Roof_Color_Chart.pdf
PDF 3 MB Posted
- Solicitation number
- W91248-17-R-0001
About this file
Roof Color
View the file
Other files
Show 40 more
Latest 50 of 60 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Color Chart Selections
COLOR CHART
• Final color selection should be made from actual color chips.
• For the most current information available, visit our website at www.starbuildings.com.
• See product catalog for gauge and color availability.
• Heavier gauges, narrower widths, striations and embossing minimize “oil canning.”
• All Signature® 300 and 300 Metallic are low gloss colors.
• A 25-year limited paint warranty available for all colors upon written request, please inquire.
(Outside the continental United States, please inquire.)
• Signature® is a registered trademark of NCI Group, Inc. KYNAR 500® is a registered trademark of Arkema, Inc. HYLAR 5000® is a registered trademark of Solvay Solexis.
ENERGY STAR
Qualified Color
What is Solar Reflectance Index (SRI)?
The SRI is used to determine compliance with LEED requirements and is calculated according to ASTM E 1980 using values for reflectance and emissivity. Emissivity is a material’s ability to release absorbed energy. To meet LEED requirements, a roofing material must have an SRI of 29 or higher for steep slope (above 2:12) roofing and an SRI value of 78 or higher for low slope (2:12 or less) roofing. For more information, please go to www.usgbc.org.
What is Solar Reflectivity (SR)?
Solar reflectivity or reflectance (SR) is the ability of a material to reflect solar energy from its surface back into the atmosphere. The
SR value is a number from 0 to 1.0. A value of 0 indicates that the material absorbs all solar energy and a value of 1.0 indicates it is all reflected. ENERGY STAR requires SR testing of both new and aged roof products. New products must have an SR value of 0.25 or higher for steep slope (above 2:12) roofing and an SR value of 0.65 or higher for low slope (2:12 or less) roofing. Aged testing takes 3 years to complete, so not all products that meet the initial requirements are qualified. For more information, please go to www.energystar.gov.
SIGNATURE® 200 | SILICONIZED POLYESTER | Polar White is a Straight Polyester.
POLAR WHITE
SR .58 SRI 69
FERN GREEN
SR .28 SRI 29
HAWAIIAN BLUE
SR .32 SRI 35
ASH GRAY
SR .48 SRI 56
RUSTIC RED
SR .36 SRI 40
CHARCOAL GRAY
SR .28 SRI 30
LIGHT STONE
SR .50 SRI 58
SADDLE TAN
SR .48 SRI 56
KOKO BROWN
SR .28 SRI 30
BURNISHED SLATE
SR .28 SRI 29
CRIMSON RED
SR .33 SRI 34
DESERT SAND
SR .42 SRI 48
COBALT BLUE
SR .28 SRI 27
SIGNATURE® 300 | KYNAR 500® | HYLAR 5000®
SNOW WHITE
SR .65 SRI 79
ALMOND
SR .63 SRI 76
SLATE GRAY
SR .37 SRI 41
HARBOR BLUE
SR .28 SRI 30
BROWNSTONE
SR .47 SRI 54
MEDIUM BRONZE
SR .33 SRI 36
CLASSIC GREEN
SR .28 SRI 30
BRITE RED
SR .49 SRI 55
COMMERCIAL/
INDUSTRIAL &
FASTAR COLORS
PBR
3/16"
36" 12"
4" 4" 4"
1"
3 5/64" 1 3/8" 1 1/4"
3/4"
AVP
36"
2⁵⁄₁₆"
¹⁄ ₄"
6" 6"
12"
¹⁄
₈"
CRAFTSMANTM SERIES
ARTISAN® SERIES
QWIKLOKTM
ARCHITECTURAL PANELS
CLASSIC® SERIES
SHADOWRIBTM
TRADITIONAL®
DOUBLE-LOK®
ULTRA-DEK®
NUWALL
FLEXLOK®
SB-12
LB-12
HB-12
S-12C
B-12C
16.0 Fluted
12.0 Flat
12”
12”
12”
12”
12”
SB-12
2” 2”
1”
2”
16 1
16 1
8 1
2”
2 10
12”
4” 1”
1”
4” 4”
L-12
L-12 (with Beads)
2 2
12”
2 1
2 1
12”
12”
2 1
12”
FW 120-0
FW 120-1 (with Bead)
FW 120-2 (with Beads)
4” 4” 4”
24”
3”
24”
16”
3”
SNAP-TOGETHER SYSTEM
12” and 18” Also Available
FIELD-SEAMED SYSTEM
12” and 18” Also Available
(Wall Panel)
P-12 (Roof Panel) 16” Also Available
LOKSEAM®
BATTENLOK®
SUPERLOK®
CURVED BATTENLOK®
NUWALL®
2 1
4 5
3”
3”
1”
12”
18”
16”
16”
4 1
16 2”
2”
16”
16 2”
12”
2 2 1
ILM-180-0
ILM-180-2 (with Beads)
ILM-240-0
24”
4 1
4 1
4 1
18”
18”
6” 6” 6”
ILM-240-2 (with Beads)
24”
4 1
6” 6” 6” 6”
ILM-240-3 (with Beads)
24”
2 1 6” 6” 6” 6”
12” 3 4 1
16” 3 4 1
DESIGNER SERIES®
DOUBLE-LOK®
Field Seamed System 12" and 18" also available
CRAFTSMANTM SERIES
ARTISAN® SERIES
QWIKLOKTM
ARCHITECTURAL PANELS
CLASSIC® SERIES
SHADOWRIBTM
TRADITIONAL®
DOUBLE-LOK®
ULTRA-DEK®
NUWALL
FLEXLOK®
SB-12
LB-12
HB-12
S-12C
B-12C
16.0 Fluted
12.0 Flat
12”
12”
12”
12”
12”
SB-12
2” 2”
1”
2”
16 1
16 1
8 1
2”
2 10
12”
4” 1”
1”
4” 4”
L-12
L-12 (with Beads)
2 2
12”
2 1
2 1
12”
12”
2 1
12”
FW 120-0
FW 120-1 (with Bead)
FW 120-2 (with Beads)
4” 4” 4”
24”
3”
24”
16”
3”
SNAP-TOGETHER SYSTEM
12” and 18” Also Available
FIELD-SEAMED SYSTEM
12” and 18” Also Available
(Wall Panel)
P-12 (Roof Panel) 16” Also Available
LOKSEAM®
BATTENLOK®
SUPERLOK®
4 5
3”
3”
1”
12”
18”
16”
16”
4 1
16 2”
2”
16”
16 2”
12”
2 2 1
ILM-180-0
ILM-180-2 (with Beads)
ILM-240-0
24”
4 1
4 1
4 1
18”
18”
6” 6” 6”
ILM-240-2 (with Beads)
24”
4 1
6” 6” 6” 6”
ILM-240-3 (with Beads)
24”
2 1 6” 6” 6” 6”
12” 3 4 1
16” 3 4 1
DESIGNER SERIES®
Field Seamed System 12" also available
BATTENLOK® HS
CRAFTSMANTM SERIES
ARTISAN® SERIES
QWIKLOKTM
ARCHITECTURAL PANELS
CLASSIC® SERIES
SHADOWRIBTM
TRADITIONAL®
DOUBLE-LOK®
ULTRA-DEK®
NUWALL
FLEXLOK®
SB-12
LB-12
HB-12
S-12C
B-12C
16.0 Fluted
12.0 Flat
12”
12”
12”
12”
12”
SB-12
2” 2”
1”
2”
16 1
16 1
8 1
2”
2 10
12”
4” 1”
1”
4” 4”
L-12
L-12 (with Beads)
2 2
12”
2 1
2 1
12”
12”
2 1
12”
FW 120-0
FW 120-1 (with Bead)
FW 120-2 (with Beads)
4” 4” 4”
24”
3”
24”
16”
3”
SNAP-TOGETHER SYSTEM
12” and 18” Also Available
FIELD-SEAMED SYSTEM
12” and 18” Also Available
(Wall Panel)
P-12 (Roof Panel) 16” Also Available
LOKSEAM®
BATTENLOK®
SUPERLOK®
4 5
3”
3”
1”
12”
18”
16”
16”
4 1
16 2”
2”
16”
16 2”
12”
2 2 1
ILM-180-0
ILM-180-2 (with Beads)
ILM-240-0
24”
4 1
4 1
4 1
18”
18”
6” 6” 6”
ILM-240-2 (with Beads)
24”
4 1
6” 6” 6” 6”
ILM-240-3 (with Beads)
24”
2 1 6” 6” 6” 6”
12” 3 4 1
16” 3 4 1
DESIGNER SERIES®
SUPERLOK®
Field Seamed System 12" also available
CRAFTSMANTM SERIES
ARTISAN® SERIES
QWIKLOKTM
ARCHITECTURAL PANELS
CLASSIC® SERIES
SHADOWRIBTM
TRADITIONAL®
DOUBLE-LOK®
ULTRA-DEK®
NUWALL
FLEXLOK®
SB-12
LB-12
HB-12
S-12C
B-12C
16.0 Fluted
12.0 Flat
12”
12”
12”
12”
12”
SB-12
2” 2”
1”
2”
16 1
16 1
8 1
2”
2 10
12”
4” 1”
1”
4” 4”
L-12
L-12 (with Beads)
2 2
12”
2 1
2 1
12”
12”
2 1
12”
FW 120-0
FW 120-1 (with Bead)
FW 120-2 (with Beads)
4” 4” 4”
24”
3”
24”
16”
3”
SNAP-TOGETHER SYSTEM
12” and 18” Also Available
FIELD-SEAMED SYSTEM
12” and 18” Also Available
(Wall Panel)
P-12 (Roof Panel) 16” Also Available
LOKSEAM®
BATTENLOK®
SUPERLOK®
4 5
3”
3”
1”
12”
18”
16”
16”
4 1
16 2”
2”
16”
16 2”
12”
2 2 1
ILM-180-0
ILM-180-2 (with Beads)
ILM-240-0
24”
4 1
4 1
4 1
18”
18”
6” 6” 6”
ILM-240-2 (with Beads)
24”
4 1
6” 6” 6” 6”
ILM-240-3 (with Beads)
24”
2 1 6” 6” 6” 6”
12” 3 4 1
16” 3 4 1
DESIGNER SERIES®
SHADOWRIB™
SIGNATURE® 300 Standard Colors | KYNAR 500® | HYLAR 5000®
SNOW WHITE
SR .65 SRI 79
ALMOND
SR .63 SRI 76
EVERGLADE
SR .33 SRI 36
NATURAL PATINA
SR .41 SRI 47
TUNDRA
SR .46 SRI 53
BROWNSTONE
SR .47 SRI 54
PACIFIC BLUE
SR .29 SRI 31
SPRUCE
SR .36 SRI 40
SLATE GRAY
SR .37 SRI 41
MEDIUM BRONZE
SR .33 SRI 36
HARBOR BLUE
SR .28 SRI 30
CLASSIC GREEN
SR .28 SRI 30
MIDNIGHT BRONZE
SR .29 SRI 31
BRITE RED
SR .49 SRI 55
COLONIAL RED
SR .34 SRI 37
HUNTER GREEN
SR .35 SRI 39
SIGNATURE® 300 Metallic | KYNAR 500® | HYLAR 5000®
Note: Metallic coatings are directional. Panels and trim must be installed oriented in the same direction to prevent perceived shade variances. Directional arrows are on the back side of panels and trim to aid in the proper orientation.
COPPER METALLIC
SR .45 SRI 51
SILVER METALLIC
SR .52 SRI 60
ARCHITECTURAL
COLORS
SIGNATURE® 200 Standard Colors | SILICONIZED POLYESTER | Polar White is a Straight Polyester.
HAWAIIAN BLUE
SR .32 SRI 35
POLAR WHITE
SR .58 SRI 69
RUSTIC RED
SR .36 SRI 40
BURNISHED SLATE
SR .28 SRI 29
FERN GREEN
SR .28 SRI 29
COAL BLACK
SR .30 SRI 31
LIGHT STONE
SR .50 SRI 58
KOKO BROWN
SR .28 SRI 30
CHARCOAL GRAY
SR .28 SRI 30
24"
3"
ULTRA-DEK®
Snap-Together System 12" and 18" also available
Star Building Systems, an NCI Company | 8600 South I-35, Oklahoma City, OK 73149 | www.StarBuildings.com | star.marketing@starbuildings.net For more information about how Star can add to your success, call 1-800-879-7827 or visit www.StarBuildings.com. Join the team you know you can depend on.
Signature® 200 SPECIFICATIONS Product Name Signature® 200, a premium coating with proven, proprietary polymer and premium pigments.
Product Description Uses: Signature® 200 is a factory-applied and oven-baked protective coating used on GALVALUME®, galvanized steel or aluminum substrate.
Signature® 200 combines excellent physical characteristics and aesthetic values for metal panels and components. Its uses in architectural, industrial, commercial, residential and institutional metal construction are numerous. Signature® 200 coatings are formulated for hardness and flexibility, making it a versatile and durable coating system when applied over a proprietary, corrosion-resistant primer.
Limitations: Since Signature® 200 coatings require baking to cure, they cannot be field applied. Signature® 200 coatings are not approved for use on hot or cold rolled bare steel substrates intended for exterior exposure.
Composition and Materials: Signature® 200 is a thermoset coating consisting of a proprietary polyester resin modified by silicone resin intermediate.
Signature® 200 uses premium, proven-durability ceramic pigments which give superior exterior protection and resistance to chemical corrosion and ultraviolet radiation.
Color: Signature® 200 coatings are available in a wide range of standard, field-proven colors. Special colors are available (minimum quantity requirements may apply) if approved by manufacturer. Polar White may not meet these specifications – please inquire.
Installation The Signature® 200 system is factory applied over metal substrates using the coil coating process. Surfaces shall be chemically cleaned and pretreated according to manufacturers’ specifications to remove contaminants and provide acceptable corrosion resistance. Total dry film thickness of topcoat (Signature® 200 protective coating and primer) is within the 0.9 - 1.05 range for coil coated applications. The pretreated substrate is primed with 0.2 - 0.25 mil of a high performance primer. The Signature® 200 protective coating is applied over the primed substrate at 0.7 - 0.8 mil. The Signature® 200 systems incorporate outstanding exterior durability, while affording superior coil line application and post-forming capabilities.
Warranty The Signature® 200 warranty is backed by the strictest production specifications and is one of the strongest in the industry. Details and further information are available by contacting the manufacturer.
Maintenance The factory applied finish of Signature® 200 is baked-on coating designed to give trouble-free performance for years with little service required. However, mild detergents and/or mineral spirits are recommended for removal of surface dust and airborne chemical deposits. Air-dry touch-up paints are also available for repair of minor scratches.
Technical Assistance Complete technical information and literature is available from manufacturer.
Signature® is a registered trademark of NCI Group, Inc.
KYNAR® 500 is a registered trademark of Arkema, Inc.
HYLAR® 5000 is a registered trademark of Solvay Solexis.
GALVALUME® is a registered trademark of BIEC International Inc.
Signature® 300 and Signature® 300 Metallic SPECIFICATIONS Product Name Signature® 300 and Signature® 300 Metallic, a premium fluoropolymer low gloss coating, produced with KYNAR® 500 or HYLAR® 5000 resin.
Product Description Basic Uses: Signature® 300 coatings are specified by leading architects and used by manufacturers of metal curtain wall and other building products as a long-life exterior finish for aluminum, galvanized steel and Galvalume®.
The liquid coating is factory applied and oven baked on properly prepared and primed substrates. Signature® 300 coatings typically are used as exterior finishes for metal roofing, siding, louvers, fascia, curtain wall, spandrel paneling and column covers. The building components can be post-formed from pre-coated coil stock.
Limitations: Since Signature® 300 coatings require baking to cure, they cannot be field applied. Signature® 300 coatings are not approved for use on hot or cold rolled bare steel substrates intended for exterior exposure.
Composition and Materials: Signature® 300 coatings are based on 70% KYNAR® 500 or HYLAR® 5000 PVDF fluoropolymer resin. They also are formulated with highly durable pigments and solvents blended for optimum application properties.
Color: Signature® 300 coatings are available in a wide range of standard, field-proven colors. Special colors are available (minimum quantity requirements may apply) if approved by manufacturer.
Technical Data See Chart Below.
Installation Signature® 300 coatings may be coil coated on HDG steel, Aluminum or Galvalume® substrates that have been pretreated and primed according to manufacturer specifications. The entire system is applied in the factory and oven baked. Topcoat dry film thicknesses are within the 0.9-1.1 mil range (Note: which refers to the combination of primer and the Signature® 300 protective coating) for coil coated applications.
The pretreated substrate is primed with 0.2 - 0.30 mil of a high performance primer. The Signature® 300 protective coating is applied over the primed substrate at 0.7 - 0.8 mil. The flexibility of the system permits coil-coated stock to be post-formed by either a roll former or press brake. All applicators of Signature® 300 coatings must have the approval of manufacturer. A list of approved applicators is available upon request.
Warranty The Signature® 300 warranty is backed by the strictest production specifications and is one of the strongest in the industry. Details and further information are available by contacting manufacturer.
Maintenance Signature® 300 coatings are virtually maintenance free and non-staining. If necessary, surface residue may be removed by conventional cleaning solvents or detergents. Minor scratches may be touched-up with a specially formulated, field-applied coating of the same color.
Signature® 300 coatings can be used in conjunction with conventional sealants and caulking compounds. Mortar, plaster, etc. will neither adhere to nor stain the surface.
Technical Assistance Complete technical information and literature is available from manufacturer.
Signature® is a registered trademark of NCI Group, Inc.
KYNAR® 500 is a registered trademark of Arkema, Inc.
HYLAR® 5000 is a registered trademark of Solvay Solexis.
GALVALUME® is a registered trademark of BIEC International Inc.
Descriptions and specifications contained herein were in effect at the time this publication was approved for printing. We reserve the right to discontinue products at any time or change specifications and/or designs without notice and without incurring obligation.
TECHNICAL DATA–PHYSICAL PROPERTIES
PROPERTY VALUE TEST DESIGNATION
(1) 2T to 4T, No loss of adhesion.
(2) No field blisters.
(3) ≤⅛ inch creep from scribe, few blisters, rating of 8.
(4) Chalk rating no less than 8. Color change, no more than 5∆E
Hunter units.
(5) 10% Hydrochloric acid solution 24 hours no visible changes.
25% sodium hydroxide 1 hour test no visible change.
Gloss @ 60° Film Hardness Impact Resistance, 3x Metal Thickness
Cross-Hatch Adhesion
Formability: T-Bend Abrasion Resistance, Falling Sand
ACCELERATED TESTS:
Humidity, 1,000 hrs.
Dew Cycle Weatherometer, 200 Total Hours Salt Spray, 1,000 hrs.
Chemical Spot Test
20-80 F-Min (Eagle Turq.)
No Adhesion Loss
No Adhesion Loss
(1) Acceptable 35 ± 5 Liters
(2) Acceptable
(4) Acceptable
(3) Acceptable
(5) Acceptable
ASTM D523
ASTM D3363
ASTM D2794
ASTM D3359
ASTM D4145
ASTM D968
ASTM D2247
ASTM D3361
ASTM B117
ASTM D1308
TECHNICAL DATA–PHYSICAL PROPERTIES
Property Value Test Designation (1) No evidence of cracking, and no loss of adhesion to the point of metal rupture.
(2) No removal of finish after 1/16-inch cross-hatching to bare metal, to impact limits or point of metal rupture.
(3) No cracking, peeling, blistering, loss of adhesion or corrosion of base metal. Chalk rating of 8 per ASTM D4214. Color change less than 2∆E per ASTM D2244.
(4) Rating of 10, no blistering, cracking, creepage or corrosion per
ASTM D1654.
(5) No more than 5/32-inch average creepage from scribed line rating of 7, field test rating of 8 per ASTM D1654.
(6) No more than 1/32-inch creepage from scribed line, rating of 8.
No blistering, rating of 10 per ASTM D1654.
(7) 10% Hydrochloric acid solution 24 hours no visible changes. 25% sodium hydroxide 1 hour test no color change, no blistering.
(8) Reverse impact and direct impact, no cracking or loss of adhesion.
Gloss @ 85° Film Hardness Impact Resistance, .5” Ball Indenter, 3x Metal Thickness
Formability:
180° bend around 1/8” mandrel Adhesion Abrasion Resistance, Falling Sand
Accelerated Weathering, 5,000 hrs. exposure Humidity, 3,000 hrs.
Salt Spray, 2,000 hrs.
Cyclic Salt Fog/UV exposure, 3,000 hrs.
Chemical Spot Test
8-15 HB-Min (Eagle Turq.)
(8) Acceptable
(1) Acceptable
(2) Acceptable
67 Liters
(3) Acceptable
(4) Acceptable
(5) Acceptable
(6) Acceptable
(7) Acceptable
ASTM D523
ASTM D3363 (NCCA II-12) (2)
ASTM D2794
ASTM D522
ASTM D3359 (NCCA II-5)
ASTM D968
ASTM D4587, G53, or G154 ASTM D2247, Apparatus A1
ASTM B117 (NCCA III-2)
ASTM D5894
ASTM D1308
File details come from the government source that posted it.