Attachment 2 - Performance Specification Compliance Matrix.xlsx
XLSX spreadsheet 46 KB Posted
- Solicitation number
- W912CH-26-S-0001
- Issued by
-
Department of the Army
About this file
This is a Performance Specification Compliance Matrix template designed for vendors to document their system compliance against detailed performance requirements for an advanced ground-mounted targeting and reconnaissance system. The matrix requires vendors to provide compliance status, proposed variances or deviations, contractor specification numbers, test verification methods, and explanatory remarks for each specification paragraph.
The specifications encompass multiple operational categories including legacy system compatibility (LRAS3 vehicles, FS3 vehicles, and tripod-mounted configurations), vehicle-mounted and powered yoke interfaces, imaging sensors (thermal, visible, and short-wave infrared), far target location and positioning/navigation/timing capabilities, laser rangefinding, cross-platform laser reception, laser designation systems, boresighting requirements, user displays and video ports, communication protocols (Gigabit Ethernet, audio, legacy networking), user interface controls (handgrips, power controls), automation and artificial intelligence target detection and recognition, optical threat detection hosting, additional capabilities (UAS detection, indirect-fire detection, weapon cueing), system characteristics (startup time, weight limits, reliability, power management, electromagnetic compatibility, environmental durability), logistics and maintenance procedures, training program requirements, and system growth provisions. Vendors must mark specifications as either "Required" or indicate their intended compliance level, with mandatory explanations for any non-compliance or proposed deviations. This matrix serves as the primary evaluation tool for assessing vendor proposals against government performance requirements.
View the file
Other files
Show 40 more
50 files listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Instructions
| Instructions for Performance Specification Matrix tab: |
| - Vendor SHALL provide selections and explanations for any items that is "Required" |
| - Vendor SHALL provide an explanation for any "Compliance Status" that is not "Meets" |
| - Vendor Should provide a corresponding "Contractor Specification No" for ease of comparison to the Government P-SPEC |
| - Vendor SHALL select an appropriate "Test Verification Method" for any specification that is required or is proposed to meet, partially meet, or deviation |
| - Vendor Should provide "Compliance Status" to any specification paragraph that they intend to propose and provide amplifying comments in other columns |
Specifications
| Paragraph No. | Short Description | Required | Compliance Status | Proposed Variances, Deviation from Spec, Explanation | Contractor Specification No | Test Verification Method | Additional Remarks |
| 3.3 | Operating interface configurations | ||||||
| 3.3.1 | Legacy LRAS3 vehicle mounting | ||||||
| 3.3.1.1 | Mount legacy vehicle yokes | Required | |||||
| 3.3.1.2 | Survive vehicle-mounted operation | ||||||
| 3.3.1.3 | Use legacy LRAS3 power | Required | |||||
| 3.3.1.4 | Use legacy LRAS3 data | ||||||
| 3.3.2 | Legacy FS3 vehicle mounting | ||||||
| 3.3.2.1 | Mount legacy FS3 yokes | ||||||
| 3.3.2.1.1 | Operate at engine idle | ||||||
| 3.3.2.1.2 | Survive FS3 vehicle movement | ||||||
| 3.3.2.2 | Interface FS3 mission equipment | ||||||
| 3.3.3 | Tripod dismounted yoke | ||||||
| 3.3.3.1 | Mount legacy TDY | Required | |||||
| 3.3.3.2 | Provide improved batteries | ||||||
| 3.3.3.2.1 | Battery runtime duration | ||||||
| 3.3.3.2.2 | Provide power-saving mode | ||||||
| 3.3.3.2.3 | Lightweight ganged battery capability | ||||||
| 3.3.3.3 | Use legacy dismounted batteries | ||||||
| 3.3.3.4 | Display battery status | ||||||
| 3.3.3.5 | Provide improved TDY | ||||||
| 3.3.4 | Powered vehicle-mounted yokes | ||||||
| 3.3.4.1 | Include powered vehicle yoke | ||||||
| 3.3.4.2 | Remote under-armor operation | ||||||
| 3.3.4.3 | Remote operation while moving | ||||||
| 3.3.4.3.1 | Interface FLIR steering mirror | ||||||
| 3.3.4.4 | Provide added computing capacity | ||||||
| 3.3.4.5 | Provide TSN Ethernet port | ||||||
| 3.3.4.6 | Provide manual-mode failsafe | ||||||
| 3.3.4.7 | Provide required sensor travel | ||||||
| 3.3.4.8 | Provide PVMY interfaces | ||||||
| 3.3.5 | Remote operation mode | ||||||
| 3.3.5.1 | Support PTU remote operation | ||||||
| 3.3.5.1.1 | Remote functions over Ethernet | ||||||
| 3.3.5.1.2 | Two-step remote laser firing | ||||||
| 3.3.5.2 | Maintain legacy remote connections | ||||||
| 3.3.6 | FALCONS vehicle-mounted yoke | ||||||
| 3.3.6.1 | Provide modern manual yoke | ||||||
| 3.3.6.2 | Provide updated vehicle cables | ||||||
| 3.3.6.2.1 | Communicate with host systems | Required | |||||
| 3.3.6.2.1.1 | Cursor-on-Target | ||||||
| 3.3.6.2.2 | I-Kit interference | ||||||
| 3.3.6.3 | Yoke FOR | ||||||
| 3.3.6.4 | Lock yoke positioning axes | ||||||
| 3.4 | Imaging sensors | ||||||
| 3.4.1 | Thermal | ||||||
| 3.4.1.1 | Incorporate 3GEN FLIR B-Kit | Required | |||||
| 3.4.1.1.1 | Maintain B-Kit compatibility | ||||||
| 3.4.1.2 | Retain B-Kit functionality | ||||||
| 3.4.1.2.1 | Provide digital zoom levels | ||||||
| 3.4.1.3 | Window transmissivity | ||||||
| 3.4.1.4 | Avoid matched component sets | Required | |||||
| 3.4.1.4.1 | Ensure component interchangeability | Required | |||||
| 3.4.1.5 | Support alternate export sensors | ||||||
| 3.4.1.6 | Provide long-range target DRI | Required | |||||
| 3.4.2 | Visible sensor | ||||||
| 3.4.2.1 | Camera Field of View | Required | |||||
| 3.4.2.1.1 | Provide visible-camera resolution | Required | |||||
| 3.4.2.2 | Provide visible target DRI | Required | |||||
| 3.4.2.2.1 | Frame rate | ||||||
| 3.4.2.2.2 | Three color sensitivity | Required | |||||
| 3.4.2.2.3 | UNFOV focus range | ||||||
| 3.4.2.2.4 | NFOV focus range | ||||||
| 3.4.2.2.5 | MFOV focus range | ||||||
| 3.4.2.2.6 | WFOV focus range | ||||||
| 3.4.2.2.7 | FOV switching time | ||||||
| 3.4.2.2.8 | Automatic focus | ||||||
| 3.4.2.2.9 | Digital Zoom | ||||||
| 3.4.2.3 | Image stabilization | ||||||
| 3.4.2.3.1 | Stabilization selectability | ||||||
| 3.4.2.3.2 | Stabilization latency | ||||||
| 3.4.2.4 | Visible EOCCM | Required | |||||
| 3.4.2.4.1 | Reserved | ||||||
| 3.4.2.4.2 | Filter wheel growth | ||||||
| 3.4.2.4.3 | Provide visible sensor shutter | Required | |||||
| 3.4.2.5 | Provide automatic focus | ||||||
| 3.4.2.6 | Provide manual focus control | ||||||
| 3.4.3 | Short-wave infrared camera | ||||||
| 3.4.3.1 | Incorporate SWIR camera | ||||||
| 3.4.3.1.1 | Support targeting with SWIR | ||||||
| 3.4.3.2 | Detect required laser wavelengths | ||||||
| 3.4.3.3 | Provide SWIR shutter timing | ||||||
| 3.4.3.4 | Detect CPPLR laser spots | ||||||
| 3.4.3.4.1 | Reserved | ||||||
| 3.4.3.5 | Provide SWIR laser protection | ||||||
| 3.5 | Far Target Location (FTL) and PNT | ||||||
| 3.5.1 | FTL | ||||||
| 3.5.1.1 | FTL Accuracy | Required | |||||
| 3.5.1.1.1 | FTL on VPMY | ||||||
| 3.5.1.2 | FTL Figure of Merit | ||||||
| 3.5.1.3 | Estimate target-location error | Required | |||||
| 3.5.1.3.1 | Transmit SE90 target data | Required | |||||
| 3.5.1.3.2 | Display CE90, VE90, SE90 | ||||||
| 3.5.1.4 | Calculate FTL when degraded | Required | |||||
| 3.5.1.4.1 | Meet high-latitude FTL accuracy | Required | |||||
| 3.5.1.4.2 | Reserved | ||||||
| 3.5.1.4.3 | Alert for excessive FTL error | ||||||
| 3.5.1.4.4 | Provide available FTL solutions | ||||||
| 3.5.1.5 | Incorporate M-Code GPS | Required | |||||
| 3.5.1.5.1 | Use approved M-Code receiver | Required | |||||
| 3.5.1.5.1.1 | Meet receiver interface specifications | ||||||
| 3.5.1.5.2 | Provide GPS keying ports | Required | |||||
| 3.5.1.5.3 | Zeroize GPS receiver keys | Required | |||||
| 3.5.1.5.4 | Hot-start GPS receiver | ||||||
| 3.5.1.5.5 | Provide GPS keep-alive power | Required | |||||
| 3.5.1.5.5.1 | Sustain keep-alive power | ||||||
| 3.5.1.5.6 | Use external PNT receivers | ||||||
| 3.5.1.5.7 | Integrate M-Code antenna | Required | |||||
| 3.5.1.5.7.1 | Provide anti-jam GPS antenna | ||||||
| 3.5.1.5.8 | Support external M-Code antenna | ||||||
| 3.5.1.5.9 | Interface with DAPS | ||||||
| 3.5.1.6 | Provide commercial GNSS receiver | ||||||
| 3.5.1.6.1 | Exclude non-friendly constellations | ||||||
| 3.5.1.6.2 | Integrate commercial GNSS antenna | ||||||
| 3.5.1.7 | Accept external self-position | ||||||
| 3.5.1.8 | Operate in GNSS-denied environments | Required | |||||
| 3.5.1.8.1 | Meet APNT and NAVWAR policy | Required | |||||
| 3.5.1.8.1.1 | GNSS denied environment | Required | |||||
| 3.5.1.8.1.2 | user defined alerts | ||||||
| 3.5.1.8.1.3 | Maintain stationary denied-GNSS position | ||||||
| 3.5.1.8.1.4 | Maintain moving denied-GNSS position | ||||||
| 3.5.1.8.1.5 | Maintain stationary denied-GNSS position | ||||||
| 3.5.1.8.1.6 | Maintain extended denied-GNSS position | ||||||
| 3.5.1.8.2 | Fuse multiple PNT inputs | ||||||
| 3.5.1.8.3 | Use alternate-navigation PNT signals | ||||||
| 3.5.1.8.4 | Export self-position to platform | ||||||
| 3.5.2 | North finding | ||||||
| 3.5.2.1 | Provide internal north finding | ||||||
| 3.5.2.2 | Minimize northfinding initialization | Required | |||||
| 3.5.2.3 | Initialize under mounting conditions | Required | |||||
| 3.5.2.4 | Initialize while system moves | ||||||
| 3.5.2.5 | Accept external northfinding input | ||||||
| 3.5.2.6 | Provide northfinding redundancy | ||||||
| 3.5.3 | Laser range finder | ||||||
| 3.5.3.1 | Incorporate compliant laser rangefinder | Required | |||||
| 3.5.3.2 | Laser latency | Required | |||||
| 3.5.3.3 | Measure laser firing delay | ||||||
| 3.6 | Cross-platform laser receiver | ||||||
| 3.6.1 | Provide CPPLR capability | ||||||
| 3.6.2 | Display tracked laser spots | ||||||
| 3.6.2.1 | Meet center-overlay accuracy | ||||||
| 3.6.2.2 | Meet full-FOV overlay accuracy | ||||||
| 3.7 | Laser designation | ||||||
| 3.7.1 | Laser designation capability | ||||||
| 3.7.1.1 | Provide laser designator capability | Required | |||||
| 3.7.1.2 | Provide laser firing disable | Required | |||||
| 3.7.1.3 | Meet laser designation range | Required | |||||
| 3.7.1.4 | Laser PRF | Required | |||||
| 3.7.1.5 | Auto disable | ||||||
| 3.7.1.6 | laser spot projection | Required | |||||
| 3.7.1.7 | LDM/DLDM | ||||||
| 3.7.1.8 | laser armed notification | Required | |||||
| 3.7.1.9 | refresh rates | Required | |||||
| 3.7.2 | Laser placement | ||||||
| 3.7.2.1 | Avoid function interference | Required | |||||
| 3.7.2.2 | Allow laser-related adaptations | Required | |||||
| 3.7.2.3 | Provide laser mounting datum | Required | |||||
| 3.8 | Boresighting | ||||||
| 3.8.1 | Boresight requirements | ||||||
| 3.8.1.1 | Boresight cameras to LRF | ||||||
| 3.8.1.1.1 | Align camera FOV centers | ||||||
| 3.8.1.1.2 | Meet camera-LRF bore accuracy | Required | |||||
| 3.8.1.2 | Boresight northfinding to LRF | Required | |||||
| 3.8.1.3 | Center laser designator spot | ||||||
| 3.8.1.4 | Avoid ancillary boresight equipment | ||||||
| 3.8.1.5 | Automate boresighting process | ||||||
| 3.8.1.5.1 | Limit boresight personnel and time | ||||||
| 3.8.1.6 | Maintain boresight over time | ||||||
| 3.8.1.6.1 | Notify estimated boresight loss | ||||||
| 3.8.1.6.2 | Use boresight in FTL FOM | ||||||
| 3.8.1.7 | Provide calibrated reference datums | ||||||
| 3.8.1.7.1 | Meet datum alignment tolerance | ||||||
| 3.8.1.7.2 | Support auxiliary-system mounting | ||||||
| 3.8.1.7.2.1 | Support auxiliary mounting load | ||||||
| 3.8.1.7.2.2 | Support auxiliary shock loads | ||||||
| 3.9 | User displays and video ports | ||||||
| 3.9.1 | On-platform display | ||||||
| 3.9.1.1 | Provide integrated system display | Required | |||||
| 3.9.1.1.1 | Display matching FOVS | Required | |||||
| 3.9.1.1.2 | refresh rates | ||||||
| 3.9.1.1.2.1 | image artifacts and intermittent operation | Required | |||||
| 3.9.1.1.2.2 | Image persistence | ||||||
| 3.9.1.1.3 | Persistent residual features | ||||||
| 3.9.1.1.4 | FOV uniformity | ||||||
| 3.9.1.1.4.1 | Spurious Images and noise | ||||||
| 3.9.1.1.5 | Defective Pixels | ||||||
| 3.9.1.1.6 | gamma-corrected color imagery | ||||||
| 3.9.1.1.6.1 | Color uniformity | ||||||
| 3.9.1.1.6.2 | White color | ||||||
| 3.9.1.1.6.3 | Color checking | ||||||
| 3.9.1.1.7 | Variable brightness | Required | |||||
| 3.9.1.1.7.1 | Provide adjustable display brightness | Required | |||||
| 3.9.1.1.7.2 | Provide display blackout mode | ||||||
| 3.9.1.1.8 | Minimize display detectability | ||||||
| 3.9.1.1.9 | Provide 256 gray levels | ||||||
| 3.9.1.1.9.1 | monotonically increasing gray bars | ||||||
| 3.9.1.1.10 | eye strain | ||||||
| 3.9.1.1.11 | optional display | ||||||
| 3.9.1.1.12 | screen protector | ||||||
| 3.9.1.1.13 | latency | Required | |||||
| 3.9.1.2 | TSIS | ||||||
| 3.9.1.2.1 | TSIS use | ||||||
| 3.9.1.2.2 | Display inclusions | ||||||
| 3.9.1.3 | Select camera feeds | ||||||
| 3.9.2 | External display and video ports | ||||||
| 3.9.2.1 | Provide CoaXPress video output | ||||||
| 3.9.2.2 | commercial video port | ||||||
| 3.9.2.2.1 | hardwire video distance | ||||||
| 3.9.2.3 | Video over IP | ||||||
| 3.9.2.3.1 | video compression and frame rate adjustment | ||||||
| 3.9.2.3.2 | H.266 | ||||||
| 3.9.2.4 | Telemetry over IP | ||||||
| 3.9.2.4.1 | video streams | ||||||
| 3.9.2.5 | commercial standard port | ||||||
| 3.9.2.6 | ISW | ||||||
| 3.9.2.7 | external video feeds | ||||||
| 3.10 | Communication | ||||||
| 3.10.1 | Gigabit Ethernet | ||||||
| 3.10.1.1 | GigE | Required | |||||
| 3.10.1.2 | Provide second Ethernet connection | ||||||
| 3.10.1.3 | Provide RJ45 Ethernet connection | ||||||
| 3.10.2 | Audio | ||||||
| 3.10.2.1 | Provide training audio port | ||||||
| 3.10.2.2 | Provide military audio connector | ||||||
| 3.10.2.3 | Provide audio volume control | ||||||
| 3.10.2.4 | Exclude system speakers | ||||||
| 3.10.3 | Legacy network compatibility | ||||||
| 3.10.3.1 | Support legacy LRAS3 networking | Required | |||||
| 3.10.3.2 | Automatically annotate media | ||||||
| 3.10.3.3 | Maintain volatile entity database | Required | |||||
| 3.10.3.3.1 | Display stored entity information | ||||||
| 3.10.3.3.2 | Delete oldest stored entity | ||||||
| 3.10.3.3.3 | Maintain 1,023 entities | ||||||
| 3.10.3.4 | Slew to stored entities | ||||||
| 3.10.3.5 | Warn of friendly units | ||||||
| 3.10.3.6 | Support existing LRAS3 infrastructure | ||||||
| 3.10.3.7 | Interface PF-D/M platforms | Required | |||||
| 3.10.4 | Network compatibility and communication | ||||||
| 3.10.4.1 | Support SOSA standard | ||||||
| 3.10.4.2 | GCIA | ||||||
| 3.10.4.3 | ISA | ||||||
| 3.10.4.4 | RMF | Required | |||||
| 3.10.4.5 | command line | Required | |||||
| 3.10.4.6 | Reserved | ||||||
| 3.10.4.7 | Use approved reprogramming mechanisms | Required | |||||
| 3.10.4.8 | Authenticate new software images | Required | |||||
| 3.10.4.9 | Use SHA-256 digital signatures | Required | |||||
| 3.10.4.10 | Harden Ethernet interfaces | Required | |||||
| 3.10.4.11 | Provide root-of-trust controls | Required | |||||
| 3.10.4.12 | Drop invalid network messages | Required | |||||
| 3.10.4.13 | Avoid nonvolatile mission retention | Required | |||||
| 3.10.4.14 | Execute software from RAM | Required | |||||
| 3.10.4.15 | Provide system zeroize function | ||||||
| 3.10.5 | Provide ISW and SoINET | ||||||
| 3.11 | User interface | ||||||
| 3.11.1 | Handgrips | ||||||
| 3.11.1.1 | Provide mission-control handgrips | Required | |||||
| 3.11.1.2 | Handgrips controls | ||||||
| 3.11.1.2.1 | Fire LRF on release | ||||||
| 3.11.1.2.2 | Provide additional handgrip buttons | ||||||
| 3.11.1.2.3 | Guard laser designator button | Required | |||||
| 3.11.1.2.4 | Use red laser buttons | Required | |||||
| 3.11.1.2.5 | Require continuous laser depression | Required | |||||
| 3.11.1.3 | Support MOPP task performance | ||||||
| 3.11.1.4 | Consider handgrip ergonomics | ||||||
| 3.11.1.5 | Provide field-replaceable handgrips | ||||||
| 3.11.1.6 | Retract protruding handgrips | ||||||
| 3.11.1.7 | engineered break points | ||||||
| 3.11.2 | remote functions | ||||||
| 3.11.2.1 | handgrip over ethernet | ||||||
| 3.11.2.1.1 | two-step laser fire | ||||||
| 3.11.2.1.2 | non-eyesafe laser | ||||||
| 3.11.2.2 | GUI bypass | ||||||
| 3.11.3 | power controls | ||||||
| 3.11.3.1 | physical switch | Required | |||||
| 3.11.3.1.1 | Provide power-off mode | Required | |||||
| 3.11.3.1.2 | Provide standby mode | ||||||
| 3.11.3.1.3 | Provide selectable power-on modes | ||||||
| 3.12 | Automation and intelligence | ||||||
| 3.12.1 | AiTDR | ||||||
| 3.12.1.1 | Incorporate target-recognition algorithms | Required | |||||
| 3.12.1.1.1 | Process thermal and visible video | Required | |||||
| 3.12.1.1.2 | Process full-range sensor video | ||||||
| 3.12.1.1.2.1 | Select thermal video feeds | ||||||
| 3.12.1.1.2.2 | Day camera AiTDR | ||||||
| 3.12.1.1.3 | frame rate | ||||||
| 3.12.1.1.4 | Support CNN detection pipeline | ||||||
| 3.12.1.1.5 | Run AiTDR concurrently | ||||||
| 3.12.1.1.6 | Provide low-power AiTDR mode | ||||||
| 3.12.1.1.7 | Disable AiTDR for low power | Required | |||||
| 3.12.1.1.8 | Reserve AiTDR storage | ||||||
| 3.12.1.2 | Maintain tracking during movement | ||||||
| 3.12.1.3 | Track through countermeasures | ||||||
| 3.12.1.4 | Recover obscured target tracking | ||||||
| 3.12.1.5 | Maintain tracking on stabilized yoke | ||||||
| 3.12.1.6 | Automatically recognize target types | ||||||
| 3.12.1.7 | Export AiTDR-marked imagery | ||||||
| 3.12.1.7.1 | Display AiTDR overlays onboard | ||||||
| 3.12.1.7.2 | Export AiTDR data externally | ||||||
| 3.13 | Optical threat detection system | ||||||
| 3.13.1 | Host external OTD system | ||||||
| 3.13.2 | Separately power OTD system | ||||||
| 3.13.3 | Provide modular OTD system | ||||||
| 3.13.3.1 | Interface using OTD ICD | ||||||
| 3.13.3.2 | Avoid OTD function interference | ||||||
| 3.13.3.3 | Avoid OTD mounting accessories | ||||||
| 3.13.4 | Preserve laser-designator mounting | ||||||
| 3.13.5 | Communicate with OTD Ethernet | ||||||
| 3.13.5.1 | Overlay OTD information | ||||||
| 3.13.5.2 | Command OTD search modes | ||||||
| 3.13.5.3 | Send OTD user commands | ||||||
| 3.14 | Additional Capabilities | ||||||
| 3.14.1 | Cue platform weapons automatically | ||||||
| 3.14.2 | Detect Group 1/2 UAS | Required | |||||
| 3.14.3 | Detect indirect-fire signatures | ||||||
| 3.14.4 | Overlay external georegistered data | ||||||
| 3.14.5 | picatinny rail | ||||||
| 3.15 | System Characteristics | ||||||
| 3.15.1 | startup time | Required | |||||
| 3.15.1.1 | degraded mode during startup | ||||||
| 3.15.1.2 | stationary startup | ||||||
| 3.15.2 | moving startup | ||||||
| 3.15.3 | Minimize startup user interaction | ||||||
| 3.15.3.1 | Limit startup interaction time | ||||||
| 3.15.4 | Reserved | ||||||
| 3.15.5 | Limit component weight | Required | |||||
| 3.15.6 | Minimize system reflections | Required | |||||
| 3.15.7 | optical radiation | Required | |||||
| 3.15.8 | aural non-detectability | Required | |||||
| 3.15.9 | soldering | ||||||
| 3.15.10 | CCA standards | ||||||
| 3.15.10.1 | Reserved | ||||||
| 3.15.10.2 | Allow lead-free components | ||||||
| 3.15.11 | Reliability | ||||||
| 3.15.11.1 | Complete combat operation reliably | ||||||
| 3.15.11.2 | Meet essential-function MTBEFF | ||||||
| 3.15.12 | System, Vehicle, DC Power | ||||||
| 3.15.12.1 | Limit steady-state power draw | ||||||
| 3.15.12.2 | inrush | ||||||
| 3.15.13 | runtime | ||||||
| 3.15.14 | EMI | ||||||
| 3.15.14.1 | Conducted emissions RF | Required | |||||
| 3.15.14.2 | Conducted emissions antenna | Required | |||||
| 3.15.14.3 | CS power leads | Required | |||||
| 3.15.14.4 | CS cable injection | Required | |||||
| 3.15.14.5 | CS cable injection, Impulse Excitation | Required | |||||
| 3.15.14.6 | CS Sinusoidal, cables and power leads | Required | |||||
| 3.15.14.7 | CS cable , electrostatic discharge | Required | |||||
| 3.15.14.8 | System, Radiation, Emissions | Required | |||||
| 3.15.14.9 | System, Radiation, Susceptibility | Required | |||||
| 3.15.15 | Environment | ||||||
| 3.15.15.1 | Operational conditions, storage/transit | ||||||
| 3.15.15.1.1 | Operational temperature, degradation, DRI | Required | |||||
| 3.15.15.1.2 | Performance, degradation, transportation | Required | |||||
| 3.15.15.1.3 | Performance, degradation, high-temperature | ||||||
| 3.15.15.1.4 | Performance, degradation, low-temperature | ||||||
| 3.15.15.2 | System, Requirement, altitude | ||||||
| 3.15.15.3 | System, Requirement, humidity | ||||||
| 3.15.15.4 | Requirements, IPC (IP66/IP68), housing | Required | |||||
| 3.15.15.5 | Requirements, exposure, fungus/humidity/temp | ||||||
| 3.15.15.6 | Requirements, corrosion, electrical, physical | ||||||
| 3.15.15.7 | Requirements, operation, temperature/velocity | Required | |||||
| 3.15.15.8 | Requirements, exposure, fuel ATSM-D975 (diesel) | ||||||
| 3.15.15.9 | Requirements, damage, three sawtooth shocks | Required | |||||
| 3.15.15.10 | Requirements, vibrations, time per axis | ||||||
| 3.15.15.11 | System, decontamination, hardness, compatibility | ||||||
| 3.15.15.11.1 | System, decontamination, chemical/biological | ||||||
| 3.15.15.11.2 | System, decontamination, surface, assembly, | ||||||
| 3.15.15.11.2.1 | System, decontamination, surface (interior/exterior) | ||||||
| 3.15.16 | System, production, colors, handgrips, cables, knobs | ||||||
| 3.15.17 | System, operation, fatigue (display/handgrips/knobs) | ||||||
| 3.15.18 | System, materials, non-radioactive | Required | |||||
| 3.15.19 | System, safeguards against damage | Required | |||||
| 3.15.20 | System, individual components damage (carrying case/cover) | Required | |||||
| 3.15.21 | System not to use Hexavalent Chromium (Cr6+) | Required | |||||
| 3.15.22 | System, maintenance, hardware (IPC-A-610 /WHMA-A-620) | ||||||
| 3.15.22 | System, maintenance, parts, performance, durability, safety | ||||||
| 3.15.22 | System, maintenance, bolts, screws | ||||||
| 3.15.22 | System, maintenance, wires, cables (internal/external) | ||||||
| 3.15.22 | System, maintenance, shielding against contact/short | ||||||
| 3.15.22 | System, maintenance, plastic (no warping/blistering/scratches) | ||||||
| 3.15.22 | System, maintenance, metallic parts, performance/durability/safety/use) | ||||||
| 3.15.23 | Optical coating, delamination, cracking, pitting, scratching (MIL-PRF-13803) | ||||||
| 3.15.23 | Adhesion - tape pull cellophane tape | ||||||
| 3.15.23 | Humidity - temperature for no. of hours | ||||||
| 3.15.23 | Moderate abrasion - cheesecloth rub (50 strokes) | ||||||
| 3.15.23 | Severe abrasion - external surfaces, eraser | ||||||
| 3.15.23 | Temperature | ||||||
| 3.15.23 | Solubility - cleaning solutions (acetone, isopropyl/ alcohol/anti-fogging) | ||||||
| 3.16 | Logistics | ||||||
| 3.16.1 | Label components and connectors | ||||||
| 3.16.2 | Ensure parts interchangeability+B418B397B392:B42B392:B426 | ||||||
| 3.16.3 | Replace external optics individually | ||||||
| 3.16.4 | Replace life-limited items externally | ||||||
| 3.16.5 | Purge and leak-test optical component enclosures | Required | |||||
| 3.16.5.1 | Equalize environmental pressure - using vents and valves | Required | |||||
| 3.16.5.2 | Block NBC contaminants and moisture ingress - from entering system | ||||||
| 3.16.6 | Meet enclosure leak-rate threshold | ||||||
| 3.16.7 | Avoid operator-level special tools | ||||||
| 3.16.8 | Avoid Direct Support (DS-level) special tools | ||||||
| 3.16.9 | Support broad Soldier population - for operation, maintenance, repairs and support | ||||||
| 3.16.10 | Apply human-factors standards | ||||||
| 3.16.11 | Provide optics protective covers - | Required | |||||
| 3.16.11.1 | Optics cover shall be permanently attached to housing | ||||||
| 3.16.11.2 | Optics cover shall protect from debris impacts | ||||||
| 3.16.12 | Reprogram CCAs, 3GEN FLIR CCAs externally for routine maintenance | ||||||
| 3.16.13 | Reprogram smart CCAs externally | ||||||
| 3.16.14 | Provide CCA programming connection (JTAG) or similar for software maintenance | ||||||
| 3.16.15 | Provide built-in test capability - power-up, continuous, and operator initiated | ||||||
| 3.16.15.1 | Test all sparable components including user controls | ||||||
| 3.16.15.2 | Isolate failed Line-Replaceable-Units (LRU), Shop-Replaceable-Units (SRU) | ||||||
| 3.16.15.3 | Retain maintenance service indicators - from laser, components, cooler, BIT faults | ||||||
| 3.16.15.4 | Allow maintenance-data reset | ||||||
| 3.16.16 | Prevent incorrect component installation - electrically/mechanically | ||||||
| 3.16.17 | Meet repair-time limits (MTTR) | ||||||
| 3.17 | Training | ||||||
| 3.17.1 | Integrated training program | ||||||
| 3.17.1.1 | Provide simulated training mode - synthetic or recorded- video | ||||||
| 3.17.1.2 | Provide trainee performance feedback | ||||||
| 3.17.1.3 | Support training with and without audio | ||||||
| 3.18 | System growth | ||||||
| 3.18.1 | Reserve internal data throughput - internal data-buses | ||||||
| 3.18.2 | Reserve nonvolatile program memory | ||||||
| 3.18.3 | Reserve volatile program memory | ||||||
| 3.18.4 | Reserve computing and FPGA capacity for processing | ||||||
| 3.18.5 | Provide available CCA slot - additional CCA slot | ||||||
| 3.18.5.1 | Provide CCA, 3GEN FLIR, camera, interfaces - for Audio/Video/High-speed-data | ||||||
| 3.18.5.1.1 | Use standard CCA form factor - VMEBus Internal Trade Assoc. (VITA) | ||||||
| 3.18.5.2 | Provide external CCA connection | ||||||
| 3.19 | Other requirements | ||||||
| 3.19.1 | Meet classified specification requirements (MIL-PRF-A3315474) | Classified Specification will be provided to vendor(s) upon request of a proposal |
File details come from the government source that posted it. Updated .