Appendix_A_Furniture,_Fixtures,_and_Equipment_(FFE).pdf
PDF 3 MB Posted
- Solicitation number
- W912ER-19-R-0001
About this file
2. Appendix A Furniture, Fixtures, and Equipment (FFE)
View the file
Other files
Show all 28
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Appendix A:
Furniture, Fixtures, and
Equipment (FFE) Large Aircraft Maintenance Hangar Al Dhafra Air Base, United Arab Emirates
U.S. Army Corps of Engineers Middle East District Solicitation No. W912ER19R0001
October 2018
©Stanley Consultants 2018
TABLE OF CONTENTS
FURNITURE, FIXTURES, & EQUIPMENT
Design Narrative Tab 1
FF&E Plans Tab 2
Point of Contact List Tab 3
FF&E Order Data Sheets Tab 4
Item Code Index Tab 5
Room Contents List Tab 6
Color Boards Tab 7
SOLICITATION No.: W912ER19R0001
Al Dhafra Air Base
Section 1
Narrative
General
The project will include design of an approximately 6,000 SM single bay large aircraft maintenance hangar (LAMH), sized mainly for KC-10 and KC-46 aircrafts, with fuel cell maintenance capabilities.
The facility will also be utilized for maintenance of C-17, E-3 AWACS, F-15 Eagle, F-22 Raptor, U-2 and RQ-4 Global Hawk aircraft. There is no requirement for shops within the facility.
The LAMH will eventually operate at full capacity (15 per shift) once future facilities within the US
Development Area in Al-Dhafra AB come on line. Initially fuel cell maintenance may be the only group to occupy the facility except when maintenance is scheduled for other groups/planes.
Hangar Bay
The major space of the LAMH is the hangar bay. Furnishings and equipment for the hangar bay are primarily user provided by the maintenance group. Cage storage and structural steel shelving are provided under the Architectural package.
The major ancillary areas to support the hangar bay will be:
1. Dispatch/Production Office:
a. The office will accommodate 3 work stations and 3-drawer file cabinets.
b. The room will require window(s) for visual observation of the hangar bay. 90-degree corner with windows in both walls will be provided for improved observation of the hangar bay. The office will have access from the hangar bay through a vestibule corridor.
2. Office:
a. This office is for Supervisors (E-7 rank) and will be located next to
Dispatch/Production Office.
b. The office will accommodate 3 work stations and file cabinets.
3. e-Publication Room:
a. The room will have shelves to store publications and manuals. It will also accommodate 2 work stations.
4. Breakroom:
a. Room will be used as a lounge as well as break room.
b. The room will accommodate:
i. Microwave, refrigerator, and coffee maker.
ii. Dining tables and chairs
iii. Sofa / lounge chairs
iv. TV
v. 3 small computer stations
5. Lockers/Showers/Toilets:
a. Separate men and women clean and dirty shower/locker/toilet areas will be provided for this facility. The lockers/showers /toilets will have access from the hangar through a vestibule corridor.
b. Access to the clean toilet, shower and locker will be through an air-lock.
c. Locker counts:
i. Men
1. Dirty Area: Fourteen (six double-tier lockers)
2. Clean Area: Fourteen (six double-tier lockers)
ii. Women
1. Dirty Area: Four (two double-tier lockers)
2. Clean Area: Four (two double-tier lockers)
6. Janitor: The room will accommodate a mop sink and utility shelf.
7. CTK (consolidated tool kits) & Bench Stock Room:
a. The room will be used primarily for fuel cell maintenance operations.
b. The room will accommodate work benches, shelves, coverall bins, secure shelving, and portable racks.
8. Test Cell Room:
a. Room will be designed to accommodate KC-10 fuel cell maintenance as well as KC-
46 Body Tank Room. The procedure will be to remove body tank from plane, the cart to the body tank room where it will be hoisted for service as needed.
b. The room will accommodate fuel test cabinets, respirator cleaning and drying equipment, respirator storage, a sink and countertop.
9. Apparatus Room:
a. The room will be located close to Test Cell Room.
b. The room will accommodate personal protective equipment storage lockers.
10. Fire Equipment / Foam Room: A 6 m x 7.3 m room with access from exterior to house the foam equipment.
11. Fire Pump Room: 8.2 m x 11 m room with access from exterior to house fire pumps and associated electricals equipment.
12. Electrical Room: An Electrical Room will be provided at the north-west corner of the building with direct access from the exterior.
13. COMM Room: Due to distance limitation, there will be two COMM Rooms, one near offices and the other one near CTK/Bench Stock area. Rooms will have minimum dimension of 2.4 m x 2.4 m.
14. Mechanical Room;
a. There will be two mechanical rooms at second floor to serve the LAMH.
b. Access to the room will be via staircases from the exterior only.
Codes and Standards
The design and specification of all work will be in accordance with the latest military standards and guidelines, with applicable codes and ordinances, and with codes and industry standards referenced herein. The following is a summary of major organizations with codes and standards referenced herein.
Design Standards Date/Edition
ABA (Architectural Barriers Act Accessibility Standard for
Department of Defense Facilities)
13 March 2015
Air Force Sustainable Design and Development (SDD) Implementing
Guidance Memorandum
26 February 2016
International Building Code (IBC) 2015
Local Building Codes Latest Edition
Middle East District, Design Instructions Manual October 2016
NFPA 101: Life Safety Code 2015
UAE Fire and Life Safety Code of Practice 2017
Design Standards Date/Edition
UFC 1-200-01: DoD Building Code (General Building Requirements) 20 June 2016
UFC 3-101-01: Architecture 20 June 2016
UFC 3-120-10: Interior Design Change 1
UFC 3-190-06: Protective Coatings and Paints 16 January 2004
UFC 4-211-01: Aircraft Maintenance Hangars 13 April 2017
Accessibility
Handicap accessibility will only be required for the administration area and will comply with the requirements of the Architectural Barriers Act (ABA). Office, toilets, breakroom and e-publication room will comply with handicap accessibility requirements.
Performance
The buildings will be designed to minimize life cycle cost, energy consumption, and maintenance through proper selection of mass, form, materials, and construction standards. Suitable materials will be selected for overall visual compatibility with the rest of the buildings, maintenance requirements, cost, availability, texture, color, etc. There will be no unnecessary refinement and embellishment in the design.
Sustainable Design
The project will conform to UFC-1-200-02 High Performance and Sustainable Building
Requirements to the greatest extent practical.
Sustainable design ratings (LEED AND EPACT 2005) will not be evaluated.
Section 2
FF&E Plans
AIRCRAFT HANGAR DOOR
2.
TO
N
M O
N O
R
AI
L (A
BO
VE
UP UP
AIRCRAFT HANGAR DOOR
I-400
I-401
102 103
106 107
119121
129108
127 124
112 113 115
GENERAL NOTES - FURNITURE PLANS:
VERIFY FIELD CONDITIONS PRIOR TO ORDERING
FF&E TO ENSURE PROPER FIT OF ALL ITEMS.
PROVIDE ALL FF&E COMPONENTS REQUIRED TO
FULFILL THE DESIGN INTENT OUTLINED IN THE FF&E
PACKAGE, AND ASSEMBLE FF&E PER
MANUFACTURER'S WRITTEN INSTRUCTIONS.
ALL WORK SURFACES ARE TO HAVE ONE GROMMET
WITH COVER MINIMUM.
1.
2.
3.
US Army Corps of Engineers ®
SHEET ID
U S
AR
M
Y C
O
RP
S O
F
EN
G
IN
EE
RS
D R
AW
N
B Y:
D E
SI
G
N E
D B
Y
S U
BM
IT
TE
D
B Y:
S
IZ
E
C H
EC
K
ED
B
Y:
A N
SI
D
IS
SU
E D
A
TE
C O
N
TR
AC
T
N O
S O
LI
C
IT
A
TI
O
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D
AT
E M
A R
K D
E
SC
R
IP
TI
O
N
Middle East District
M
ID
D
LE
E
AS
T D
IS
TR
IC
T
P .O
. B O
X
W
IN
C H
ES
TE
R , V
A
4-
UNLESS OTHERWISE NOTED ALL LINEAR
DIMENSIONS SHOWN, ARE IN MILLIMETERS.
FI
LE
N A
M E
W
2E R
-1 4-
D -0
P . V
O G
E L
AL
D
H
AF
R A
A
FB
, U N
IT
E
D A
R A
B E
M
IR
A
TE
S
I-100
C O
M
PR
E H
E N
SI
V E
FU
R
N
IT
U R
E P
LA
N
S .H
E N
S
LE
Y
A .W
A
LK
ER
H .G
R
IM
ES
/1
2/
LA
R G
E A
IR
C
R A
FT
M
AI
N
TE
N
A N C
E H
A N
G A
R
U E
-4
U E
-4
3 1 2A
-I-
0P N
.d w g
A5 0 5 10 15
1:200
AREA 'A' AREA 'B'
AREA 'C' AREA 'D'
KEY MAPKEY MAPKEY MAPKEY MAP
SCALE = 1 : 2001 COMPREHENSIVE FURNITURE PLAN
ROOM LEGEND - GROUND FLOOR PLAN
NUMBER NAME
100 HANGAR BAY
101 CORRIDOR
102 ELECTRICAL ROOM
103 CTK AND BENCH STOCK
104 TEST CELL
105 AIR LOCK
106 APPARATUS ROOM
107 COMMUNICATIONS ROOM
108 VESTIBULE
109 WOMEN'S LOCKER ROOM (DIRTY)
110 WOMEN'S SHOWER (DIRTY)
111 WOMEN'S LOCKER/SHOWER ROOM (CLEAN)
112 WOMEN'S TOILET (DIRTY)
113 WOMEN'S TOILET (CLEAN)
114 MAIN COMMUNICATIONS ROOM
115 JANITOR
116 BREAK ROOM
117 ePUB
118 OFFICE
119 FOAM ROOM
120 FIRE PUMP
121 DISPATCH
122 VESTIBULE
123 MEN'S TOILET (CLEAN)
124 MEN'S LOCKER/SHOWER ROOM (CLEAN)
125 MEN'S SHOWER (DIRTY)
126 MEN'S SHOWER (DIRTY)
127 MEN'S TOILET (DIRTY)
128 MEN'S LOCKER ROOM (DIRTY)
129 AIR LOCK
130 CORRIDOR
NN
PLAN TRUE
2.
TO
N
M O
N O
R
AI
L
(A
BO
VE
UP
TYP. 13
WB2
TYP. 3
ST9
ST8
ST10
ST1
EQ6
EQ7 ST2
ST3
TYP. 3
WB1
TYP. 3
TYP. 2
100104
106 107
103102
BULLETIN BOARD -
REFER TO APPENDIX B
US Army Corps of Engineers ®
SHEET ID
U S
AR
M
Y C
O
RP
S O
F
EN
G
IN
EE
RS
D R
AW
N
B Y:
D E
SI
G
N E
D B
Y
S U
BM
IT
TE
D
B Y:
S
IZ
E
C H
EC
K
ED
B
Y:
A N
SI
D
IS
SU
E D
A
TE
C O
N
TR
AC
T
N O
S O
LI
C
IT
A
TI
O
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D
AT
E M
A R
K D
E
SC
R
IP
TI
O
N
Middle East District
M
ID
D
LE
E
AS
T D
IS
TR
IC
T
P .O
. B O
X
W
IN
C H
ES
TE
R , V
A
4-
UNLESS OTHERWISE NOTED ALL LINEAR
DIMENSIONS SHOWN, ARE IN MILLIMETERS.
FI
LE
N A
M E
W
2E R
-1 4-
D -0
P . V
O G
E L
AL
D
H
AF
R A
A
FB
, U N
IT
E
D A
R A
B E
M
IR
A
TE
S
I-400
G R
O U
N D
F
LO
O R
F U
R N
IT
U
R E
P
LA
N
A R
E A
'A
N O
R T H
W
ES
T Q
U A D
R
AN
T
S .H
E N
S
LE
Y
A .W
A
LK
ER
H .G
R
IM
ES
/1
2/
LA
R G
E A
IR
C
R A
FT
M
AI
N
TE
N
A N C
E H
A N
G A
R
U E
-4
U E
-4
3 1 2A
-I-
0P N
.d w g
A1 0 1 2 3 4 5 6 7 8 9
1:100
AREA 'A'
KEY MAP
ROOM LEGEND - GROUND FLOOR PLAN
NUMBER NAME
100 HANGAR BAY
101 CORRIDOR
102 ELECTRICAL ROOM
103 CTK AND BENCH STOCK
104 TEST CELL
105 AIR LOCK
106 APPARATUS ROOM
107 COMMUNICATIONS ROOM
108 VESTIBULE
109 WOMEN'S LOCKER ROOM (DIRTY)
110 WOMEN'S SHOWER (DIRTY)
111 WOMEN'S LOCKER/SHOWER ROOM (CLEAN)
112 WOMEN'S TOILET (DIRTY)
113 WOMEN'S TOILET (CLEAN)
114 MAIN COMMUNICATIONS ROOM
115 JANITOR
116 BREAK ROOM
117 ePUB
118 OFFICE
119 FOAM ROOM
120 FIRE PUMP
121 DISPATCH
122 VESTIBULE
123 MEN'S TOILET (CLEAN)
124 MEN'S LOCKER/SHOWER ROOM (CLEAN)
125 MEN'S SHOWER (DIRTY)
126 MEN'S SHOWER (DIRTY)
127 MEN'S TOILET (DIRTY)
128 MEN'S LOCKER ROOM (DIRTY)
129 AIR LOCK
130 CORRIDOR
SCALE = 1 : 1001 NORTHWEST - GROUND FLOOR FURNITURE PLAN
FF&E
TAG DESCRIPTION QTY
CH1 SOFA 3
CH2 BREAK ROOM CHAIR 8
CH3 TASK CHAIR 3
CH4 OFFICE CHAIR 8
CH5 BENCH 4
CH6 ONE SEAT BENCH 1
CH7 LOCKER BENCH 1
D1 COMPUTER DESK 1
D2 COMPUTER DESK 2
D3 COMPUTER WORKSTATION 3
D4 COMPUTER WORKSTATION 3
EQ1 TELEVISION 1
EQ2 MICROWAVE 1
EQ3 REFRIGERATOR 1
EQ4 SHOWER CURTAIN & ROD 3
EQ5 COFFEE MAKER 1
EQ6 RESPIRATOR CLEANER 1
EQ7 RESPIRATOR DRYER 1
EQ8 REFRIGERATOR 1
EQ9 SHOWER CURTAIN & ROD 1
ST1 HEAVY DUTY SHELVING w/ SECURITY SHUTTER 2
ST2 RESPIRATOR STORAGE 3
ST3 TEST PLUG CABINET 1
ST4 CREDENZA 1
ST5 FILING CABINET 16
ST6 LATERAL FILE 6
ST7 BOOKSHELF 20
ST8 HEAVY DUTY SHELVING 13
ST9 SOILED COVERALL BIN w/ LID 3
ST10 LAPTOP STORAGE RACK 1
TA1 DINING TABLE 2
TA2 COFFEE TABLE 1
TA3 END TABLE 1
TR1 MEDIUM WASTE BASKET 7
TR2 LARGE WASTE BASKET 12
WB1 WORK BENCH 3
WB2 WOODEN WORK BENCH 1
FIXED EQUIPMENT SCHEDULE - REFER TO APPENDIX B
QTY
BULLETIN BOARD 2
BULLETIN BOARD w/ DOOR 1
MARKER BOARD 2
LOCKER 16
MOP RACK w/ SHELF 1
UP
CH2
TYP. 8
TA1TA1
CH1a
ST4
D1
CH3
D2
CH4
CH4
CH4
TYP. 3
TYP. 2
TYP. 2
TYP. 20
TYP. 3
EQ2
EQ3
EQ1
TYP. 3
ST5
TYP. 8
ST5
TYP. 8
CH5
CH5
CH5
TYP. 3
TYP. 3
TYP. 3
TYP. 3
TR2
TYP. 3
TR2
TR2
TR2 TR2
TR2
TR2
TR2
TR2
TR2
EQ5
TYP. 2
TR1
EQ4
TA3
CH6
TA2
EQ4
TYP. 2
LOCKERS - REFER
TO APPENDIX B
ST6
TYP. 4
LOCKERS - REFER
TO APPENDIX B
EQ8
ST6
TYP. 2
EQ9
MOP RACK W/
SHELF - REFER
TO APPENDIX B
ST7
D3
D4
TR1
TR1
BULLETIN
BOARD - REFER
TO APPENDIX B
BULLETIN BOARD W/ DOOR -
REFER TO APPENDIX B
MARKER BOARD -
REFER TO APPENDIX B
119121
123124
108 129
111109
110 114
115 130
MARKER BOARD -
REFER TO APPENDIX B
CH5
LOCKERS - REFER
TO APPENDIX B
CH7
CH1b
US Army Corps of Engineers ®
SHEET ID
US
A
RM
Y
CO
RP
S O
F
EN
G
IN
EE
RS
D R
A W N
BY
D
ES
IG
N
ED
BY
SU
B M
IT
TE
D
BY
SI
ZE
C H
E C
KE
D B Y
AN
S I
D
IS
SU
E D
AT
E :
C O
N
TR
AC
T
N O
SO
L I
C
IT
AT
IO
N N
O
G
2 3 4 5 6 7 8 9 10
F
E
D
C
B
A
D
AT
E M
AR
K
D
ES
C R
IP
TI
O N
Middle East District
M
ID
D
LE
E
AS
T D
IS
TR
IC
T
P.
O
. B O
X
W
IN
C
H
ES
TE
R
, V A
4-
UNLESS OTHERWISE NOTED ALL LINEAR
DIMENSIONS SHOWN, ARE IN MILLIMETERS.
FI
LE
N
AM
E:
W
2E R
-1 4-
D -0
P.
V
O G
EL
AL
D
H
AF
R A
AF
B, U N
IT
ED
A R
AB
E
M
IR
AT
E S
I-401
G R
O U
N D
FL
O
O R
FU
R
N
IT
U R
E
PL
AN
-A
R
EA
'B
N O
R
TH
EA
ST
Q U
AD
R
A N T
S.
H
EN
SL
EY
A.
W
AL
KE
R
H .G
R
IM
ES
/1
2/
LA
R G
E
AI
R C
R
AF
T M
AI
N
T E N
AN
C
E H
AN
G
A R
U E-
1 2
U E-
4 5
A -
I-4
PN
.d w g
A1 0 1 2 3 4 5 6 7 8 9
1:100
AREA 'B'
KEY MAP
ROOM LEGEND - GROUND FLOOR PLAN
NUMBER NAME
100 HANGAR BAY
101 CORRIDOR
102 ELECTRICAL ROOM
103 CTK AND BENCH STOCK
104 TEST CELL
105 AIR LOCK
106 APPARATUS ROOM
107 COMMUNICATIONS ROOM
108 VESTIBULE
109 WOMEN'S LOCKER ROOM (DIRTY)
110 WOMEN'S SHOWER (DIRTY)
111 WOMEN'S LOCKER/SHOWER ROOM (CLEAN)
112 WOMEN'S TOILET (DIRTY)
113 WOMEN'S TOILET (CLEAN)
114 MAIN COMMUNICATIONS ROOM
115 JANITOR
116 BREAK ROOM
117 ePUB
118 OFFICE
119 FOAM ROOM
120 FIRE PUMP
121 DISPATCH
122 VESTIBULE
123 MEN'S TOILET (CLEAN)
124 MEN'S LOCKER/SHOWER ROOM (CLEAN)
125 MEN'S SHOWER (DIRTY)
126 MEN'S SHOWER (DIRTY)
127 MEN'S TOILET (DIRTY)
128 MEN'S LOCKER ROOM (DIRTY)
129 AIR LOCK
130 CORRIDOR
SCALE = 1 : 1001 NORTHEAST - GROUND FLOOR FURNITURE PLAN
FF&E
TAG DESCRIPTION QTY
CH1a TWO-SEAT LOUNGE SOFA 2 CH1b TWO-SEAT LOUNGE SOFA 1
CH2 BREAK ROOM CHAIR 8
CH3 TASK CHAIR 3
CH4 OFFICE CHAIR 8
CH5 BENCH 4
CH6 ONE SEAT BENCH 1
CH7 LOCKER BENCH 1
D1 COMPUTER DESK 1
D2 COMPUTER DESK 2
D3 COMPUTER WORKSTATION 3
D4 COMPUTER WORKSTATION 3
EQ1 TELEVISION 1
EQ2 MICROWAVE 1
EQ3 REFRIGERATOR 1
EQ4 SHOWER CURTAIN & ROD 3
EQ5 COFFEE MAKER 1
EQ6 RESPIRATOR CLEANER 1
EQ7 RESPIRATOR DRYER 1
EQ8 REFRIGERATOR 1
EQ9 SHOWER CURTAIN & ROD 1
ST1 HEAVY DUTY SHELVING w/ SECURITY SHUTTER 2
ST2 RESPIRATOR STORAGE 3
ST3 TEST PLUG CABINET 1
ST4 CREDENZA 1
ST5 FILING CABINET 16
ST6 LATERAL FILE 6
ST7 BOOKSHELF 20
ST8 HEAVY DUTY SHELVING 13
ST9 SOILED COVERALL BIN w/ LID 3
ST10 LAPTOP STORAGE RACK 1
TA1 DINING TABLE 2
TA2 COFFEE TABLE 1
TA3 END TABLE 1
TR1 MEDIUM WASTE BASKET 7
TR2 LARGE WASTE BASKET 12
WB1 WORK BENCH 3
WB2 WOODEN WORK BENCH 1
FIXED EQUIPMENT SCHEDULE - REFER TO APPENDIX B
QTY
BULLETIN BOARD 2
BULLETIN BOARD w/ DOOR 1
MARKER BOARD 2
LOCKER 16
MOP RACK w/ SHELF 1
Section 3
Point of Contact List For Information Only
ADVANCED BUSINESS CONCEPTS
HERMAN MILLER WHOLE PACKAGE PROVIDER
Ayman Najim, Architect, Chief Operating
UAE
ayman@abc-ae.com
CREATIVE-VA
STEELCASE WHOLE PACKAGE PROVIDER
Kim Riner, CID, Senior Project Designer 500 Woodlake Circle, Suite C, Chesapeake, VA 23320 757-382-5417 KRiner@creative-va.com
DETECTO
203 East Daugherty St. Webb City, MO 64870 800-641-2008 cardinal@cardet.com
GRAINGER
203 East Daugherty St. Webb City, MO 64870 800-472-4643 CustomerSupport@grainger.com
HALLOWELL
Bobby Miller, Mid-Atlantic Regional Sales Manager 803-517-3371 BobbyMiller@hallowell-list.com mailto:KRiner@creative-va.com mailto:cardinal@cardet.com mailto:CustomerSupport@grainger.com mailto:BobbyMiller@hallowell-list.com
HAWORTH
Troy Andrews, Federal Government Specialist 2509 Magnolia Grande Court, Mobile, AL 36618 850-380-8155 Troy.Andrews@Haworth.com
HERMAN MILLER
Fernanda Garcia, International Sales Representative USA-International 305-542-4311 fernanda_garcia@hermanmiller.com
Carl Burkitt, Market Manager UAE & Oman +971 56 504 0889 carl_burkitt@hermanmiller.com
LOY’S OFFICE SUPPLIES
HAWORTH WHOLE PACKAGE PROVIDER
Danny Spradlin 228 Main St. LaGrange, GA 30241 706-333-4255 Dspradlin@loysoffice.com
Jim Williams 228 Main St. LaGrange, GA 30241 706-333-4255 Dspradlin@loysoffice.com
LYON
Maria Mojica, Government Sales Support 420 N. Main Street, Montgomery, IL 60538 630-264-9518 mmojica@lyonworkspace.com
Ray Fraser, Regional Manager 420 N. Main Street, Montgomery, IL 60538 205-249-8773 rfraser@lyonworkspace.com
NATIONAL OFFICE FURNITURE
Diane Dimel, District Manager Nashville, TN 615-815-6135 diane.dimel@nationalofficefurniture.com mailto:Dspradlin@loysoffice.com mailto:diane.dimel@nationalofficefurniture.com
PENCO PRODUCTS
Karen R Ross, Contract Administrator Fairfax, VA 22032 571-332-4345 karen.ross@promarkinc.com
PETER PEPPER PRODUCTS
Diane Hart – Hart Associates 1824 Walnut Street Kansas City, MO 64108 816-471-2559 diane@hartks.com
SPACESAVER, INC
Dennis Bredel, Bradford Systems 1735 Larkin Williams Road Fenton, MO 63026 636-730-0012 dennis@bradfordsystems.com
SOUTHWEST SOLUTION GROUP
Christopher Morris 2535-B E. State Highway 121 Lewisville, TX 75056 214-878-6765 cmorris@southwestsolutions.com
STANLEY VIDMAR
Michael Faulman 217-553-7726 michael.faulman@sbdinc.com
STEELCASE
David R. Sweeney, Federal Government Account Manager USA Southeastern Region 615-970-9510 DSWEENEY@steelcase.com
WISCONSIN BENCH
Ben Daniels, Northeastern Regional Sales Manager 715-773-2517 mailto:karen.ross@promarkinc.com mailto:diane@hartks.com mailto:dennis@bradfordsystems.com mailto:cmorris@southwestsolutions.com mailto:michael.faulman@sbdinc.com mailto:DSWEENEY@steelcase.com
Section 4
Order Data Sheets
Manufacturers
Warranty
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
TWO-SEAT LOUNGE SOFA CH1a
National Office Furniture / Fringe Lounge Collection
1. Herman Miller / Swoop Lounge Collection
2. Steelcase / Regard Collection
(or Equal)
1350-1450mm (W) x 685-760mm (D) x 915-1025mm (H) x 470-508mm (SH)
GENERAL:
Contemporary to transitional design two-seat lounge sofa.
Linear-lined aesthetic, mid-back modular lounge sofa with upholstered contrasting seat and back.
Single left arm facing unit.
Ganging brackets to be provided.
Leveling glides per leg.
SEAT CONSTRUCTION:
140 mm of high grade polyurethane foam covering a plywood seat panel.
FRAME CONSTRUCTION:
Constructed of plywood with tenon joints.
Joints glued and screwed for stability.
Capacity: 136 kg and under.
LEGS:
Die-cast aluminum.
Secured by screws to bottom of frame.
Powder coat painted.
UPHOLSTERY:
Synthetic leather high-performance fabric with durable stain-resistant patterned accent/contrasting fabric.
Provide finishes graded into the furniture manufacturer’s fabric grades.
Seat: Minimum 100,000 double rubs (Wyzenbeek) durability.
Back/Arm: 100,000 double rubs (Wyzenbeek) durability.
Frame: Minimum 10 years; Upholstery: Minimum 3 years
Seat – Ultrafabrics Brisa Original Black or solid color Black equivalent.
Back/Arm – Maharam Conduit or medium dark grey value with minimal light blue/grey geometric pattern.
LEG:
Cinder or black.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
TWO-SEAT LOUNGE SOFA CH1b
National Office Furniture / Fringe Lounge Collection
1. Herman Miller / Swoop Lounge Collection
2. Steelcase / Regard Collection
(or Equal)
1350-1450mm (W) x 685-760mm (D) x 915-1025mm (H) x 470-508mm (SH)
GENERAL:
Contemporary to transitional design two-seat lounge sofa.
Linear-lined aesthetic, mid-back modular lounge sofa with upholstered contrasting seat and back.
Single right arm facing unit.
patterned accent/contrasting fabric.
Provide finishes graded into the furniture manufacturer’s fabric grades.
Back/Arm: 100,000 double rubs (Wyzenbeek) durability.
Seat – Ultrafabrics Brisa Original Black or solid color Black equivalent.
Back/Arm – Maharam Conduit or medium dark grey value with minimal light blue/grey geometric pattern.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
TWO-SEAT LOUNGE SOFA CH2
Herman Miller / Keyn Chair
1. Steelcase / Enea Chair
2. Haworth / Very Chair
(or Equal)
596mm (W) x 596mm (D) x 876mm (H) x 470mm (SH)
GENERAL:
Chair is easily cleanable with soft cloth and mild detergent/water.
Chair must be capable of stacking minimum four high.
Upholstered seat pad with moisture barrier.
Waterfall edge seat.
Flexible perforated polymer back.
LEG/ARM/FRAME CONSTRUCTION:
Constructed of continuous formed steel.
Joints welded.
Four independent legs with nylon glides.
Capacity: 135 kg and under.
100% polyurethane.
Minimum: 100,000 double rubs (Wyzenbeek) durability.
Seat – Bingo or solid black.
Black paint.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
TASK CHAIR CH3
Herman Miller / Sayl Chair
1. Steelcase / Amia Chair
2. Haworth / Very Chair
(or Equal)
680mm (W) x 660mm (D) x 996mm (H) x 520mm (SH)
GENERAL:
Task chair with adjustable lumbar support: minimum 100mm.
Fully adjustable arms: minimum 100mm vertical, 30mm side, 50mm front/back, 11 degree pivot.
Five-star base with universal casters.
Minimum three height adjustment options.
360 degree rotation.
Synchronous tilt mechanism, adjustable with tension knob.
Welded tubular steel construction.
Secondary steel insert.
Capacity: 160 kg and under.
100,000 double rubs (Wyzenbeek) durability.
Frame and Mechanisms: Minimum 10 years; Upholstery: Minimum 3 years
Seat – Rivet in colorway Deep Sea or textured dark cool grey/teal.
ARMS/CAPS/BASE:
Black poly.
FRAME:
Black paint.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
OFFICE CHAIR CH4
Herman Miller / Mirra 2 Chair
1. Steelcase / Amia Chair
2. Haworth / Very Chair
(or Equal)
762mm (W) x 470mm (D) x 1085mm (H) x 520mm (SH)
GENERAL:
Task chair with adjustable lumbar support: minimum 100mm.
Fully adjustable arms: minimum 100mm vertical, 30mm side, 50mm front/back, 11 degree pivot.
Five-star base with universal casters.
Minimum three height adjustment options.
360 degree rotation.
Synchronous tilt mechanism, adjustable with tension knob.
Welded tubular steel construction.
Secondary steel insert.
Capacity: 160 kg and under.
100,000 double rubs (Wyzenbeek) durability.
Frame and Mechanisms: Minimum 10 years; Upholstery: Minimum 3 years
Airweave graphite suspension/mesh or dark solid grey mesh.
ARMS/CAPS:
Black or dark solid grey.
BASE:
Silver semi-polished/
Graphite or dark solid grey.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
BENCH CH5
Global / Locker Room Bench
1. Penco / Locker Room Bench
2. Tennsco / Locker Room Bench
(or Equal)
1066mm (W) x 508mm (D) x 438mm (H)
GENERAL:
ADA locker room bench with back support.
SEAT/BACK CONSTRUCTION:
32mm maple hardwood with 75-102mm radius edge on all sides and corners.
Two-coat catalyzed lacquer finish.
Pedestals made of heavy duty minimum 11 gauge steel tubing with top and bottom bell flanges for attachment.
Lag bolt connections.
Capacity: 320 kg and under.
Minimum 1 year
SEAT/BACK:
Clear maple.
Almond paint or tan/light cool grey neutral.
MAPLE ALMOND
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
BENCH CH6
National Office Furniture / Fringe Lounge Collection
1. Herman Miller / Swoop Lounge Collection
2. Steelcase / Regard Collection
(or Equal)
685-760mm(W) x 685-760mm (D) x 470mm (H)
GENERAL:
Contemporary to transitional design backless bench.
Linear-lined aesthetic with upholstered contrasting seat.
patterned accent/contrasting fabric.
Provide finishes graded into the furniture manufacturer’s fabric grades.
Seat – Ultrafabrics Brisa Original Black or solid color Black equivalent.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
LOCKER BENCH CH7
Global / Locker Room Bench
1. Penco / Locker Room Bench
2. Tennsco / Locker Room Bench
(or Equal)
915mm (W) x 240mm (D) x 438mm (H)
ADA locker room bench.
SEAT/BACK CONSTRUCTION:
32mm maple hardwood with 75-102mm radius edge on all sides and corners.
Two-coat catalyzed lacquer finish.
Pedestals made of heavy duty minimum 11 gauge steel tubing with top and bottom bell flanges for attachment.
Lag bolt connections.
Capacity: 320 kg and under.
SEAT/BACK:
Clear maple.
Almond paint or tan/light cool grey neutral.
MAPLE ALMOND
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
COMPUTER DESK D1
Herman Miller / Canvas Office Landscape
1. Steelcase / Answer & Universal Storage
2. Haworth / Compose & X-Series Storage
(or Equal)
2438mm (W) x 609mm (D) x 742mm (H)
3-seat rectangular computer desk.
WORKSURFACE CONSTRUCTION:
Rectangular laminate worksurface.
T-molded edge band – no self edging is acceptable.
Provide grommets at each back corner for each separate worksurface.
609mm (D) x 2438mm (W)
BASE CONSTRUCTION:
Rectangular all-welded minimum 16 gauge square metal tubing.
Two leveling glides per base frame.
Leveling glides minimum of 25mm adjustment.
Powder coat painted.
Screw attachment to worksurface
609mm (D) x 742mm (H).
Minimum 10 year
TOP:
Formica – Blackened Legno or dark warm grey wood grain.
EDGE:
Black.
Metallic silver.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
COMPUTER DESK D2
Herman Miller / Canvas Office Landscape
1. Steelcase / Answer & Universal Storage
2. Haworth / Compose & X-Series Storage
(or Equal)
1524mm (W) x 762mm (D) x 742mm (H)
Single-seat rectangular computer desk.
T-molded edge band – no self edging is acceptable.
762mm (D) x 1524mm (W)
Rectangular all-welded minimum 16 gauge square metal tubing.
Two leveling glides per base frame.
Leveling glides minimum of 25mm adjustment.
Powder coat painted.
Screw attachment to worksurface
762mm (D) x 742mm (H).
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
COMPUTER WORKSTATION D3
Herman Miller / Canvas Office Landscape
1. Steelcase / Answer & Universal Storage
2. Haworth / Compose & X-Series Storage
(or Equal)
2438mm (W) x 2438mm (D) x 736mm (H)
GENERAL:
Single-seat, left handed configuration rectangular computer desk.
1 – Supporting box/box/file pedestal storage unit with full width integrated pull.
Full extension ball bearing pedestal with counterweights for stability.
Storage must include positive interlock system that permits only 1 drawer or pullout shelf to open at a time.
File drawers have full-extension slides and hold letter-size front-to-back hanging files.
762mm (D) x 381mm (W) x 686mm(H)
1 – Overhead locking stanchion metal hutch 378-406mm (D) x 1828mm (W) x 1664mm (OH) with tack board insert 1828mm (W) x 406-508mm (H)
Wall mounted storage is unacceptable.
1 – Storage Tower: dual door, file/file unit with full width integrated pull.
Interior adjustable shelves. 609mm (D) x 609mm (W) x 1664mm (H)
Full extension ball bearing pedestal with counterweights for stability.
Storage must include positive interlock system that permits only 1 drawer or pullout shelf to open at a time.
Accessories: 1 – keyboard tray, 1 – dual monitor arm, and 2 – daisy chained LED under hutch mounted task light.
Rectangular laminate worksurface, minimum 30-31mm thickness.
T-molded edge band – no self edging is acceptable.
1 – 762mm (D) x 1828mm (W) & 1 – 609mm (D) x 1828mm (W).
Rectangular all-welded minimum 20-22 gauge steel or laminate full panel end supports.
2 - 609mm (D) x 742mm (H)
Half-height 3321-457mm (H) metal modesty panels minimum 20-22 gauge steel.
Two leveling glides per base support.
Leveling glides minimum of 25mm adjustment.
Powder coat painted.
Screw attachment to bottom of worksurface.
STORAGE CONSTRUCTION:
Textured paint on smooth steel. Exterior case minimum of 22 gauge steel.
Chassis with welded construction and corner reinforcement.
Minimum of 16 gauge steel ball bearing slides.
Lower storage drawer fronts minimum 20 gauge full width/integrated pulls.
Minimum 10 year
TACKBOARD:
Rivet in colorway Deep Sea or textured dark cool grey/teal.
LAMINATE BASE
ACCESSORIES TACKBOARD
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
COMPUTER WORKSTATION D4
Herman Miller / Canvas Office Landscape
1. Steelcase / Answer & Universal Storage
2. Haworth / Compose & X-Series Storage
(or Equal)
2438mm (W) x 2438mm (D) x 736mm (H)
GENERAL:
Single-seat rectangular computer desk.
1 – Supporting box/box/file pedestal storage unit with integrated pulls.
Full extension ball bearing pedestal with counterweights for stability.
Storage must include positive interlock system that permits only 1 drawer or pullout shelf to open at a time.
File drawers have full-extension slides and hold letter-size front-to-back hanging files.
609mm (D) x 381mm (W) x 736mm (H)
1 – Keyboard Tray
1 – Dual Monitor Arm
T-molded edge band – no self edging is acceptable.
Provide grommets at each back corner for each separate worksurface.
2 – 609mm (D) x 1524mm (W) straight worksurfaces.
1 – 609mm (D) x 914mm (W) curved corner worksurface.
Rectangular all-welded minimum 20-22 gauge steel or laminate full panel end supports, 609mm (D).
Half-height 321-457mm (H) metal modesty panels minimum 20-22 gauge steel.
Two leveling glides per base support.
Leveling glides minimum of 25mm adjustment.
Powder coat painted.
Screw attachment to bottom of worksurface.
STORAGE CONSTRUCTION:
Storage textured paint on smooth steel.
Exterior case minimum of 22 gauge steel.
Chassis with welded construction and corner reinforcement.
Minimum of 16 gauge steel ball bearing slides.
Lower storage drawer fronts minimum 20 gauge full width/integrated pulls.
Minimum 10 year
LAMINATE BASE
ACCESSORIES
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
TELEVISION EQ1
LG / HD Television
1. Samsung / HD Television
2. Sony / HD Television
3. (or Equal)
1103mm (W) x 249mm (D) x 716mm (H)
GENERAL:
1245mm Ultra high definition television with corresponding wall mounting bracket and hardware.
Picture quality: 3840x2160; 120hz; true color accuracy; 4k.
Built-in WiFi; Bluetooth capable
Inputs: (4) HDMI; (2) USB; (1) RF In; (1) Composite/Component In; Ethernet;
Optical; RS232C.
Remote control.
ELECTRICAL REQUIREMENTS
240 VAC, 50 Hz.
BS-1363 cord plug.
Provide appliances that are rated for energy savings.
Audio: 2.0 Channel; 20 Watt output
Minimum 1 year
FRAME FINISH:
Black or Silver.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
MICROWAVE EQ2
LG / HD Microwave
1. Samsung / Microwave
2. Sharp / Microwave
3. (or Equal)
521-606mm (W) x 406-492mm (D) x 330-346mm (H)
GENERAL:
Countertop
Minimum 0.57 cu. m capacity.
Output: 1,200 / 1,350 microwave.
406 mm diameter turntable.
Smooth glass display.
LED Lighting
230 VAC, 50 Hz.
BS-1363 cord plug.
Provide appliances that are rated for energy savings.
14 Amp, 1600 Watt.
Minimum 1 year
EXTERIOR FINISH:
Stainless steel
Black LED display
INTERIOR:
Grey enamel or white.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
REFRIGERATOR EQ3
LG / French Door Refrigerator
1. Frigidaire / FGHG2368TF
2. Samsung / RF261BEAESG-AA
3. (or Equal)
908 mm (W) x 898mm (D) x 1771mm (H)
GENERAL:
Ultra capacity 3-door French door refrigerator with bottom freezer door.
Electronic/digital temperature controls.
4 split adjustable cantilevered shelves.
6 bins in-door.
2 humidity crisper bins.
BS-1363 cord plug.
Provide appliances that are rated for energy savings.
SURFACE FINISH:
HANDLES FINISH:
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
SHOWER CURTAIN & ROD EQ4
Grainger / Shower Curtain and Rod
1. Bobrick / Heavy Duty Shower Curtain and Rod
2. C&H Government / Heavy Duty Shower Curtain and Rod
3. (or Equal)
Curtain: 1067mm (W) x 1828mm (H); Rod 914mm (L) x 25mm (Dia.)
GENERAL:
Nylon vinyl shower curtain.
Heavy duty metal grommets.
Chrome plated stainless steel shower rod.
Minimum 1 year
CURTAIN FINISH:
White
ROD FINISH:
Stainless steel chrome plated
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
COFFEE MAKER EQ5
Bunn / Wave15-S-APS
1. Bunn / 39900.0005 Brewer
2. Adcraft / UB-286 Carafe Coffee Brewer
3. (or Equal)
246 mm (W) x 437mm (D) x 475mm (H)
Minimum 1 year
SURFACE FINISH:
Stainless steel.
FUNNEL/LEG FINISH:
Black plastic.
Stainless steel low profile air pot coffee brewer with adjustable legs.
Hot water faucet and funnel to deflect hot liquids.
Slide-out booster tray.
Machine brews directly into a thermal carafe.
Include 1.9L stainless steel thermal carafe.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
RESPIRATOR CLEANER EQ6
1. (or Equal)
1905 mm (W) x 686 mm (D) x 1092 mm (H)
Minimum 1 year
SURFACE FINISH:
Stainless steel.
GENERAL:
Stainless Steel respirator washer.
Accommodates 16 full or 32 half masks per cycle.
Automatic chemical injection system.
Include initial disinfecting rinse agent, detergent.
Stainless steel pre-cleaning table and sink with sprayer.
230VAC, 50 hertz, 6 Amp. BS-1363 cord plug.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
RESPIRATOR DRYER EQ7
1. (or Equal)
584 mm (W) x 584 mm (D) x 1575 mm (H)
Minimum 1 year
SHELVING FINISH:
Chrome/stainless steel.
COVER FINISH:
Capacity: 24 full-face masks; 48 half-face masks
3 stainless steel baskets (GS2102).
Ambient air drying unit. Fan vents through top of the unit.
Zippered hood dryer cover (GD7500)
Cycle time: 10-60 minutes (user selected)
Air flow: 2500 CFM
4 – leg individual heavy-duty locking casters.
230VAC, 50 hertz, 6 Amp.
BS-1363 cord plug with minimum 2438 mm (L) cord.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
REFRIGERATOR EQ8
True / Glass Door Merchandiser
1. Fagor / Glass Door Merchandiser Refrigerator
2. Avantco / Swing Glass Door Merchandiser Refrigerator with LED Lighting
3. (or Equal)
686 mm (W) x 759 mm (D) x 1998mm (H)
Minimum 1 year
FINISH:
Heavy-duty commercial glass door refrigerator.
White-coated aluminum interior walls and a stainless steel floor.
Single self-closing, anti-fog swing glass door with LED interior lamps.
Digital temperature controller with display .
1/4 hp compressor.
Top mounted cooling fan.
230-240VAC, 50 hertz, 6 Amp.
Provide appliances that are rated for energy savings.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
SHOWER CURTAIN & ROD EQ9
Grainger / Shower Curtain and Rod
1. Bobrick / Heavy Duty Shower Curtain and Rod
2. C&H Government / Heavy Duty Shower Curtain and Rod
3. (or Equal)
Curtain: 1828mm (W) x 1828mm (H); Rod 1219mm (L) x 25mm (Dia.)
GENERAL:
Nylon vinyl shower curtain.
Heavy duty metal grommets.
Chrome plated stainless steel shower rod.
Minimum 1 year
CURTAIN FINISH:
ROD FINISH:
Stainless steel chrome plated
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
HEAVY DUTY SHELVING w/ SECURITY SHUTTER ST1
Spacesaver / Security Shelf
1. Southwest Solutions / Locking Tambour Doors
2. Global Industrial / Security Work Center Storage Cabinet
3. (or Equal)
1219 mm (W) x 609 mm (D) x 2165 mm (H)
GENERAL:
4-post, all steel reinforced shelving.
Full metal back panel for security.
4 full width adjustable steel shelves.
Adjustable shelf 38mm centered vertically.
Shelf width: 1219mm; Clear width 1168mm.
Overhead coiling security door – locking.
L01 padlock eye; padlock required.
Padlock installation on bottom of slat and guide rail assembly.
SHELF CONSTRUCTION:
Standard shelves 14mm in height and be formed of minimum 18 gauge cold rolled steel with flanges on all four sides.
Shelves supported front and rear by two shelf supports of minimum 14 gauge hot rolled steel.
Shelf capacity: minimum of 227 kg or under.
SECURITY DOOR CONSTRUCTION:
37mm foam filled rolled aluminum slat security door.
Coil coated with a high quality polyester paint.
Interlocking slats continuous for entire door width.
Include side locks stabled or glued to end of alternating slats.
FRAME/SHELF FINISH:
Black powder coat
L01: Padlock Eye
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR BASE
SOLICITATION No.: W912ER19R0001
Item Code Item
Image shown for illustration purposes only.
RESPIRATOR STORAGE ST2
Hallowell / Safety-View Lockers
1. Southwest Solutions Group, Inc. / Inspection Box Lockers with Clear Doors
2. Global Industrial / Inspection Box Lockers with Clear Doors
3. (or Equal)
381 mm (W) x 915 mm (L) x 1981 mm (H)
GENERAL:
Locker boxes 304 mm (H) x 304 mm (W) x 381 mm (D)
Transparent polycarbonate doors for unobstructed content viewing.
Continuous piano hinge steel doors.
18 locker boxes per unit (3-wide, 6 high).
Each box has friction latch for pad lock.
Each box has number plate attached to door.
All steel minimum 18 gauge frame and locker boxes.
150 mm steel legs.
Minimum 2 year
Parchment enamel paint, or light colored neutral paint finish.
Finishes
Notes 1. Item style, grade, size, pattern, color, and texture are coordinated throughout the project.
2. Provide room number on carton.
3. Contractor shall verify that all equal item sizes conform to project requirements and fit within designated room floor plans.
4. Laminate: all references to laminate shall specify High-Pressure Laminate only: low-pressure laminate and/or melamine are not acceptable
Dimensions
Description of
Salient Features
Item Description (proposed equals must meet the salient features outlined herein to be acceptable)
Approved
Equals
Basis of Design
LARGE AIRCRAFT MAINTENANCE HANGAR, AL DHAFRA AIR…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it.