San Antonio MMC 244387 BL 2-24-26 ALD-510.xlsx

This file is a temperature data log from a multiChannel sterilization validation study conducted on a STERIS 20VS model sterilizer at San Antonio MMC (Medical Center) on February 24, 2026. The document records temperature measurements in Celsius at 2-second intervals over approximately 1 hour (from 10:39:26 AM to 12:03:48 PM), tracking the thermal performance of the "Back Left" chamber during a sterilization cycle. The data shows an initial stable ambient temperature around 24.8°C, followed by a controlled heating phase that gradually increases to approximately 122°C by 11:00 AM, maintains a plateau around 113-122°C for an extended period, then undergoes a cooling phase that descends back to approximately 25°C by the end of the monitoring period. The equipment is registered under serial number 033222532 and was tested at the Steris facility located at 1440 Prudential Drive in Dallas, TX, with the San Antonio site at 2899 Schofield Drive, TX 78234.

This temperature mapping data is directly relevant to the federal solicitation W81K0027QA015 issued by the Department of the Army Medical Command (MEDCOM), which seeks calibration and temperature mapping services for medical equipment. The temperature validation data documented in this file demonstrates the type of technical documentation and validation testing required to support equipment performance verification for military medical facilities, specifically tracking thermal uniformity and sterilization cycle performance that would be essential for compliance with military medical standards and operational readiness requirements.