W912P5-16-R-0002-0007.pdf

CONTRACTING DIVISION (JD9)

JAMIE.DAVIES@USACE.ARMY.MIL

(615) 736-7921

(615) 736-7124

NASHVILLE TN 37202-1070

W38XDD50719840

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this modification is to:

1. Revise the technical specifications and

2. Update clauses 52.252-3 and 252.236-7001.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 9

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 24-Aug-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912P5-16-R-0002

X 9B. DATED (SEE ITEM 11)

06-May-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

24-Aug-2016

CODE

US ARMY CORPS OF ENGINEERS-CELRN-RC-N

DIRECTORATE OF CONTRACTING

110 9TH AVENUE SOUTH, ROOM A680

NASHVILLE TN 37202-1070

W912P5 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE W912P5

FACILITY CODECODE

EMAIL:TEL:

W912P5-16-R-0002

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

AMEND 0007 TECHNICAL CHANGES

RFP No. W912P5-16-R-0002 Amendment No. 0007 Unit 4 Rehabilitation

Old Hickory Powerhouse Sumner County, Tennessee

I. CHANGES TO TECHNICAL SPECIFICATIONS

A. Section 48 13 16.00 GENERATOR REWIND AND REFURBISHMENT

1. Remove Section 48 13 16.00 pages 23 and 24, and replace with revised Section 48 13 16 00 pages 23 and 24.

--- END OF AMENDMENT NO. 0007 TECHNICAL CHANGES---

SECTION 00100 - BIDDING SCHEDULE/INSTRUCTIONS TO BIDDERS

The following have been modified:

52.252-3 ALTERATIONS IN SOLICITATION (APR 1984)

Portions of this solicitation are altered as follows:

Amendment 0001: The purpose of this amendment is to:

1. Change the site visit date;

2. Answer questions regarding the site visit;

3. Revise 52.252-3; and

4. Revise 52.236-27 Alt I

Amendment 0002: The purpose of this amendment is to:

1. Update Specifications (Sections 01 11 10, 26 11 15.00, 48 13 16.00, and Appendix A)

2. Replace drawings (Q15-79/1021 and Q15-79/1022)

3. Add drawings (Q15-79/772, 162D132, 162D598, and T-5139635)

4. Post Set Two Q&A

5. Change Section 00115, 2.2.2.1 Subfactor 3A "42,000 kVA" changed to "45,000 kVA"

6. Update clauses 52.252-3 and 252.236-7001.

Amendment 0003: The purpose of the amendment is to:

1.Post Set Three Q&A and

2. Update FAR Clause 52.252-3.

Amendment 0004: The purpose of this amendment is to:

1.Post Set Four Q&A and

2. Update FAR Clause 52.252-3.

Amendment 0005: The purpose of this amendment is to:

1. Post Set Five Q&A,

2. Replace all references of "00010" with "00100"; Revise Section 00115, Paragraph 2.3; and Revise Section 00130, Paragraphs 4.1, 4.6 and 4.7;

3. Revise Technical Specifications;

4. Update Price Schedule and Price Schedule Information;

5. Include PDF editable version of PPQ;

6. FAR clause 52.209-7 made full text;

7. Revise DFARS clause 252.236-7001 and FAR clause52.252-3; and

8. Change proposal due date to August 31, 2016 at 1:00 PM CDT.

Amendment 0006: The purpose of this amendment is to:

1. Post Set Six Q&A;

2. Revise Price Schedule;

3. Update/Add drawings;

4. Update technical specifications;

5. Add Paragraph 6, Failure to Meet Performance Guarantees in Special Instructions;

6. Section 00115 Proposal Content Paragraph 2.1.1: Update similar in magnitude language;

7. Section 00115 Paragraph 2.2.3.1 and 00130 Paragraph 4.4.1: Add joint venture language;

8. Update Section 00130 Paragraph 4.7;

9. Add "Building" wage determination; and

10. Update clauses 52.252-3 and 252.236-7001.

Amendment 0007: The purpose of this modification is to:

1. Revise the technical specifications and

2. Update clauses 52.252-3 and 252.236-7001.

(End of Provision)

SECTION 00700 - CONTRACT CLAUSES

The following have been modified:

252.236-7001 CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)

(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.

(b) The Contractor shall--

(1) Check all drawings furnished immediately upon receipt;

(2) Compare all drawings and verify the figures before laying out the work;

(3) Promptly notify the Contracting Officer of any discrepancies;

(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and

(5) Reproduce and print contract drawings and specifications as needed.

(c) In general--

(1) Large-scale drawings shall govern small-scale drawings; and

(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.

(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.

(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:

Technical Specifications: W912P5-16-R-0002 TSpecs.pdf W912P5-16-R-0002TSpecsAm2Pages.pdf

W912P5-16-R-0002TSpecsAm5Pages.pdf W912P5-16-R-0002TSpecsAm6Pages.pdf W912P5-16-R-0002TSpecsAm7Pages.pdf

Drawings: W912P5-16-R-0002 Contract Drawings D Size.pdf W912P5-16-R-0002 Reference Dwgs.pdf W912P5-16-R-0002RefDrawsAm2Sheets.pdf W912P5-16-R-0002Cont DrawsAm2Sheets.pdf W912P5-16-R-0002RefDrawsAm6Sheets.pdf W912P5-16-R-0002Cont DrawsAm6Sheets.pdf

Appendix A: W912P5-16-R-0002 AppA.pdf

Reference Document: GeneratorCommissioningReport-1957.pdf

Drawing Number Description

Q15-79/1020 PROJECT LOCATION AND VICINITY MAP

Q15-79/1021 DRAWING INDEX - SHEET 1

Q15-79/1022 DRAWING INDEX - SHEET 2

Q15-79/1023 MECHANICAL GENERAL NOTES AND LEGEND

Q15-79/1023.1 ELECTRICAL GENERAL NOTES AND LEGEND

Q15-79/1024 LOCATION OF CONTRACTOR OUTSIDE TRAILERS AND STORAGE

Q15-79/1025 HIGH PRESSURE LIFT SYSTEM PLAN VIEW

Q15-79/1026 HIGH PRESSURE LIFT SYSTEM EQUIPMENT DETAILS

Q15-79/1027 HIGH PRESSURE LIFT SYSTEM THRUST TUB SECTION

Q15-79/1028.1 HIGH PRESSURE LIFT SYSTEM HYDRAULIC SCHEMATIC SHEET 1

Q15-79/1028.2 HIGH PRESSURE LIFT SYSTEM HYDRAULIC SCHEMATIC SHEET 2

Q15-79/1029 BLADE LINKAGE MODIFICATION - LINK PIN & KEY DETAILS

Q15-79/1030 BLADE LINKAGE MODIFICATION - EYE END DETAILS

Q15-79/1031 BLADE LINKAGE MODIFICATION - LINK BARS, STUD BOLT & STUD SLEEVE

DETAILS

Q15-79/1032 BLADE LINKAGE MODIFICATION - BLADE LINKAGE ASSEMBLY DETAILS

Q15-79/1033 DISCHARGE RING ANCHOR PATTERN

Q15-79/1034 DISCHARGE RING ANCHOR BAR SECTION

Q15-79/1035 TEMPLATE POSITIONING

Q15-79/1036 GENERATOR THRUST BEARING HIGH PRESSURE LIFT PUMP CONTROL

SCHEMATIC

Q15-79/1037 GENERATOR NEUTRAL GROUNDING EQUIPMENT REMOVAL DRAWING

Q15-79/1038 HIGH RESISTANCE GROUNDING NEW EQUIPMENT

Q15-79/1039 CONDUIT AND CABLE SCHEDULE

CUMBERLAND RIVER, OLD HICKORY POWER PLANT

DRAWING NUMBER INFORMATIONAL REFERENCE DRAWINGS

Q15-79/1 TITLE

Q15-79/2 INDEX - GENERAL, ARCHITECTURAL, STRUCTURAL

Q15-79/3 INDEX - STRUCTURAL

Q15-79/4.1 INDEX - MECHANICAL

Q15-79/11.2 INDEX - ELECTRICAL

Q15-79/16.3 GENERAL, LOCATION AND ACCESS PLAN

Q15-79/50.1 GENERAL, PLAN, SECTION AND DETAILS

Q15-79/52.2 EQUIPMENT TRANSVERSE SECTION

Q15-79/53.2 EQUIPMENT PLAN -ENTRANCE LEVEL, EL 447.0

Q15-79/54.3 EQUIPMENT PLAN - GENERATOR FLOOR, EL 428.0

Q15-79/55.1 EQUIPMENT PLAN - TURBINE FLOOR, EL 413.0

Q15-79/56.3 EQUIPMENT PLAN - CL OF DISTRIBUTOR AND ACCESS GALLERY

Q15-79/101.3 EQUIPMENT LONGITUDINAL SECTION

Q15-79/102.3 ARCHITECTURAL, ENTRANCE LEVEL - EL 447.0, PLAN OF SERVICE BAY

Q15-79/103.4 ARCHITECTURAL, ENTRANCE LEVEL - EL 447.0, PLAN OF UNITS 1 AND 2

Q15-79/104.2 ARCHITECTURAL, GENERATOR ROOM FLOOR - EL 428.0, PLAN OF SERVICE

BAY

Q15-79/105.1 ARCHITECTURAL, GENERATOR RM FLOOR - EL 428.0, PLAN OF UNITS 1 AND 2

Q15-79/106 ARCHITECTURAL, GENERATOR RM FLOOR - EL 428.0, PLAN OF UNITS 3 AND 4

Q15-79/107.2 ARCHITECTURAL, GENERATOR ROOM FLOOR - EL 413.0, PLAN OF SERVICE

BAY

Q15-79/108.3 ARCHITECTURAL, GENERATOR RM FLOOR - EL 413.0, PLAN OF UNITS 1 AND 2

Q15-79/510.2 PLANT ARCHITECTURAL, GENERATOR RM FLOOR - EL 4138.0, PLAN OF UNITS

3 AND 4

Q15-79/512.2 VALVE OPERATION DIAGRAM GOVERNOR AND LUBRICATING OIL

Q15-79/513.6ab MECHANICAL, VALVE OPERATION DIAGRAM, RAW WATER

Q15-79/520.3 MECHANICAL, VALVE OPERATION DIAGRAM, COMPRESSED AIR

Q15-79/521.3 MECHANICAL, PIPING ARRANGEMENTS AT UNITS, SHEET 1

Q15-79/522.3 MECHANICAL, PIPING ARRANGEMENTS AT UNITS, SHEET 2

Q15-79/533.2 MECHANICAL, PIPING ARRANGEMENTS AT UNITS, SHEET 3

Q15-79/534.3 MECHANICAL, GENERATOR COOLING WATER ARRANGEMENT, SHEET 1

Q15-79/535.4 MECHANICAL, GENERATOR COOLING WATER ARRANGEMENT, SHEET 2

Q15-79/536 MECHANICAL, GENERATOR COOLING WATER ARRANGEMENT, SHEET 3

Q15-79/537 MECHANICAL, GENERATOR COOLING WATER SYSTEM, GENERATOR AIR

COOLER - ASSBLY & DETAILS

Q15-79/538 MECHANICAL, THRUST BEARING OIL COOLER ASSEMBLY AND SECTIONS

Q15-79/701.2 MECHANICAL, GENERATOR COOLING WATER SYSTEM, GENERATOR AIR

COOLER - COOLER TUBE

Q15-79/713.4 ELECTRICAL, NEUTRAL REACTOR AND EXCITATION CUBICLE

Q15-79/750.14ab OUTLINE OF INSTRUMENT AND BENCH BOARD

Q15-79/753.8 CONNECTION DIAGRAM GENERATOR NO. 3 AND 4 AND TRANSFORMER 2

Q15-79/756.8ab ELECTRICAL, MAIN SINGLE LINE DIAGRAM Q15-79/757.10ab 125 VOLT DC SCHEMATIC DIAGRAM, SHEET 1 Q15-79/760.7ab 125 VOLT DC SCHEMATIC DIAGRAM, SHEET 2

Q15-79/763.4 DC SCHEMATIC AND ONE LINE DIAGRAM

Q15-79/766.10ab 440 VOLT AUXILIARY POWER SYSTEM SCHEMATIC, SHEET 1

Q15-79/767.13 ELECTRICAL, MISC. CONNECTION DIAGRAM, SHEET 2

Q15-79/769.6 DEVICE SCHEDULE, SHEET 1

Q15-79/770.4 DEVICE SCHEDULE, SHEET 2

Q15-79/772 STATOR WINDING DIAGRAM GENERATOR #2,3 & 4

Q15-79/806.6 CONDUIT AND GROUNDING GENERATOR NO. 4 AREA EL. 428.0

Q15-79/807.6 CONDUIT AND GROUNDING SECTIONS - EL. 428.0

Q15-79/808.5 CONDUIT AND GROUNDING GENERATOR HOUSING DETAILS

Q15-79/810.6 CONDUIT AND GROUNDING EQUIPMENT BAY EL. 428.0 - SHEET 2

Q15-79/818.17 CONDUIT AND GROUNDING UNIT 4 AREA EL. 413.0

Q15-79/819.6 CONDUIT AND GROUNDING DETAILS - EL. 413.0 SHEET 1

Q15-79/820.6 CONDUIT AND GROUNDING DETAILS - EL. 413.0 SHEET 2

Q15-79/828.7 CABLE ARRANGEMENT ON TRAYS PLAN AND SECTIONS - SHEET 2

Q15-79/852.1 GENERATOR ROOM LIGHTING PLANS, SECTIONS, AND DETAILS

Q15-79/860.3 TURBINE FLOOR EL. 413.0 UNIT 4 LIGHTING PLAN

Q15-79/862.8 GENERATOR AND TURBINE PIT LIGHTING PLANS

970839-4.N ACTUATOR WIRING DIAGRAM UNIT #4

CONT. BALDWIN - LIMA - HAMILTON REFERENCE DRAWINGS

DRAWING NUMBER TITLE

39100 DETAILS OF WICKET GATES

39107 DETAILS OF BOTTOM RING AND FACING PLATE

39110 PLAN OF CONCRETE CASING

39110-A ELEVATION OF CONCRETE CASING

39111 CONCRETE DRAFT TUBE PLAN AND ELEVATION

39111-A CONCRETE DRAFT TUBE DEVELOPMENT

39112 DETAIL OF PIER NOSE FOR DRAFT TUBE

39113 DETAILS OF DRAFT TUBE LINER

39114 DETAILS OF STAY RING PLAN

39114-A DETAILS OF STAY RING SECTIONAL ELEVATION

39115 DETAILS OF DISCHARGE RING

39115-A DETAILS OF DISCHARGE RING SECTIONS

39115-B FABRICATION DRAWING OF DISCHARGE RING

39115-C DETAILS OF FABRICATED DISCHARGE RING

39115-D DETAILS OF FABRICATED DISCHARGE RING

39115-E DETAILS OF FABRICATED DISCHARGE RING

39116 PLAN OF PIT LINER UPPER SECTION

39116-A PLAN OF PIT LINER LOWER SECTION

39116-B ELEVATIONS OF PIT LINER LOWER SECTION

39116-C ELEVATION OF PIT LINER UPPER SECTION

39117 METHOD OF SETTING STAY RING DISCHARGE RING AND DRAFT TUBE LINER

ELEVATION

39117-A METHOD OF SETTING STAY RING DISCHARGE RING AND DRAFT TUBE LINER

PLAN "A-A"

AND SECTION "B-B"

39117-B METHOD OF SETTING STAY RING DISCHARGE RING AND DRAFT LINER

SECTIONS "C-C" AND "D-D"

39118 35000HP TURBINE OLD HICKORY POWER PLANT USACE LIST OF DRAWINGS

39119 LAYOUT OF LEVER AND LINK MECHANISM

39120 RELATION BETWEEN WICKET GATES AND STAY VANE & WICKET GATE

OPENINGS

39121 RELATION BETWEEN WICKET GATES, GATE LEVER, SHEAR LEVER,

OPERATING RING AND GATE LINK

39122 DETAILS OF COUPLINGS, LEVERS, LINKS, PINS AND BUSHINGS

39123 DETAILS OF OPERATING RING

39123-A DETAILS OF OPERATING RING

39124 DETAILS OF HEAD COVER

39124-A FACING PLATE - BUSHINGS AND GLAND FOR OUTER HEAD COVER

39125 DETAILS OF WEARING STRIPS, FLOOR PLATES ETC. FOR INTERMEDIATE AND

INNER HEAD COVER

39126 PLAN OF INTERMEDIATE HEAD COVER

39126-A SECTIONAL ELEVATION AND SECTIONS OF INTERMEDIATE HEAD COVER

39127 DETAILS OF INNER HEAD COVER

39128 ARRANGEMENT OF MAIN GUIDE BEARING WIRING AND STUFFING BOX

PIPING

39129 DETAILS OF MAIN GUIDE BEARING HOUSING

39130 DETAILS OF MAIN GUIDE BEARING

39131 DETAILS OF MAIN GUIDE BEARING COVER AND OIL CATCHER

39132 DETAILS OF PACKING BOX LANTERN AND GLAND

39132-A DETAILS OF SEALING DEVICE FOR REPACKING BOX

39133 ARRANGEMENT OF SERVO MOTORS

39134 PIPING ARRANGEMENT FOR SERVO MOTORS

39135 DETAILS OF SERVOMOTOR CYLINDERS

39136 DETAILS OF CYLINDER HEAD, PISTON LOCKNUT, ETC.

39137 DETAILS OF PISTON RODS, REACH RODS, FORKED ROD ENDS, STOP NUT,

CONNECTING

ROD PINS, ETC.

39139 DETAILS AND ARRANGEMENT OF SUMP PUMPS AND PIPING

39140 PUMPS AND OIL PIPING FOR GUIDE BEARING LUBRICATION

39140-A OIL PIPING FOR GUIDE BEARING LUBRICATION

39141 ARRANGEMENT OF 12" AUTOMATIC AIR VALVE

39142 DETAILS OF VALVE BODY, DISCHARGE BODY VALVE DISC., DISC. SEAT,

BUSHING AND SPRING

FOR 12" AUTOMATIC AIR VALVE

39142-A DETAILS OF DASH POT, YOKE, SHAFT, BUSHINGS ETC. FOR 12" AUTOMATIC

AIR VALVE

39143 ARRANGEMENT AND DETAILS OF AIR VALVE PIPING

39144 MANUAL CENTRAL LUBRICATION SYSTEM SCHEMATIC

39144-A MANUAL CENTRAL LUBRICATION SYSTEM ELEVATION AND DETAILS

39145 DETAILS OF UNDERFRAME FOR FLOOR PLATES AROUND TURBINE PIT AND

MAIN SHAFT

39146 DETAILS OF FLOOR PLATES, HAND RAILING STANCHION

39147 DETAILS AND ARRANGEMENT 0F SUPPORT FUR RUNNER AND SHAFT

DURING ERECTION

39148 ARRANGEMENT AND DETAILS OF LIFTING DEVICE FOR INTERMEDIATE

SHAFT AND GUIDE BEARING

39149 ARRANGEMENT AND DETAILS OF STAIRWAY

39150 WRENCH BOARD

39152 RUNNER SECTIONAL ELEVATION

39153 PLAN OF TURBINE

39154 35,000 HP TURBINE, CUMBERLAND RIVER, OLD HICKORY POWER PLANT,

PLAN

VIEW OF POWERHOUSE

39154-A 35,000 HP TURBINE, CUMBERLAND RIVER, OLD HICKORY POWER PLANT.

SECTIONAL ELEVATION OF POWERHOUSE

39155 ARRANGEMENT OF STAIRWAY BRIDGES AND WALKWAYS TURBINE PIT

39155-A ARRANGEMENT AND DETAILS OF BRIDGE AND LADDER

39157 DETAILS OF FOUNDATION PLATE PEDESTAL FOR ASSEMBLING RUNNER

39158 SECTIONAL PLAN AND ELEVATION ADJUSTABLE BLADE RUNNER

39159 DETAILS OF INTERMEDIATE SHAFT

39160 DETAILS OF MAIN SHAFT

39161 FORGING DETAILS OF MAIN AND INTERMEDIATE SHAFTS

39162 DETAILS OF MAIN SHAFT SLEEVES AND NUT GUARD

39163 DETAILS OF RUNNER HUB

39164 DETAILS OF UPPER AND LOWER CONES FOR RUNNER

39165 DETAILS OF RUNNER BLADES

39165-A DETAILS OF CUTOUTS FOR RUNNER BLADE

39166 DETAILS OF PRE-WELDING RUNNER BLADES WITH STAINLESS STEEL

39167 METHOD OF CHIPPING RUNNER BLADE FOR WELDING STAINLESS STEEL

STRIPS

39168 DETAILS OF SEAL RINGS FOR RUNNER HUB

39169 DETAILS OF RETAINING RINGS FOR RUNNER HUB

39170 DETAILS OF LEVER, LINK, PIN, LOCK NUT, ET. FOR RUNNER

39171 DETAILS OF BUSHING IN RUNNER HUB

39172 DETAILS OF CROSSHEAD

39173 DETAILS OF PISTON ROD, PISTON, PISTON CAP, PIPE HEAD ETC.

39174 FORGING DETAILS OF PISTON ROD

39175 DETAILS OF OIL PIPES IN INTERMEDIATE AND GENERATOR SHAFT

39176 DETAILS OF GASKETS FOR RUNNER HUB

39177 ARRANGEMENT OF WIRING ON OIL HEAD SUPPORT

39178 ARRANGEMENT OF RUNNER BALANCING BLADE OPERATING AND BLADE

LOCKING DEVICES

39178-A DETAILS OF RUNNER BALANCING BLADE OPERATING AND BLADE LOCKING

DEVICES

39179 HYDROSTATIC TEST OF RUNNER HUB

39181 ARRANGEMENT OF GUARD, OIL CATCHER AROUND SHAFT AT SERVO

MOTOR

39182 DETAILS OF OIL CATCHER AND GUARD

39183 ARRANGEMENT AND DETAILS OIL CATCHER AND GUARD SUPPORT

39184 ARRANGEMENT OF OIL HEAD AND SUPPORT

39184-A PLAN OF OIL HEAD AND SUPPORT

39185 DETAILS OF OIL HEAD TOP

39186 DETAILS OF OIL HEAD SUPPORT

39187 OIL HEAD DETAILS

39188 DETAILS OF OIL HEAD SUPPORT

39188-A INSPECTION DOOR AND DETAILS FOR OIL HEAD SUPPORT

39189 LADDER WALKWAY AND HANDRAIL FOR OIL HEAD SUPPORT

39190 ARRANGEMENT AND DETAILS OF UNWATERING VALVE

39621 DIAPHRAGM BOX FOR HEAD COVER PRESSURE AND VACUUM GAUGE

39622 DETAILS OF PISTON ROD AND LOCKING DEVICE

39634 ARRANGEMENT OF WIRING AND CONDUIT FOR TEMPERATURE DETECTORS,

RELAYS AND MERCOID SWITCHES

39660 ARRANGEMENT OF GOVERNOR PIPING ON OIL HEAD

40027 DETAILS AND ASSEMBLY OF LIFTING RIG FOR PIPES IN MAIN SHAFT

40027-A DETAILS AND ASSEMBLY OF LIFTING RIG FOR PIPES IN MAIN SHAFT

40034 METHOD OF ERECTING RUNNER, SHAFT, INNER HEAD COVER, ETC.

41463 DETAIL AND ASSEMBLY OF HIGH LEVEL FLOAT SWITCH FOR OIL HEAD

41608 ARRANGEMENT OF GATE LOCKING DEVICE

41609 GATE LOCK HOUSING

41610 GATE LOCK DETAILS

41611 GATE LOCK DETAILS

GENERAL ELECTRIC REFERENCE DRAWINGS

DRAWING NUMBER TITLE

109C312 SURFACE AIR COOLER

109C377 BEARING OIL COOLER

161D619 BRAKE PIPING UNITS 2 & 4

161D221 PEDESTAL

162D132 WRENCH BOARD

162D321 YOKE (FOR GENERATOR ROTOR LIFTING DEVICE)

162D390 INSTRUMENTS IN BEARINGS, UNITS #2 AND #4

162D603 THERMOMETER

162D598 CO2 FIRE EXTINGUISHER PIPING

181C516 AIR COOLER PIPING DIAGRAM

182C573 RTD & ACCESSORIES UNITS 1 AND 3

182C674 DOOR AND FRAME

182C801 LIFTING DEVICE (FOR GENERATOR ROTOR)

209B315 LIST OF MATERIAL

214B204 FLOWMETER PIPING ARRANGEMENT

266A147 ADJUSTABLE TEMP. SWITCH

528E274 PIPING DIAGRAM SCHEMATIC

528E516 OUTLINE HYDRAULIC TURBINE DRIVEN GENERATOR OLD HICKORY POWER

PLANT

528E565 AIR COOLER PIPING

528E588 STATOR COIL DIAGRAM OLD HICKORY UNIT 4

528E637 INSTRUMENTS & ACCESSORIES CONDUIT CONNECTIONS SHEET 1

528E637 INSTRUMENTS & ACCESSORIES CONDUIT CONNECTIONS SHEET 2

528E565 AIR COOLER PIPING

528E576 STATOR CONNECTIONS

528E679 ASSEMBLY HYDRAULIC TURBINE DRIVEN GENERATOR OLD HICKORY

POWER PLANT

528E594 PIPING PLAN, UNIT 4

T-5139635 HANDLING OF GENERATOR PARTS

T-5139659 TERMINAL BOARD ARRANGEMENT

WOODWARD GOVERNOR REFERENCE DRAWINGS

DRAWING NUMBER TITLE

970839-SHT-1 WIRING DIAGRAM FOR UNITS #1 THROUGH #4

970839-SHT-2 WIRING DIAGRAM FOR UNITS #1 THROUGH #4

982408-SHT-2 ACUATOR ARRANGEMENT FOR UNITS #1 THROUGH #4

(End of clause)

(End of Summary of Changes)