Package_3_-_100_Thule_Consolidation_2_-_SID-CID.pdf

THULE AIR BASE, GREENLAND

100% SUBMISSION

5 FEBRUARY 2014

SID / CID PACKAGE

CONSOLIDATED VEHICLE MAINTENANCE &

PAVEMENTS & GROUNDS FACILITY

New w YoYorkrk DDisistrtricict t PNPN WWCX103020 88

A M M A N N W H I T N E Y&

Prepared By:

Jacobs/Ammann & Whitney

In Collaboration With:

US Army Corps of Engineers New York District

FY14 Thule Consolidation 2 Thule Air Base, Greenland

100% Submission February 5, 2014

SECTION

Proj. No. FDWD5945

Table of Contents

1 STRUCTURAL INTERIOR DESIGN (SID)

1.1 SID Design Objectives

1.2 Interior Finish Boards

1.3 Interior Finish Cut Sheets

1.4 Finish Warranty Information

1.5 SID Documents

I-101 First Floor Finish Plan

I-102 Second Floor Finish Plan

I-103 First Floor Signage Plan

I-104 Second Floor Signage Plan

I-201 Interior Elevations

I-202 Interior Elevations

I-203 Interior Elevations

I-501 Interior Details

I-502 Exterior Details

I-601 Interior Finish Material Schedule

I-602 Signage & Window Treatment Schedule

I-611 Room Finish Schedule

2 COMPREHENSIVE INTERIOR DESIGN (CID)

2.1 CID Design Objectives

2.2 Furniture, Fixtures & Equipment (FF&E) Order Forms

2.3 Private Office & Workstation Typical Plans

2.4 Furniture Schedule

SECTION

Table of Contents

2.5 Alternate Manufacturer List

2.6 Furniture, Fixtures & Equipment (FF&E) Finish Boards

2.7 FF& E Procurement List

2.8 Not Applicable

2.9 FF&E Warranty Information

2.10 Unicor Waiver

2.11 CID Documents

I-105 First Floor Furniture Plan – Part A

I-106 Second Floor Furniture Plan – Part A

I-401 Enlarged Furniture Plans

I-402 Enlarged Furniture Plans

For additional information and questions please contact the Designer of Record:

Anita Bowman Jacobs 1100 North Glebe Road Suite 500 Arlington, VA 22201 Phone: 571-218-1374 anita.bowman@jacobs.com

Structural Interior Design (SID)

1.1 SID Design Objectives

Design Objectives

SID DESIGN OBJECTIVES

The Thule Vehicle Maintenance & Pavements & Grounds Facility, Greenland consists of a multi-story, steel framed building of 3,318 GSM (40,021 GSF). The facility includes areas for vehicle maintenance (trucks, snowplows, heavy equipment), storage, and a main reception area and counter on the ground level and administrative/support areas on the upper level. The building will reflect both user needs and functionality and will provide a comfortable yet durable facility in which to complete their operations.

The aesthetics of the Thule VM & PG building will provide an image of security, strength, professionalism and pride. The exterior of the building will be exposed concrete clad with insulated metal panels. Exterior doors will be insulated hollow metal and segmented overhead garage doors will be used at vehicle entries. The materials used will need to be durable, with low maintenance and an aesthetically pleasing appearance.

The image portrayed by the exterior of the Thule VM & PG building will be carried through to the inside of the building. The interior finishes will be simple, yet functional and durable. The colors will be neutral with gray tones with blue accents. The flooring finishes offer durability and safety while providing complementary accents that pull the remainder of the room finishes together. The floor on the ground level will be sealed concrete, with slip-resistant porcelain tile in restrooms, shower and locker room areas.

To define the reception area the flooring will be a modular carpet tile with seal concrete along the corridor. Flooring for the upper level will be mostly carpet tile and sheet vinyl with static dissipative properties in the Break/Kitchen and Laundry room areas. The carpet tile in the office areas will be a mixture of blue, red and gold tones. The carpet tile will be durable for ease of replacement if necessary when stained or damaged.

Walls will be painted soothing neutral colors in the office and shop areas. To help resist moisture; walls, ceilings, doors and door frames in the wash bay will be painted with durable epoxy paint. In addition, wash bay walls will have a wainscoting of fiberglass reinforced plastic (FRP). Special spaces such as the break/kitchen area will have accent walls painted in complementary colors of blue and beige that will blend with the overall color palette yet add an extra point of interest to the space. Woven fiberglass wall covering will be used under the paint in public spaces like corridors, reception and break/kitchen areas.

The overall look and feel of the VM & PG Facility, Greenland will be one the occupants will be proud of for many years to come.

1.2 Interior Finish Boards

Interior Finish Boards

1100 North Glebe Road, Suite 500 Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

ACP-1 SURFACE: CEILING

MATERIAL: ACOUSTICAL CEILING PANEL

MANUFACTURER: KNAUF DANOLINE

MODEL: 400 TANGENT (400 X 1200 MM)

COLOR: WHITE

REMARKS:

CG-1 SURFACE: WALL

MATERIAL: CORNER GUARD WALL PROTECTION

MANUFACTURER: CS ACROVYN

MODEL: CO-8 CORNER GUARD

COLOR: STAINLESS STEEL

CPT-1 SURFACE: FLOOR

MATERIAL: MODULAR CARPET TILE

MANUFACTURER: TANDUS

MODEL: INFINITY 05849, 18" X 18" (457 X 457 MM) MODULAR TILE, ER3 MODULAR BACKING

COLOR: 55022 MOONSTONE

REMARKS: INSTALLATION: MONOLITHIC

CB-1 SURFACE: WALL

MATERIAL: PORCELAIN TILE BASE

MANUFACTURER: CROSSVILLE

MODEL: SHADES, 6" X 12" (152 X 305 MM) UNPOLISHEDTILE

COLOR: AV24T HAZE UPS

REMARKS: BASE AT RESTROOM FLOOR

CT-1 SURFACE: FLOOR

MATERIAL: PORCELAIN TILE

MANUFACTURER: CROSSVILLE

MODEL: SHADES, 24" X 24" (610 X 610 MM) UNPOLISHEDTILE

COLOR: AV24T HAZE UPS

REMARKS: FIELD AT RESTROOM FLOOR

CT-2 SURFACE: WALL

MANUFACTURER: DALTILE

MODEL: GALLERY SLIMLITE, 12" X 24" (305 X 610 MM) UNPOLISHEDTILE

COLOR: J500 WHITE

REMARKS: FIELD AT RESTROOM WALL

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

CT-3 SURFACE: WALL

MANUFACTURER: DALTILE

MODEL: GALLERY SLIMLITE, 12" X 24" (305 X 610 MM) UNPOLISHEDTILE

COLOR: J505 BLUE

REMARKS: ACCENT AT RESTROOM WALL

FG-1 SURFACE: FLOOR

MATERIAL: FOOT GRILLE

MANUFACTURER: MATS INC.

MODEL: ADVANCED TRACK FOOT GRILLE

COLOR: ALUMINUM WITH BOSTON KENMORE GREY INSERT

FP-1 SURFACE: WALL

MATERIAL: FIBERGLASS REINFORCED PLASTIC PANEL

MANUFACTURER: MARLITE.

MODEL: STANDARD FRP, PEBBLED SURFACE, 4’ X 10’ X 3/32”

COLOR: P 151 LIGHT GREY

REMARKS: AT WASH BAY

LK-1 SURFACE: LOCKERS

MATERIAL: POWDER COATED STEEL LOCKERS

MANUFACTURER: HADRIAN, INC.

MODEL: EMPEROR, SINGLE TIER, 12” X 72” (305 X 1829 MM)

COLOR: 535 LIGHT GREY

PLAM-1 SURFACE: MILLWORK

MATERIAL: PLASTIC LAMINATE, VERTICAL SURFACES

MANUFACTURER: FORMICA

MODEL: 1097-MC MICRODOT FINISH

COLOR: CITADEL

REMARKS: MILLWORK AT BREAK ROOM CABINETS

PLAM-2 SURFACE: MILLWORK

MATERIAL: PLASTIC LAMINATE, HORIZONTAL SURFACES

MANUFACTURER: TBD

MODEL: TBD, MATTE

COLOR: TO MATCH STEELCASE 2853 TUNGSTEN FIBER

REMARKS: COUNTER TOPS

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

PT-1 SURFACE: WALL

MATERIAL: PAINT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW7005 PURE WHITE

PT-2 SURFACE: WALL

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW7016 MINDFUL GRAY

REMARKS: FIELD COLOR

PT-3 SURFACE: WALL, ACCENT

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGGSHELL

COLOR: SW6523 DENIM

REMARKS: ACCENT COLOR AT 1ST FLOOR COLUMNS & BREAK ROOM

PT-4 SURFACE: DOOR FRAMES, TRIM

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, SEMI GLOSS

COLOR: SW7018 DOVETAIL

REMARKS: FIELD COLOR DOOR FRAMES, PAINTED DOORS AND TRIM

PT-5 SURFACE: CEILING

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, FLAT

REMARKS: GYPBOARD AND EXPOSED CEILINGS

PT-6 SURFACE: WALL, CEILING, DOORS & DOOR FRAMES

MANUFACTURER: SHERWIN WILLIAMS

MODEL: HIGH PERFORMANCE EPOXY

REMARKS: WASH BAY

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

PT-7 SURFACE: DOOR FRAMES, STAIR RAILINGS & STRINGERS

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, SEMI GLOSS

COLOR: SW6523 DENIM

REMARKS: DOOR FRAMES AT RESTROOMS & STAIRS, STAIR RAILINGS & STRINGERS

PT-8 SURFACE: WALL

MANUFACTURER: SHERWIN WILLIAMS

MODEL: PROMAR 200, EGG SHELL

COLOR: SW6066 SAND TRAP

REMARKS: WALLS AT BREAK ROOM

RB-1 SURFACE: BASE

MATERIAL: RUBBER BASE

MANUFACTURER: FORBO

MODEL: RUBBER TRADITIONAL WALL BASE, 6" (152 MM) HIGH, COVED PROFILE

COLOR: C94 DARK BISTRE

SC-1 SURFACE: FLOOR

MATERIAL: SEALED CONCRETE

MANUFACTURER: QC CONSTRUCTION PRODUCTS

MODEL: CEM-TINT CONCRETE STAIN, WITH CLEAR SEALER

COLOR: CUSTOM COLOR HC-166 & CLEAR SEALER I-18

REMARKS:

CUSTOM COLOR TO MATCH BENJAMIN MOORE HC-166

BREWSTER GRAY

SF-1 SURFACE: FLOOR

MATERIAL: ACRYLIC

MANUFACTURER: MANHATTAN

MODEL: DURALITE SHOWER TRAY

REMARKS: SHOWER PAN AT RESTROOM SHOWERS

SS-1 SURFACE: COUNTER TOP

MATERIAL: SOLID SURFACE, QUARTZ

MANUFACTURER: DUPONT

MODEL: ZODIAQ

COLOR: ANTIQUE PEARL

REMARKS: COUNTER TOP AT BREAK ROOM, RESTROOMS

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

ST-1 SURFACE: DOOR

MATERIAL: SOLID SURFACE CORE WOOD DOOR

MANUFACTURER: TBD

MODEL: BEECH WOOD

COLOR: STAIN TO MATCH STEELCASE 3614 WARM OAK

REMARKS: REFER TO FF&E PACKAGE FOR SAMPLE

ST-2 SURFACE: MILLWORK

MATERIAL: WOOD BENCH

MANUFACTURER: TBD

MODEL: BEECH WOOD

COLOR: STAIN TO MATCH STEELCASE 3614 WARM OAK

REMARKS: REFER TO FF&E PACKAGE FOR SAMPLE

SV-1 SURFACE: FLOOR

MATERIAL: SHEET VINYL

MANUFACTURER: ALTRO

MODEL: ALTRO MAXIS UNITY, (79”W X 66 LINEAR FT LONG)

COLOR: POOL UBI2503

REMARKS: FLOOR AT BREAK ROOM/KITCHEN & LAUNDRY ROOM

TP-1 SURFACE: TOILET PARTITION

MATERIAL: POWDER COATED STEEL

MANUFACTURER: HADRIAN, INC.

MODEL: FLOOR MOUNTED

COLOR: 535 LIGHT GREY

REMARKS: AT 2ND FLOOR RESTROOMS

WC-1 SURFACE: WALL COVERING

MATERIAL: WOVEN WALL TISSUE

MANUFACTURER: FLUGGER

MODEL: 45135, 1 X 50 M

REMARKS: WALLS IN CENTRAL AREAS UNDER PAINT

WT-1 SURFACE: WINDOW TREATMENT

MATERIAL: HORIZONTAL MINI BLIND

MANUFACTURER: LEVOLOR

MODEL: R1V1C RIVERA CONTRACT, 1” (25 MM) BLIND

COLOR: 116 POLAR BEAR

REMARKS: MOUNTED AT WALL SURFACE

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

ACP-1

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

CPT-1

TANDUS

LANDSCAPE COLOURS 03223, 24" X 24" (610 X 610 MM)

MODULAR TILE

65008 ELECTROPLATED

3”x7” (76 X 178 MM)

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

PT-2

SHERWIN WILLIAMS

EGGSHELL

SW 7016 MINDFUL

GRAY

2”x3”

PT-2

PT-4

SHERWIN WILLIAMS

SEMI GLOSS

SW7018 DOVETAIL

2”x3”

PT-4

PT-3 & PT-7

SHERWIN WILLIAMS

EGGSHELL & SEMI-

GLOSS

SW6523 DENIM

2”x3”

PT-3 & PT-7

PT-8

SHERWIN WILLIAMS

EGGSHELL

SW6066 SAND TRAP

2”x3”

PT-8

CG-1

PT-1, PT-5 & PT-6

PT-1 & PT-6

SHERWIN WILLIAMS

EGGSHELL & FLAT

SW7005 PURE WHITE

3”x3”

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

CT-2

CT-2

CROSSVILLE

GALLERY SLIMLITE

SHADES 12”X24”

J500 WHITE

CT-3

CT-3

CROSSVILLE

GALLERY SLIMLITE

SHADES 12”X24”

J500 WHITE

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

RB-1

RB-1

RUBBER BASE

FORBO

6” (102 MM) HIGH

C94 DARK BISTRE

CT-1 & CB-1

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

SC-1

QC

CONSTURCTION

HC-166 & CLEAR

SEALER

1-18

SV-1

ALTRO

MAXIS UNITY

SHEET VINYL

79”W X 66” L

POOL UBI2503

PLAM-1

JOHNSONITE

AZROCK TEXTILE VCT,

12" X 24" (305 X 610 MM)

PLANK

V-280 RAW SILK

2”x2”

PLAM-1

SC-1 SV-1

PLAM-2

TBD

TO MATCH

STEELCASE/COALESSE

2862 STUCCO FIBER

PLAM-2

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

WT-1

LEVOLOR

116 POLAR BEAR

WT-1

WC-1

FLUGGER

WHITE

WC-1

FP-1

MARLITE

P 151 LIGHT GREY

FP-1

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

SS-1

CORIAN

LAVA ROCK

SS-1

LK-1 & TP-1

SF-1

SF-1

FIAT

TERRAZZO

081 BLACK & WHITE

4”x4”

Arlington, VA 22201 POC: Anita Bowman P: 571-218-1374 F: 571-218-1400

Project No: FDWD5945

FG-1

MATS INC.

ADVANCED TRACK FOOT

GRILLES

ALUMINUM WITH BOSTON

KENMORE GREY INSERT

1.3 Interior Finish Cut Sheets

corridor 400 demountable self-supporting ceiling sizes 400 x 1200 x 9.5 mm 400 x 1500 x 9.5 mm 400 x 1800 x 9.5 mm 400 x 2100 x 9.5 mm 400 x 2400 x 9.5 mm 400 x special length (900 - 2400) x 9.5 mm surface standard white painted surface (closest match ral 9003, gloss 5) other colours available on request edge d (rebated and grooved edge) self-supporting with visible trim at the short ends perforation globe: 10.6% Quadril: 14.2% micro: 10.6% tangent: 21.6% also available as regula.

other perforation patterns are manufactured to order.

globe, Ø6 mm, 15 mm c/c Quadril, 12 x 12 mm, 30 mm c/c micro, 3 x 3 mm, 8.3 mm c/c tangent, 4 x 14 mm, 10/20 mm c/c millernl Text Box

ACP-1

1,0

0,8

0,6

0,4

0,2

0,0 α

Hz 400020001000500250125 α 0,65 0,80 0,65 0,55 0,450,45 α 0,60 0,70 0,65 0,60 0,450,45 α 0,55 0,65 0,60 0,60 0,550,40 α 0,65 0,80 0,75 0,75 0,750,45 α 0,20 0,10 0,05 0,05 0,050,40 danish indoor climate labelling (dim) indoor value: 10 days particle emission: low (< 0.75 mg) cleaning dust is removed using a dry duster or vacuum cleaner. marks can be removed with a damp cloth using normal cleaning practices and neutral cleaning solutions.

ambient conditions the product is designed to perform under normal conditions of use. tested at 90% rH and 30°c. the product can withstand ambient temperatures of up to 50°c.

light reflection globe: 72.8% Quadril: 75.1% micro: 72.1% tangent: 70.9% regula: 82.6% load-bearing capacity g, Q, m, r: 1 / a / no load g, Q, m, r: 2 / a / 30n g, Q, m, r: 2 / b / no load fire class full-perforated: a2-s1,d0 part-, non-perforated: b-s1,d0 robustness made of robust, glass fibre reinforced material with excellent pressure resistance.

under normal conditions of use, the product properties are preserved and there is no decomposition of material over time.

corridor 400 perforation tile weight (kg/m2) transportation weight (kg/m2) installed weight (kg/m2) globe 9.5 10.0 10.8

Quadril 9.4 9.9 10.7 micro 9.5 10.0 10.8 tangent 8.2 8.6 9.4 regula 10.4 10.9 11.7 edge d (rebated and grooved edge) self-supporting with visible trim at the short ends certificates

• declaration of conformity

(en 14190)

• danish indoor climate labelling acoustics for acoustic data on alternative constructions please see “absorption data” at knaufdanoline.com globe, 200 mm suspension, no mineral wool αw: 0.60, nrc: 0.65 Quadril, 200 mm suspension, no mineral wool αw: 0.60, nrc: 0.65 micro, 200 mm suspension, no mineral wool αw: 0.65, nrc: 0.65 tangent, 200 mm suspension, no mineral wool αw: 0.80, nrc: 0.75 regula, 200 mm suspension, no mineral wool αw: 0.10, nrc: 0.05

1,0

0,8

0,6

0,4

0,2

0,0 α

Hz 400020001000500250125 α 0,95 0,95 0,90 0,90 0,950,75

1200/1500/1800/2100/2400

PERFORATION DETAILS

ABSORPTION COEFFICIENTS

At 200 mm and with 50 mm mineral wool

Perforation type Tangent - 4x14 mm oval holes

Perforation percentage 21,6 %

Perforation pattern T1

Frequency (Hz) 125 250 500 1000 2000 4000

�p 0,75 0,95 0,95 0,90 0,90 0,95

CORRIDOR 400 TANGENT - PERFORATION DATA

SPECIFICATION DOCUMENT

Description: 9.5 x 400 x 1200-2400 mm high grade, glass fibre reinforced, acoustic, white painted, gypsum panel with acoustic perforation as Tangent - oval 14x4mm c/c 20mm/10mm type T or Micro - square 3x3mm c/c 8.33mm type M or Quadril - square 12x12mm c/c 30mm type Q or Globe - round Ø6mm c/c 15mm type G or Regula - plain unperforated

Corridor 400 panels are with integrated metal profile on the back, to be installed in free span without suspension hangers.

The tiles are furnished with a grey/white absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).

Colour: White, NCS 0701 Y24R, gloss 5 (standard)

– Closest match for repainting: NCS 0700/RAL 9003.

Paint type: Waterbased acrylic emulsion paint including titanium for hygienic indoor climate.

Light Reflection: 82.6% according to DIN Norm 5036

Acoustic Properties:

Globe: αw: 0,60; NRC: 0,65 Quadril: αw: 0,60; NRC: 0,65 Micro: αw: 0,65; NRC: 0,60 Tangent: αw: 0,80; NRC: 0,75 Suspended 200 mm

Fire Class: Full perforated – A2-s1,d0 Part-, non-perforated – B-s1,d0

Suspension: The flex-profile is an integrated part of the Corridor ceiling plank. The suspension system from approved manufacturers consists of reinforced wall angles and 38mm main runners are used between sections and lines of Corridor planks.

Characteristics: The panels shall be:

Manufactured from high grade non-combustible glass fibre reinforced gypsum board produced according to EN 520.

Tested to meet the safety requirements of EN 14190.

Tested in accordance with EN 13501-1 to achieve minimum fire classification B-s1,d0.

Resistant to 90% RH and short term exposure for higher humidity.

Non hazardous and fully recyclable.

(800) 233-8493 • www.c-sgroup.com Page 1 - June 2010

SUGGESTED SPECIFICATIONS

SECTION 10 26 00

C/S Acrovyn® Model SCO-8

Part 1 - General

1.01 Summary

A. This section includes the following types of wall protection systems:

1. Corner Guards

B. Related sections: The following sections contain requirements related to this section:

1. Handrails, Bumper Guards, Crash Rails, Accent Rails, Wall Covering, Wall

Panels, Door Protection; refer to section 10 26 00 “Wall and Door Protection”

2. Blocking in walls for fasteners; refer to section 09 22 00 “Supports for Plaster and Gypsum Board”

1.02 References

A. American Society for Testing and Materials (ASTM)

1.03 Submittals

A. General: Submit the following in accordance with conditions of contract and Division 1 specification section 01 33 00 “Submittal Procedures”.

B. Product data and detailed specifications for each system component and installation accessory required, including installation methods for each type of substrate.

C. Shop drawings showing locations, extent and installation details of corner guards.

Show methods of attachment to adjoining construction.

D. Samples for verification purposes: Submit the following samples, as proposed for this work, for verification of guard.

1. 12" (304.8mm) long sample of each model specified.

E. Product test reports from a qualified independent testing laboratory showing compliance of each component with requirements indicated.

F. Maintenance data for wall protection system components for inclusion in the operating and maintenance manuals specified in Division 1.

1.04 Quality Assurance

A. Installer qualifications: Engage an installer who has no less than 3 years experience in installation of systems similar in complexity to those required for this project.

B. Manufacturer’s qualifications: Not less than 5 years experience in the production of specified products and a record of successful in-service performance.

C. Single source responsibility: Provide all components of the wall protection system manufactured by the same company to ensure compatibility of color, texture and physical properties.

1.05 Delivery, Storage and Handling

A. Deliver materials to the project site in unopened original factory packaging clearly labeled to show manufacturer.

B. Material must be stored flat.

1.06 Project Conditions

A. Installation areas must be enclosed and weatherproofed before installation commences.

millernl

CG-1

(800) 233-8493 • www.c-sgroup.com Page 2 - June 2010

Part 2 - Products

2.01 Manufacturers

A. Interior surface protection products specified herein and installed on the submittal drawings shall be manufactured by Construction Specialties, Inc.

2.02 Materials

A. Stainless steel: To be type 304 alloy with #4 satin finish.

B. All necessary fasteners to be supplied by the manufacturer.

2.03 Corner Guards

A. Stainless steel corner guards to be by Construction Specialties: Surface mounted guards to be 16 gauge stainless steel.

1. Model SCO-8 Stainless steel corner guard for end wall conditions mounted with construction adhesive standard; stainless steel screws optional. Specify required dimensions. Optional powder coat finish for stainless steel components available; select from one of (8) powder coat finishes.

2.04 Fabrication

A. General: Fabricate wall protection systems to comply with requirements indicated for design, dimensions, detail, finish and member sizes.

B. Preassemble components in shop as much as possible to minimize field assembly.

2.05 Finishes

A. General: Comply with NAAMM "Metal Finishes Manual" for recommendations relative to applications and designations of finishes.

Part 3 - Execution

3.01 Examination

A. Verification of conditions: Examine areas and conditions under which work is to be performed and identify conditions detrimental to proper or timely completion.

1. Do not proceed until unsatisfactory conditions have been corrected.

3.02 Preparation

A. Surface preparation: Prior to installation, clean substrate to remove dirt, debris and loose particles. Perform additional preparation procedures as required by manufacturer’s instructions.

B. Protection: Take all necessary steps to prevent damage to material during installation as required in manufacturer’s installation instructions.

3.03 Installation

A. Install the work of this section in strict accordance with the manufacturer’s recommendations, using only approved mounting hardware, and locating all components firmly into position, level and plumb.

3.04 Cleaning

A. General: Immediately upon completion of installation, clean material in accordance with manufacturer’s recommended cleaning method.

B. Remove surplus materials, rubbish and debris resulting from installation as work progresses and upon completion of work.

3.05 Protection

A. Protect installed materials to prevent damage by other trades. Use materials that may be easily removed without leaving residue or permanent stains.

INFINITY #05849

Product Specification Sheet

Face Construction Imperial Metric Construction Level Loop Face Weight 20 oz/sq yd 678 g/sq m Gauge 1/13 50.4 rows/10 cm Stitches per Inch 9.5 37.4 pu/10 cm Tuft Density 121.6 tufts/sq in 18.8 tufts/sq cm Pile Height Average 0.117 inch 3.0 mm Pile Thickness 0.068 inch 1.7 mm Density Factor 10,588 oz/cu yd 391.8 kg/cu m Fiber System Antron® Legacy Nylon Dye Method 60% Solution Dyed / 40%Yarn Dyed Soil/Stain Protection Ensure 10.4 Kilotex Primary Tufting Substrate Synthetic Non-Woven Pattern Match N/A

Third Party Environmental Certifications Product

Overall SCS Certified Certified ER3® Modular 45-67% Certified Powerbond® ethos® Cushion 37-62% Certified ethos® Modular 26-52% Certified Powerbond® Cushion 7-32% Certified Flex-Aire® Cushion Modular 21-40% Certified Powerbond® Medfloor® 7-31% *Minimum recycled content certified by SCS and varies by product style.

Product Testing/Information Antimicrobial Chemicals No antimicrobials (EPA Registered pesticides) added to product (ASTM E2471-05) Electrostatic Propensity 2.0 kV (AATCC 134); Permanent Conductive Fiber Surface Flammability Passes CPSC FF 1-70 (ASTM D-2859) Flooring Radiant Panel Class 1 (mean average CRF: 0.45 w/sq cm or higher) (ASTM E-648) Smoke Generation Less than 450 (ASTM E-662) Colorfastness to Light > 4 after 60 hours (AATCC 16E) Fluorine Minimum 200 ppm (CRI TM-102)

Installation Methods Peel and Stick RS Adhesive System - Full Coverage Peel & Stick Wet Spread Backing specific Tandus Adhesives Installation Method Monolithic

Product Notes

1. Specifications are subject to nominal manufacturing variances. Material supply and/or manufacturing processes may necessitate changes without notice. Colors may vary slighlty from dye lot to dye lot.

2. U.S. Patent numbers: 4,849,297; 4,49,267; 5,728,741; 5,855,981; 5,914,353; 6,406,574

3. The use of chair pads under roller caster chairs may be required in order to maintain full limited warranty coverage.

Please refer to the applicable limited warranty verbiage for specific requirements. In all cases, chair pads are recommended for optimum textural performance. Absent the use of chair pads, more intensive maintenance will be required for areas in direct contact with chair caster traffic, and some degree of appearance change is to be expected.

NSF 140

Platinum Platinum

Recycled Content* Post-Consumer

20% 37%

Platinum

800.248.2878 tandus.com

20% 7% Gold 4% Gold 7% millernl

Product Construction

Modular Options

IMPERIAL TEST METHOD

Warranty: 15 year limited warranty against excessive surface wear, static, delamination, edge ravel, zippering & backing resiliency loss.

ER3® Modular Total Minimum Recycled Content 52.6% Pre-Consumer: 28.9% Post-Consumer: 23.7% SCS Certified total 45-67% Third Party Certfication NSF-140 Platinum SCS Certified Product Size 24" x 24" Tile (18" x 18" and 36" x 36" also available) Secondary Backing 100% Recycled Content with Tru Bloc (Barrier System) Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Secondary Backing Density 65 lbs/cu ft 1041 kg/cu m Secondary Backing Thickness 0.087 inch 2.2 mm Total Weight with RS / Non-RS 130.5 128.9 oz/sq yd +/-5% 4425 4371 g/sq m CRI Green Label Plus Certification GLP1366 ethos® Modular Total Minimum Recycled Content 32.0% Pre-Consumer: 7.8% Post-Consumer: 24.2% SCS Certified total 26-52% Third Party Certfication NSF-140 Platinum SCS Certified Product Size 24" x 24" Tile (18" x 18" and 36" x 36" also available) Secondary Backing 50% Recycled Content Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Secondary Backing Density 65.0 lbs/cu ft 1041 kg/cu m Secondary Backing Thickness 0.050 inch 1.3 mm Total Weight 97.2 oz/sq yd +/-5% 3296.4 g/sq cm CRI Green Label Plus Certification GLP8320

Flex-Aire® Cushion Modular Total Minimum Recycled Content 24.6% Pre-Consumer: 19.1% Post-Consumer: 5.5% SCS Certified total 21-40% Third Party Certfication NSF-140 Gold SCS Certified Product Size 24" x 24" Tile (18" x 18" and 36" x 36" also available) Secondary Backing Fiberglass Reinforced Composite Closed Cell Cushion Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Cushion Weight 35.5 oz/sq yd 1203 g/sq m ASTM D-3574 Cushion Density 18.5 lbs/cu ft 296 kg/cu m ASTM D-3574 Cushion Thickness 0.156 inch 4.0 mm ASTM D-3574 Total Weight with RS / Non-RS 119.1 117.7 oz/sq yd +/-5% 4039 3991 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 5 Min. 25 max lbs/sq inch @ 25% 352 1758 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP6558

Conserv® Modular Product Size 24" x 24" Tile (18" x 18" and 36" x 36" also available) Secondary Backing Thermoplastic Polymeric Intermediate Layer Fiberglass Reinforced Sealant Product Construction No Delamination per ASTM D-3936 Secondary Backing Density 120 lbs/cu ft 1922 kg/cu m Secondary Backing Thickness 0.041 inch 1.0 mm Total Weight 97.2 oz/sq yd +/-5% 3296 g/sq cm CRI Green Label Plus Certification GLP1366

800.248.2878 tandus.com 4/13

METRIC

Product Construction

Powerbond Options

IMPERIAL METRIC TEST METHOD

Warranty: 25 year non-prorated limited warranty against excessive surface wear, static, delamination, edge ravel, zippering & backing resiliency loss.

Powerbond ethos® Cushion Total Minimum Recycled Content 41.4% Pre-Consumer: 0% Post-Consumer: 41.4% SCS Certified total 37-62% Third Party Certification NSF-140 Platinum SCS Certified Product Size 6 ft. 1.8 m Cushion 76% Recycled Content Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Density 32 lbs/cu ft 513 kg/cu m ASTM D-3574 Cushion Thickness 0.100 inch 2.5 mm ASTM D-3574 Total Weight with RS / Non-RS 91.0 88.6 oz/sq yd +/-5% 3086 3005 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 29 lbs/sq inch @ 25% 2039 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP8320

Powerbond Cushion Total Minimum Recycled Content 8.2% Pre-Consumer: 0% Post-Consumer: 8.2% SCS Certified total 7-32% Third Party Certification NSF-140 Gold SCS Certified Product Size 6 ft. 1.8 m Cushion Closed Cell Cushion Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Weight 35.5 oz/sq yd 1203 g/sq m ASTM D-3574 Cushion Density 18.5 lbs/cu ft 296 kg/cu m ASTM D-3574 Cushion Thickness 0.156 inch 4.0 mm ASTM D-3574 Total Weight with RS / Non-RS 81.0 78.7 oz/sq yd +/-5% 2747 2669 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 7 Min. 25 max lbs/sq inch @ 25% 492 1758 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP9744

Powerbond Medfloor® Total Minimum Recycled Content 8.4% Pre-Consumer: 0% Post-Consumer: 8.4% SCS Certified total 7-31% Product Size 6 ft. 1.8 m Cushion Medfloor Heterogeneous Construction No Delamination per ASTM D-3936 Cushion Weight 37 oz/sq yd 1254 g/sq m ASTM D-3574 Cushion Density 36 lbs/cu ft 577 kg/cu m ASTM D-3574 Cushion Thickness 0.085 inch 2.2 mm ASTM D-3574 Total Weight with RS / Non-RS 82.9 80.2 oz/sq yd +/-5% 2812 2720 g/sq m Compression Set Max. 10% ASTM D-3574 Compression Deflection 29 lbs/sq inch @ 25% 2039 g/sq cm ASTM D-3574 CRI Green Label Plus Certification GLP9744

800.248.2878 tandus.com

4/13

Powerbond® (VCTT Sheet Flooring)

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

AV241 Frost UPS 4% Recycled content

AV247 Haze UPS 20% Recycled content

SBC1/.10103HMOS

Warm Grays

(AV243, AV245, AV247)

SBC2/.10212MT Shine

SBC1/.10212MT Luster

AV242 Vapor UPS 4% Recycled content

AV248 Thunder UPS 20% Recycled content

SBC2/.10103HMOS

Cool Grays

(AV244, AV246, AV248)

AV243 Fog UPS 4% Recycled content

AV249 Ink UPS 20% Recycled content

SBC3/.10103HMOS

Whites

(AV241, AV242)

AV244 Mist UPS 4% Recycled content

AV245 Clay UPS 20% Recycled content

AV246 Ash UPS 20% Recycled content

• Minimum 4% third-party certified pre-consumer recycled content

• Honed mosaics and metallic borders add design versatility and aesthetic appeal

• Cross-Sheen® finish for easy cleaning available on UPS only

• Comprised of nine contemporary colors

• Rectified and designed to be modular with a minimum 3mm grout joint

• Features subtle linear pattern. This patterncan run in the same direction or alternate to provide greater visual texture

Features and Benefits

Mosaic blends available* 1 x 3 Mosaic Border**

Color Palette

AV241 Frost HON 4% Recycled content

AV242 Vapor HON 4% Recycled content

AV243 Fog HON 4% Recycled content

AV244 Mist HON 4% Recycled content

AV245 Clay HON 20% Recycled content

AV246 Ash HON 20% Recycled content

AV247 Haze HON 20% Recycled content

AV248 Thunder HON 20% Recycled content

AV249 Ink HON 20% Recycled content

* Honed finish only.

** Globally sourced.

Shades by Crossville™

Crossville’s Hydrotect process is available on all Shades by Crossville™ tiles for an additional charge*. The Hydrotect process makes the tile to which it is fired have antimicrobial effects and be self-cleaning and air purifying.

Visit CrossvilleInc.com/Hydrotect for more information and availability of adding Hydrotect to our tile.

* Mounted tiles are not available with Hydrotect process.

millernl

CB-1, CT-1

Crossville, Inc. • P.O. Box 1168, Crossville, TN 38557 • Phone: 931.484.2110 • Fax: 931.456.2956 • E-Mail: Crossc@CrossvilleInc.com • CrossvilleInc.com

Mosaic & Mosaic Border Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

1 x 3 Mosaics* 297 x 297 10.5 HON

1 x 3 Mosaics Border** 47 x 334.5 10.5 Metallic

* 1 x 3 honed mosaics mesh mounted in 11-7/8 x 11-7/8 sheets.

** Mounted on a 2 x 13 sheet. Globally sourced.

Sizes & Finishes Field Tile Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

6 x 24 147 x 597 10.5 UPS/HON

12 x 24 297 x 597 10.5 UPS/HON

24 x 24 597 x 597 10.5 UPS/HON

Note: All field tile is rectified and modular with a minimum 3mm grout joint.

Product Performance

Breaking Strength >500 lbf ASTM C648

Bond Strength >200 psi ASTM C482

Chemical Resistance Unaffected ASTM C650

Frost Resistance Resistant ASTM C1026

Water Absorption <0.20% ASTM C373

Scratch Hardness 7 Mohs Scale

Static Coefficient of Friction

UPS Dry ≥0.8 ASTM C1028

UPS Wet ≥0.6 ASTM C1028

HON Dry ≥0.6 ASTM C1028

HON Wet n/a ASTM C1028

Wet Dynamic COF (wet slip potential)

UPS 0.50 – 0.60 DCOF AcuTest™

HON 0.42 – 0.52 DCOF AcuTest™

6 x 24

24 x 24

12 x 24

Sizes (Shown in AV248 Thunder UPS)

Shade & Texture Index

Shades by Crossville™ has a shade variation of V2.

4 x 24 Bullnose 6 x 12 Cove Base

Coordinating Trim Available in all colors

Nominal (in) Actual (mm) Thickness (mm) Finish

4 x 24 Single Bullnose

97 x 597 10.5 UPS/HON

6 x 12 Cove Base

150 x 297 10 UPS

Shades by Crossville™

V2 V3 V4V1 V1 Uniform appearance V2 Slight Variation V3 Moderate Variation V4 Substantial Variation

This porcelain tile product is produced with a V2 variation. Differences among pieces from the same production run are minimal. Inspect the product upon delivery and for best results, blend tile from several cartons during installation.

Our Porcelain Stone® products are available in popular plank shapes with no minimum order and quick fulfillment. Depending on the product, there are up to 4 widths and 7 lengths, creating more than 2,796 combinations.

Get Planked!

F S -S

H A D E S -13

Environmentally AwareTrade Organizations

Shades by Crossville™ contains a minimum of 4% pre-consumer recycled content and is manufactured by Crossville® using processes that have been certified by Scientific Certification Systems. SCS has verified that through these recycling processes Crossville recycles nearly 12 million pounds of previously discarded filtrate and fired tile waste.

In addition to its own fired waste recycling, Crossville also accepts and recycles reclaimed, previously installed tile through its Tile Take- Back™ Program. For more information, visit CrossvilleInc.com/green

Environmentally ConsciousRecommended Use

Shades by Crossville™ is recommended for interior floors, walls, countertops, and exterior walls in both residential and commercial applications. Shades by Crossville™ is not recommended for exterior horizontal surfaces or exterior paving. The honed field tile is not recommended for wet areas where standing water may occur. If offset pattern is required for tiles 18 inches or longer, Crossville® recommended an offset of not greater than 33%.

See CrossvilleInc.com for detailed installation instructions.

Shades by Crossville™ Crossville, Inc. PO Box 1168 Crossville, TN 38557

Phone 931.484.2110 Fax 931.456.2956 E-Mail Crossc@CrossvilleInc.com Web CrossvilleInc.com

Crossville is pleased to offer our extensive line of award-winning Porcelain Stone floor and wall tile and our beautiful line of accent tiles to government customers at GSA pricing.

Located in Crossville, Tennessee, we have an industry-leading logistics system to ensure you get your tile when and where you need it, on time and on budget.

For over 20 years we have been offering Porcelain tile to commercial customers at National Accounts pricing programs with special discounts. The National Accounts department provides materials forecasting, sales support and samples.

GSA Pricing

Programs

Class Act

Created as a comprehensive solution for educational facilities, Class Act not only offers versatility in design, but also provides the assurance that comes with buying American-made products from a proven provider.

Exterior Cladding

Crossville’s Porcelain Stone® Exterior Cladding Systems are suitable for virtually any conventional masonry application. When used in conjunction with our exterior cladding systems, Crossville’s Porcelain Stone offers clear advantages: decreased construction costs, less site disturbance, low-to-zero maintenance after installation, accelerated construction schedules and greater strength than traditional masonry.

Crossville Inc. guarantees that its products will meet or exceed the performance specifications outlined in ANSI A137.1-2008 and in the performance data section of the Crossville, Inc. general product catalog. For complete details check our website at CrossvilleInc.com.

Our Warranty

National Accounts

Sample fulfillment & Help Line Samples@CrossvilleInc.com 1 800 221.9093

Loose Samples for Architects & Designers

Loose Tile Samples Sizes may vary depending on product series Max. of 4 large field tile per order

Replacement Chips for PSS Rack Max. of 5, 2 x 2 chips per color

Standard Shipping UPS Ground

Information listed here is subject to change.

Please refer to CrossvilleInc.com for the latest, most accurate information.

Crossville® Sample Express

Regular cleaning is the best way to keep Shades by Crossville™ tile looking good for years to come. Use clean, hot water (combined with a household cleaner for more aggressive cleaning).

Rinse thoroughly and dry with a soft cloth. No waxes are needed. More information regarding the care and maintenance of Crossville® products is available at CrossvilleInc.com.

Care and Maintenance Crossville® produces the Shades by Crossville™ mosaics with the honed (HON) finish and the AcuTestsm Wet Dynamic COF ≥ .42. Their small sizes ensure frequent grout joints which provides traction and drainage.

Crossville cannot control situations involving incorrect installation, improper slope to the drain for elimination of standing water and poor surface cleaning.

This information is provided so that customers may make a realistic and informed decision when comparing Shades by Crossville to other tile products in wet area environments, such as residential/commercial bathrooms, showers, and interior pool decks.

Wet Tile Use

AV249 Ink 6 x 24 Honed AV249 Ink 12 x 24 UPS gallery™ colorbody™ porcelain floor slimlite™ glazed porcelain wall glazed ceramic wall

(1), (2), and (3), indicate Price Groups, (1) being the least expensive. *Yellow is not available in wall items.

FLOOR & WALL COLORS

YeLLOW J501* (1)

Red J504 (3)

ORAnge J503 (2)

BLue J505 (2)

BLACk J506 (1)

WHITe J500 (1)

LIme J502 (1) millernl

CT-2 & CT-3

Designed to help earn LEEDTM Credits.

At Daltile, we help make it easier for you to earn points toward LEEDTM certification so you don’t have to compromise your design for any reason. We use recycled materials in many of our products and have multiple manufacturing facilities providing the potential to be within 500 miles of your projects. For detailed information, visit daltilegreenworks.com gallery™ colorbody™ porcelain floor slimlite™ glazed porcelain wall glazed ceramic wall

SIZeS

Sq. Ft. Per Carton

Pieces Per Carton

24 x 24 Floor Tile (Polished & Unpolished)

(23-1/2” x 23-1/2”) (59.55 cm x 59.55 cm) 11.44 3

12 x 24 Floor Tile/Accents (Polished & Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 13.34 7

12 x 24 Ridged Accent (Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 11.44 6

23-1/2 x 27 Hexagon (Unpolished)

(23-1/2” x 27-1/8”) (59.55 cm x 68.76 cm) 9.87 3

12 x 24 Wall Tile (Polished & Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 11.44 6

12 x 24 SlimLite™ Wall Tile (Unpolished)

(11-11/16” x 23-1/2”) (29.75 cm x 59.55 cm) 20.96 11

12 x 36 Wall Tile/Accents (Polished & Unpolished)

(11-11/16” x 35-1/4”) (29.75 cm x 89.46 cm) 11.46 4

6 x 36 Wall Tile (Polished & Unpolished)

(5-13/16” x 35-1/4”) (14.74 cm x 89.46 cm) 11.32 8

TRIm

Type Number Size Pieces per carton

Bullnose S-43F9 3 x 24 18

Bullnose S-43C9 3 x 12 29

FLOOR COLOR AVAILABILITY

COLOR

Hexagon

Unpolished 24 x 24

Unpolished 24 x 24 Polished

12 x 24 Unpolished

12 x 24 Polished

12 x 24 Unpolished

Ridged

12 x 24 Polished Grooves

12 x 24 Polished

Mini-Grooves

White

Yellow

Lime

Orange

Red

Blue

Black

WALL COLOR AVAILABILITY

COLOR

12 x 36

Unpolished 12 x 36 Polished

12 x 36 Unpolished

Ruled 6 x 36

Unpolished 6 x 36

Polished 12 x 24

Unpolished 12 x 24 Polished

12 x 24 Unpolished SlimLite™

White

Yellow

Lime

Orange

Red

Blue

Black

(Floor & SlimLite™ only)

InSTALLATIOn

Thickness Grout Joint Recommendation Shade Variation

3/8” - Floor, 12 x 24 Wall & Decos 7/16” - 12 x 36 & 6 x 36 Wall

3/16” - SlimLite™ Wall

1/8” (3/16” when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%) Low (V1)

TeST ReSuLTS FLOOR WALL

ASTM# UNPOLISHED POLISHED SLIMLITE™ WALL TILE & DECO

Water Absorption C373 < 0.5% < 0.5% < 0.5% < 11.0%

Breaking Strength C648 > 400 lbs > 400 lbs > 100 lbs > 200 lbs

Scratch Hardness MOHS 8.0 8.0 6.0 6.0

Chemical Resistance C650 Resistant Resistant Resistant Resistant

Coefficient of Friction C1028 Wet: ≥ 0.60 Dry: ≥ 0.70

Wet: ≥ 0.50 Dry: ≥ 0.60 - - - -

APPLICATIOn InTeRIOR eXTeRIOR

Residential Light

Commercial Commercial Residential Commercial

Floors/Patios* ** **

Walls/Backsplashes

Countertops

Pool Decking

Pool Lining

Suitable for exterior walls in freezing and non-freezing climates when proper installation methods are followed.

*Floor tile only **Unpolished Only nOTeS

Special care should be taken when grouting with dark pigmented colors. A grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface.

Special care needs to be given when installing tiles 20” and larger. Please refer to www.daltile.com/LargeTiles for information.

Depth VV or AD Frame (New Construction)

TT Overlap Frame (Retrofits)

Grille Only 1-1/2" 1-1/2"

Grille & Frame (Level Base) 1-5/8" 1-1/2"

Grille & Frame (Drain Pan) 2-1/2" 2-1/2"

AD FRAMETT OVERLAP FRAMEVV EMBEDDED FRAME

2' Span 2'8" Span 3'6" Span

3,831 2,653 1,583

Maximum Rolling Load Pounds per wheel for Level Base Installation

Level Base Installation Options For Advanced Track, Dual Track and Dri Track

Features Zones

Exclusive, cross bolt technology outlasts traditional welded key-lock construction Heaviest rolling load in the industry Anti-slip surface for indoor applications; ADA compliant Wide variety of Designer Insert Options available Custom shapes available Advanced Track and Dri Track can be radius cut Frames come pre-assembled Drain pan option available Common Uses–office buildings, retail stores, malls, supermarkets, hospitals, schools, libraries, airports

Specifications

Advanced Track Material Heavy gauge 6061-T6 aluminum with aluminum alloy 6063-T5 scraping rails and standard 100% nylon fiber drying inserts. 58.62% pre-consumer and 15.5% post-consumer recycled content. Recycled content varies with Designer Insert Options.

Dual Track Material Heavy gauge 6061-T6 with 43.97% pre-consumer and 14.12% post-consumer recycled content, aluminum with vinyl scraping and standard 100% nylon drying inserts. Vinyl scraper bars available in black, gray and brown. Recycled content varies with Designer Insert Options.

Dri Track Material Heavy gauge 6061-T6 aluminum with standard 100% nylon fiber drying inserts. 51.84% pre-consumer and 14.86% post-consumer recycled content. Recycled content varies with Designer Insert Options.

Style Scraping and drying surface with bolted cross supports Size Custom made to your requirements. Consult our Product Specialists for assistance.

Maximum Panel Size 48" (front and back) x 42" (left to right) Multiple panels are used to construct the foot grille system

Possible LEED Credits

MR Credit 2 (1 point) MR Credit 4 (1-2 points) MR Credit 5 (1-2 points) IEQ Credit 5 (1 point)

1 2 3 4 miVantage™ Heaviest rolling load in the industry with a wide selection of Designer Insert Options

Advanced Track, Dual Track and Dri Track

Boston-Kenmore High durability nylon fibers (6.6)

NaturTile™ Designer nylon fibers (6.6)

Brown Charcoal

Gray Blue

Boston-Fenway High durability nylon fibers (6.6)

Brown Charcoal

Gray Blue

Slate Ocean

Earth Meadow

See Page

See Page

See Page

Dri Track D e ep R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

EN

TR

A N

C

E SY

STEM

S &

M A

T

TIN

G

FO

O T G

R

ILLES

millernl

D esign er Ins er t O pt io ns Enhance the beauty of the entrance system by matching Zone 3 (lobby) matting with the Foot Grille Designer Inserts in Zone 2 (vestibule). Coordinating Zone 3 matting product pages are referenced below.

Dual Track D e ep R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

Blue Red Charcoal Dark Gray

Cocoa Charcoal Splash

Commuter rail application takes on the traffic of the entire city of Chicago

Brown

New York Collection Premium high durability nylon fibers (6.6)

Supreme Nop Aggressive and attractive polypropylene fiber

Tweed Brown Sable Brown Natural Autumn Red Spruce

Sapphire Black Walnut Midnight Blue Charcoal Dark Gray

See Page

See Page

Advanced Track D e e p R e cess e d Sys tem roo TTrraacckkPPro TTrack SeriesS

Pro Track Series

ENTRANCE SYSTEMS & MAT TING FOOT GRILLES

Th e cl ea n lin es du ra bi lit y an d sm oo th qu ie t op er at io n of

E m pe ro r lo ck er s m ak e th em t he i de al ch oi ce f or v ir tu al ly e ve ry f ac ili ty

A va ila bl e in a w id e ra ng e of s iz es ti er s an d de si gn er c ol or s, E m pe ro r lo ck er s ar an at tr ac ti ve an d ef fe ct iv e st or ag e so lu ti on

Ea ch lo ck er b ui lt s ha ll ha ve a d oo r m ou nt ed in a f ra m e.

In di vi du al t op

, b ot to m

, s id e, b ac k, s he lv es

, w it h a co m m on s id e se pa ra ti ng c om pa rt m en ts

H ad ri an

EM

PE

RO

R" l oc ke rs a re w ar ra nt ed f or a p er io d of t w o ye ar s ag ai ns t de fe ct iv e pa rt s an d w or km an sh ip

, e xc lu di ng v an da lis m a nd im pr op er in st al la ti on

A ll lo ck er p ar ts s ha ll be m ad e of m ild c ol d ro lle d sh ee t st ee l fr ee f ro m s ur fa ce i m pe rf ec ti on s an d co nt am in an ts w hi ch w ou ld b e de tr im en ta l to t he a cc ep ta nc e of a h ig h gr ad e hy br id e po xy p ol ye st er po w de r fi ni sh

. A t a sl ig ht e xt ra c os t, lo ck er p ar ts m ay b e m ad e fr om g al va nn ea l s te el . A ss em bl y fa st en er s sh al l b e zi nc p la te d fl at h ea d sc re w s w it h he x nu ts . R iv et s (A dv el

-0

3)

/1

6" a lu m in um d om e he ad 8-d om e w it h st ee l s ha ft a re a ls o av ai la bl e up on r eq ue st

D oo rs s ha ll be o f a do ub le -p an d es ig n co ns is ti ng o f a g au ge o ut er p an el w el de d to a ga ug e in ne r pa ne l t o fo rm a ri gi d bo x co ns tr uc ti on th at re si st s p ry in g.

T he o ut er p an el to b e do ub le fl an ge d on a ll fo ur ed ge s an d th e in ne r pa ne l s in gl e fl an ge d on a ll fo ur e dg es , p ro vi di ng e xt ra or di na ry r ig id it y w he n bo th pa ne ls a re w el de d to ge th er

. A s tr uc tu ra l a nd s ou nd d ea de ni ng

(2 5m m ) c el l h on ey co m b co re is b on de d to t he in ne r su rf ac es

. T he d oo r sh al l b e fl us h w it h th e fr am e an d in cl ud e a re ce ss ed h an dl e an d re ce ss ed nu m be r pl at e, b ot h of w hi ch e lim in at e pr ot ru di ng p ar ts

A s an u p ch ar ge o pt io n, d oo rs m ay b e co ns tr uc te d w it h a g au ge o ut er p an el

. D oo rs a re h in ge d on t he r ig ht a nd s w in g fr om le ft t o ri gh t.

w w w h a d r i a n i n c c o m

L O

C K

E R

S

Q ua lif ic at io ns o f al te rn at iv e lo ck er s w ill b e ev al ua te d on ly i f th ey a re s ub m it te d w it h su pp or ti ng do cu m en ts t o sh ow t ha t th ey a re e qu al t o or b et te r th an t he se s pe ci fi ca ti on s ta nd ar ds

Q u a l i f i c a t i o n s

P a r t

G n e r a l

P a

P o d u c t s

K n o c k d

D o w n

C n s t r u c t i o n

A ll m at er ia ls a re c om pl et el y as be st os f re e.

T he p ai nt u se d sh al l b e a po w de r co at in g co m pl et el y fr ee o f al l le ad a nd c hr om at e.

C h e m i c a l a f e t y

M a t e r i a l s

W a r r a n t y

D o o r s

E m p e r o r c o r r i d c k e r s to ile t p ar ti ti o n s an d lo ck er s

S p e c i f i c a t i o n s c t i n

Bo th v er tic al m em be rs s ha ll be n ot le ss t ha n g au ge a nd f or m ed in to a r ig id c ha nn el

/8

(1 6m m w id e ex po se d fr am e an d

2- 7/

(6 2m m ) s id e de pt h.

H ad ria n’ s ex cl us iv e fr am e siz e of fe rs w id e do or o pe ni ng a nd ea se o f i ns ta lli ng e xt ra d ee p fr am e on to b od y, e sp ec ia lly w he n riv et s a re u se d fo r a ss em bl y.

T he fr am e sh al l b e co m pl et ed b y 3"

(7 6m m ) h ig h to p an d bo tt om c ro ss m em be rs o f no t le ss t ha n g au ge f or m ed a s an o pe n bo x ch an ne l a nd w el de d to th e ve rt ic al s.

Th e bo tt om fr am es

’ f ul l-w id th li nt el e xt en ds b ac k an d do w n to fo rm a rig id b ox t o su pp or t th e bo tt om s he lf.

B ot h ve rt ic al f ra m e m em be rs s ha ll be f or m ed t o of fe r a fu ll-le ng th

7/

(1

1m m w id e co nt in uo us d oo r st rik e.

T he l at ch v er tic al m em be r sh al l in cl ud e a w el de d g au ge pa dl oc k ha sp to ge th er w ith a

/1 6"

(1 1m m ) O

.D . a ir-cu sh io ne d ru bb er b um pe r.

N o fa st en er s s ha ll be e xp os ed on f ro nt s of lo ck er d oo rs a nd f ra m es

D o

F a m e s

H D E m p e r o r S p e c R

P M

P a g e millernl

LK-1

Si de s a nd b ac ks sh al l b e no le ss th an ga ug e an d sh ou ld n ot c on ta in e xt ra u nn ec es sa ry ho le s u nl es s o th er w ise sp ec ifi ca lly u se d fo r t he a ss em bl y o f t he lo ck er s a nd a cc es so rie s o n th e pr oj ec t.

Ed ge s sh al l b e fo rm ed t o pr ov id e a st ro ng a nd r ig id a ss em bl y w he n bo lte d or riv et ed t og et he r.

Lo ck er b ac ks a re f la ng ed a t rig ht a ng le s pr ov id in g a tr ip le t hi ck ne ss o f m et al a t t he b ac k co rn er c on ne ct io ns

. S he lv es

, t op s a nd b ot to m s s ha ll be in te rc ha ng ea bl e, no t le ss t ha n g au ge a nd f or m ed in to a s tu rd y pa n w ith a li p fo rm ed f ro nt e dg e fo r ad di tio na l s tr en gt h an d sa fe ty

A f ul l-l en gt h g au ge c on ti nu ou s pi an o hi ng e sh al l be s ec ur el y w el de d to t he fr am e an d fa st en ed t o th e do or w it h sc re w s or r iv et s.

H in ge s ha ll m ax im iz e se cu ri ty a nd e nh an ce r es is ta nc e to a bu se a nd v an da lis m

Tr ou bl e-fr ee u se is a ch ie ve d w ith n o sli di ng ro ds , s pr in gs , t ur nh an dl es o r m ov in g la tc he s.

A n g au ge

2" m m x

3/ 4" m m pa dl oc k ha sp s ha ll be s ec ur el y w el de d to t he co nt in uo us st rik e m id w ay u p on th e fr am e an d ce nt er ed a t t he h an dl e lo ca tio n.

T he h as p sh al l b e fo rm ed t o pr ot ru de t hr ou gh a n ex tr ud ed a lu m in um r ec es se d ha nd le , w hi ch is cli pl oc ke d an d bo nd ed to th e do or

. T he h an dl e’ s i nn er su rf ac e sh al l b e co nc av e an d gr oo ve d fo r f in ge rt ip d oo r c on tr ol . T o ke ep th e do or cl os ed w he n no t i n us e, a

/2

(1 3m m ) O

.D . n yl on fr ict io n ca tc h sh al l b e in st al le d on th e do or to e ng ag e th e fr am e in fo ur

(4 ) l oc at io ns

. P ad lo ck is st an da rd . F or b ui lt-in lo ck s

(c om bi na tio n, k ey o r co in

/ca rd o pe ra te

d) t he h as p sh al l b e re pl ac ed w ith a sp ec ia l 1 ga ug e se cu rit y s tr ik e w el de d to th e fr am e’ s c on tin uo us d oo r s tr ik e.

Th e lo ck b ol t s ha ll se cu re it se lf be hi nd th e st rik e.

A cc es s t o th e se cu re d bo lt sh al l b e de ni ed by th e fu ll le ng th st op o n th e do or fr am e an d by th e to p lip o f t he st rik e pr oj ec tin g fo rw ar d an d fit tin g in to…