Solar Gray.

Louvers Color to match adjacent wall color

Miscellaneous Fascia/Roof Trim– Color - Terra Cotta Gutters/Downspouts/Conductors – Color -Black

SID Narrative

The Interior finishes shall be as follows:

Hangar Bay Hangar Floor: Sealed/Hardened Concrete .

Walls: Painted CMU, pre-finished metal liner panel, color white

Ceiling: Exposed Structure, epoxy painted, structural steel epoxy painted.

Shops Floor: Concrete Sealer/Hardener Walls: Painted CMU

Ceiling: Exposed Structure, painted

Tool Room Floor: Concrete Sealer/Hardener

Ceiling: Acoustical Ceiling Tile, 2x2

Ready Room / Bull Pens / Conference Room Floor: Concrete Sealer / Hardener Base: Resilient Base

Walls: Painted CMU, Painted Gypsum Board Ceiling: Acoustical Ceiling Tile, 2x2

Toilet, Showers and Lockers Floor: Seamless Resinous Flooring

Base: Seamless Resinous Base Walls: Ceramic Tile Wainscot with Epoxy Painted CMU.

Ceiling: Epoxy Painted Gypsum Board

Building Utility Areas Floor: Sealed Concrete

Ceiling: Exposed Structure, painted

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

STANDING SEAM METAL ROOF

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: MANUFACTURER STANDARD “DARK RED” COLOR

MATCH TO PATRICK AFB TERRA COTTA BASE STANDARD.

EXTERIOR EAVE TRIM, FACIA

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: MANUFACTURER STANDARD “DARK RED” COLOR MATCH TO PATRICK AFB

TERRA COTTA BASE STANDARD.

GUTTERS AND DOWNSPOUTS

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: MANUFACTURER BEST MATCH TO BLACK

*NOTE: PHYSICAL SAMPLE NOT AVAILABLE

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

TRANSLUCENT PANELS

MANUFACTURER: KALWALL

PRODUCT / STYLE: FRP

COLOR: CRYSTAL

TRANSLUCENT PANEL FRAME

MANUFACTURER: KALWALL

PRODUCT / STYLE: CORROSIAN RESISTANT (KCRF) ORGANIC COATED FINISH

COLOR: BLACK

*NOTE: PHYSICAL SAMPLE NOT AVAILABLE

KALWALL INSTALLATION IMAGE

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

MP-1, MP-2

DESCRIPTION: METAL PANELS

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: MANUFACTURER STANDARD BEST MATCH TO PATRICK AFB CONCH

SHELL BASE STANDARD.

OVERHEAD DOORS

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: MANUFACTURER STANDARD BEST MATCH TO PATRICK AFB CONCH

SHELL BASE STANDARD.

WINDOWS

DESCRIPTION: FRAMES

MANUFACTURER: N/A

PRODUCT / STYLE: ANODIZED ALUMINUM

COLOR: BLACK

PE-7

DESCRIPTION: EPOXY PAINT

MANUFACTURER: N/A

PRODUCT / STYLE: N/A

COLOR: COLOR MATCH TO PATRICK AFB CONCH SHELL BASE STANDARD.

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

GLASS GLAZING

MANUFACTURER: VITRO GLASS

PRODUCT / STYLE: SOLARBAN 60

COLOR: SOLARGRAY

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DAPA- 1/PE-1

DESCRIPTION: LATEX /EPOXY PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX/EPOXY

COLOR: AGREEABLE GRAY SW7029

PA- 3

DESCRIPTION: LATEX PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX

COLOR: PEWTER CAST SW7673

PA- 4

DESCRIPTION: LATEX PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX

COLOR: PEPPERCORN SW7674

PA- 5/PE-5

DESCRIPTION: LATEX/EPOXY PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX/EPOXY

COLOR: PURE WHITE SW7005

PA- 2

DESCRIPTION: LATEX PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX

COLOR: WHIRLPOOL SW9135

PA- 6

DESCRIPTION: LATEX PAINT

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: LATEX

COLOR: TRICORN BLACK SW6258

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

EF-1

DESCRIPTION: FLOOR SYSTEM

MANUFACTURER: SHERWIN WILLIAMS

PRODUCT / STYLE: DECORATIVE MOSAIC RESINOUS FLOORING

MATRIX COLORS: (@ 1/8” Chip Size)

SW6229 @ 17%

SW7673 @ 40%

SW7674 @ 24%

SW7005 @ 19%

RB- 1

DESCRIPTION: RESILIENT BASE

MANUFACTURER: JOHNSONITE

PRODUCT / STYLE: BASEWORKS 4” X 120’

COLOR: 55 SILVER GREY

FRP-1

DESCRIPTION: WALL PROTECTION

MANUFACTURER: PANOLAM

PRODUCT / STYLE: FIBERGLASS REINFORCED PLAS-

TIC

COLOR: WHITE

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

GR- 1

DESCRIPTION: EPOXY/LATEX GROUT

MANUFACTURER: TEC

PRODUCT / STYLE: POWERGROUT

COLOR: 949 SILVERADO

TLC- 1/TLC-3

DESCRIPTION: CERAMIC WALL TILE

MANUFACTURER: DALTILE

PRODUCT / STYLE: NATURAL HUES

COLOR: QH83 LACE, MATTE

TLC- 2

DESCRIPTION: CERAMIC WALL TILE

MANUFACTURER: DALTILE

PRODUCT / STYLE: NATURAL HUES

COLOR: QH08 CINDER, MATTE

WOM-1

DESCRIPTION: WALK-OFF MAT

MANUFACTURER: CONSTRUCTION SPECIALTIES

PRODUCT / STYLE: M1 WITH MONOTUFT HD

COLOR: PEWTER 9321

MT - 1

DESCRIPTION: METAL EDGE TRIM

MANUFACTURER: SCHLUTER

PRODUCT / STYLE: JOLLY A80AT

COLOR: SATIN NICKEL ANODIZED ALUMINUM

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

PLAM- 1

DESCRIPTION: HIGH-PRESSURE LAMI-

NATE MANUFACTURER: WILSONART

PRODUCT / STYLE: 4878-38

COLOR: PEWTER MESH

TC-1

DESCRIPTION: TOILET PARTITIONS

MANUFACTURER: GLOBAL PARTITIONS

PRODUCT / STYLE: SATIN #4

COLOR: STAINLESS STEEL

RS-1

DESCRIPTION: ROLLING SHADES

MANUFACTURER: MECHOSHADE

PRODUCT / STYLE: 600 SERIES, 3% OPEN

COLOR: 6006 SILVER BIRCH

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

SSF-2

DESCRIPTION: SOLID SURFACE

MANUFACTURER: SWAN SURFACES, LLC

PRODUCT / STYLE: BATH WALL PANELS

COLOR: ARCTIC GRANITE 035

CG-1

DESCRIPTION: CORNER GUARD

MANUFACTURER: CONSTRUCTION SPECIALTIES

PRODUCT / STYLE:

COLOR: #262 DRIFTWOOD, SUEDE TEXTURE

SSF-1

DESCRIPTION: SOLID SURFACE

MANUFACTURER: DUPONT

PRODUCT / STYLE: CORIAN

COLOR: LAVA ROCK

IC

K

- H C

0J

H

AN

G

AR

AI

R

FO

RC

E

BA

SE

, C

O

CO

A

BE

AC

H, F

LO

RI

DA

ACT- 1

DESCRIPTION: ACT OFFICE 24” X 24” BEVELED TEGULAR

MANUFACTURER: ARMSTRONG

PRODUCT / STYLE: ULTIMA 1911

COLOR: WHITE

ML-1

DESCRIPTION: METAL LOCKER FINISH

MANUFACTURER: LYON WORKSPACE PRODUCTS

PRODUCT / STYLE: N/A

COLOR: GREEN BLUE 5001-3E

File details come from the government source that posted it. Updated .