San Antonio MMC 244386 BL 2-24-26 ALD-510.xlsx

This is a temperature monitoring data file from a Steris MultiChannel sterilization system located at San Antonio MMC (Medical Center) facility in San Antonio, Texas. The file contains temperature readings recorded on February 24, 2026, from approximately 12:08 PM to 1:16 PM, capturing a complete sterilization cycle for Channel 1 of the system. The device, identified as Model 20VS with Serial Number 033222531, shows temperature progression from an initial ambient temperature of approximately 27.77°C, rising through a controlled heating phase to peak temperatures exceeding 123°C during the sterilization process, and then cooling down to approximately 25°C by the end of the recorded cycle. The data appears to document a validation or qualification run, with temperature readings recorded at two-second intervals throughout the entire sterilization cycle, which is typical for calibration and temperature mapping verification required for medical sterilization equipment compliance and validation purposes in accordance with federal sterilization standards and FDA regulations governing medical device reprocessing equipment.