Troopcamp Addendum 2.doc

REPLACE TROOP TRAINING QUARTERS

193d Regional Support Group Pennsylvania Air National Guard

Ft. Indiantown Gap, Annville, Pennsylvania

Project No. LKLW959714

ADDENDUM #2

REVISIONS TO SPECIFICATIONS

· Section 02820 – ALUMINUM LOUVER FENCING

1) ADD attached section 02820 in its entirety.

· Section 04720 – CAST STONE

1) ADD attached section 04720 in its entirety.

· Section 08410 – METAL-FRAMED STOREFRONTS

1) REVISE paragraph 2.02.C.1 as follows:

1. Thickness 45 mm (1-3/4 inches)

· Section 08800 – GLAZING

1) REVISE paragraph 2.01.A.5 as follows:

5. Thickness 33 mm (1-5/16 inches)

· Section 09212 – SPRAY-ON ACOUSTIC FINISH

1) REVISE paragraph 2.01.A as follows:

A. International Cellulose Corporation, SonaSpray “fc”

· Section 13100 – LIGHTNING PROTECTION

1) REVISE paragraph 2.01.A.6 as follows:

6. National Lightning Protection Corporation

2) ADD paragraph 2.01.A.7 as follows:

7. Or Approved Equal

· Section 16140 – WIRING DEVICES

1) REVISE article 2.01.E as follows:

E. Colors of wiring devices to be selected from the Manufacturer’s standard color range by the Government during shop drawing review. The Manufacturer’s standard color ranges shall include, at minimum: white, black, ivory, and gray.

2) ADD article 2.01.F as follows:

F.

Acceptable Manufacturers:

1. Hubbell Inc.

2. Pass & Seymour

3. Leviton Manufacturing Co.

· Section 16711 – TELECOMMUNICATIONS

1) REPLACE Section 16711 with the attached Section 16711 in its entirety.

REVISIONS TO DRAWINGS

· C001 – GENERAL SITE INFORMATION PLAN

1) ADD information on SK-C1 related to the existing communications ductbank to Area 1 Project Location Plan.

· C102 – LAYOUT PLAN

1) REVISE 3.04M [10’] R curb at parking lot entry island (southwest corner near centerline coordinate 4) to 3.96M [13’] R.

2) ADD Dumpster Enclosure and Pad information as shown on SK-C2.

· C103 – GRADING AND DRAINAGE PLAN

1) REVISE elevation of Propane Tank Pad to 447.75’.

2) ADD Dumpster Enclosure Pad information as shown on SK-C2.

· C505 - DETAILS

1) ADD details related to Dumpster Pad and Site Work as shown on SK-C3.

· A101 – FIRST FLOOR PLANS AND DETAILS

1) REVISE ceiling type F to read as follows:

TYPE F 600x600 [24”x24”] ACOUSTIC CEILING TILE WITH 24mm [15/16”] EXPOSED TEE GRID.

· A102 – SECOND FLOOR PLANS AND DETAILS

1) REVISE ceiling type A to read as follows:

TYPE A 600x600 [24”x24”] BEVELED TEGULAR ACOUSTIC CEILING TILE WITH 16mm [9/16”] EXPOSED TEE GRID. PROVIDE 16mm [5/8”] FIRE RATED GYPSUM BOARD AT UNDERSIDE OF TRUSSES AT STAIR A AND STAIR B.

2) REVISE ceiling type F to read as follows:

TYPE F 600x600 [24”x24”] ACOUSTIC CEILING TILE WITH 24mm [15/16”] EXPOSED TEE GRID.

· A103 – ROOF PLANS AND DETAILS

1) ADD plan, elevations, detail, and section as shown on SK-A1 and SK-A2.

· E001 – SYMBOLS, ABBREVIATIONS AND GENERAL NOTES

1) REPLACE drawing E001 with attached drawing E001 in its entirety.

· E102 – LIGHTING SECOND FLOOR PLAN

1) REPLACE drawing E102 with attached drawing E102 in its entirety.

· E107 – TELECOMMUNICATION FIRST FLOOR PLAN

1) REPLACE drawing E107 with attached drawing E107 in its entirety.

· E108 – TELECOMMUNICATION SECOND FLOOR PLAN

1) REPLACE drawing E108 with attached drawing E108 in its entirety.

· E601 – SCHEDULES

1) REPLACE drawing E601 with attached drawing E601 in its entirety.

· E602 – DIAGRAMS AND DETAILS

1) REPLACE drawing E602 with attached drawing E602 in its entirety.

· E604 – SCHEDULES

1) REPLACE drawing E604 with attached drawing E604 in its entirety.